IQ-1565BT HOME STEREO SYSTEM Test Report ce FLYBALL ELECTRONIC (SHENZHEN) CO. LTD

FLYBALL ELECTRONIC (SHENZHEN) CO. LTD HOME STEREO SYSTEM

Page 1 of IQ-1565BT HOME STEREO SYSTEM Test Report ce FLYBALL ELECTRONIC (SHENZHEN) CO. LTD
Page 2 of IQ-1565BT HOME STEREO SYSTEM Test Report ce FLYBALL ELECTRONIC (SHENZHEN) CO. LTD
Page 3 of IQ-1565BT HOME STEREO SYSTEM Test Report ce FLYBALL ELECTRONIC (SHENZHEN) CO. LTD
Page 4 of IQ-1565BT HOME STEREO SYSTEM Test Report ce FLYBALL ELECTRONIC (SHENZHEN) CO. LTD
Page 5 of IQ-1565BT HOME STEREO SYSTEM Test Report ce FLYBALL ELECTRONIC (SHENZHEN) CO. LTD
Page 6 of IQ-1565BT HOME STEREO SYSTEM Test Report ce FLYBALL ELECTRONIC (SHENZHEN) CO. LTD
Page 7 of IQ-1565BT HOME STEREO SYSTEM Test Report ce FLYBALL ELECTRONIC (SHENZHEN) CO. LTD
Page 8 of IQ-1565BT HOME STEREO SYSTEM Test Report ce FLYBALL ELECTRONIC (SHENZHEN) CO. LTD
Page 9 of IQ-1565BT HOME STEREO SYSTEM Test Report ce FLYBALL ELECTRONIC (SHENZHEN) CO. LTD
Page 10 of IQ-1565BT HOME STEREO SYSTEM Test Report ce FLYBALL ELECTRONIC (SHENZHEN) CO. LTD
Page 11 of IQ-1565BT HOME STEREO SYSTEM Test Report ce FLYBALL ELECTRONIC (SHENZHEN) CO. LTD
Page 12 of IQ-1565BT HOME STEREO SYSTEM Test Report ce FLYBALL ELECTRONIC (SHENZHEN) CO. LTD
Page 13 of IQ-1565BT HOME STEREO SYSTEM Test Report ce FLYBALL ELECTRONIC (SHENZHEN) CO. LTD
Page 14 of IQ-1565BT HOME STEREO SYSTEM Test Report ce FLYBALL ELECTRONIC (SHENZHEN) CO. LTD
Page 15 of IQ-1565BT HOME STEREO SYSTEM Test Report ce FLYBALL ELECTRONIC (SHENZHEN) CO. LTD
Page 16 of IQ-1565BT HOME STEREO SYSTEM Test Report ce FLYBALL ELECTRONIC (SHENZHEN) CO. LTD
Page 17 of IQ-1565BT HOME STEREO SYSTEM Test Report ce FLYBALL ELECTRONIC (SHENZHEN) CO. LTD
Page 18 of IQ-1565BT HOME STEREO SYSTEM Test Report ce FLYBALL ELECTRONIC (SHENZHEN) CO. LTD
Page 19 of IQ-1565BT HOME STEREO SYSTEM Test Report ce FLYBALL ELECTRONIC (SHENZHEN) CO. LTD
Page 20 of IQ-1565BT HOME STEREO SYSTEM Test Report ce FLYBALL ELECTRONIC (SHENZHEN) CO. LTD
Page 21 of IQ-1565BT HOME STEREO SYSTEM Test Report ce FLYBALL ELECTRONIC (SHENZHEN) CO. LTD
Page 22 of IQ-1565BT HOME STEREO SYSTEM Test Report ce FLYBALL ELECTRONIC (SHENZHEN) CO. LTD
Page 23 of IQ-1565BT HOME STEREO SYSTEM Test Report ce FLYBALL ELECTRONIC (SHENZHEN) CO. LTD
Page 24 of IQ-1565BT HOME STEREO SYSTEM Test Report ce FLYBALL ELECTRONIC (SHENZHEN) CO. LTD
Page 25 of IQ-1565BT HOME STEREO SYSTEM Test Report ce FLYBALL ELECTRONIC (SHENZHEN) CO. LTD
Page 26 of IQ-1565BT HOME STEREO SYSTEM Test Report ce FLYBALL ELECTRONIC (SHENZHEN) CO. LTD
Page 27 of IQ-1565BT HOME STEREO SYSTEM Test Report ce FLYBALL ELECTRONIC (SHENZHEN) CO. LTD
Page 28 of IQ-1565BT HOME STEREO SYSTEM Test Report ce FLYBALL ELECTRONIC (SHENZHEN) CO. LTD
Page 29 of IQ-1565BT HOME STEREO SYSTEM Test Report ce FLYBALL ELECTRONIC (SHENZHEN) CO. LTD
Page 30 of IQ-1565BT HOME STEREO SYSTEM Test Report ce FLYBALL ELECTRONIC (SHENZHEN) CO. LTD
Page 31 of IQ-1565BT HOME STEREO SYSTEM Test Report ce FLYBALL ELECTRONIC (SHENZHEN) CO. LTD
Page 32 of IQ-1565BT HOME STEREO SYSTEM Test Report ce FLYBALL ELECTRONIC (SHENZHEN) CO. LTD
Page 33 of IQ-1565BT HOME STEREO SYSTEM Test Report ce FLYBALL ELECTRONIC (SHENZHEN) CO. LTD
Page 34 of IQ-1565BT HOME STEREO SYSTEM Test Report ce FLYBALL ELECTRONIC (SHENZHEN) CO. LTD
Page 35 of IQ-1565BT HOME STEREO SYSTEM Test Report ce FLYBALL ELECTRONIC (SHENZHEN) CO. LTD
Page 36 of IQ-1565BT HOME STEREO SYSTEM Test Report ce FLYBALL ELECTRONIC (SHENZHEN) CO. LTD
Page 37 of IQ-1565BT HOME STEREO SYSTEM Test Report ce FLYBALL ELECTRONIC (SHENZHEN) CO. LTD
Page 38 of IQ-1565BT HOME STEREO SYSTEM Test Report ce FLYBALL ELECTRONIC (SHENZHEN) CO. LTD
Page 39 of IQ-1565BT HOME STEREO SYSTEM Test Report ce FLYBALL ELECTRONIC (SHENZHEN) CO. LTD
Page 40 of IQ-1565BT HOME STEREO SYSTEM Test Report ce FLYBALL ELECTRONIC (SHENZHEN) CO. LTD
Page 41 of IQ-1565BT HOME STEREO SYSTEM Test Report ce FLYBALL ELECTRONIC (SHENZHEN) CO. LTD
Page 42 of IQ-1565BT HOME STEREO SYSTEM Test Report ce FLYBALL ELECTRONIC (SHENZHEN) CO. LTD
Page 43 of IQ-1565BT HOME STEREO SYSTEM Test Report ce FLYBALL ELECTRONIC (SHENZHEN) CO. LTD
Page 44 of IQ-1565BT HOME STEREO SYSTEM Test Report ce FLYBALL ELECTRONIC (SHENZHEN) CO. LTD
Page 45 of IQ-1565BT HOME STEREO SYSTEM Test Report ce FLYBALL ELECTRONIC (SHENZHEN) CO. LTD
Page 46 of IQ-1565BT HOME STEREO SYSTEM Test Report ce FLYBALL ELECTRONIC (SHENZHEN) CO. LTD
Page 47 of IQ-1565BT HOME STEREO SYSTEM Test Report ce FLYBALL ELECTRONIC (SHENZHEN) CO. LTD
Page 48 of IQ-1565BT HOME STEREO SYSTEM Test Report ce FLYBALL ELECTRONIC (SHENZHEN) CO. LTD
Page 49 of IQ-1565BT HOME STEREO SYSTEM Test Report ce FLYBALL ELECTRONIC (SHENZHEN) CO. LTD
Page 50 of IQ-1565BT HOME STEREO SYSTEM Test Report ce FLYBALL ELECTRONIC (SHENZHEN) CO. LTD
Page 51 of IQ-1565BT HOME STEREO SYSTEM Test Report ce FLYBALL ELECTRONIC (SHENZHEN) CO. LTD
Page 52 of IQ-1565BT HOME STEREO SYSTEM Test Report ce FLYBALL ELECTRONIC (SHENZHEN) CO. LTD
Page 53 of IQ-1565BT HOME STEREO SYSTEM Test Report ce FLYBALL ELECTRONIC (SHENZHEN) CO. LTD
Page 54 of IQ-1565BT HOME STEREO SYSTEM Test Report ce FLYBALL ELECTRONIC (SHENZHEN) CO. LTD
Page 55 of IQ-1565BT HOME STEREO SYSTEM Test Report ce FLYBALL ELECTRONIC (SHENZHEN) CO. LTD
Page 56 of IQ-1565BT HOME STEREO SYSTEM Test Report ce FLYBALL ELECTRONIC (SHENZHEN) CO. LTD
Page 57 of IQ-1565BT HOME STEREO SYSTEM Test Report ce FLYBALL ELECTRONIC (SHENZHEN) CO. LTD

TEST REPORT
Reference No. .................... :
WTS18S05112117W
FCC ID ................................ :
2AD33-IQ-1565BT
Applicant ............................ :
FLYBALL ELECTRONIC (SHENZHEN) CO. LTD
Address .............................. :
5-6 Building, Zhiji Industrial Park, Shenzhen, China
Manufacturer .................... :
FLYBALL ELECTRONIC (SHENZHEN) CO. LTD
Address .............................. :
5-6 Building, Zhiji Industrial Park, Shenzhen, China
Product............................... :
HOME STEREO SYSTEM
Model(s). ............................ :
HF8651KBU-H639, IQ-1565BT
Standards........................... :
FCC CFR47 Part 15.247:2017
Date of Receipt sample .... :
2018-05-18
Date of Test ....................... :
2018-05-21 to 2018-05-29
Date of Issue ...................... :
2018-05-30
Test Result ......................... :
Pass
Remarks:
The results shown in this test report refer only to the sample(s) tested, this test report cannot be
reproduced, except in full, without prior written permission of the company. The report would be invalid
without specific stamp of test institute and the signatures of compiler and approver.
Prepared By:
Waltek Services (Shenzhen) Co., Ltd.
Address: 1/F., Fukangtai Building, West Baima Road, Songgang Street, Baoan District, Shenzhen,
Guangdong, China
Tel :+86-755-83551033
Fax:+86-755-83552400
Compiled by:
Approved by:
Jack Wen / Project Engineer
Philo Zhong / Manager
Waltek Services (Shenzhen) Co.,Ltd.
http://www.waltek.com.cn
Page 1 of 57
Reference No.: WTS18S05112117W
Page 2 of 57
Laboratories Introduction
Waltek Services (Shenzhen) Co., Ltd is a professional third-party testing and certification laboratory
with multi-year product testing and certification experience, established strictly in accordance with ISO/IEC
17025 requirements, and accredited by ILAC (International Laboratory Accreditation Cooperation) member.
A2LA (American Association for Laboratory Accreditation) of USA, Meanwhile, Waltek has got recognition as
registration and accreditation laboratory from EMSD (Electrical and Mechanical Services Department), and
American Energy star, FCC(The Federal Communications Commission), CEC(California energy efficiency),
IC(Industry Canada). It’s the strategic partner and data recognition laboratory of international authoritative
organizations, such as Intertek(ETL-SEMKO), TÜV Rheinland, TÜV SÜD, etc.
Waltek Services (Shenzhen) Co., Ltd is one of the largest and the most comprehensive third party
testing laboratory in China. Our test capability covered four large fields: safety test. ElectroMagnetic
Compatibility(EMC), and energy performance, wireless radio. As a professional, comprehensive, justice
international test organization, we still keep the scientific and rigorous work attitude to help each client satisfy
the international standards and assist their product enter into globe market smoothly.
Waltek Services (Shenzhen) Co.,Ltd.
http://www.waltek.com.cn
Reference No.: WTS18S05112117W
Page 3 of 57
2.1 Test Facility
A. Accreditations for Conformity Assessment (International)
Country/Region
Accreditation Body
Scope
Note
USA
FCC ID \ DOC \ VOC
Canada
IC ID \ VOC
MIC-T \ MIC-R
EMCD \ RED
Taiwan
NCC
Hong Kong
OFCA
Australia
RCM
India
WPC
NTC
IDA
Japan
Europe
Thailand
A2LA
(Certificate No.: 4243.01)
International Services
Singapore
Note:
1.
FCC Designation No.: CN1201. Test Firm Registration No.: 523476.
2.
IC Canada Registration No.: 7760A
B.TCBs and Notify Bodies Recognized Testing Laboratory.
Recognized Testing Laboratory of …
Notify body number
TUV Rheinland
Intertek
Optional.
TUV SUD
SGS
Phoenix Testlab GmbH
0700
Element Materials Technology Warwick Ltd
0891
Timco Engineering, Inc.
1177
Eurofins Product Service GmbH
0681
Waltek Services (Shenzhen) Co.,Ltd.
http://www.waltek.com.cn
Reference No.: WTS18S05112117W
Page 4 of 57
Contents
Page
COVER PAGE ...................................................................................................................................... 1
LABORATORIES INTRODUCTION ................................................................................................................... 2
2.1
TEST FACILITY ................................................................................................................................................ 3
CONTENTS ............................................................................................................................................................ 4
REVISION HISTORY ............................................................................................................................................ 6
GENERAL INFORMATION .................................................................................................................................. 7
5.1
5.2
5.3
5.4
GENERAL DESCRIPTION OF E.U.T. ............................................................................................................... 7
DETAILS OF E.U.T. ......................................................................................................................................... 7
CHANNEL LIST ................................................................................................................................................. 8
TEST MODE ..................................................................................................................................................... 8
TEST SUMMARY .................................................................................................................................................. 9
EQUIPMENT USED DURING TEST ................................................................................................................ 10
7.1
7.2
7.3
7.4
CONDUCTED EMISSION .................................................................................................................................. 12
8.1
8.2
8.3
8.4
TEST PROCEDURE .................................................................................................................................... 35
TEST RESULT ........................................................................................................................................... 35
HOPPING CHANNEL SEPARATION .............................................................................................................. 41
13.1
13.2
14
TEST PROCEDURE .................................................................................................................................... 29
TEST RESULT ........................................................................................................................................... 29
MAXIMUM PEAK OUTPUT POWER ............................................................................................................... 35
12.1
12.2
13
TEST PROCEDURE .................................................................................................................................... 22
TEST RESULT ........................................................................................................................................... 23
20 DB BANDWIDTH MEASUREMENT ........................................................................................................... 29
11.1
11.2
12
EUT OPERATION........................................................................................................................................... 15
TEST SETUP .................................................................................................................................................. 16
SPECTRUM ANALYZER SETUP ...................................................................................................................... 17
TEST PROCEDURE ........................................................................................................................................ 18
CORRECTED AMPLITUDE & MARGIN CALCULATION ..................................................................................... 18
SUMMARY OF TEST RESULTS ....................................................................................................................... 19
BAND EDGE MEASUREMENT ........................................................................................................................ 22
10.1
10.2
11
E.U.T. OPERATION ....................................................................................................................................... 12
EUT SETUP ................................................................................................................................................... 12
MEASUREMENT DESCRIPTION ...................................................................................................................... 12
CONDUCTED EMISSION TEST RESULT ......................................................................................................... 13
RADIATED SPURIOUS EMISSIONS ............................................................................................................... 15
9.1
9.2
9.3
9.4
9.5
9.6
10
EQUIPMENTS LIST ......................................................................................................................................... 10
DESCRIPTION OF SUPPORT UNITS ............................................................................................................... 11
MEASUREMENT UNCERTAINTY ..................................................................................................................... 11
TEST EQUIPMENT CALIBRATION ................................................................................................................... 11
TEST PROCEDURE .................................................................................................................................... 41
TEST RESULT ........................................................................................................................................... 41
NUMBER OF HOPPING FREQUENCY ........................................................................................................... 47
14.1
14.2
TEST PROCEDURE .................................................................................................................................... 47
TEST RESULT ........................................................................................................................................... 47
Waltek Services (Shenzhen) Co.,Ltd.
http://www.waltek.com.cn
Reference No.: WTS18S05112117W
15
Page 5 of 57
DWELL TIME ....................................................................................................................................................... 49
15.1
15.2
TEST PROCEDURE .................................................................................................................................... 49
TEST RESULT ........................................................................................................................................... 49
16
ANTENNA REQUIREMENT .............................................................................................................................. 55
17
RF EXPOSURE .................................................................................................................................................... 56
17.1
REQUIREMENTS ........................................................................................................................................ 56
TEST RESULT .......................................................................................................................................................... 56
18
PHOTOGRAPHS – TEST SETUP PHOTOS .................................................................................................. 57
Waltek Services (Shenzhen) Co.,Ltd.
http://www.waltek.com.cn
Reference No.: WTS18S05112117W
Page 6 of 57
Revision History
Test report No.
WTS18S051121
17W
Date of
Receipt
sample
Date of Test
Date of
Issue
Purpose
Comment
Approved
2018-05-18
2018-05-21 –
2018-05-29
2018-05-30
original
Valid
Waltek Services (Shenzhen) Co.,Ltd.
http://www.waltek.com.cn
Reference No.: WTS18S05112117W
5.1
5.2
Page 7 of 57
General Information
General Description of E.U.T.
Product:
HOME STEREO SYSTEM
Model(s):
HF8651KBU-H639, IQ-1565BT
Bluetooth Version:
Bluetooth v3.0+EDR
The Lowest Oscillator:
32.768kHz
Details of E.U.T.
Operation Frequency:
2402~2480MHz
Max. RF output power:
1.28dBm
Type of Modulation:
GFSK, Pi/4 DQPSK, 8DPSK
Antenna installation:
PCB printed antenna
Antenna Gain:
0dBi
Ratings:
Input: AC 120V, 60Hz
Waltek Services (Shenzhen) Co.,Ltd.
http://www.waltek.com.cn
Reference No.: WTS18S05112117W
Page 8 of 57
Channel List
5.3
Normal
Channel
No.
Frequency
(MHz)
2402
Channel
No.
Frequency
(MHz)
2403
Channel
No.
Frequency
(MHz)
2404
Channel
No.
Frequency
(MHz)
2405
2406
2407
2408
2409
2410
2411
10
2412
11
2413
12
2414
13
2415
14
2416
15
2417
16
2418
17
2419
18
2420
19
2421
20
2422
21
2423
22
2424
23
2425
24
2426
25
2427
26
2428
27
2429
28
2430
29
2431
30
2432
31
2433
32
2434
33
2435
34
2436
35
2437
36
2438
37
2439
38
2440
39
2441
40
2442
41
2443
42
2444
43
2445
44
2446
45
2447
46
2448
47
2449
48
2450
49
2451
50
2452
51
2453
52
2454
53
2455
54
2456
55
2457
56
2458
57
2459
58
2460
59
2461
60
2462
61
2463
62
2464
63
2465
64
2466
65
2467
66
2468
67
2469
68
2470
69
2471
70
2472
71
2473
72
2474
73
2475
74
2476
75
2477
76
2478
77
2479
78
2480
5.4
Test Mode
All test mode(s) and condition(s) mentioned were considered and evaluated respectively by
performing full tests; the worst data were recorded and reported.
Test mode
Low channel
Middle channel
High channel
Transmitting
2402MHz
2441MHz
2480MHz
Waltek Services (Shenzhen) Co.,Ltd.
http://www.waltek.com.cn
Reference No.: WTS18S05112117W
Page 9 of 57
Test Summary
Test Items
Test Requirement
Result
15.205(a)
Radiated Spurious Emissions
15.209
PASS
15.247(d)
Conducted Spurious emissions
Band edge
15.247(d)
15.247(d)
15.205(a)
PASS
PASS
Conducted Emission
15.207
PASS
20dB Bandwidth
15.247(a)(1)
PASS
Maximum Peak Output Power
15.247(b)(1)
PASS
Frequency Separation
15.247(a)(1)
PASS
Number of Hopping Frequency
15.247(a)(1)(iii)
PASS
Dwell time
15.247(a)(1)(iii)
PASS
Antenna Requirement
15.203
Complies
1.1307(b)(1)
PASS
Maximum Permissible Exposure
(Exposure of Humans to RF Fields)
Waltek Services (Shenzhen) Co.,Ltd.
http://www.waltek.com.cn
Reference No.: WTS18S05112117W
Page 10 of 57
Equipment Used during Test
7.1
Equipments List
Conducted Emissions Test Site
Item
Equipment
Manufacturer
Model No.
Serial No.
Last
Calibration
Date
Calibration
Due Date
1.
EMI Test Receiver
R&S
ESCI
101155
2017-09-12
2018-09-11
2.
LISN
SCHWARZBECK
NSLK 8128
8128-289
2017-09-12
2018-09-11
2017-09-12
2018-09-11
3.
Limiter
York
MTS-IMP-136
261115-0010024
4.
Cable
LARGE
RF300
2017-09-12
2018-09-11
3m Semi-anechoic Chamber for Radiation Emissions Test site
Item
Equipment
Manufacturer
Model No.
Serial No.
Last
Calibration
Date
Calibration
Due Date
Spectrum Analyzer
R&S
FSP30
100091
2018-04-29
2019-04-28
SCHWARZBECK
BBHA 9120 D
667
2018-04-09
2019-04-08
COMPLIANCE
DIRECTION
PAP-1G18
2004
2018-04-13
2019-04-12
Top
1GHz-18GHz
EW02014-7
2018-04-13
2019-04-12
R&S
FSP40
100501
2017-10-20
2018-10-19
SCHWARZBECK
BBHA 9170
335
2017-09-14
2018-09-13
SCHWARZBECK
BBV 9721
100472
2017-10-25
2018-10-24
Top
18GHz-40GHz
2017-10-25
2018-10-24
Broad-band Horn
Antenna
Broadband
Preamplifier
Coaxial Cable
(above 1GHz)
Spectrum Analyzer
Broad-band Horn
Antenna
Microwave
Broadband
Preamplifier
Cable
3m Semi-anechoic Chamber for Radiation Emissions Test site
Item
Equipment
Manufacturer
Model No.
Serial No
R&S
Beijing Dazhi
ESCI
ZN30900A
101296
SCHWARZBECK
VULB9160
9160-3325
2018-04-08
2019-04-07
Test Receiver
Ative Loop Antenna
Trilog Broadband
Antenna
Amplifier
Last
Calibration
Date
2018-04-13
2017-10-17
ANRITSU
MH648A
M43381
2018-04-13
2019-04-12
Cable
HUBER+SUHNER
CBL2
525178
2018-04-13
2019-04-12
Coaxial Cable
(below 1GHz)
Top
TYPE16(13M)
2017-09-12
2018-09-11
Calibration
Due Date
2019-04-12
2018-10-16
RF Conducted Testing
Item
Equipment
Manufacturer
Model No.
Serial No.
Last
Calibration
Date
Calibration
Due Date
1.
EMC Analyzer
Agilent
E7405A
MY45114943
2017-09-14
2018-09-13
Waltek Services (Shenzhen) Co.,Ltd.
http://www.waltek.com.cn
Reference No.: WTS18S05112117W
Page 11 of 57
(9k~26.5GHz)
2.
Spectrum Analyzer
(9k-6GHz)
Signal Analyzer
3.
(9k~26.5GHz)
Coaxial Cable
4.
5.
(10Hz-30GHz)
Antenna Connector*
R&S
FSL6
100959
2017-09-12
2018-09-11
Agilent
N9010A
MY50520207
2017-09-12
2018-09-11
2017-09-12
2018-09-11
2017-09-12
2018-09-11
“*”: The temporary antenna connector is soldered on the PCB board in order to perform conducted tests and
this temporary antenna connector is listed in the equipment list.
7.2
Description of Support Units
Equipment
Manufacturer
Model No.
Series No.
7.3 Measurement Uncertainty
Parameter
Uncertainty
Conducted Emission
± 3.64 dB(AC mains 150KHz~30MHz)
± 5.08 dB (Bilog antenna 30M~1000MHz)
Radiated Spurious Emissions
± 4.99 dB (Horn antenna 1000M~25000MHz)
Radio Frequency
± 1 x 10-7Hz
RF Power
± 0.42 dB
Dwell time
1.0%
Conducted Spurious Emissions
± 2.76 dB (9kHz~26500MHz)
Confidence interval:95%. Confidence factor:k=2
7.4 Test Equipment Calibration
All the test equipments used are valid and calibrated by CEPREI Certification Body that
address is No.110 Dongguan Zhuang RD. Guangzhou, P.R.China.
Waltek Services (Shenzhen) Co.,Ltd.
http://www.waltek.com.cn
Reference No.: WTS18S05112117W
Page 12 of 57
Conducted Emission
Test Requirement:
FCC CFR 47 Part 15 Section 15.207
Test Method:
ANSI C63.10:2013
Test Result:
PASS
Frequency Range:
150kHz to 30MHz
Class/Severity:
Class B
Frequency (MHz)
Limit:
0.15 to 0.5
0.5 to 5
5 to 30
8.1
Limit (dBμV)
Quasi-peak
Average
66 to 56*
56 to 46*
56
46
60
50
E.U.T. Operation
Operating Environment :
Temperature:
22.8 °C
Humidity:
52.6 % RH
Atmospheric Pressure:
101.2kPa
EUT Operation :
The test was performed in TX Transmitting mode, the test data were shown in the report.
8.2
EUT Setup
The conducted emission tests were performed using the setup accordance with the ANSI C63.10: 2013.
0.4m
EUT
Receiver
PC System
0.8m
0.8m
LISN
:50Ω Terminator
8.3
Measurement Description
The maximised peak emissions from the EUT was scanned and measured for both the Live and
Neutral Lines. Quasi-peak & average measurements were performed if peak emissions were within
6dB of the average limit line.
Waltek Services (Shenzhen) Co.,Ltd.
http://www.waltek.com.cn
Reference No.: WTS18S05112117W
8.4
Page 13 of 57
Conducted Emission Test Result
Remark: only the worst data (GFSK modulation Low channel mode) were reported
Live line:
Waltek Services (Shenzhen) Co.,Ltd.
http://www.waltek.com.cn
Reference No.: WTS18S05112117W
Neutral line:
Waltek Services (Shenzhen) Co.,Ltd.
http://www.waltek.com.cn
Page 14 of 57
Reference No.: WTS18S05112117W
Page 15 of 57
Radiated Spurious Emissions
Test Requirement:
FCC CFR47 Part 15 Section 15.205 &15.209 & 15.247
Test Method:
ANSI C63.10: 2013
Test Result:
PASS
Measurement Distance:
3m
Limit:
Field Strength
Field Strength Limit at 3m Measurement Dist
Frequency
(MHz)
9.1
Distance
uV/m
(m)
uV/m
dBuV/m
0.009 ~ 0.490
2400/F(kHz)
300
10000 * 2400/F(kHz)
20log(2400/F(kHz)) + 80
0.490 ~ 1.705
24000/F(kHz)
30
100 * 24000/F(kHz)
20log(24000/F(kHz)) + 40
1.705 ~ 30
30
30
100 * 30
20log(30) + 40
30 ~ 88
100
100
20log(100)
88 ~ 216
150
150
20log(150)
216 ~ 960
200
200
20log(200)
Above 960
500
500
20log(500)
EUT Operation
Operating Environment :
Temperature:
23.5 °C
Humidity:
51.1 % RH
Atmospheric Pressure:
101.2kPa
EUT Operation :
The test was performed in TX Transmitting mode, the test data were shown in the report.
Waltek Services (Shenzhen) Co.,Ltd.
http://www.waltek.com.cn
Reference No.: WTS18S05112117W
9.2
Page 16 of 57
Test Setup
The radiated emission tests were performed in the 3m Semi- Anechoic Chamber test site, using the
setup accordance with the ANSI C63.10: 2013.
The test setup for emission measurement below 30MHz.
Semi-anechoic 3m Chamber
Turn Table From 0°to 360°
3m
EUT
0.8m
Turn Table
PC
System
Spectrum
Analyzer
AMP
Combining
Network
The test setup for emission measurement from 30 MHz to 1 GHz.
Semi-anechoic 3m Chamber
Antenna Elevation Varies From 1 to 4 m
Turn Table From 0°to 360°
3m
EUT
0.8m
Turn Table
PC
System
Waltek Services (Shenzhen) Co.,Ltd.
http://www.waltek.com.cn
Spectrum
Analyzer
AMP
Combining
Network
Reference No.: WTS18S05112117W
Page 17 of 57
The test setup for emission measurement above 1 GHz.
Anechoic 3m Chamber
bore-sight antenna
Antenna Elevation Varies From 1 to 4 m
Turn Table From 0°to 360°
3m
EUT
1.5m
Turn Table
PC
System
9.3
Absorbers
Spectrum
Analyzer
AMP
Spectrum Analyzer Setup
Below 30MHz
Sweep Speed .............................................. Auto
IF Bandwidth ................................................ 10kHz
Video Bandwidth.......................................... 10kHz
Resolution Bandwidth.................................. 10kHz
30MHz ~ 1GHz
Sweep Speed .............................................. Auto
Detector ....................................................... PK
Resolution Bandwidth .................................. 100kHz
Video Bandwidth.......................................... 300kHz
Above 1GHz
Sweep Speed .............................................. Auto
Detector ....................................................... PK
Resolution Bandwidth .................................. 1MHz
Video Bandwidth.......................................... 3MHz
Detector ....................................................... Ave.
Resolution Bandwidth .................................. 1MHz
Video Bandwidth.......................................... 10Hz
Waltek Services (Shenzhen) Co.,Ltd.
http://www.waltek.com.cn
Combining
Network
Reference No.: WTS18S05112117W
9.4
Page 18 of 57
Test Procedure
1. The EUT is placed on a turntable, which is 0.8m above ground plane for below 1GHz and 1.5m for
above 1GHz.
2. The turntable shall be rotated for 360 degrees to determine the position of maximum emission level.
3. EUT is set 3m away from the receiving antenna, which is moved from 1m to 4m to find out the
maximum emissions. The spectrum was investigated from the lowest radio frequency signal
generated in the device, without going below 9 kHz, up to the tenth harmonic of the highest
fundamental frequency or to 40 GHz, whichever is lower.
4. Maximum procedure was performed on the six highest emissions to ensure EUT compliance.
5. And also, each emission was to be maximized by changing the polarization of receiving antenna
both horizontal and vertical.
6. Repeat above procedures until the measurements for all frequencies are complete.
7. The radiation measurements are tested under 3-axes(X,Y,Z) position(X denotes lying on the table,
Y denotes side stand and Z denotes vertical stand), After pre-test, It was found that the worse
radiation emission was get at the Z position. So the data shown was the Z position only.
9.5
Corrected Amplitude & Margin Calculation
The Corrected Amplitude is calculated by adding the Antenna Factor and Cable Factor, and
subtracting the Amplifier Gain from the Amplitude reading. The basic equation is as follows:
Corr. Ampl. = Indicated Reading + Antenna Factor + Cable Factor - Amplifier Gain
The “Margin” column of the following data tables indicates the degree of compliance with the
applicable limit. For example, a margin of -7dB means the emission is 7dB below the maximum limit
for Class B. The equation for margin calculation is as follows:
Margin = Corr. Ampl. – Limit
Waltek Services (Shenzhen) Co.,Ltd.
http://www.waltek.com.cn
Reference No.: WTS18S05112117W
Page 19 of 57
Summary of Test Results
9.6
Test Frequency: 9 KHz~30 MHz
The measurements were more than 20 dB below the limit and not reported.
Test Frequency: 30MHz ~ 18GHz
Remark: only the worst data (GFSK modulation mode) were reported.
Frequency
(MHz)
Receiver
Reading
(dBμV)
Turn
Detector
(PK/QP/Ave)
RX Antenna
table
Angle
Height
Polar
Degree
(m)
(H/V)
Corrected
Corrected
Factor
Amplitude
(dB)
Limit
Margin
(dBμV/m)
(dBμV/m)
(dB)
GFSK Low Channel
265.45
37.46
QP
210
1.9
-13.35
24.11
46.00
-21.89
265.45
41.77
QP
19
1.6
-13.35
28.42
46.00
-17.58
4804.00
46.13
PK
13
1.7
-1.06
45.07
74.00
-28.93
4804.00
46.37
Ave
13
1.7
-1.06
45.31
54.00
-8.69
7206.00
42.70
PK
53
1.8
1.33
44.03
74.00
-29.97
7206.00
37.54
Ave
53
1.8
1.33
38.87
54.00
-15.13
2324.45
46.02
PK
179
1.6
-13.19
32.83
74.00
-41.17
2324.45
39.66
Ave
179
1.6
-13.19
26.47
54.00
-27.53
2361.22
43.82
PK
17
1.3
-13.14
30.68
74.00
-43.32
2361.22
38.68
Ave
17
1.3
-13.14
25.54
54.00
-28.46
2497.65
44.76
PK
169
1.9
-13.08
31.68
74.00
-42.32
2497.65
37.16
Ave
169
1.9
-13.08
24.08
54.00
-29.92
Waltek Services (Shenzhen) Co.,Ltd.
http://www.waltek.com.cn
Reference No.: WTS18S05112117W
Frequency
(MHz)
Receiver
Reading
(dBμV)
Page 20 of 57
Turn
Detector
(PK/QP/Ave)
RX Antenna
table
Angle
Height
Polar
Degree
(m)
(H/V)
Corrected
Corrected
Factor
Amplitude
(dB)
Limit
Margin
(dBμV/m)
(dBμV/m)
(dB)
GFSK Middle Channel
265.45
36.25
QP
73
1.1
-13.35
22.90
46.00
-23.10
265.45
40.51
QP
319
1.5
-13.35
27.16
46.00
-18.84
4882.00
48.94
PK
233
2.0
-0.62
48.32
74.00
-25.68
4882.00
44.18
Ave
233
2.0
-0.62
43.56
54.00
-10.44
7323.00
42.94
PK
204
1.6
2.21
45.15
74.00
-28.85
7323.00
36.89
Ave
204
1.6
2.21
39.10
54.00
-14.90
2340.33
45.80
PK
182
1.8
-13.19
32.61
74.00
-41.39
2340.33
38.54
Ave
182
1.8
-13.19
25.35
54.00
-28.65
2376.46
44.15
PK
207
1.7
-13.14
31.01
74.00
-42.99
2376.46
37.61
Ave
207
1.7
-13.14
24.47
54.00
-29.53
2494.47
43.55
PK
214
1.7
-13.08
30.47
74.00
-43.53
2494.47
36.61
Ave
214
1.7
-13.08
23.53
54.00
-30.47
Waltek Services (Shenzhen) Co.,Ltd.
http://www.waltek.com.cn
Reference No.: WTS18S05112117W
Frequency
(MHz)
Receiver
Reading
(dBμV)
Page 21 of 57
Turn
Detector
(PK/QP/Ave)
RX Antenna
table
Angle
Height
Polar
Degree
(m)
(H/V)
Corrected
Corrected
Factor
Amplitude
(dB)
Limit
Margin
(dBμV/m)
(dBμV/m)
(dB)
GFSK High Channel
265.45
36.78
QP
346
1.6
-13.35
23.43
46.00
-22.57
265.45
40.84
QP
138
2.0
-13.35
27.49
46.00
-18.51
4960.00
48.47
PK
320
1.7
-0.24
48.23
74.00
-25.77
4960.00
45.76
Ave
320
1.7
-0.24
45.52
54.00
-8.48
7440.00
41.69
PK
195
1.7
2.84
44.53
74.00
-29.47
7440.00
36.75
Ave
195
1.7
2.84
39.59
54.00
-14.41
2327.52
46.60
PK
11
1.3
-13.19
33.41
74.00
-40.59
2327.52
39.10
Ave
11
1.3
-13.19
25.91
54.00
-28.09
2367.82
43.15
PK
294
1.4
-13.14
30.01
74.00
-43.99
2367.82
37.14
Ave
294
1.4
-13.14
24.00
54.00
-30.00
2489.42
42.54
PK
177
1.2
-13.08
29.46
74.00
-44.54
2489.42
38.41
Ave
177
1.2
-13.08
25.33
54.00
-28.67
Test Frequency: 18GHz~25GHz
The measurements were more than 20 dB below the limit and not recorded
Waltek Services (Shenzhen) Co.,Ltd.
http://www.waltek.com.cn
Reference No.: WTS18S05112117W
10
Page 22 of 57
Band Edge Measurement
Test Requirement:
Section 15.247(d) In addition, radiated emissions which fall in the
restricted bands. as defined in Section 15.205(a), must also comply
with the radiated emission limits specified in Section 15.209(a) (see
Section 15.205(c)).
Test Method:
ANSI C63.10: 2013
Test Limit:
Regulation 15.247 (d),In any 100 kHz bandwidth outside the
frequency band in which the
spread spectrum or digitally
modulated intentional radiator is operating, the radio frequency
power that is produced by the intentional radiator shall be at least 20
dB below that in the 100 kHz bandwidth within the band that contains
the highest level of the desired power, based on either an RF
conducted or a radiated measurement, provided the transmitter
demonstrates compliance with the peak conducted power limits. If
the transmitter complies with the conducted power limits based on
the use of RMS averaging over a time interval, as permitted under
paragraph (b)(3) of this section, the attenuation required under this
paragraph shall be 30 dB instead of 20 dB. Attenuation below the
general limits specified in §15.209(a) is not required. In addition,
radiated emissions which fall in the restricted bands, as defined in
§15.205(a), must also comply with the radiated emission limits
specified in §15.209(a) (see §15.205(c)).
Test Mode:
Transmitting
10.1 Test Procedure
1. Remove the antenna from the EUT and then connect a low RF cable from the antenna port to the
spectrum;
2. Set the spectrum analyzer: RBW = 100kHz, VBW = 300kHz, Sweep = auto
Detector function = peak, Trace = max hold
Waltek Services (Shenzhen) Co.,Ltd.
http://www.waltek.com.cn
Reference No.: WTS18S05112117W
Page 23 of 57
10.2 Test Result
GFSK Transmitting Band edge-left side
GFSK Hopping Band edge-left side
Waltek Services (Shenzhen) Co.,Ltd.
http://www.waltek.com.cn
Reference No.: WTS18S05112117W
Page 24 of 57
GFSK Transmitting Band edge-right side
GFSK Hopping Band edge-right side
Waltek Services (Shenzhen) Co.,Ltd.
http://www.waltek.com.cn
Reference No.: WTS18S05112117W
Page 25 of 57
Pi/4 DQPSK Transmitting Band edge-left side
Pi/4 DQPSK Hopping Band edge-left side
Waltek Services (Shenzhen) Co.,Ltd.
http://www.waltek.com.cn
Reference No.: WTS18S05112117W
Page 26 of 57
Pi/4 DQPSK Transmitting Band edge-right side
Pi/4 DQPSK Hopping Band edge-right side
Waltek Services (Shenzhen) Co.,Ltd.
http://www.waltek.com.cn
Reference No.: WTS18S05112117W
Page 27 of 57
8DPSK Transmitting Band edge-left side
8DPSK Hopping Band edge-left side
Waltek Services (Shenzhen) Co.,Ltd.
http://www.waltek.com.cn
Reference No.: WTS18S05112117W
Page 28 of 57
8DPSK Transmitting Band edge-right side
8DPSK Hopping Band edge-right side
Waltek Services (Shenzhen) Co.,Ltd.
http://www.waltek.com.cn
Reference No.: WTS18S05112117W
11
Page 29 of 57
20 dB Bandwidth Measurement
Test Requirement:
FCC CFR47 Part 15 Section 15.247
Test Method:
ANSI C63.10: 2013
Test Mode:
Test in fixing operating frequency at low, Middle, high channel.
11.1 Test Procedure
1. Remove the antenna from the EUT and then connect a low RF cable from the antenna port to the
spectrum;
2. Set the spectrum analyzer: RBW = 30kHz, VBW = 100kHz
11.2 Test Result
Modulation
Test Channel
Bandwidth(MHz)
GFSK
Low
0.964
GFSK
Middle
0.964
GFSK
High
0.964
Pi/4 DQPSK
Low
1.299
Pi/4 DQPSK
Middle
1.281
Pi/4 DQPSK
High
1.287
8DPSK
Low
1.275
8DPSK
Middle
1.275
8DPSK
High
1.293
Waltek Services (Shenzhen) Co.,Ltd.
http://www.waltek.com.cn
Reference No.: WTS18S05112117W
Page 30 of 57
Test plots
GFSK Low Channel
GFSK Middle Channel
Waltek Services (Shenzhen) Co.,Ltd.
http://www.waltek.com.cn
Reference No.: WTS18S05112117W
Page 31 of 57
GFSK High Channel
Pi/4 DQPSK Low Channel
Waltek Services (Shenzhen) Co.,Ltd.
http://www.waltek.com.cn
Reference No.: WTS18S05112117W
Page 32 of 57
Pi/4 DQPSK Middle Channel
Pi/4 DQPSK High Channel
Waltek Services (Shenzhen) Co.,Ltd.
http://www.waltek.com.cn
Reference No.: WTS18S05112117W
Page 33 of 57
8DPSK Low Channel
8DPSK Middle Channel
Waltek Services (Shenzhen) Co.,Ltd.
http://www.waltek.com.cn
Reference No.: WTS18S05112117W
Page 34 of 57
8DPSK High Channel
Waltek Services (Shenzhen) Co.,Ltd.
http://www.waltek.com.cn
Reference No.: WTS18S05112117W
12
Page 35 of 57
Maximum Peak Output Power
Test Requirement:
FCC CFR47 Part 15 Section 15.247
Test Method:
ANSI C63.10: 2013
Test Limit:
Regulation 15.247 (a)(1), For frequency hopping systems
operating in the 2400-2483.5 MHz band by a minimum of 25
kHz or the 20 dB bandwidth of the hopping channel, whichever
is greater.: 1 watt. For all other frequency hopping systems in
the 2400-2483.5 MHz band that are separated by 25 kHz or
two-thirds of the 20 dB bandwidth of the hopping channel,
whichever is greater: 0.125 watts..
Test mode:
Test in fixing frequency transmitting mode.
12.1 Test Procedure
1. Remove the antenna from the EUT and then connect a low RF cable from the antenna port to the
spectrum.
2. Set the spectrum analyzer: RBW = 3MHz. VBW = 10MHz. Sweep = auto; Detector Function = Peak.
3. Keep the EUT in transmitting at lowest, medium and highest channel individually. Record the max
value.
12.2 Test Result
Output Power
Modulation
Test Channel
GFSK
Low
1.28
30
GFSK
Middle
0.69
30
GFSK
High
-0.90
30
Pi/4 DQPSK
Low
1.07
21
Pi/4 DQPSK
Middle
0.19
21
Pi/4 DQPSK
High
-1.22
21
8DPSK
Low
1.26
21
8DPSK
Middle
0.41
21
8DPSK
High
-1.01
21
Waltek Services (Shenzhen) Co.,Ltd.
http://www.waltek.com.cn
(dBm)
Limit (dBm)
Reference No.: WTS18S05112117W
Page 36 of 57
Test plots
GFSK Low Channel
GFSK Middle Channel
Waltek Services (Shenzhen) Co.,Ltd.
http://www.waltek.com.cn
Reference No.: WTS18S05112117W
Page 37 of 57
GFSK High Channel
Pi/4 DQPSK Low Channel
Waltek Services (Shenzhen) Co.,Ltd.
http://www.waltek.com.cn
Reference No.: WTS18S05112117W
Page 38 of 57
Pi/4 DQPSK Middle Channel
Pi/4 DQPSK High Channel
Waltek Services (Shenzhen) Co.,Ltd.
http://www.waltek.com.cn
Reference No.: WTS18S05112117W
Page 39 of 57
8DPSK Low Channel
8DPSK Middle Channel
Waltek Services (Shenzhen) Co.,Ltd.
http://www.waltek.com.cn
Reference No.: WTS18S05112117W
Page 40 of 57
8DPSK High Channel
Waltek Services (Shenzhen) Co.,Ltd.
http://www.waltek.com.cn
Reference No.: WTS18S05112117W
13
Page 41 of 57
Hopping Channel Separation
Test Requirement:
FCC CFR47 Part 15 Section 15.247
Test Method:
ANSI C63.10: 2013
Test Limit:
Regulation 15.247(a)(1) Frequency hopping systems shall have
hopping channel carrier frequencies separated by a minimum of 25
kHz or the 20 dB bandwidth of the hopping channel, whichever is
greater. Alternatively, frequency hopping systems operating in the
2400-2483.5
MHz
band
may
have
hopping
channel
carrier
frequencies that are separated by 25 kHz or two-thirds of the 20 dB
bandwidth of the hopping channel, whichever is greater, provided the
systems operate with an output power no greater than 0.125W.
Test Mode:
Test in hopping transmitting operating mode.
13.1 Test Procedure
1. Remove the antenna from the EUT and then connect a low RF cable from the antenna port
to the spectrum.
2. Set the spectrum analyzer: RBW = 30kHz. VBW = 100kHz , Span = 3.0MHz. Sweep = auto;
Detector Function = Peak. Trace = Max hold.
3. Allow the trace to stabilize. Use the marker-delta function to determine the separation between the
peaks of the adjacent channels. The limit is specified in one of the subparagraphs of this Section
Submit this plot.
13.2 Test Result
Modulation
Test Channel
GFSK
Low
GFSK
Separation
Limit(MHz)
Result
1.000
0.643
PASS
Middle
1.000
0.643
PASS
GFSK
High
1.000
0.643
PASS
Pi/4 DQPSK
Low
1.000
0.866
PASS
Pi/4 DQPSK
Middle
1.000
0.854
PASS
Pi/4 DQPSK
High
1.000
0.858
PASS
8DPSK
Low
1.000
0.850
PASS
8DPSK
Middle
1.000
0.850
PASS
8DPSK
High
1.000
0.862
PASS
Waltek Services (Shenzhen) Co.,Ltd.
http://www.waltek.com.cn
(MHz)
Reference No.: WTS18S05112117W
Page 42 of 57
Test plots
GFSK Low Channel
GFSK Middle Channel
Waltek Services (Shenzhen) Co.,Ltd.
http://www.waltek.com.cn
Reference No.: WTS18S05112117W
Page 43 of 57
GFSK High Channel
Pi/4 DQPSK Low Channel
Waltek Services (Shenzhen) Co.,Ltd.
http://www.waltek.com.cn
Reference No.: WTS18S05112117W
Page 44 of 57
Pi/4 DQPSK Middle Channel
Pi/4 DQPSK High Channel
Waltek Services (Shenzhen) Co.,Ltd.
http://www.waltek.com.cn
Reference No.: WTS18S05112117W
Page 45 of 57
8DPSK Low Channel
8DPSK Middle Channel
Waltek Services (Shenzhen) Co.,Ltd.
http://www.waltek.com.cn
Reference No.: WTS18S05112117W
Page 46 of 57
8DPSK High Channel
Waltek Services (Shenzhen) Co.,Ltd.
http://www.waltek.com.cn
Reference No.: WTS18S05112117W
14
Page 47 of 57
Number of Hopping Frequency
Test Requirement:
FCC CFR47 Part 15 Section 15.247
Test Method:
ANSI C63.10: 2013
Test Limit:
Regulation 15.247 (a)(1)(iii) Frequency hopping systems in the
2400-2483.5 MHz band shall use at least 15 channels.
Test Mode:
Test in hopping transmitting operating mode.
14.1 Test Procedure
1. Remove the antenna from the EUT and then connect a low RF cable from the antenna port to the
spectrum.
2. Set the spectrum analyzer: RBW = 100kHz. VBW = 300kHz. Sweep = auto; Detector Function =
Peak. Trace = Max hold.
3. Allow the trace to stabilize. It may prove necessary to break the span up to sections. in order to
clearly show all of the hopping frequencies. The limit is specified in one of the subparagraphs of
this Section.
4. Set the spectrum analyzer: Start Frequency = 2.4GHz, Stop Frequency = 2.4835GHz. Sweep=auto;
14.2 Test Result
Test Plots:
79 Channels in total
GFSK
Waltek Services (Shenzhen) Co.,Ltd.
http://www.waltek.com.cn
Reference No.: WTS18S05112117W
Page 48 of 57
Pi/4 DQPSK
8DPSK
Waltek Services (Shenzhen) Co.,Ltd.
http://www.waltek.com.cn
Reference No.: WTS18S05112117W
15
Page 49 of 57
Dwell Time
Test Requirement:
FCC CFR47 Part 15 Section 15.247
Test Method:
ANSI C63.10: 2013
Test Limit:
Regulation 15.247(a)(1)(iii) Frequency hopping systems in
the 2400-2483.5 MHz band shall use at least 15 channels. The
average time of occupancy on any channel shall not be greater
than 0.4 seconds within a period of 0.4 seconds multiplied by
the number of hopping channels employed. Frequency hopping
systems may avoid or suppress transmissions on a particular
hopping frequency provided that a minimum of 15 channels are
used.
Test Mode:
Test in hopping transmitting operating mode.
15.1 Test Procedure
1. Remove the antenna from the EUT and then connect a low RF cable from the antenna port to the
spectrum.
2. Set spectrum analyzer span = 0. Centred on a hopping channel;
3. Set RBW = 1MHz and VBW = 3MHz.Sweep = as necessary to capture the entire dwell time per
hopping channel. Set the EUT for DH5, DH3 and DH1 packet transmitting.
4. Use the marker-delta function to determine the dwell time. If this value varies with different modes of
operation (e.g.. data rate. modulation format. etc.). repeat this test for each variation. The limit is
specified in one of the subparagraphs of this Section. Submit this plot(s).
15.2 Test Result
DH5 Packet permit maximum 1600 / 79 / 6 hops per second in each channel (5 time slots RX, 1 time
slot TX).
DH3 Packet permit maximum 1600 / 79 / 4 hops per second in each channel (3 time slots RX, 1 time
slot TX).
DH1 Packet permit maximum 1600 / 79 /2 hops per second in each channel (1 time slot RX, 1 time slot
TX). So, the Dwell Time can be calculated as follows:
Data Packet
Dwell Time(s)
DH5
1600/79/6*0.4*79*(MkrDelta)/1000
DH3
1600/79/4*0.4*79*(MkrDelta)/1000
DH1
1600/79/2*0.4*79*(MkrDelta)/1000
Remark: Mkr Delta is once pulse time.
Waltek Services (Shenzhen) Co.,Ltd.
http://www.waltek.com.cn
Reference No.: WTS18S05112117W
Modulation
GFSK
Pi/4DQPSK
8DPSK
Data Packet
DH5
DH5
DH5
Page 50 of 57
Channel
pulse
time(ms)
Dwell
Time(s)
Limits(s)
Low
2.882
0.307
0.4
middle
2.882
0.307
0.4
High
2.882
0.307
0.4
Low
2.890
0.308
0.4
middle
2.890
0.308
0.4
High
2.890
0.308
0.4
Low
2.890
0.308
0.4
middle
2.890
0.308
0.4
High
2.890
0.308
0.4
Remark: Only the worst-case mode DH5 is recorded.
Test Plots
GFSK DH5 Low Channel
Waltek Services (Shenzhen) Co.,Ltd.
http://www.waltek.com.cn
Reference No.: WTS18S05112117W
Page 51 of 57
GFSK DH5 Middle Channel
GFSK DH5 High Channel
Waltek Services (Shenzhen) Co.,Ltd.
http://www.waltek.com.cn
Reference No.: WTS18S05112117W
Page 52 of 57
Pi/4DQPSK DH5 Low Channel
Pi/4DQPSK DH5 Middle Channel
Waltek Services (Shenzhen) Co.,Ltd.
http://www.waltek.com.cn
Reference No.: WTS18S05112117W
Page 53 of 57
Pi/4DQPSK DH5 High Channel
8DPSK DH5 Low Channel
Waltek Services (Shenzhen) Co.,Ltd.
http://www.waltek.com.cn
Reference No.: WTS18S05112117W
Page 54 of 57
8DPSK DH5 Middle Channel
8DPSK DH5 High Channel
Waltek Services (Shenzhen) Co.,Ltd.
http://www.waltek.com.cn
Reference No.: WTS18S05112117W
16
Page 55 of 57
Antenna Requirement
An intentional radiator shall be designed to ensure that no antenna other than that furnished by the
responsible party shall be used with the device. The use of a permanently attached antenna or of an
antenna that uses a unique coupling to the intentional radiator shall be considered sufficient to comply
with the provisions of this section. The manufacturer may design the unit so that a broken antenna can
be replaced by the user, but the use of a standard antenna jack or electrical connector is prohibited.
This requirement does not apply to carrier current devices or to devices operated under the provisions
of §15.211, §15.213, §15.217, §15.219, or §15.221. Further, this requirement does not apply to
intentional radiators that must be professionally installed, such as perimeter protection systems and
some field disturbance sensors, or to other intentional radiators which, in accordance with §15.31(d),
must be measured at the installation site. However, the installer shall be responsible for ensuring that
the proper antenna is employed so that the limits in this part are not exceeded.
For intentional device, according to FCC 47 CFR Section 15.203, an intentional radiator shall be
designed to ensure that no antenna other than that furnished by the responsible party shall be used
with the device.
Result:
The EUT has a PCB Printed Antenna, meets the requirements of FCC 15.203.
Waltek Services (Shenzhen) Co.,Ltd.
http://www.waltek.com.cn
Reference No.: WTS18S05112117W
17
Page 56 of 57
RF Exposure
Test Requirement: FCC Part 1.1307
Evaluation Method:
FCC Part2.1093 & KDB 447498 D01 General RF Exposure Guidance v06
17.1 Requirements
1) The 1-g and 10-g SAR test exclusion thresholds for 100 MHz to 6 GHz at test separation distances
≤50 mm are determined by:
[(max. power of channel, including tune-up tolerance, mW)/(min. test separation distance, mm)] · [√
f(GHz)] ≤3.0 for 1-g SAR and ≤7.5 for 10-g extremity SAR where
1.
f(GHz) is the RF channel transmit frequency in GHz
2.
Power and distance are rounded to the nearest mW and mm before calculation
3.
The result is rounded to one decimal place for comparison
The test exclusions are applicable only when the minimum test separation distance is ≤50 mm and
for transmission frequencies between 100 MHz and 6 GHz. When the minimum test separation
distance is < 5 mm, a distance of 5 mm is applied to determine SAR test exclusion.
Test result
Conduc
Source-based
ted
Conducted
time-averaged
Peak
Peak
maximum
Minimum test
separation distance SAR Test Exclusion
required for the
power( power(mW) conducted output exposure conditions
dBm)
8.14
6.52
power(mW)
(mm)
6.52
Note: No SAR measurement is required.
Waltek Services (Shenzhen) Co.,Ltd.
http://www.waltek.com.cn
Thresholds
Calculation Value
2.04
SAR Test
Exclusion
Thresholds
Result
Limit
3.0
Compliance
Reference No.: WTS18S05112117W
18
Page 57 of 57
Photographs – Test Setup Photos
Refer to the file HF8651KBU-H639_Ext Photos, HF8651KBU-H639_Int Photos and HF8651KBUH639_Tsup Photos.
======End of Report======
Waltek Services (Shenzhen) Co.,Ltd.
http://www.waltek.com.cn
Download: IQ-1565BT HOME STEREO SYSTEM Test Report ce FLYBALL ELECTRONIC (SHENZHEN) CO. LTD
Mirror Download [FCC.gov]IQ-1565BT HOME STEREO SYSTEM Test Report ce FLYBALL ELECTRONIC (SHENZHEN) CO. LTD
Document ID3881417
Application IDFfyV3yjujUjhz6lXEFXswQ==
Document DescriptionTest Report
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeTest Report
Display FormatAdobe Acrobat PDF - pdf
Filesize278.04kB (3475460 bits)
Date Submitted2018-06-08 00:00:00
Date Available2018-06-08 00:00:00
Creation Date2018-06-08 18:57:52
Producing SoftwareAdobe PDF Library 11.0
Document Lastmod2018-06-08 18:58:29
Document TitleTest Report ce
Document CreatorAcrobat PDFMaker 11 Word 版
Document Author: philo zhong

Source Exif Data [exif.tools]:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.6
Linearized                      : No
Author                          : philo zhong
Company                         : waltek
Create Date                     : 2018:06:08 18:57:52+08:00
KSO Product Build Ver           : 2052-8.1.0.3526
Modify Date                     : 2018:06:08 18:58:29+08:00
Source Modified                 : D:20180608105742
Subject                         : CE
Tagged PDF                      : Yes
XMP Toolkit                     : Adobe XMP Core 5.4-c005 78.147326, 2012/08/23-13:03:03
Metadata Date                   : 2018:06:08 18:58:29+08:00
Creator Tool                    : Acrobat PDFMaker 11 Word 版
Document ID                     : uuid:c2007775-0172-454b-8504-dc2531af5366
Instance ID                     : uuid:e66cdcd6-a3ea-4f1d-9ba3-381b7eb570ae
Format                          : application/pdf
Title                           : ce
Description                     : CE
Creator                         : philo zhong
Producer                        : Adobe PDF Library 11.0
Keywords                        : 
Headline                        : CE
Page Layout                     : OneColumn
Page Count                      : 57