FCC ID 2ACBRTFBWIFIBT
PD67-LAIRD-TWI-BLE
by Turck Inc.
Grantee Code: 2ACBR Product Code: TFBWIFIBT
Latest application date: 2020-09-08
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2020-09-08 |
| 2402-2480 MHz | Class II permissive change or modification of presently authorized equipment | 2020-09-08 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: TFB-TIWI1-01 Grant Date: 12/10/2010 | 2020-06-03 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: TFB-TIWI1-01 Grant Date: 12/10/2010 | 2020-06-03 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Internal Photos | Internal Photos | 2020-09-08 | PDF 197.8 KB |
| External Photos | External Photos | 2020-09-08 | PDF 267.4 KB |
| ID Label | ID Label/Location Info | 2020-09-08 | PDF 28.8 KB |
| ID label | ID Label/Location Info | 2020-06-03 | PDF 28.8 KB |
| Test Setup Photos | Test Setup Photos | 2020-09-08 | PDF 220.1 KB |
| SAR report | Test Report | 2020-09-08 | PDF 5.8 MB |
| Cover letter | Cover Letter(s) | 2020-09-08 | PDF 46.5 KB |
| Cover Letter | Cover Letter(s) | 2020-06-03 | PDF 660 KB |
| RF Exposure | RF Exposure Info | 2020-09-08 | PDF 1.4 MB |
Application Information
| Application ID | 8jZfu9jmsfbk7fSnBaFv/A== |
|---|---|
| Final Action Date | 2020-09-08 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0027016856 |
| Model | TFBWIFIBT |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | PD67-LAIRD-TWI-BLE |
| Responsible Party | Thomas Miller, Sr. Compliance Engineer, Tom.Miller@turck.com  , 763-509-7866 |
| Test Firm | Renee Walker, Element Materials Technology Minneapolis, renee.walker@element.com  , 503-844-4066 |
| TCB Email | rod.munro@element.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | No |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power Output listed is Conducted. Modular Approval. This device is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. C2PC for portable use in PD67 handheld computer. SAR compliance for body-worn operating configurations is limited to the belt-clips, holsters or similar accessories that have no metallic component in the assembly. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for body, and simultaneous extremity (hand) exposure conditions are 1.11 W/kg, 0.72 W/kg, respectively. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| 8jZfu9jmsfbk7fSnBaFv/A== | 2020-09-08 | Class II permissive change or modification of presently authorized equipment |
| 1mc3lgRKTv2oennOszNA/Q== | 2020-09-08 | Class II permissive change or modification of presently authorized equipment |
| EHO/7HrOFagyFBXBrCxsWA== | 2020-06-03 | Change in identification of presently authorized equipment. Original FCC ID: TFB-TIWI1-01 Grant Date: 12/10/2010 |
| 2ahnfoK7I3APi5Ee29ktVw== | 2020-06-03 | Change in identification of presently authorized equipment. Original FCC ID: TFB-TIWI1-01 Grant Date: 12/10/2010 |
Equipment Authorization
Grants
TCB Grant - Application EHO/7HrOFagyFBXBrCxsWA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Element Materials Technology Portland - Evergreen 6775 NE Evergreen Parkway, Suite 400 Hillsboro, OR 97124 |
Date of Grant: 06/03/2020 Application Dated: 06/03/2020 |
| Turck Inc. |
| 5000 Fernbrook Lane North |
| Plymouth, MN 55446 |
| Attention: Thomas Miller , Sr. Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ACBRTFBWIFIBT |
| Name of Grantee: | Turck Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | PD67-LAIRD-TIWI-BLE |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0063 |
| Power Output listed is conducted. Modular Approval. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application EHO/7HrOFagyFBXBrCxsWA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Turck Inc. 5000 Fernbrook Lane North Plymouth, MN 55446 United States |
Date of Grant: 06/03/2020 Application Dated: 06/03/2020 |
| Attention: Thomas Miller , Sr. Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ACBRTFBWIFIBT |
| Name of Grantee: | Turck Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | PD67-LAIRD-TIWI-BLE |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0063 |
| Power Output listed is conducted. Modular Approval. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Element Materials Technology Portland - Evergreen 6775 NE Evergreen Parkway, Suite 400 Hillsboro, OR 97124 |
Date of Grant: 09/08/2020 Application Dated: 09/08/2020 |
| Turck Inc. |
| 5000 Fernbrook Lane North |
| Plymouth, MN 55446 |
| Attention: Thomas Miller , Sr. Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ACBRTFBWIFIBT |
| Name of Grantee: | Turck Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | PD67-LAIRD-TWI-BLE |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.093 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.0101 |
| Power Output listed is Conducted. Modular Approval. This device is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. C2PC for portable use in PD67 handheld computer. SAR compliance for body-worn operating configurations is limited to the belt-clips, holsters or similar accessories that have no metallic component in the assembly. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for body, and simultaneous extremity (hand) exposure conditions are 1.11 W/kg, 0.72 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 8jZfu9jmsfbk7fSnBaFv/A==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Turck Inc. 5000 Fernbrook Lane North Plymouth, MN 55446 United States |
Date of Grant: 09/08/2020 Application Dated: 09/08/2020 |
| Attention: Thomas Miller , Sr. Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ACBRTFBWIFIBT |
| Name of Grantee: | Turck Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | PD67-LAIRD-TWI-BLE |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.093 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.0101 |
| Power Output listed is Conducted. Modular Approval. This device is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. C2PC for portable use in PD67 handheld computer. SAR compliance for body-worn operating configurations is limited to the belt-clips, holsters or similar accessories that have no metallic component in the assembly. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for body, and simultaneous extremity (hand) exposure conditions are 1.11 W/kg, 0.72 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Element Materials Technology Portland - Evergreen 6775 NE Evergreen Parkway, Suite 400 Hillsboro, OR 97124 |
Date of Grant: 06/03/2020 Application Dated: 06/03/2020 |
| Turck Inc. |
| 5000 Fernbrook Lane North |
| Plymouth, MN 55446 |
| Attention: Thomas Miller , Sr. Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ACBRTFBWIFIBT |
| Name of Grantee: | Turck Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | PD67-LAIRD-TIWI-BLE |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.093 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.0101 |
| Power Output listed is Conducted. Modular Approval. This device is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 2ahnfoK7I3APi5Ee29ktVw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Turck Inc. 5000 Fernbrook Lane North Plymouth, MN 55446 United States |
Date of Grant: 06/03/2020 Application Dated: 06/03/2020 |
| Attention: Thomas Miller , Sr. Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ACBRTFBWIFIBT |
| Name of Grantee: | Turck Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | PD67-LAIRD-TIWI-BLE |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.093 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.0101 |
| Power Output listed is Conducted. Modular Approval. This device is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Element Materials Technology Portland - Evergreen 6775 NE Evergreen Parkway, Suite 400 Hillsboro, OR 97124 |
Date of Grant: 09/08/2020 Application Dated: 09/08/2020 |
| Turck Inc. |
| 5000 Fernbrook Lane North |
| Plymouth, MN 55446 |
| Attention: Thomas Miller , Sr. Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ACBRTFBWIFIBT |
| Name of Grantee: | Turck Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | PD67-LAIRD-TWI-BLE |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0063 |
| Power Output listed is conducted. Modular Approval. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. C2PC for portable use in PD67 handheld computer. SAR compliance for body-worn operating configurations is limited to the belt-clips, holsters or similar accessories that have no metallic component in the assembly. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for body, and simultaneous extremity (hand) exposure conditions are 1.11 W/kg, 0.72 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 1mc3lgRKTv2oennOszNA/Q==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Turck Inc. 5000 Fernbrook Lane North Plymouth, MN 55446 United States |
Date of Grant: 09/08/2020 Application Dated: 09/08/2020 |
| Attention: Thomas Miller , Sr. Compliance Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ACBRTFBWIFIBT |
| Name of Grantee: | Turck Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | PD67-LAIRD-TWI-BLE |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0063 |
| Power Output listed is conducted. Modular Approval. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. C2PC for portable use in PD67 handheld computer. SAR compliance for body-worn operating configurations is limited to the belt-clips, holsters or similar accessories that have no metallic component in the assembly. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for body, and simultaneous extremity (hand) exposure conditions are 1.11 W/kg, 0.72 W/kg, respectively. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |