FCC ID 2ACOE-WG225

WIFI Module

by Skylab M&C; Technology Co.,Ltd.

Grantee Code: 2ACOE   Product Code: WG225
Latest application date: 2020-10-29

FCC ID Device Details

FCC ID2ACOE-WG225
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2ACOE
Product CodeWG225
Applicant BusinessSkylab M&C; Technology Co.,Ltd. 🇨🇳
Related Domains skylab.com.cn
Equipment ClassWIFI Module
Test FirmSHENZHEN TONGCE TESTING LAB

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzOriginal Equipment2020-10-29
5180-5240 MHzOriginal Equipment2020-10-29
2402-2480 MHzOriginal Equipment2020-10-29

Exhibits

DocumentTypeAvailableFile
User-ManualUsers Manual2020-10-29PDF 902 KB
Int_PhotosInternal Photos2020-10-29PDF 271.6 KB
Internal PhotosInternal Photos2020-10-29PDF 271.6 KB
External_PhotosExternal Photos2020-10-29PDF 545.9 KB
External_photosExternal Photos2020-10-29PDF 545.9 KB
LabelID Label/Location Info2020-10-29PDF 94 KB
Label and Label_LocationID Label/Location Info2020-10-29PDF 94 KB
Test_Setup_PhotosTest Setup Photos2020-10-29PDF 539.6 KB
Test_Setup_photosTest Setup Photos2020-10-29PDF 539.6 KB
TCT200907E018 FCC ID 15.247 BTTest Report2020-10-29PDF 3.1 MB
TCT200907E063 FCC ID 15.247 LETest Report2020-10-29PDF 1.5 MB
TCT200907E064 FCC ID 15.247 WIFI-1Test Report2020-10-29PDF 5.7 MB
TCT200907E064 FCC ID 15.247 WIFI-2Test Report2020-10-29PDF 5.6 MB
TCT200907E065 FCC ID 15.407 5G WIFI-1Test Report2020-10-29PDF 5.3 MB
TCT200907E065 FCC ID 15.407 5G WIFI-2Test Report2020-10-29PDF 4.3 MB
Agent Authorization Rev 1.0Cover Letter(s)2020-10-29PDF 20 KB
Agent_AuthorizationCover Letter(s)2020-10-29PDF 20 KB
FCC Modular Approval Request Rev 3.0Cover Letter(s)2020-10-29PDF 26.1 KB
FCC Software Configuration Control Declaration Rev1.1Cover Letter(s)2020-10-29PDF 18.2 KB
FCC_Long_Term_Only_Confidentiality_RequestCover Letter(s)2020-10-29PDF 55.9 KB
FCC_Short_&_Long_Term_Confidentiality_RequestCover Letter(s)2020-10-29PDF 55.9 KB
RF ExposureRF Exposure Info2020-10-29PDF 74.6 KB
RF_exposure_reportRF Exposure Info2020-10-29PDF 74.6 KB
Block Diagram Metadata onlyBlock DiagramPDF 108.2 KB
SCH Metadata onlySchematicsPDF 113.8 KB
Schematic Metadata onlySchematicsPDF 113.8 KB
Operation Description Metadata onlyOperational DescriptionPDF 436.9 KB
Operational_Description Metadata onlyOperational DescriptionPDF 436.9 KB
FCCSOFTWARESECURITYDESCRIPTION Metadata onlySDR Software/Security InfPDF 123.4 KB

Application Information

Application IDvpDx4yxS8Sfecv1ewgUPQg==
Final Action Date2020-10-29
Application PurposeOriginal Equipment
Applicant FRN0023759574
ModelWG225
Frequency Range2402-2480 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionWIFI Module
Responsible PartySam Chen, manager, sam.chen@skylab.com.cn , 0755-83408210
Technical ContactSkylab M&C; Technology Co, Ltd, sam.chen@skylab.com.cn
Test FirmBeryl Zhao, SHENZHEN TONGCE TESTING LAB, berylzhao@tct-lab.com , +8675527208735
TCB Emailcertification@micomlabs.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsSingle Modular Approval. Output power listed is maximum conducted power. This device contains 20 and 40 MHz signal bandwidth. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device.OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter.

Applications

Application IDDatePurpose
vpDx4yxS8Sfecv1ewgUPQg==2020-10-29Original Equipment
sSdOtQ2FGPbJ9LJbxXDBlQ==2020-10-29Original Equipment
WJxnCyYYMUL7ps25+vgDhA==2020-10-29Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.004815CCC
2402-2480 MHz0.006800015CCC
2412-2462 MHz0.036615CCC
5180-5240 MHz0.00715E38, CC
5745-5825 MHz0.009515E38, CC

Grants

TCB Grant - Application WJxnCyYYMUL7ps25+vgDhA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 10/29/2020

Application Dated: 10/29/2020
Skylab M&C Technology Co.,Ltd.
6/F,Building 9,Lijincheng park,
Gongye East Rd,Longhua St,Longhua District,
Shenzhen, 518109
China
 
Attention: Sam Chen , manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ACOE-WG225
Name of Grantee:  Skylab M&C Technology Co.,Ltd.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: WIFI Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0068  

Single Modular Approval. Output power listed is maximum conducted power. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device.OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application WJxnCyYYMUL7ps25+vgDhA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Skylab M&C Technology Co.,Ltd.
6/F,Building 9,Lijincheng park, Gongye East Rd,Longhua St,Longhua District,
Shenzhen, 518109
China
  Date of Grant: 10/29/2020

Application Dated: 10/29/2020
 
Attention: Sam Chen , manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ACOE-WG225
Name of Grantee:  Skylab M&C Technology Co.,Ltd.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: WIFI Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0068  

Single Modular Approval. Output power listed is maximum conducted power. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device.OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application vpDx4yxS8Sfecv1ewgUPQg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 10/29/2020

Application Dated: 10/29/2020
Skylab M&C Technology Co.,Ltd.
6/F,Building 9,Lijincheng park,
Gongye East Rd,Longhua St,Longhua District,
Shenzhen, 518109
China
 
Attention: Sam Chen , manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ACOE-WG225
Name of Grantee:  Skylab M&C Technology Co.,Ltd.
Equipment Class: Digital Transmission System
Notes: WIFI Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0048  
CC 15C 2412.0  -  2462.0 0.0366  

Single Modular Approval. Output power listed is maximum conducted power. This device contains 20 and 40 MHz signal bandwidth. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device.OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application vpDx4yxS8Sfecv1ewgUPQg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Skylab M&C Technology Co.,Ltd.
6/F,Building 9,Lijincheng park, Gongye East Rd,Longhua St,Longhua District,
Shenzhen, 518109
China
  Date of Grant: 10/29/2020

Application Dated: 10/29/2020
 
Attention: Sam Chen , manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ACOE-WG225
Name of Grantee:  Skylab M&C Technology Co.,Ltd.
Equipment Class: Digital Transmission System
Notes: WIFI Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0048  
CC 15C 2412.0  -  2462.0 0.0366  

Single Modular Approval. Output power listed is maximum conducted power. This device contains 20 and 40 MHz signal bandwidth. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device.OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application sSdOtQ2FGPbJ9LJbxXDBlQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 10/29/2020

Application Dated: 10/29/2020
Skylab M&C Technology Co.,Ltd.
6/F,Building 9,Lijincheng park,
Gongye East Rd,Longhua St,Longhua District,
Shenzhen, 518109
China
 
Attention: Sam Chen , manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ACOE-WG225
Name of Grantee:  Skylab M&C Technology Co.,Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: WIFI Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC 15E 5180.0  -  5240.0 0.007  
38 CC 15E 5745.0  -  5825.0 0.0095  

Single Modular Approval. Output power listed is maximum conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device.OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter.

38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application sSdOtQ2FGPbJ9LJbxXDBlQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Skylab M&C Technology Co.,Ltd.
6/F,Building 9,Lijincheng park, Gongye East Rd,Longhua St,Longhua District,
Shenzhen, 518109
China
  Date of Grant: 10/29/2020

Application Dated: 10/29/2020
 
Attention: Sam Chen , manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ACOE-WG225
Name of Grantee:  Skylab M&C Technology Co.,Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: WIFI Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC 15E 5180.0  -  5240.0 0.007  
38 CC 15E 5745.0  -  5825.0 0.0095  

Single Modular Approval. Output power listed is maximum conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device.OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: