FCC ID 2ACS5-H850
Radio Transmit Module
by Yuneec Technology Co., Limited
Grantee Code: 2ACS5 Product Code: H850
Latest application date: 2022-06-24
FCC ID Device Details
| FCC ID | 2ACS5-H850 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2ACS5 |
| Product Code | H850 |
| Applicant Business | Yuneec Technology Co., Limited 🇨🇳 |
| Related Domains |  yuneec.com |
| Equipment Class | Radio Transmit Module |
| Test Firm | Shenzhen BALUN Technology Co., Ltd. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5745-5825 MHz | Original Equipment | 2022-06-24 |
| 2406-2466 MHz | Original Equipment | 2022-06-24 |
| 2405-2473 MHz | Original Equipment | 2022-06-24 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| user manual | Users Manual | 2022-12-21 | PDF 1.3 MB |
| user manual4 | Users Manual | 2022-12-21 | PDF 1.3 MB |
| Internal Photos | Internal Photos | 2022-12-21 | PDF 516.5 KB |
| External Photos | External Photos | 2022-12-21 | PDF 1.3 MB |
| external photo | External Photos | 2022-12-21 | PDF 1.3 MB |
| LABEL | ID Label/Location Info | 2022-06-24 | PDF 490.3 KB |
| label location | ID Label/Location Info | 2022-06-24 | PDF 490.3 KB |
| Test Setup Photos | Test Setup Photos | 2022-12-21 | PDF 989.9 KB |
| Test setup photos | Test Setup Photos | 2022-12-21 | PDF 989.9 KB |
| Test Report | Test Report | 2022-06-24 | PDF 4.5 MB |
| Test Report | Test Report | 2022-06-24 | PDF 2.4 MB |
| Test Report | Test Report | 2022-06-24 | PDF 3.7 MB |
| Agent Authorization Rev 1.0 | Cover Letter(s) | 2022-06-24 | PDF 16.8 KB |
| FCC AuthorizationLetter | Cover Letter(s) | 2022-06-24 | PDF 117.3 KB |
| FCC Short & Long Term Confidentiality Request Rev4.1 | Cover Letter(s) | 2022-06-24 | PDF 916.6 KB |
| FCC Short & Long Term Confidentiality Request Rev4.1 Metadata only | Cover Letter(s) | 2022-06-24 | PDF 736.2 KB |
| FCC Software Configuration Control Declaration Rev1.1 | Cover Letter(s) | 2022-06-24 | PDF 113.4 KB |
| FCCModularApprovalRequest | Cover Letter(s) | 2022-06-24 | PDF 150.3 KB |
| FCCModularApprovalRequest | Cover Letter(s) | 2022-06-24 | PDF 516.5 KB |
| RFExposure | RF Exposure Info | 2022-06-24 | PDF 736.2 KB |
| Blocking Metadata only | Block Diagram | PDF 16.3 KB | |
| SCH Metadata only | Schematics | PDF 119.5 KB | |
| OP Metadata only | Operational Description | PDF 109.5 KB | |
| FCC Software Security Requirement Description for UNII Devices V02 Metadata only | SDR Software/Security Inf | PDF 185.1 KB |
Application Information
| Application ID | xthbxbbiRCWmfl3UORLqmQ== |
|---|---|
| Final Action Date | 2022-06-24 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0023807993 |
| Model | H850 |
| Frequency Range | 5745-5825 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | Radio Transmit Module |
| Responsible Party | Weina Ke, Chairman Assistant, creana@yuneec.com , 0512-50121243 |
| Technical Contact | Yuneec Technology Co., Limited, creana@yuneec.com |
| Test Firm | Hanson Lin, Shenzhen BALUN Technology Co., Ltd., Hanson.Lin@baluntek.com  , 86-755-66833830 |
| TCB Email | certification@micomlabs.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 12/21/2022 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Single Modular Approval Output power listed is conducted power. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| xthbxbbiRCWmfl3UORLqmQ== | 2022-06-24 | Original Equipment |
| qos3+4aChO0UK7ZBtF8NKg== | 2022-06-24 | Original Equipment |
| WrMuE/QZQ4R2O5XgYsvyrA== | 2022-06-24 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application xthbxbbiRCWmfl3UORLqmQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 06/24/2022 Application Dated: 06/24/2022 |
| Yuneec Technology Co., Limited |
| Unit 2301, 23/F, 9 Chong Yip Street |
| Kwun Tong, Kowloon, Hong Kong |
| HongKong, China |
| Attention: Weina Ke , Chairman Assistant |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ACS5-H850 |
| Name of Grantee: | Yuneec Technology Co., Limited |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Radio Transmit Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5745.0 - 5825.0 | 0.0354 |
| Single Modular Approval Output power listed is conducted power. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application xthbxbbiRCWmfl3UORLqmQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Yuneec Technology Co., Limited Unit 2301, 23/F, 9 Chong Yip Street Kwun Tong, Kowloon, Hong Kong HongKong, China |
Date of Grant: 06/24/2022 Application Dated: 06/24/2022 |
| Attention: Weina Ke , Chairman Assistant |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ACS5-H850 |
| Name of Grantee: | Yuneec Technology Co., Limited |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Radio Transmit Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5745.0 - 5825.0 | 0.0354 |
| Single Modular Approval Output power listed is conducted power. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 06/24/2022 Application Dated: 06/24/2022 |
| Yuneec Technology Co., Limited |
| Unit 2301, 23/F, 9 Chong Yip Street |
| Kwun Tong, Kowloon, Hong Kong |
| HongKong, China |
| Attention: Weina Ke , Chairman Assistant |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ACS5-H850 |
| Name of Grantee: | Yuneec Technology Co., Limited |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Radio Transmit Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2405.0 - 2473.0 | 0.06992 |
| Single Modular Approval Output power listed is conducted power. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application WrMuE/QZQ4R2O5XgYsvyrA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Yuneec Technology Co., Limited Unit 2301, 23/F, 9 Chong Yip Street Kwun Tong, Kowloon, Hong Kong HongKong, China |
Date of Grant: 06/24/2022 Application Dated: 06/24/2022 |
| Attention: Weina Ke , Chairman Assistant |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ACS5-H850 |
| Name of Grantee: | Yuneec Technology Co., Limited |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Radio Transmit Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2405.0 - 2473.0 | 0.06992 |
| Single Modular Approval Output power listed is conducted power. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
MiCOM Labs 575 Boulder Court Pleasanton, CA 94566 |
Date of Grant: 06/24/2022 Application Dated: 06/24/2022 |
| Yuneec Technology Co., Limited |
| Unit 2301, 23/F, 9 Chong Yip Street |
| Kwun Tong, Kowloon, Hong Kong |
| HongKong, China |
| Attention: Weina Ke , Chairman Assistant |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ACS5-H850 |
| Name of Grantee: | Yuneec Technology Co., Limited |
| Equipment Class: | Digital Transmission System |
| Notes: | Radio Transmit Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2406.0 - 2466.0 | 0.18535 |
| Single Modular Approval Output power listed is conducted power. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application qos3+4aChO0UK7ZBtF8NKg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Yuneec Technology Co., Limited Unit 2301, 23/F, 9 Chong Yip Street Kwun Tong, Kowloon, Hong Kong HongKong, China |
Date of Grant: 06/24/2022 Application Dated: 06/24/2022 |
| Attention: Weina Ke , Chairman Assistant |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ACS5-H850 |
| Name of Grantee: | Yuneec Technology Co., Limited |
| Equipment Class: | Digital Transmission System |
| Notes: | Radio Transmit Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2406.0 - 2466.0 | 0.18535 |
| Single Modular Approval Output power listed is conducted power. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |