FCC ID 2ACG9-SNAP

Mobile Phone

by CONEDERA S.A.

Grantee Code: 2ACG9   Product Code: SNAP
Latest application date: 2019-01-18

FCC ID Device Details

FCC ID2ACG9-SNAP
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2ACG9
Product CodeSNAP
Applicant BusinessCONEDERA S.A. 🇪🇨
Related Domains viteltek.com
Equipment ClassMobile Phone
Test FirmBay Area Compliance Laboratories Corp. (Shenzhen)

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzOriginal Equipment2019-01-18
824.2-848.8 MHzOriginal Equipment2019-01-18

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2019-01-18PDF 73.9 KB
Internal PhotosInternal Photos2019-01-18PDF 2.7 MB
External PhotosExternal Photos2019-01-18PDF 742.8 KB
Label and Label LocationID Label/Location Info2019-01-18PDF 189.6 KB
Test Setup PhotosTest Setup Photos2019-01-18PDF 312.1 KB
Test Setup PhotosTest Setup Photos2019-01-18PDF 477.6 KB
SAR Test ReportRF Exposure Info2019-01-18PDF 1.6 MB
Test ReportTest Report2019-01-18PDF 455 KB
Test ReportTest Report2019-01-18PDF 556.8 KB
Test ReportTest Report2019-01-18PDF 1.1 MB
Authorization LetterCover Letter(s)2019-01-18PDF 141.7 KB
Confidential LetterCover Letter(s)2019-01-18PDF 271.5 KB
SAR Probe & Dipole Cal CertRF Exposure Info2019-01-18PDF 4.4 MB
SAR Scan PlotsRF Exposure Info2019-01-18PDF 1.2 MB
SAR Setup PhotosRF Exposure Info2019-01-18PDF 1.6 MB
Block Diagram Metadata onlyBlock DiagramPDF 70.7 KB
Schematics Metadata onlySchematicsPDF 223.6 KB
Operational Description Metadata onlyOperational DescriptionPDF 160 KB
Part List Metadata onlyParts List/Tune Up InfoPDF 44.4 KB
Tune Up Procedure Metadata onlyParts List/Tune Up InfoPDF 329.9 KB

Application Information

Application IDOmKuPWvZMY+itMPtgpKcsw==
Final Action Date2019-01-18
Application PurposeOriginal Equipment
Applicant FRN0023665706
ModelSNAP
Equipment ClassJBP - Part 15 Class B Computing Device Peripheral
Device DescriptionMobile Phone
Responsible Partyjorge rosero, President, jorgerosero@viteltek.com , +593994501502
Test FirmWell Wang, Bay Area Compliance Laboratories Corp. (Shenzhen), qa.sz@baclcorp.com , +86 (0) 755 33320018
TCB Emailbacl.regulatory@baclcorp.com
TCB ScopeA1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo

Applications

Application IDDatePurpose
OmKuPWvZMY+itMPtgpKcsw==2019-01-18Original Equipment
AITzpt0pqJcjp50UjfyQdA==2019-01-18Original Equipment
7lB69xvflF3CP7TyVt16fg==2019-01-18Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRulesGrant Notes
15BCC
824.2-848.8 MHz1.6222.5ppm244KGXW22H
1850.2-1909.8 MHz0.6612.5ppm245KGXW24E
2402-2480 MHz0.004000015CCC

Grants

TCB Grant - Application OmKuPWvZMY+itMPtgpKcsw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratory Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
Date of Grant: 01/18/2019

Application Dated: 01/18/2019
CONEDERA S.A.
ALBORADA 10 ETAPA AVE. BENJAMIN
CARRION C.C.LA ROTONDA LOCAT 2
Guayaquil,
Ecuador
 
Attention: jorge rosero , President

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ACG9-SNAP
Name of Grantee:  CONEDERA S.A.
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: Mobile Phone
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15B  - 


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application OmKuPWvZMY+itMPtgpKcsw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

CONEDERA S.A.
ALBORADA 10 ETAPA AVE. BENJAMIN CARRION C.C.LA ROTONDA LOCAT 2
Guayaquil,
Ecuador
  Date of Grant: 01/18/2019

Application Dated: 01/18/2019
 
Attention: jorge rosero , President

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ACG9-SNAP
Name of Grantee:  CONEDERA S.A.
Equipment Class: Part 15 Class B Computing Device Peripheral
Notes: Mobile Phone
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15B  - 


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application AITzpt0pqJcjp50UjfyQdA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratory Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
Date of Grant: 01/18/2019

Application Dated: 01/18/2019
CONEDERA S.A.
ALBORADA 10 ETAPA AVE. BENJAMIN
CARRION C.C.LA ROTONDA LOCAT 2
Guayaquil,
Ecuador
 
Attention: jorge rosero , President

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ACG9-SNAP
Name of Grantee:  CONEDERA S.A.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Mobile Phone
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.004  

Output power listed is conducted.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application AITzpt0pqJcjp50UjfyQdA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

CONEDERA S.A.
ALBORADA 10 ETAPA AVE. BENJAMIN CARRION C.C.LA ROTONDA LOCAT 2
Guayaquil,
Ecuador
  Date of Grant: 01/18/2019

Application Dated: 01/18/2019
 
Attention: jorge rosero , President

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ACG9-SNAP
Name of Grantee:  CONEDERA S.A.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Mobile Phone
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.004  

Output power listed is conducted.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 7lB69xvflF3CP7TyVt16fg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratory Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
Date of Grant: 01/18/2019

Application Dated: 01/18/2019
CONEDERA S.A.
ALBORADA 10 ETAPA AVE. BENJAMIN
CARRION C.C.LA ROTONDA LOCAT 2
Guayaquil,
Ecuador
 
Attention: jorge rosero , President

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ACG9-SNAP
Name of Grantee:  CONEDERA S.A.
Equipment Class: PCS Licensed Transmitter held to ear
Notes: Mobile Phone
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.2  -  848.8 1.622 2.5  PM 244KGXW
24E 1850.2  -  1909.8 0.661 2.5  PM 245KGXW

Output power listed is ERP for operation below 1 GHz and EIRP for operation above 1 GHz. The antenna(s) used for this transmitter must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. SAR compliance for body-worn operating conditions is restricted to belt clips, holsters or similar accessories that have no metallic component in the assembly and must provide a minimum separation distance of 5 mm between the device and the body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, and simultaneous transmission exposure conditions are 0.50 W/kg, 1.37 W/kg, and 1.56 W/kg, respectively.

This device contains functions that are not operational in U.S Territories. This filing is only applicable for US operations.


EAS Grant - Application 7lB69xvflF3CP7TyVt16fg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

CONEDERA S.A.
ALBORADA 10 ETAPA AVE. BENJAMIN CARRION C.C.LA ROTONDA LOCAT 2
Guayaquil,
Ecuador
  Date of Grant: 01/18/2019

Application Dated: 01/18/2019
 
Attention: jorge rosero , President

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ACG9-SNAP
Name of Grantee:  CONEDERA S.A.
Equipment Class: PCS Licensed Transmitter held to ear
Notes: Mobile Phone
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.2  -  848.8 1.622 2.5  PM 244KGXW
24E 1850.2  -  1909.8 0.661 2.5  PM 245KGXW

Output power listed is ERP for operation below 1 GHz and EIRP for operation above 1 GHz. The antenna(s) used for this transmitter must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. SAR compliance for body-worn operating conditions is restricted to belt clips, holsters or similar accessories that have no metallic component in the assembly and must provide a minimum separation distance of 5 mm between the device and the body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, and simultaneous transmission exposure conditions are 0.50 W/kg, 1.37 W/kg, and 1.56 W/kg, respectively.

This device contains functions that are not operational in U.S Territories. This filing is only applicable for US operations.



Mail To: