WT3 Electronic Thermometer Test Report HD 271 S1 Guangdong Biolight Meditech Co.,Ltd

Guangdong Biolight Meditech Co.,Ltd Electronic Thermometer

FCC ID Filing: 2AC6R-WT3
Purchase on Amazon: Electronic Thermometer

Trouble Viewing? See the or view the HTML Version or PDF in frame
Page 1 of WT3 Electronic Thermometer Test Report HD 271 S1 Guangdong Biolight Meditech Co.,Ltd
Page 2 of WT3 Electronic Thermometer Test Report HD 271 S1 Guangdong Biolight Meditech Co.,Ltd
Page 3 of WT3 Electronic Thermometer Test Report HD 271 S1 Guangdong Biolight Meditech Co.,Ltd
Page 4 of WT3 Electronic Thermometer Test Report HD 271 S1 Guangdong Biolight Meditech Co.,Ltd
Page 5 of WT3 Electronic Thermometer Test Report HD 271 S1 Guangdong Biolight Meditech Co.,Ltd
Page 6 of WT3 Electronic Thermometer Test Report HD 271 S1 Guangdong Biolight Meditech Co.,Ltd
Page 7 of WT3 Electronic Thermometer Test Report HD 271 S1 Guangdong Biolight Meditech Co.,Ltd
Page 8 of WT3 Electronic Thermometer Test Report HD 271 S1 Guangdong Biolight Meditech Co.,Ltd
Page 9 of WT3 Electronic Thermometer Test Report HD 271 S1 Guangdong Biolight Meditech Co.,Ltd
Page 10 of WT3 Electronic Thermometer Test Report HD 271 S1 Guangdong Biolight Meditech Co.,Ltd
Page 11 of WT3 Electronic Thermometer Test Report HD 271 S1 Guangdong Biolight Meditech Co.,Ltd
Page 12 of WT3 Electronic Thermometer Test Report HD 271 S1 Guangdong Biolight Meditech Co.,Ltd
Page 13 of WT3 Electronic Thermometer Test Report HD 271 S1 Guangdong Biolight Meditech Co.,Ltd
Page 14 of WT3 Electronic Thermometer Test Report HD 271 S1 Guangdong Biolight Meditech Co.,Ltd
Page 15 of WT3 Electronic Thermometer Test Report HD 271 S1 Guangdong Biolight Meditech Co.,Ltd
Page 16 of WT3 Electronic Thermometer Test Report HD 271 S1 Guangdong Biolight Meditech Co.,Ltd
Page 17 of WT3 Electronic Thermometer Test Report HD 271 S1 Guangdong Biolight Meditech Co.,Ltd
Page 18 of WT3 Electronic Thermometer Test Report HD 271 S1 Guangdong Biolight Meditech Co.,Ltd
Page 19 of WT3 Electronic Thermometer Test Report HD 271 S1 Guangdong Biolight Meditech Co.,Ltd
Page 20 of WT3 Electronic Thermometer Test Report HD 271 S1 Guangdong Biolight Meditech Co.,Ltd
Page 21 of WT3 Electronic Thermometer Test Report HD 271 S1 Guangdong Biolight Meditech Co.,Ltd
Page 22 of WT3 Electronic Thermometer Test Report HD 271 S1 Guangdong Biolight Meditech Co.,Ltd
Page 23 of WT3 Electronic Thermometer Test Report HD 271 S1 Guangdong Biolight Meditech Co.,Ltd
Page 24 of WT3 Electronic Thermometer Test Report HD 271 S1 Guangdong Biolight Meditech Co.,Ltd
Page 25 of WT3 Electronic Thermometer Test Report HD 271 S1 Guangdong Biolight Meditech Co.,Ltd
Page 26 of WT3 Electronic Thermometer Test Report HD 271 S1 Guangdong Biolight Meditech Co.,Ltd
Page 27 of WT3 Electronic Thermometer Test Report HD 271 S1 Guangdong Biolight Meditech Co.,Ltd
Page 28 of WT3 Electronic Thermometer Test Report HD 271 S1 Guangdong Biolight Meditech Co.,Ltd
Page 29 of WT3 Electronic Thermometer Test Report HD 271 S1 Guangdong Biolight Meditech Co.,Ltd
Page 30 of WT3 Electronic Thermometer Test Report HD 271 S1 Guangdong Biolight Meditech Co.,Ltd
Page 31 of WT3 Electronic Thermometer Test Report HD 271 S1 Guangdong Biolight Meditech Co.,Ltd
Page 32 of WT3 Electronic Thermometer Test Report HD 271 S1 Guangdong Biolight Meditech Co.,Ltd
Page 33 of WT3 Electronic Thermometer Test Report HD 271 S1 Guangdong Biolight Meditech Co.,Ltd
Page 34 of WT3 Electronic Thermometer Test Report HD 271 S1 Guangdong Biolight Meditech Co.,Ltd
Page 35 of WT3 Electronic Thermometer Test Report HD 271 S1 Guangdong Biolight Meditech Co.,Ltd
Page 36 of WT3 Electronic Thermometer Test Report HD 271 S1 Guangdong Biolight Meditech Co.,Ltd
Page 37 of WT3 Electronic Thermometer Test Report HD 271 S1 Guangdong Biolight Meditech Co.,Ltd
Page 38 of WT3 Electronic Thermometer Test Report HD 271 S1 Guangdong Biolight Meditech Co.,Ltd
Page 39 of WT3 Electronic Thermometer Test Report HD 271 S1 Guangdong Biolight Meditech Co.,Ltd
Page 40 of WT3 Electronic Thermometer Test Report HD 271 S1 Guangdong Biolight Meditech Co.,Ltd
Page 41 of WT3 Electronic Thermometer Test Report HD 271 S1 Guangdong Biolight Meditech Co.,Ltd
Page 42 of WT3 Electronic Thermometer Test Report HD 271 S1 Guangdong Biolight Meditech Co.,Ltd
Page 43 of WT3 Electronic Thermometer Test Report HD 271 S1 Guangdong Biolight Meditech Co.,Ltd
Page 44 of WT3 Electronic Thermometer Test Report HD 271 S1 Guangdong Biolight Meditech Co.,Ltd
Page 45 of WT3 Electronic Thermometer Test Report HD 271 S1 Guangdong Biolight Meditech Co.,Ltd
Page 46 of WT3 Electronic Thermometer Test Report HD 271 S1 Guangdong Biolight Meditech Co.,Ltd
Page 47 of WT3 Electronic Thermometer Test Report HD 271 S1 Guangdong Biolight Meditech Co.,Ltd
Page 48 of WT3 Electronic Thermometer Test Report HD 271 S1 Guangdong Biolight Meditech Co.,Ltd
Page 49 of WT3 Electronic Thermometer Test Report HD 271 S1 Guangdong Biolight Meditech Co.,Ltd
Page 50 of WT3 Electronic Thermometer Test Report HD 271 S1 Guangdong Biolight Meditech Co.,Ltd

SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
No. 1 Workshop, M-10, Middle section, Science & Technology Park,
Shenzhen, Guangdong, China 518057
Telephone:
Fax:
Email:
Report No.: SZEM170400359101
Page:
1 of 50
+86 (0) 755 2601 2053
+86 (0) 755 2671 0594
[email protected]
TEST REPORT
Application No.:
Applicant:
Address of Applicant:
Manufacturer:
Address of Manufacturer:
Factory:
Address of Factory:
SZEM1704003591CR (GZME1704000260ME)
Guangdong Biolight Meditech Co.,Ltd.
No.2 Innovation First Road, Technical Innovation Coast, Hi-tech Zone, Zhuhai,
P.R. China
Guangdong Biolight Meditech Co.,Ltd.
No.2 Innovation First Road, Technical Innovation Coast, Hi-tech Zone, Zhuhai,
P.R. China
Guangdong Biolight Meditech Co.,Ltd.
No.2 Innovation First Road, Technical Innovation Coast, Hi-tech Zone, Zhuhai,
P.R. China
Equipment Under Test (EUT):
EUT Name:
Electronic Thermometer
Model No.:
WT3
Trade mark:
BLT
FCC ID:
2AC6R-WT3
47 CFR Part 15, Subpart C 15.247
Standards:
Date of Receipt:
2017-04-21
Date of Test:
2017-04-25 to 2017-05-15
Date of Issue:
2017-05-16
Pass*
Test Result :
* In the configuration tested, the EUT complied with the standards specified above.
Jack Zhang
EMC Laboratory Manager
The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report.
If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new
system complies with all relevant standards. Any mention of SGS International Electrical Approvals or testing done by SGS
International Electrical Approvals in connection with, distribution or use of the product described in this report must be approved by SGS
International Electrical Approvals in writing.
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights
and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification
of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the
sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170400359101
Page:
2 of 50
Revision Record
Version
Chapter
01
Date
Modifier
2017-05-16
Remark
Original
Authorized for issue by:
2017-05-16
Tested By
Edison Li /Project Engineer
Date
2017-05-16
Checked By
Eric Fu /Reviewer
Date
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights
and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification
of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the
sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170400359101
Page:
3 of 50
Test Summary
Radio Spectrum Technical Requirement
Item
Standard
Method
Requirement
Result
Antenna
Requirement
47 CFR Part 15,
Subpart C 15.247
N/A
47 CFR Part 15,
Subpart C 15.203
& 15.247(c)
Pass
Requirement
Result
Radio Spectrum Matter Part
Item
Standard
Method
Minimum 6dB
Bandwidth
47 CFR Part 15,
Subpart C 15.247
ANSI C63.10 (2013)
Section 11.8.1
Conducted Peak
Output Power
47 CFR Part 15,
Subpart C 15.247
ANSI C63.10 (2013)
Section 11.9.1.1
Power Spectrum
Density
47 CFR Part 15,
Subpart C 15.247
ANSI C63.10 (2013)
Section 11.10.2
Conducted Band
Edges Measurement
47 CFR Part 15,
Subpart C 15.247
ANSI C63.10 (2013)
Section 11.13.3.2
Conducted Spurious
Emissions
47 CFR Part 15,
Subpart C 15.247
ANSI C63.10 (2013)
Section 11.11
Radiated Emissions
which fall in the
restricted bands
47 CFR Part 15,
Subpart C 15.247
ANSI C63.10 (2013)
Section 6.10.5
Radiated Spurious
Emissions
47 CFR Part 15,
Subpart C 15.247
ANSI C63.10 (2013)
Section 6.4,6.5,6.6
47 CFR Part 15,
Subpart C
15.247a(2)
47 CFR Part 15,
Subpart C
15.247(b)(3)
47 CFR Part 15,
Subpart C
15.247(e)
47 CFR Part 15,
Subpart C
15.247(d)
47 CFR Part 15,
Subpart C
15.247(d)
47 CFR Part 15,
Subpart C 15.205
& 15.209
47 CFR Part 15,
Subpart C 15.205
& 15.209
Pass
Pass
Pass
Pass
Pass
Pass
Pass
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights
and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification
of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the
sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170400359101
Page:
4 of 50
Contents
Page
COVER PAGE ............................................................................................................................................1
TEST SUMMARY .................................................................................................................................................... 3
CONTENTS .............................................................................................................................................................. 4
GENERAL INFORMATION .................................................................................................................................... 6
4.1
4.2
4.3
4.4
4.5
4.6
4.7
DETAILS OF E.U.T. ................................................................................................................................................. 6
DESCRIPTION OF SUPPORT UNITS ............................................................................................................................ 6
MEASUREMENT UNCERTAINTY............................................................................................................................... 7
TEST LOCATION ...................................................................................................................................................... 8
TEST FACILITY ........................................................................................................................................................ 8
DEVIATION FROM STANDARDS................................................................................................................................ 8
ABNORMALITIES FROM STANDARD CONDITIONS .................................................................................................... 8
EQUIPMENT LIST ................................................................................................................................................... 9
RADIO SPECTRUM TECHNICAL REQUIREMENT ........................................................................................ 11
6.1 ANTENNA REQUIREMENT ..................................................................................................................................... 11
6.1.1 Test Requirement: ................................................................................................................................... 11
6.1.2 Conclusion ................................................................................................................................................ 11
RADIO SPECTRUM MATTER TEST RESULTS ............................................................................................. 12
7.1 MINIMUM 6DB BANDWIDTH ................................................................................................................................. 12
7.1.1 E.U.T. Operation ...................................................................................................................................... 12
7.1.2 Test Setup Diagram................................................................................................................................. 12
7.1.3 Measurement Procedure and Data ...................................................................................................... 12
7.2 CONDUCTED PEAK OUTPUT POWER...................................................................................................................... 13
7.2.1 E.U.T. Operation ...................................................................................................................................... 13
7.2.2 Test Setup Diagram................................................................................................................................. 13
7.2.3 Measurement Procedure and Data ...................................................................................................... 13
7.3 POWER SPECTRUM DENSITY ................................................................................................................................. 14
7.3.1 E.U.T. Operation ...................................................................................................................................... 14
7.3.2 Test Setup Diagram................................................................................................................................. 14
7.3.3 Measurement Procedure and Data ...................................................................................................... 14
7.4 CONDUCTED SPURIOUS EMISSIONS ....................................................................................................................... 15
7.4.1 E.U.T. Operation ...................................................................................................................................... 15
7.4.2 Test Setup Diagram................................................................................................................................. 15
7.4.3 Measurement Procedure and Data ...................................................................................................... 15
7.5 RADIATED EMISSIONS WHICH FALL IN THE RESTRICTED BANDS............................................................................. 16
7.5.1 E.U.T. Operation ...................................................................................................................................... 16
7.5.2 Test Setup Diagram................................................................................................................................. 16
7.5.3 Measurement Procedure and Data ...................................................................................................... 17
7.6 RADIATED SPURIOUS EMISSIONS .......................................................................................................................... 22
7.6.1 E.U.T. Operation ...................................................................................................................................... 23
7.6.2 Test Setup Diagram................................................................................................................................. 23
7.6.3 Measurement Procedure and Data ...................................................................................................... 24
PHOTOGRAPHS ................................................................................................................................................... 33
8.1
8.2
RADIATED SPURIOUS EMISSIONS TEST SETUP....................................................................................................... 33
EUT CONSTRUCTIONAL DETAILS ......................................................................................................................... 35
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights
and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification
of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the
sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170400359101
Page:
5 of 50
APPENDIX .............................................................................................................................................................. 36
9.1
APPENDIX 15.247........................................................................................................................................... 36-50
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights
and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification
of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the
sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170400359101
Page:
6 of 50
General Information
4.1 Details of E.U.T.
Power supply:
Bluetooth Version:
Modulation Type:
Number of Channels:
Frequency Range:
Sample Type:
Antenna Type:
Antenna Gain:
3V DC
Bluetooth V4.1 BLE
GFSK
40
2402MHz to 2480MHz
Portable production
Integral
3.19dBi
4.2 Description of Support Units
The EUT has been tested as an independent unit.
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights
and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification
of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the
sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170400359101
Page:
7 of 50
4.3 Measurement Uncertainty
No.
Item
Measurement Uncertainty
Radio Frequency
7.25 x 10-8
Duty cycle
0.37%
Occupied Bandwidth
3%
RF conducted power
0.75dB
RF power density
2.84dB
Conducted Spurious emissions
0.75dB
RF Radiated power
4.5dB (below 1GHz)
4.8dB (above 1GHz)
4.5dB (30MHz-1GHz)
Radiated Spurious emission test
4.8dB (1GHz-18GHz)
Temperature test
1°C
10
Humidity test
3%
11
Supply voltages
1.5%
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights
and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification
of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the
sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170400359101
Page:
8 of 50
4.4 Test Location
All tests were performed at:
SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen Branch
No. 1 Workshop, M-10, Middle Section, Science & Technology Park, Shenzhen, Guangdong, China.
518057.
Tel: +86 755 2601 2053
Fax: +86 755 2671 0594
No tests were sub-contracted.
4.5 Test Facility
The test facility is recognized, certified, or accredited by the following organizations:
• CNAS (No. CNAS L2929)
CNAS has accredited SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch EMC
Lab to ISO/IEC 17025:2005 General Requirements for the Competence of Testing and Calibration
Laboratories (CNAS-CL01 Accreditation Criteria for the Competence of Testing and Calibration
Laboratories) for the competence in the field of testing.
• A2LA (Certificate No. 3816.01)
SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory is accredited by the
American Association for Laboratory Accreditation(A2LA). Certificate No. 3816.01.
• VCCI
The 10m Semi-anechoic chamber and Shielded Room of SGS-CSTC Standards Technical Services
Co., Ltd. have been registered in accordance with the Regulations for Voluntary Control Measures with
Registration No.: G-823, R-4188, T-1153 and C-2383 respectively.
• FCC – Registration No.: 556682
SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory has been registered
and fully described in a report filed with the (FCC) Federal Communications Commission. The
acceptance letter from the FCC is maintained in our files. Registration No.: 556682.
• Industry Canada (IC)
Two 3m Semi-anechoic chambers and the 10m Semi-anechoic chamber of SGS-CSTC Standards
Technical Services Co., Ltd. Shenzhen Branch EMC Lab have been registered by Certification and
Engineering Bureau of Industry Canada for radio equipment testing with Registration No.: 4620C-1,
4620C-2, 4620C-3.
4.6 Deviation from Standards
None
4.7 Abnormalities from Standard Conditions
None
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights
and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification
of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the
sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170400359101
Page:
9 of 50
Equipment List
RF Conducted Test
Equipment
Manufacturer
Model No
Inventory No
Cal Date
Cal Due Date
DC Power Supply
ZhaoXin
RXN-305D
SEM011-02
2016-10-09
2017-10-09
Spectrum Analyzer
Rohde & Schwarz
FSP
SEM004-06
2016-10-09
2017-10-09
Power Meter
Rohde & Schwarz
NRVS
SEM014-02
2016-10-09
2017-10-09
Test Equipment
Manufacturer
Model No.
Inventory No.
3m Semi-Anechoic
Chamber
ETS-LINDGREN
N/A
SEM001-01
2017-04-14
2018-04-14
EMI Test Receiver
Agilent
Technologies
N9038A
SEM004-05
2016-10-09
2017-10-09
ETS-LINDGREN
3142C
SEM003-01
2014-11-01
2017-11-01
ETS-LINDGREN
3117
SEM003-11
2015-10-17
2018-10-17
ETS-LINDGREN
3160
SEM003-12
2014-11-24
2017-11-24
Agilent
Technologies
8447D
SEM005-01
2017-04-14
2018-04-14
Amindeon
Zhao Xin
Asi 3314
RXN-305D
SEM023-01
SEM011-02
N/A
2016-10-09
N/A
2017-10-09
Beijing Daze
ZN30401
SEM003-09
2017-04-14
2018-04-14
RE in Chamber
BiConiLog Antenna
(26-3000MHz)
Double-ridged horn
(1-18GHz)
Horn Antenna
(18-26GHz)
Pre-amplifier
(0.1-1300MHz)
Band filter
DC Power Supply
Loop Antenna
Cal. Date
Cal. Due date
(yyyy-mm-dd) (yyyy-mm-dd)
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights
and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification
of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the
sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170400359101
Page:
10 of 50
RE in Chamber
Manufacturer
Model No.
Inventory No.
Cal. Date
(yyyy-mm-dd)
Cal. Due date
(yyyy-mm-dd)
AUDIX
N/A
SEM001-02
2017-04-14
2018-04-14
Agilent
Technologies Inc
N9010A
SEM004-09
2016-07-19
2017-07-19
ETS-Lindgren
3142C
SEM003-02
2014-11-15
2017-11-15
HP
8447D
SEM005-02
2016-10-09
2017-10-09
Rohde & Schwarz
HF907
SEM003-07
2015-06-14
2018-06-14
ETS-Lindgren
3160
SEM003-12
2014-11-24
2017-11-24
A.H.Systems, inc.
SAS-573
SEM003-13
2015-02-12
2018-02-12
2016-10-09
2017-10-09
N/A
N/A
Test Equipment
3m Semi-Anechoic
Chamber
EXA Spectrum
Analyzer
BiConiLog Antenna
(26-3000MHz)
Amplifier
(0.1-1300MHz)
Horn Antenna
(1-18GHz)
Horn Antenna
(18-26GHz)
Horn
Antenna(26GHz40GHz)
Low Noise Amplifier
Band filter
Black Diamond
Series
Amindeon
BDLNASEM005-05
0118-352810
Asi 3314
SEM023-01
General used equipment
Equipment
Humidity/ Temperature
Indicator
Humidity/ Temperature
Indicator
Manufacturer
Shanghai
Meteorological
Industry Factory
Shanghai
Meteorological
Industry Factory
Model No
Inventory No
Cal Date
Cal Due Date
ZJ1-2B
SEM002-03
2016-10-12
2017-10-12
ZJ1-2B
SEM002-04
2016-10-12
2017-10-12
Humidity/ Temperature
Indicator
Mingle
N/A
SEM002-08
2016-10-12
2017-10-12
Barometer
Changchun
Meteorological
Industry Factory
DYM3
SEM002-01
2017-04-14
2018-04-14
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights
and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification
of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the
sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170400359101
Page:
11 of 50
Radio Spectrum Technical Requirement
6.1 Antenna Requirement
6.1.1 Test Requirement:
47 CFR Part 15, Subpart C 15.203 & 15.247(c)
6.1.2 Conclusion
Standard Requirment:
An intentional radiator shall be designed to ensure that no antenna other than that furnished by the
responsible party shall be used with the device. The use of a permanently attached antenna or of an
antenna that uses a unique coupling to the intentional radiator, the manufacturer may design the unit so
that a broken antenna can be replaced by the user, but the use of a standard antenna jack or electrical
connector is prohibited.
15.247(b) (4) requirement:
The conducted output power limit specified in paragraph (b) of this section is based on the use of
antennas with directional gains that do not exceed 6 dBi. Except as shown in paragraph (c) of this
section, if transmitting antennas of directional gain greater than 6 dBi are used, the conducted output
power from the intentional radiator shall be reduced below the stated values in paragraphs (b)(1), (b)(2),
and (b)(3) of this section, as appropriate, by the amount in dB that the directional gain of the antenna
exceeds 6 dBi.
EUT Antenna:
The antenna is integrated on the main PCB and no consideration of replacement. The best case gain of
the antenna is 3.19dBi.
Antenna
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights
and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification
of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the
sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170400359101
Page:
12 of 50
Radio Spectrum Matter Test Results
7.1 Minimum 6dB Bandwidth
Test Requirement
Test Method:
Limit:
47 CFR Part 15, Subpart C 15.247a(2)
ANSI C63.10 (2013) Section 11.8.1
≥500 kHz
7.1.1 E.U.T. Operation
Operating Environment:
Temperature:
23 C
Atmospheric Pressure:
Humidity: 56 % RH
Test mode
a:TX_Keep the EUT in transmitting mode with GFSK modulation.
7.1.2 Test Setup Diagram
1015 mbar
7.1.3 Measurement Procedure and Data
The detailed test data see: Appendix 15.247
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights
and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification
of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the
sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170400359101
Page:
13 of 50
7.2 Conducted Peak Output Power
Test Requirement
Test Method:
Limit:
47 CFR Part 15, Subpart C 15.247(b)(3)
ANSI C63.10 (2013) Section 11.9.1.1
Frequency range(MHz)
Output power of the intentional radiator(watt)
1w for ≥50 hopping channels
902-928
0.25w for <50 hopping channels
1w for digital modulation
1w for ≥75 non-overlapping hopping channels
2400-2483.5
0.125w for all other frequency hopping systems
1w for digital modulation
5725-5850
1w for frequency hopping systems and digital modulation
7.2.1 E.U.T. Operation
Operating Environment:
Temperature:
23 C
Atmospheric Pressure:
Humidity: 56 % RH
Test mode
a:TX_Keep the EUT in transmitting mode with GFSK modulation.
7.2.2 Test Setup Diagram
1015 mbar
7.2.3 Measurement Procedure and Data
The detailed test data see: Appendix 15.247
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights
and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification
of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the
sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170400359101
Page:
14 of 50
7.3 Power Spectrum Density
Test Requirement
Test Method:
Limit:
47 CFR Part 15, Subpart C 15.247(e)
ANSI C63.10 (2013) Section 11.10.2
≤8dBm in any 3 kHz band during any time interval of continuous
transmission
7.3.1 E.U.T. Operation
Operating Environment:
Temperature:
23 C
Atmospheric Pressure:
Humidity: 56 % RH
Test mode
a:TX_Keep the EUT in transmitting mode with GFSK modulation.
7.3.2 Test Setup Diagram
1015 mbar
7.3.3 Measurement Procedure and Data
The detailed test data see: Appendix 15.247
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights
and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification
of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the
sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170400359101
Page:
15 of 50
7.4 Conducted Spurious Emissions
Test Requirement
Test Method:
Limit:
47 CFR Part 15, Subpart C 15.247(d)
ANSI C63.10 (2013) Section 11.11
In any 100 kHz bandwidth outside the frequency band in which the spread
spectrum intentional radiator is operating, the radio frequency power that is
produced by the intentional radiator shall be at least 20 dB below that in the
100 kHz bandwidth within the band that contains the highest level of the
desired power, based on either an RF conducted or a radiated measurement.
7.4.1 E.U.T. Operation
Operating Environment:
Temperature:
23 C
Atmospheric Pressure:
Humidity: 56 % RH
Test mode
a:TX_Keep the EUT in transmitting mode with GFSK modulation.
7.4.2 Test Setup Diagram
1015 mbar
7.4.3 Measurement Procedure and Data
The detailed test data see: Appendix 15.247
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights
and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification
of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the
sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170400359101
Page:
16 of 50
7.5 Radiated Emissions which fall in the restricted bands
Test Requirement
Test Method:
Measurement Distance:
47 CFR Part 15, Subpart C 15.205 & 15.209
ANSI C63.10 (2013) Section 6.10.5
3m
Frequency
Limit (dBuV/m @3m)
Remark
30MHz-88MHz
40.0
Quasi-peak Value
88MHz-216MHz
43.5
Quasi-peak Value
216MHz-960MHz
46.0
Quasi-peak Value
960MHz-1GHz
54.0
Quasi-peak Value
54.0
Average Value
74.0
Peak Value
Above 1GHz
7.5.1 E.U.T. Operation
Operating Environment:
Temperature:
23 C
Atmospheric Pressure:
Humidity: 54 % RH
Test mode
a:TX_Keep the EUT in transmitting mode with GFSK modulation.
7.5.2 Test Setup Diagram
1015 mbar
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights
and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification
of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the
sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170400359101
Page:
17 of 50
7.5.3 Measurement Procedure and Data
a. For below 1GHz, the EUT was placed on the top of a rotating table 0.8 meters above the ground at a 3
or 10 meter semi-anechoic chamber. The table was rotated 360 degrees to determine the position of the
highest radiation.
b. For above 1GHz, the EUT was placed on the top of a rotating table 1.5 meters above the ground at a 3
meter fully-anechoic chamber. The table was rotated 360 degrees to determine the position of the highest
radiation.
c. The EUT was set 3 or 10 meters away from the interference-receiving antenna, which was mounted on
the top of a variable-height antenna tower.
d. The antenna height is varied from one meter to four meters above the ground to determine the
maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to
make the measurement.
e. For each suspected emission, the EUT was arranged to its worst case and then the antenna was
tuned to heights from 1 meter to 4 meters (for the test frequency of below 30MHz, the antenna was tuned
to heights 1 meter) and the rotatable table was turned from 0 degrees to 360 degrees to find the
maximum reading.
f. The test-receiver system was set to Peak Detect Function and Specified Bandwidth with Maximum
Hold Mode.
g. If the emission level of the EUT in peak mode was 10dB lower than the limit specified, then testing
could be stopped and the peak values of the EUT would be reported. Otherwise the emissions that did
not have 10dB margin would be re-tested one by one using peak, quasi-peak or average method as
specified and then reported in a data sheet.
h. Test the EUT in the lowest channel,the middle channel,the Highest channel.
i. The radiation measurements are performed in X, Y, Z axis positioning for Transmitting mode, and
found the X axis positioning which it is the worst case.
j. Repeat above procedures until all frequencies measured was complete.
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights
and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification
of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the
sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170400359101
Page:
18 of 50
Mode:a; Polarization:Horizontal; Modulation Type:GFSK; Channel:Low
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights
and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification
of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the
sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170400359101
Page:
19 of 50
Mode:a; Polarization:Vertical; Modulation Type:GFSK; Channel:Low
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights
and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification
of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the
sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170400359101
Page:
20 of 50
Mode:a; Polarization:Horizontal; Modulation Type:GFSK; Channel:High
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights
and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification
of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the
sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170400359101
Page:
21 of 50
Mode:a; Polarization:Vertical; Modulation Type:GFSK; Channel:High
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights
and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification
of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the
sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170400359101
Page:
22 of 50
7.6 Radiated Spurious Emissions
Test Requirement
Test Method:
Measurement Distance:
Limit:
47 CFR Part 15, Subpart C 15.205 & 15.209
ANSI C63.10 (2013) Section 6.4,6.5,6.6
3m
Frequency(MHz)
Field strength(microvolts/meter)
Measurement distance(meters)
0.009-0.490
2400/F(kHz)
300
0.490-1.705
24000/F(kHz)
30
1.705-30.0
30
30
30-88
100
88-216
150
216-960
200
Above 960
500
Remark: The emission limits shown in the above table are based on measurements employing a CISPR quasipeak detector except for the frequency bands 9-90kHz, 110-490kHz and above 1000 MHz. Radiated emission
limits in these three bands are based on measurements employing an average detector, the peak field strength
of any emission shall not exceed the maximum permitted average limits specified above by more than 20 dB
under any condition of modulation.
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights
and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification
of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the
sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170400359101
Page:
23 of 50
7.6.1 E.U.T. Operation
Operating Environment:
Temperature:
23 C
Atmospheric Pressure:
Humidity: 54 % RH
Test mode
a:TX_Keep the EUT in transmitting mode with GFSK modulation.
7.6.2 Test Setup Diagram
1015 mbar
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights
and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification
of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the
sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170400359101
Page:
24 of 50
7.6.3 Measurement Procedure and Data
a. For below 1GHz, the EUT was placed on the top of a rotating table 0.8 meters above the ground at a 3
or 10 meter semi-anechoic chamber. The table was rotated 360 degrees to determine the position of the
highest radiation.
b. For above 1GHz, the EUT was placed on the top of a rotating table 1.5 meters above the ground at a 3
meter fully-anechoic chamber. The table was rotated 360 degrees to determine the position of the highest
radiation.
c. The EUT was set 3 or 10 meters away from the interference-receiving antenna, which was mounted on
the top of a variable-height antenna tower.
d. The antenna height is varied from one meter to four meters above the ground to determine the
maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to
make the measurement.
e. For each suspected emission, the EUT was arranged to its worst case and then the antenna was
tuned to heights from 1 meter to 4 meters (for the test frequency of below 30MHz, the antenna was tuned
to heights 1 meter) and the rotatable table was turned from 0 degrees to 360 degrees to find the
maximum reading.
f. The test-receiver system was set to Peak Detect Function and Specified Bandwidth with Maximum
Hold Mode.
g. If the emission level of the EUT in peak mode was 10dB lower than the limit specified, then testing
could be stopped and the peak values of the EUT would be reported. Otherwise the emissions that did
not have 10dB margin would be re-tested one by one using peak, quasi-peak or average method as
specified and then reported in a data sheet.
h. Test the EUT in the lowest channel,the middle channel,the Highest channel.
i. The radiation measurements are performed in X, Y, Z axis positioning for Transmitting mode, and
found the X axis positioning which it is the worst case.
j. Repeat above procedures until all frequencies measured was complete.
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights
and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification
of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the
sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170400359101
Page:
25 of 50
Mode:a; Polarization:Horizontal; Modulation Type:GFSK;
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights
and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification
of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the
sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170400359101
Page:
26 of 50
Mode:a; Polarization:Vertical; Modulation Type:GFSK;
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights
and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification
of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the
sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170400359101
Page:
27 of 50
Mode:a; Polarization:Horizontal; Modulation Type:GFSK; Channel:Low
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights
and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification
of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the
sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170400359101
Page:
28 of 50
Mode:a; Polarization:Vertical; Modulation Type:GFSK; Channel:Low
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights
and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification
of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the
sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170400359101
Page:
29 of 50
Mode:a; Polarization:Horizontal; Modulation Type:GFSK; Channel:middle
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights
and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification
of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the
sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170400359101
Page:
30 of 50
Mode:a; Polarization:Vertical; Modulation Type:GFSK; Channel:middle
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights
and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification
of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the
sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170400359101
Page:
31 of 50
Mode:a; Polarization:Horizontal; Modulation Type:GFSK; Channel:High
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights
and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification
of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the
sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170400359101
Page:
32 of 50
Mode:a; Polarization:Vertical; Modulation Type:GFSK; Channel:High
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights
and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification
of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the
sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170400359101
Page:
33 of 50
Photographs
8.1 Radiated Spurious Emissions Test Setup
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights
and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification
of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the
sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170400359101
Page:
34 of 50
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights
and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification
of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the
sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170400359101
Page:
35 of 50
8.2 EUT Constructional Details
Refer to Appendix A - Photographs of EUT Constructional Details for SZEM1704003591CR.
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights
and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification
of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the
sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170400359101
Page:
36 of 50
Appendix
9.1 Appendix 15.247
1.6dB Bandwidth
Test Mode
Test Channel
EBW[MHz]
Limit
Verdict
BLE
2402
0.696
>=0.5
PASS
BLE
2440
0.690
>=0.5
PASS
BLE
2480
0.699
>=0.5
PASS
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights
and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification
of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the
sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170400359101
Page:
37 of 50
TEST
PLOT
6dB Bandwidth_BLE_2402
Ref
5 dBm
Offset
* Att
5 dB
* RBW
100 kHz
* VBW
300 kHz
SWT
5 ms
Marker 3 [T1 ]
-23.94 dBm
2.402339000 GHz
Marker 1 [T1 ]
0.9 dB
-17.66 dBm
2.401994000 GHz
Marker 2 [T1 ]
1 PK
-10
-23.78 dBm
VIEW
-20
2.401643000 GHz
LVL
D1 -23.66 dBm
-30
-40
-50
3DB
-60
-70
-80
-90
Center
2.402 GHz
Date: 10.MAY.2017
300 kHz/
Span
3 MHz
14:33:08
6dB Bandwidth_BLE_2440
Ref
5 dBm
Offset
* Att
5 dB
* RBW
100 kHz
* VBW
300 kHz
SWT
5 ms
Marker 3 [T1 ]
-25.05 dBm
2.440327000 GHz
Marker 1 [T1 ]
0.9 dB
-19.00 dBm
2.439988000 GHz
Marker 2 [T1 ]
1 PK
-10
-25.01 dBm
VIEW
2.439637000 GHz
-20
LVL
D1 -25 dBm
-30
-40
-50
3DB
-60
-70
-80
-90
Center
2.44 GHz
Date: 10.MAY.2017
300 kHz/
Span
3 MHz
14:39:31
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights
and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification
of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the
sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170400359101
Page:
38 of 50
6dB Bandwidth_BLE_2480
Ref
5 dBm
Offset
* Att
5 dB
* RBW
100 kHz
* VBW
300 kHz
SWT
5 ms
Marker 3 [T1 ]
-24.15 dBm
2.480327000 GHz
Marker 1 [T1 ]
0.9 dB
-18.05 dBm
2.479991000 GHz
Marker 2 [T1 ]
1 PK
-10
-24.10 dBm
VIEW
-20
2.479628000 GHz
LVL
D1 -24.05 dBm
-30
-40
-50
3DB
-60
-70
-80
-90
Center
2.48 GHz
Date: 10.MAY.2017
300 kHz/
Span
3 MHz
14:44:13
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights
and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification
of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the
sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170400359101
Page:
39 of 50
2. Maximum peak conducted output power
Test Mode
Test Channel
Power[dBm]
Limit[dBm]
Verdict
BLE
2402
-17.47
<30
PASS
BLE
2440
-18.78
<30
PASS
BLE
2480
-17.84
<30
PASS
TEST
PLOT
Maximum peak conducted output power_BLE_2402
Ref
5 dBm
Offset
* Att
5 dB
* RBW
3 MHz
* VBW
10 MHz
-17.47 dBm
* SWT
100 ms
2.401975000 GHz
Marker 1 [T1 ]
0.9 dB
SGL
1 PK
-10
MAXH
LVL
-20
-30
-40
-50
3DB
-60
-70
-80
-90
Center
2.402 GHz
Date: 10.MAY.2017
2.5 MHz/
Span
25 MHz
14:33:22
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights
and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification
of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the
sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170400359101
Page:
40 of 50
Maximum peak conducted output power_BLE_2440
Ref
5 dBm
Offset
* Att
5 dB
* RBW
3 MHz
* VBW
10 MHz
-18.78 dBm
* SWT
100 ms
2.439875000 GHz
Marker 1 [T1 ]
0.9 dB
SGL
1 PK
-10
MAXH
LVL
-20
-30
-40
-50
3DB
-60
-70
-80
-90
Center
2.44 GHz
Date: 10.MAY.2017
2.5 MHz/
Span
25 MHz
14:39:46
Maximum peak conducted output power_BLE_2480
Ref
5 dBm
Offset
* Att
5 dB
* RBW
3 MHz
* VBW
10 MHz
-17.84 dBm
* SWT
100 ms
2.479875000 GHz
Marker 1 [T1 ]
0.9 dB
SGL
1 PK
-10
MAXH
LVL
-20
-30
-40
-50
3DB
-60
-70
-80
-90
Center
2.48 GHz
Date: 10.MAY.2017
2.5 MHz/
Span
25 MHz
14:44:27
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights
and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification
of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the
sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170400359101
Page:
41 of 50
3. Maximum Peak power spectral density
Test Mode
Test Channel
PSD[dBm/3kHz]
Limit[dBm/3kHz]
Verdict
BLE
2402
-33.26
<8.00
PASS
BLE
2440
-34.42
<8.00
PASS
BLE
2480
-33.62
<8.00
PASS
TEST
PLOT
Maximum Peak power spectral density_BLE_2402
Ref
5 dBm
Offset
* Att
5 dB
* RBW
3 kHz
* VBW
10 kHz
-33.26 dBm
SWT
170 ms
2.401857500 GHz
Marker 1 [T1 ]
0.9 dB
SGL
1 PK
-10
MAXH
LVL
-20
-30
-40
-50
3DB
-60
-70
-80
-90
Center
2.402 GHz
Date: 10.MAY.2017
150 kHz/
Span
1.5 MHz
14:33:57
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights
and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification
of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the
sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170400359101
Page:
42 of 50
Maximum Peak power spectral density_BLE_2440
Ref
5 dBm
Offset
* Att
5 dB
* RBW
3 kHz
* VBW
10 kHz
-34.42 dBm
SWT
170 ms
2.439856000 GHz
Marker 1 [T1 ]
0.9 dB
SGL
1 PK
-10
MAXH
LVL
-20
-30
-40
-50
3DB
-60
-70
-80
-90
Center
2.44 GHz
Date: 10.MAY.2017
150 kHz/
Span
1.5 MHz
14:40:20
Maximum Peak power spectral density_BLE_2480
Ref
5 dBm
Offset
* Att
5 dB
* RBW
3 kHz
* VBW
10 kHz
-33.62 dBm
SWT
170 ms
2.479854500 GHz
Marker 1 [T1 ]
0.9 dB
SGL
1 PK
-10
MAXH
LVL
-20
-30
-40
-50
3DB
-60
-70
-80
-90
Center
2.48 GHz
Date: 10.MAY.2017
150 kHz/
Span
1.5 MHz
14:45:02
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights
and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification
of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the
sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170400359101
Page:
43 of 50
4. Band-edge for RF Conducted Emissions
Test
Test
Carrier
Max. Spurious Level
Limit
Mode
Channel
Power[dBm]
[dBm]
[dBm]
BLE
2402
-17.720
-70.944
<-37.72
PASS
BLE
2480
-18.100
-70.738
<-38.1
PASS
Verdict
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights
and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification
of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the
sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170400359101
Page:
44 of 50
TEST
PLOT
Band-edge for RF Conducted Emissions_BLE_2402_Hopping Off
Ref
5 dBm
Offset
* Att
5 dB
* RBW
100 kHz
* VBW
300 kHz
SWT
Marker 4 [T1 ]
-70.94 dBm
10 ms
2.328189000 GHz
Marker 1 [T1 ]
0.9 dB
-17.72 dBm
2.401979000 GHz
SGL
Marker 2 [T1 ]
1 PK
-10
-68.65 dBm
MAXH
2 . 4 0 0 0 0 0 0 0 0 G H1z
LVL
Marker 3 [T1 ]
-20
-75.19 dBm
2.390000000 GHz
-30
D1 -37.72 dBm
-40
-50
3DB
-60
-70
-80
-90
Start
2.31 GHz
Date: 10.MAY.2017
9.4 MHz/
Stop
2.404 GHz
14:34:07
Band-edge for RF Conducted Emissions_BLE_2480_Hopping Off
Ref
5 dBm
Offset
* Att
5 dB
* RBW
100 kHz
* VBW
300 kHz
SWT
Marker 4 [T1 ]
-70.74 dBm
10 ms
2.493895000 GHz
Marker 1 [T1 ]
0.9 dB
-18.10 dBm
2.479991000 GHz
SGL
Marker 2 [T1 ]
1 PK
-10
MAXH
-73.98 dBm
2.483500000 GHz
LVL
Marker 3 [T1 ]
-20
-72.18 dBm
2.500000000 GHz
-30
D1 -38.1 dBm
-40
-50
3DB
-60
-70
-80
-90
Start
2.478 GHz
Date: 10.MAY.2017
2.2 MHz/
Stop
2.5 GHz
14:45:16
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights
and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification
of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the
sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170400359101
Page:
45 of 50
5. RF Conducted Spurious Emissions
Max.
Test
StartFre
StopFre
RBW
VBW
Channel
[MHz]
[MHz]
[kHz]
[kHz]
BLE
2402
30
10000
1000
3000
-17.5
-62.340
<-37.5
PASS
BLE
2402
10000
25000
1000
3000
-17.5
-69.780
<-37.5
PASS
BLE
2440
30
10000
1000
3000
-18.88
-62.860
<-38.88
PASS
BLE
2440
10000
25000
1000
3000
-18.88
-69.480
<-38.88
PASS
BLE
2480
30
10000
1000
3000
-17.96
-65.210
<-37.96
PASS
BLE
2480
10000
25000
1000
3000
-17.96
-69.510
<-37.96
PASS
Test Mode
Pref[dBm]
Level
[dBm]
Limit
[dBm]
Verdict
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights
and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification
of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the
sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170400359101
Page:
46 of 50
TEST
PLOT
RF Conducted Spurious Emissions_BLE_2402
Ref
5 dBm
Offset
* Att
5 dB
* RBW
100 kHz
* VBW
300 kHz
SWT
10 ms
Marker 1 [T1 ]
-17.50 dBm
2.401950000 GHz
0.9 dB
SGL
1 PK
MAXH
-10
LVL
-20
-30
D2 -37.5 dBm
-40
Pref
-50
3DB
-60
-70
-80
-90
Start
2.4 GHz
Date: 10.MAY.2017
Ref
5 dBm
Offset
10 MHz/
14:37:54
* Att
5 dB
Stop
2.5 GHz
* RBW
1 MHz
* VBW
3 MHz
-62.34 dBm
SWT
60 ms
2.557395000 GHz
Marker 2 [T1 ]
Marker 1 [T1 ]
0.9 dB
-17.30 dBm
2.402860000 GHz
SGL
1 PK
-10
MAXH
LVL
-20
-30
D2 -37.5 dBm
-40
CSE_1
-50
3DB
-60
-70
-80
-90
Start
30 MHz
Date: 10.MAY.2017
997 MHz/
Stop
10 GHz
14:38:33
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights
and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification
of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the
sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170400359101
Page:
47 of 50
Ref
5 dBm
Offset
* Att
5 dB
* RBW
1 MHz
* VBW
3 MHz
-69.78 dBm
SWT
90 ms
22.337500000 GHz
Marker 1 [T1 ]
0.9 dB
SGL
1 PK
-10
MAXH
LVL
-20
-30
D2 -37.5 dBm
-40
CSE_2
-50
3DB
-60
-70
-80
-90
Start
10 GHz
Date: 10.MAY.2017
Ref
1.5 GHz/
25 GHz
RF Conducted Spurious Emissions_BLE_2440
14:38:55
5 dBm
Offset
Stop
* Att
5 dB
* RBW
100 kHz
* VBW
300 kHz
SWT
10 ms
Marker 1 [T1 ]
-18.88 dBm
2.440000000 GHz
0.9 dB
SGL
1 PK
-10
MAXH
LVL
-20
-30
-40
D2 -38.88 dBm
Pref
-50
3DB
-60
-70
-80
-90
Start
2.4 GHz
Date: 10.MAY.2017
10 MHz/
Stop
2.5 GHz
14:40:35
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights
and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification
of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the
sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170400359101
Page:
48 of 50
Ref
5 dBm
Offset
* Att
5 dB
* RBW
1 MHz
* VBW
3 MHz
-62.86 dBm
SWT
60 ms
2.597275000 GHz
Marker 2 [T1 ]
Marker 1 [T1 ]
0.9 dB
-18.66 dBm
2.437755000 GHz
SGL
1 PK
-10
MAXH
LVL
-20
-30
D2 -38.88 dBm
-40
CSE_1
-50
3DB
-60
-70
-80
-90
Start
30 MHz
Date: 10.MAY.2017
Ref
997 MHz/
14:41:13
5 dBm
Offset
* Att
5 dB
Stop
10 GHz
* RBW
1 MHz
* VBW
3 MHz
-69.48 dBm
SWT
90 ms
23.470000000 GHz
Marker 1 [T1 ]
0.9 dB
SGL
1 PK
-10
MAXH
LVL
-20
-30
-40
D2 -38.88 dBm
-50
CSE_2
3DB
-60
-70
-80
-90
Start
10 GHz
Date: 10.MAY.2017
1.5 GHz/
Stop
25 GHz
14:41:36
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights
and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification
of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the
sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170400359101
Page:
49 of 50
RF Conducted Spurious Emissions_BLE_2480
Ref
5 dBm
Offset
* Att
5 dB
* RBW
100 kHz
* VBW
300 kHz
SWT
10 ms
Marker 1 [T1 ]
-17.96 dBm
2.480000000 GHz
0.9 dB
SGL
1 PK
-10
MAXH
LVL
-20
-30
D2 -37.96 dBm
-40
Pref
-50
3DB
-60
-70
-80
-90
Start
2.4 GHz
Date: 10.MAY.2017
Ref
10 MHz/
14:45:31
5 dBm
Offset
* Att
5 dB
Stop
2.5 GHz
* RBW
1 MHz
* VBW
3 MHz
-65.21 dBm
SWT
60 ms
2.632170000 GHz
Marker 2 [T1 ]
Marker 1 [T1 ]
0.9 dB
-17.64 dBm
2.477635000 GHz
SGL
1 PK
-10
MAXH
LVL
-20
-30
D2 -37.96 dBm
-40
CSE_1
-50
3DB
-60
-70
-80
-90
Start
30 MHz
Date: 10.MAY.2017
997 MHz/
Stop
10 GHz
14:46:09
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights
and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification
of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the
sample(s) tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM170400359101
Page:
50 of 50
Ref
5 dBm
Offset
* Att
5 dB
* RBW
1 MHz
* VBW
3 MHz
-69.51 dBm
SWT
90 ms
23.402500000 GHz
Marker 1 [T1 ]
0.9 dB
SGL
1 PK
-10
MAXH
LVL
-20
-30
D2 -37.96 dBm
-40
CSE_2
-50
3DB
-60
-70
-80
-90
Start
10 GHz
Date: 10.MAY.2017
1.5 GHz/
Stop
25 GHz
14:46:32
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights
and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification
of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the
sample(s) tested and such sample(s) are retained for 30 days only.
Download: WT3 Electronic Thermometer Test Report HD 271 S1 Guangdong Biolight Meditech Co.,Ltd
Mirror Download [FCC.gov]WT3 Electronic Thermometer Test Report HD 271 S1 Guangdong Biolight Meditech Co.,Ltd
Document ID3428690
Application IDf4+jsFCc5Gx+vhjAl/sYSQ==
Document DescriptionTest Report
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeTest Report
Display FormatAdobe Acrobat PDF - pdf
Filesize138.16kB (1726981 bits)
Date Submitted2017-06-16 00:00:00
Date Available2017-06-16 00:00:00
Creation Date2017-06-16 16:04:11
Producing SoftwareMicrosoft® Office Word 2007
Document Lastmod2017-06-16 16:04:11
Document TitleHD 271 S1
Document CreatorMicrosoft® Office Word 2007
Document Author: LAB02

Source Exif Data:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.5
Linearized                      : No
Page Count                      : 50
Language                        : zh-CN
Tagged PDF                      : Yes
Title                           : HD 271 S1
Author                          : LAB02
Creator                         : Microsoft® Office Word 2007
Create Date                     : 2017:06:16 16:04:11+08:00
Modify Date                     : 2017:06:16 16:04:11+08:00
Producer                        : Microsoft® Office Word 2007

Facebook Twitter Google+ RSS © FCCID.io 2017