FCC ID 2ACOE-WG233

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

MiCOM Labs 575 Boulder Court Pleasanton, CA 94566

Date of Grant: 05/27/2020 Application Dated: 05/27/2020

Skylab M&C Technology Co.,Ltd.

6/F,Building 9,Lijincheng park,

Gongye East Rd,Longhua St,Longhua District,

Shenzhen, 518109 China

Attention: Sam Chen , manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2ACOE-WG233
Name of Grantee:	Skylab M&C Technology Co.,Ltd.
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	WIFI module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
38 CC MO	15E	5180.0  -  5240.0	0.0168
38 CC MO	15E	5745.0  -  5825.0	0.0137

Single Modular Approval. Output power listed is maximum combined conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

38:	This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Skylab M&C Technology Co.,Ltd. 6/F,Building 9,Lijincheng park, Gongye East Rd,Longhua St,Longhua District, Shenzhen, 518109 China

Date of Grant: 05/27/2020 Application Dated: 05/27/2020

Attention: Sam Chen , manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2ACOE-WG233
Name of Grantee:	Skylab M&C Technology Co.,Ltd.
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	WIFI module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
38 CC MO	15E	5180.0  -  5240.0	0.0168
38 CC MO	15E	5745.0  -  5825.0	0.0137

Single Modular Approval. Output power listed is maximum combined conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

38:	This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application SVJdWhFTtVGabI+FZxqSNg==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

MiCOM Labs 575 Boulder Court Pleasanton, CA 94566

Date of Grant: 05/27/2020 Application Dated: 05/27/2020

Skylab M&C Technology Co.,Ltd.

6/F,Building 9,Lijincheng park,

Gongye East Rd,Longhua St,Longhua District,

Shenzhen, 518109 China

Attention: Sam Chen , manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2ACOE-WG233
Name of Grantee:	Skylab M&C Technology Co.,Ltd.
Equipment Class:	Digital Transmission System
Notes:	WIFI module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15C	2412.0  -  2462.0	0.0557

Single Modular Approval. Output power listed is maximum combined conducted power. This device contains 20 and 40 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Skylab M&C Technology Co.,Ltd. 6/F,Building 9,Lijincheng park, Gongye East Rd,Longhua St,Longhua District, Shenzhen, 518109 China

Date of Grant: 05/27/2020 Application Dated: 05/27/2020

Attention: Sam Chen , manager

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2ACOE-WG233
Name of Grantee:	Skylab M&C Technology Co.,Ltd.
Equipment Class:	Digital Transmission System
Notes:	WIFI module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15C	2412.0  -  2462.0	0.0557

Single Modular Approval. Output power listed is maximum combined conducted power. This device contains 20 and 40 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: