FCC ID 2ACFIWM7911B

802.11n WiFi module

by DigiLife Technologies Co., Ltd.

Grantee Code: 2ACFI   Product Code: WM7911B
Latest application date: 2014-09-23

FCC ID Device Details

FCC ID2ACFIWM7911B
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2ACFI
Product CodeWM7911B
Applicant BusinessDigiLife Technologies Co., Ltd. 🇹🇼
Related Domains wimi.com.tw
Equipment Class802.11n WiFi module
Test FirmBureau Veritas CPS (H.K.) Ltd., Taoyuan Branch

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2014-09-23
2412-2462 MHzOriginal Equipment2014-08-28

Exhibits

DocumentTypeAvailableFile
User Manual.pdfUsers Manual2014-09-23PDF 4.3 MB
User Manual.pdfUsers Manual2014-08-28PDF 385 KB
Internal Photos.pdfInternal Photos2014-09-23PDF 4.6 MB
Internal Photos.pdfInternal Photos2014-08-28PDF 792.8 KB
External Photos.pdfExternal Photos2014-09-23PDF 3.3 MB
External Photos.pdfExternal Photos2014-08-28PDF 212.1 KB
Label and Location.pdfID Label/Location Info2014-09-23PDF 1.3 MB
Label.pdfID Label/Location Info2014-08-28PDF 23.4 KB
Test Setup Photos (SAR).pdfTest Setup Photos2014-09-23PDF 526.6 KB
Test Set Up photo (SAR).pdfTest Setup Photos2014-08-28PDF 465.5 KB
Test Set Up photo.pdfTest Setup Photos2014-08-28PDF 348.8 KB
Test Report.pdfTest Report2014-08-28PDF 1.1 MB
Attestation (Channel and Mode Declaration).pdfAttestation Statements2014-08-28PDF 723.4 KB
Cover Letter (Agent Authorization).pdfCover Letter(s)2014-09-23PDF 317.9 KB
Cover Letter (Description of Change).pdfCover Letter(s)2014-09-23PDF 42.4 KB
Confidentiality Request.pdfCover Letter(s)2014-08-28PDF 954.5 KB
Cover Letter (Agent Authorization).pdfCover Letter(s)2014-08-28PDF 855 KB
Cover Letter (Modular Approval Request).pdfCover Letter(s)2014-08-28PDF 45 KB
RF Exposure Info (SAR).pdfRF Exposure Info2014-09-23PDF 2.3 MB
RF Exposure Info (SAR).pdfRF Exposure Info2014-08-28PDF 2.3 MB
Block Diagram.pdf Metadata onlyBlock DiagramPDF 83.5 KB
Schematics.pdf Metadata onlySchematicsPDF 113.7 KB
Operational Description.pdf Metadata onlyOperational DescriptionPDF 13.7 KB

Application Information

Application IDqbfSK41P7rUziPnx0L2Ftg==
Final Action Date2014-09-23
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0023645351
ModelWM7911B
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device Description802.11n WiFi module
Responsible PartyJoan Chao, Product Administrator, joan.chao@wimi.com.tw , 886-2-27978686
Test FirmRichard Chen, Bureau Veritas CPS (H.K.) Ltd., Taoyuan Branch, richard.chen@bureauveritas.com , +886-3-2600884
TCB Emailcertification@curtis-straus.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsClass II Permissive Change for adding a potable platform for DigiLife Life Cam: Model: i3, i3-1, Life-Shot FHD300 and Add Eye. The highest reported SAR value for head and body-worn use conditions are 0.27 W/kg and 0.25 W/kg. Output power listed is conducted. SAR compliance has been demonstrated as described in this filing. Single Modular Approval. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 1cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device may be used with this transmitter. The highest reported SAR values for head and body-worn accessory use conditions are 0.35 W/kg and 0.34 W/kg, respectively.

Applications

Application IDDatePurpose
qbfSK41P7rUziPnx0L2Ftg==2014-09-23Class II permissive change or modification of presently authorized equipment
YP5ILavAdM3gszIs3oYi0A==2014-08-28Original Equipment

Equipment Authorization

FrequencyOutputRules
2412-2462 MHz0.285000015C

Grants

TCB Grant - Application YP5ILavAdM3gszIs3oYi0A==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
One Distribution Center Circle Suite #1
Littleton, MA 01460
Date of Grant: 08/28/2014

Application Dated: 08/28/2014
DigiLife Technologies Co., Ltd.
8F, No. 51, Ln.258, Ruiguang Rd., Neihu Dist.
Taipei, 114
Taiwan
 
Attention: Joan Chao , Product Administrator

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ACFIWM7911B
Name of Grantee:  DigiLife Technologies Co., Ltd.
Equipment Class: Digital Transmission System
Notes: 802.11n WiFi module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.285  

Output power listed is conducted. SAR compliance has been demonstrated as described in this filing. Single Modular Approval. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 1cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device may be used with this transmitter. The highest reported SAR values for head and body-worn accessory use conditions are 0.35 W/kg and 0.34 W/kg, respectively.

EAS Grant - Application YP5ILavAdM3gszIs3oYi0A==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

DigiLife Technologies Co., Ltd.
8F, No. 51, Ln.258, Ruiguang Rd., Neihu Dist.
Taipei, 114
Taiwan
  Date of Grant: 08/28/2014

Application Dated: 08/28/2014
 
Attention: Joan Chao , Product Administrator

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ACFIWM7911B
Name of Grantee:  DigiLife Technologies Co., Ltd.
Equipment Class: Digital Transmission System
Notes: 802.11n WiFi module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.285  

Output power listed is conducted. SAR compliance has been demonstrated as described in this filing. Single Modular Approval. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 1cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device may be used with this transmitter. The highest reported SAR values for head and body-worn accessory use conditions are 0.35 W/kg and 0.34 W/kg, respectively.



TCB Grant - Application qbfSK41P7rUziPnx0L2Ftg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
One Distribution Center Circle Suite #1
Littleton, MA 01460
Date of Grant: 09/23/2014

Application Dated: 09/23/2014
DigiLife Technologies Co., Ltd.
8F, No. 51, Ln.258, Ruiguang Rd., Neihu Dist.
Taipei, 114
Taiwan
 
Attention: Joan Chao , Product Administrator

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ACFIWM7911B
Name of Grantee:  DigiLife Technologies Co., Ltd.
Equipment Class: Digital Transmission System
Notes: 802.11n WiFi module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.285  

Class II Permissive Change for adding a potable platform for DigiLife Life Cam: Model: i3, i3-1, Life-Shot FHD300 and Add Eye. The highest reported SAR value for head and body-worn use conditions are 0.27 W/kg and 0.25 W/kg.

Output power listed is conducted. SAR compliance has been demonstrated as described in this filing. Single Modular Approval. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 1cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device may be used with this transmitter. The highest reported SAR values for head and body-worn accessory use conditions are 0.35 W/kg and 0.34 W/kg, respectively.


EAS Grant - Application qbfSK41P7rUziPnx0L2Ftg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

DigiLife Technologies Co., Ltd.
8F, No. 51, Ln.258, Ruiguang Rd., Neihu Dist.
Taipei, 114
Taiwan
  Date of Grant: 09/23/2014

Application Dated: 09/23/2014
 
Attention: Joan Chao , Product Administrator

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ACFIWM7911B
Name of Grantee:  DigiLife Technologies Co., Ltd.
Equipment Class: Digital Transmission System
Notes: 802.11n WiFi module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.285  

Class II Permissive Change for adding a potable platform for DigiLife Life Cam: Model: i3, i3-1, Life-Shot FHD300 and Add Eye. The highest reported SAR value for head and body-worn use conditions are 0.27 W/kg and 0.25 W/kg.

Output power listed is conducted. SAR compliance has been demonstrated as described in this filing. Single Modular Approval. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 1cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installation only. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device may be used with this transmitter. The highest reported SAR values for head and body-worn accessory use conditions are 0.35 W/kg and 0.34 W/kg, respectively.



Mail To: