FCC ID 2AC49-R811USA2

WLAN 802.11a/b/g/n/ac module

by Sichuan Changhong Electronic Component Co., Ltd.

Grantee Code: 2AC49   Product Code: R811USA2
Latest application date: 2016-05-14

Device Images

FCC ID Device Details

FCC ID2AC49-R811USA2
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AC49
Product CodeR811USA2
Applicant BusinessSichuan Changhong Electronic Component Co., Ltd. 🇨🇳
Related Domains changhong.com
Equipment ClassWLAN 802.11a/b/g/n/ac module
Test FirmShenzhen CTL Testing Technology Co., Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzOriginal Equipment2016-05-14
2412-2462 MHzOriginal Equipment2016-05-14

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2016-05-14PDF 2 MB
Internal PhotosInternal Photos2016-05-14PDF 234 KB
External PhotosExternal Photos2016-05-14PDF 234 KB
LabelID Label/Location Info2016-05-14PDF 2.7 MB
Test Set Up PhotosTest Setup Photos2016-05-14PDF 199.5 KB
Test ReportTest Report2016-05-14PDF 3.4 MB
Confidentiality Metadata onlyCover Letter(s)2016-05-14PDF 17.4 KB
Cover letterCover Letter(s)2016-05-14PDF 42.6 KB
Declaration Metadata onlyCover Letter(s)2016-05-14PDF 529.3 KB
LMA Declaration Metadata onlyCover Letter(s)2016-05-14PDF 25.8 KB
Limited Modular Approval Letter Metadata onlyCover Letter(s)2016-05-14PDF 42.6 KB
RF Exposure Letter Metadata onlyRF Exposure Info2016-05-14PDF 1.1 MB
RF ExposureRF Exposure Info2016-05-14PDF 1.1 MB
RF Safety Metadata onlyRF Exposure Info2016-05-14PDF 1.1 MB
Block Diagram Metadata onlyBlock DiagramPDF 59.6 KB
Schematics Metadata onlySchematicsPDF 32 KB
Operational Description Metadata onlyOperational DescriptionPDF 1.6 MB
Software security Metadata onlySDR Software/Security InfPDF 529.3 KB

Application Information

Application IDkoTqfe8dGu5ZbvsD0RT1jw==
Final Action Date2016-05-14
Application PurposeOriginal Equipment
Applicant FRN0023737281
ModelR811USA2
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionWLAN 802.11a/b/g/n/ac module
Responsible PartyJiangyuan Wei, Manager, jiangyuan.wei@changhong.com , +86 13568428012
Test FirmTracy Qi, Shenzhen CTL Testing Technology Co., Ltd., qihui@ctl-lab.com , 86-755-89486194
TCB Emailstuart.beck@nemko.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentLimited Single Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsLimited Single Modular Approval. Power output listed is conducted. This device has a 20 MHz , 40 MHz and 80 MHz bandwidth mode. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.

Applications

Application IDDatePurpose
koTqfe8dGu5ZbvsD0RT1jw==2016-05-14Original Equipment
5B/PRwXOGJvAdQovn/RA/w==2016-05-14Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.059020015CCC
5180-5240 MHz0.0241515E38, CC
5745-5825 MHz0.03215E38, CC

Grants

TCB Grant - Application koTqfe8dGu5ZbvsD0RT1jw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Nemko North America, INC.
303 River Road
Ottawa, Ontario, K1V 1H2
Canada
Date of Grant: 05/14/2016

Application Dated: 05/13/2016
Sichuan Changhong Electronic Component Co., Ltd.
Luosheng street, Huagai Zhen, Anxian, Mianyang
Sichuan,
China
 
Attention: Jiangyuan Wei , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AC49-R811USA2
Name of Grantee:  Sichuan Changhong Electronic Component Co., Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: WLAN 802.11a/b/g/n/ac module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC 15E 5180.0  -  5240.0 0.02415  
38 CC 15E 5745.0  -  5825.0 0.032  

Limited Single Modular Approval. Power output listed is conducted. This device has a 20 MHz , 40 MHz and 80 MHz bandwidth mode. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.

38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application koTqfe8dGu5ZbvsD0RT1jw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Sichuan Changhong Electronic Component Co., Ltd.
Luosheng street, Huagai Zhen, Anxian, Mianyang
Sichuan,
China
  Date of Grant: 05/14/2016

Application Dated: 05/13/2016
 
Attention: Jiangyuan Wei , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AC49-R811USA2
Name of Grantee:  Sichuan Changhong Electronic Component Co., Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: WLAN 802.11a/b/g/n/ac module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC 15E 5180.0  -  5240.0 0.02415  
38 CC 15E 5745.0  -  5825.0 0.032  

Limited Single Modular Approval. Power output listed is conducted. This device has a 20 MHz , 40 MHz and 80 MHz bandwidth mode. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 5B/PRwXOGJvAdQovn/RA/w==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Nemko North America, INC.
303 River Road
Ottawa, Ontario, K1V 1H2
Canada
Date of Grant: 05/14/2016

Application Dated: 05/12/2016
Sichuan Changhong Electronic Component Co., Ltd.
Luosheng street, Huagai Zhen, Anxian, Mianyang
Sichuan,
China
 
Attention: Jiangyuan Wei , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AC49-R811USA2
Name of Grantee:  Sichuan Changhong Electronic Component Co., Ltd.
Equipment Class: Digital Transmission System
Notes: WLAN 802.11a/b/g/n/ac module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.05902  

Limited Single Modular Approval. Power output listed is conducted. This device has a 20 MHz and 40 MHz bandwidth mode. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application 5B/PRwXOGJvAdQovn/RA/w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Sichuan Changhong Electronic Component Co., Ltd.
Luosheng street, Huagai Zhen, Anxian, Mianyang
Sichuan,
China
  Date of Grant: 05/14/2016

Application Dated: 05/12/2016
 
Attention: Jiangyuan Wei , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AC49-R811USA2
Name of Grantee:  Sichuan Changhong Electronic Component Co., Ltd.
Equipment Class: Digital Transmission System
Notes: WLAN 802.11a/b/g/n/ac module
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.05902  

Limited Single Modular Approval. Power output listed is conducted. This device has a 20 MHz and 40 MHz bandwidth mode. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and End-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: