FCC ID 2AC7Z-RIGEL
Wi-Fi & Bluetooth Internet of Things Module
by ESPRESSIF SYSTEMS (SHANGHAI) CO., LTD
Grantee Code: 2AC7Z Product Code: RIGEL
Latest application date: 2019-04-30
FCC ID Device Details
| FCC ID | 2AC7Z-RIGEL |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2AC7Z |
| Product Code | RIGEL |
| Applicant Business | ESPRESSIF SYSTEMS (SHANGHAI) CO., LTD 🇨🇳 |
| Related Domains |  espressif.com |
| Equipment Class | Wi-Fi & Bluetooth Internet of Things Module |
| Test Firm | Bay Area Compliance Laboratories Corp. (Kunshan) |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2019-04-30 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2019-04-30 |
| 2402-2480 MHz | Original Equipment | 2018-11-28 |
| 2402-2480 MHz | Original Equipment | 2018-11-28 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2018-11-28 | PDF 1,018.8 KB |
| Int Photos | Internal Photos | 2018-11-28 | PDF 1.2 MB |
| External Photos | External Photos | 2019-04-30 | PDF 359.3 KB |
| Ext Photos | External Photos | 2018-11-28 | PDF 848.5 KB |
| Label and Label Location | ID Label/Location Info | 2019-04-30 | PDF 540.3 KB |
| FCC ID Label | ID Label/Location Info | 2018-11-28 | PDF 1.3 MB |
| Test Setup Photos | Test Setup Photos | 2019-04-30 | PDF 1.7 MB |
| Setup Photos | Test Setup Photos | 2018-11-28 | PDF 2.1 MB |
| Test Report | Test Report | 2019-04-30 | PDF 2.3 MB |
| Test Report | Test Report | 2019-04-30 | PDF 918.7 KB |
| Test Report | Test Report | 2018-11-28 | PDF 2.6 MB |
| Test Report | Test Report | 2018-11-28 | PDF 3.7 MB |
| Authorization Letter | Cover Letter(s) | 2019-04-30 | PDF 36.3 KB |
| Permissive II Change Declaration Letter | Cover Letter(s) | 2019-04-30 | PDF 169.3 KB |
| Confidentiality Letter | Cover Letter(s) | 2018-11-28 | PDF 52.5 KB |
| Module Approval Letter | Cover Letter(s) | 2018-11-28 | PDF 127.3 KB |
| POA | Cover Letter(s) | 2018-11-28 | PDF 30.1 KB |
| RF Exposure | RF Exposure Info | 2019-04-30 | PDF 105.4 KB |
| RF Exposure | RF Exposure Info | 2018-11-28 | PDF 106.8 KB |
| Block Diagram Metadata only | Block Diagram | PDF 102.1 KB | |
| Schematics Metadata only | Schematics | PDF 336.6 KB | |
| Operation Description Metadata only | Operational Description | PDF 253.2 KB |
Application Information
| Application ID | sA/nMyY4CJFITJQvympHOw== |
|---|---|
| Final Action Date | 2019-04-30 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0023938848 |
| Model | RIGEL |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Wi-Fi & Bluetooth Internet of Things Module |
| Responsible Party | Mia Zhou, zhoumiaomiao@espressif.com , (8621)61065209 |
| Test Firm | Mr. John Chan, Bay Area Compliance Laboratories Corp. (Kunshan), qa.ks@baclcorp.com  , +86 0512 86175000 |
| TCB Email | bacl.regulatory@baclcorp.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Class II Permissive Change of adding new antennas described in this filing. Modular approval. Output power listed is conducted. This grant is valid only when the module is sold to OEM or OEM integrators. Modular approval for use as a module in mobile-only RF exposure conditions. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application. This device supports 20 MHz and 40 MHz bandwidth modes. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| sA/nMyY4CJFITJQvympHOw== | 2019-04-30 | Class II permissive change or modification of presently authorized equipment |
| AC7l4+JiNOBem7cf4VD1mA== | 2019-04-30 | Class II permissive change or modification of presently authorized equipment |
| pHo7mpx9hA2zYopYxOpxWA== | 2018-11-28 | Original Equipment |
| 488TOkF82xfmo0PNWBl5cg== | 2018-11-28 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application sA/nMyY4CJFITJQvympHOw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bay Area Compliance Laboratory Corp. 1274 Anvilwood Avenue Sunnyvale, CA 94089 |
Date of Grant: 04/30/2019 Application Dated: 04/30/2019 |
| ESPRESSIF SYSTEMS (SHANGHAI) CO., LTD |
| Suite 204, Block 2, 690 Bibo Road, |
| Zhang Jiang Hi-Tech Park, |
| Shanghai, 201203 China |
| Attention: Mia Zhou |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AC7Z-RIGEL |
| Name of Grantee: | ESPRESSIF SYSTEMS (SHANGHAI) CO., LTD |
| Equipment Class: | Digital Transmission System |
| Notes: | Wi-Fi & Bluetooth Internet of Things Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.001 | |||
| 15C | 2412.0 - 2462.0 | 0.132 |
| Class II Permissive Change of adding new antennas described in this filing. Modular approval. Output power listed is conducted. This grant is valid only when the module is sold to OEM or OEM integrators. Modular approval for use as a module in mobile-only RF exposure conditions. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application. This device supports 20 MHz and 40 MHz bandwidth modes. |
EAS Grant - Application sA/nMyY4CJFITJQvympHOw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ESPRESSIF SYSTEMS (SHANGHAI) CO., LTD Suite 204, Block 2, 690 Bibo Road, Zhang Jiang Hi-Tech Park, Shanghai, 201203 China |
Date of Grant: 04/30/2019 Application Dated: 04/30/2019 |
| Attention: Mia Zhou |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AC7Z-RIGEL |
| Name of Grantee: | ESPRESSIF SYSTEMS (SHANGHAI) CO., LTD |
| Equipment Class: | Digital Transmission System |
| Notes: | Wi-Fi & Bluetooth Internet of Things Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.001 | |||
| 15C | 2412.0 - 2462.0 | 0.132 |
| Class II Permissive Change of adding new antennas described in this filing. Modular approval. Output power listed is conducted. This grant is valid only when the module is sold to OEM or OEM integrators. Modular approval for use as a module in mobile-only RF exposure conditions. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application. This device supports 20 MHz and 40 MHz bandwidth modes. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bay Area Compliance Laboratory Corp. 1274 Anvilwood Avenue Sunnyvale, CA 94089 |
Date of Grant: 11/28/2018 Application Dated: 11/28/2018 |
| ESPRESSIF SYSTEMS (SHANGHAI) CO., LTD |
| Suite 204, Block 2, 690 Bibo Road, |
| Zhang Jiang Hi-Tech Park, |
| Shanghai, 201203 China |
| Attention: Mia Zhou |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AC7Z-RIGEL |
| Name of Grantee: | ESPRESSIF SYSTEMS (SHANGHAI) CO., LTD |
| Equipment Class: | Digital Transmission System |
| Notes: | Wi-Fi & Bluetooth Internet of Things Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.001 | |||
| 15C | 2412.0 - 2462.0 | 0.132 |
| Modular approval. Output power listed is conducted. This grant is valid only when the module is sold to OEM or OEM integrators. Modular approval for use as a module in mobile-only RF exposure conditions. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application. This device supports 20 MHz and 40 MHz bandwidth modes. |
EAS Grant - Application pHo7mpx9hA2zYopYxOpxWA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ESPRESSIF SYSTEMS (SHANGHAI) CO., LTD Suite 204, Block 2, 690 Bibo Road, Zhang Jiang Hi-Tech Park, Shanghai, 201203 China |
Date of Grant: 11/28/2018 Application Dated: 11/28/2018 |
| Attention: Mia Zhou |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AC7Z-RIGEL |
| Name of Grantee: | ESPRESSIF SYSTEMS (SHANGHAI) CO., LTD |
| Equipment Class: | Digital Transmission System |
| Notes: | Wi-Fi & Bluetooth Internet of Things Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.001 | |||
| 15C | 2412.0 - 2462.0 | 0.132 |
| Modular approval. Output power listed is conducted. This grant is valid only when the module is sold to OEM or OEM integrators. Modular approval for use as a module in mobile-only RF exposure conditions. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application. This device supports 20 MHz and 40 MHz bandwidth modes. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bay Area Compliance Laboratory Corp. 1274 Anvilwood Avenue Sunnyvale, CA 94089 |
Date of Grant: 04/30/2019 Application Dated: 04/30/2019 |
| ESPRESSIF SYSTEMS (SHANGHAI) CO., LTD |
| Suite 204, Block 2, 690 Bibo Road, |
| Zhang Jiang Hi-Tech Park, |
| Shanghai, 201203 China |
| Attention: Mia Zhou |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AC7Z-RIGEL |
| Name of Grantee: | ESPRESSIF SYSTEMS (SHANGHAI) CO., LTD |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wi-Fi & Bluetooth Internet of Things Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.002 |
| Class II Permissive Change of adding new antennas described in this filing. Modular approval. Output power listed is conducted. This grant is valid only when the module is sold to OEM or OEM integrators. Modular approval for use as a module in mobile-only RF exposure conditions. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application. |
EAS Grant - Application AC7l4+JiNOBem7cf4VD1mA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ESPRESSIF SYSTEMS (SHANGHAI) CO., LTD Suite 204, Block 2, 690 Bibo Road, Zhang Jiang Hi-Tech Park, Shanghai, 201203 China |
Date of Grant: 04/30/2019 Application Dated: 04/30/2019 |
| Attention: Mia Zhou |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AC7Z-RIGEL |
| Name of Grantee: | ESPRESSIF SYSTEMS (SHANGHAI) CO., LTD |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wi-Fi & Bluetooth Internet of Things Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.002 |
| Class II Permissive Change of adding new antennas described in this filing. Modular approval. Output power listed is conducted. This grant is valid only when the module is sold to OEM or OEM integrators. Modular approval for use as a module in mobile-only RF exposure conditions. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bay Area Compliance Laboratory Corp. 1274 Anvilwood Avenue Sunnyvale, CA 94089 |
Date of Grant: 11/28/2018 Application Dated: 11/28/2018 |
| ESPRESSIF SYSTEMS (SHANGHAI) CO., LTD |
| Suite 204, Block 2, 690 Bibo Road, |
| Zhang Jiang Hi-Tech Park, |
| Shanghai, 201203 China |
| Attention: Mia Zhou |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AC7Z-RIGEL |
| Name of Grantee: | ESPRESSIF SYSTEMS (SHANGHAI) CO., LTD |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wi-Fi & Bluetooth Internet of Things Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.002 |
| Modular approval. Output power listed is conducted. This grant is valid only when the module is sold to OEM or OEM integrators. Modular approval for use as a module in mobile-only RF exposure conditions. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application. |
EAS Grant - Application 488TOkF82xfmo0PNWBl5cg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
ESPRESSIF SYSTEMS (SHANGHAI) CO., LTD Suite 204, Block 2, 690 Bibo Road, Zhang Jiang Hi-Tech Park, Shanghai, 201203 China |
Date of Grant: 11/28/2018 Application Dated: 11/28/2018 |
| Attention: Mia Zhou |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AC7Z-RIGEL |
| Name of Grantee: | ESPRESSIF SYSTEMS (SHANGHAI) CO., LTD |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Wi-Fi & Bluetooth Internet of Things Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2402.0 - 2480.0 | 0.002 |
| Modular approval. Output power listed is conducted. This grant is valid only when the module is sold to OEM or OEM integrators. Modular approval for use as a module in mobile-only RF exposure conditions. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain maybe used with this transmitter. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. Compliance of this device in all final host configurations is the responsibility of the Grantee. End-users must be provided with specific information required to satisfy RF exposure compliance for the final host device. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application. |
| Mail To: |