FCC ID 2AD3PWIMO

Wireless Display Receiver

by Shenzhen Smallart Technology Co.,Ltd.

Grantee Code: 2AD3P   Product Code: WIMO
Latest application date: 2015-04-02

FCC ID Device Details

FCC ID2AD3PWIMO
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AD3P
Product CodeWIMO
Applicant BusinessShenzhen Smallart Technology Co.,Ltd. 🇨🇳
Related Domains smallart.com.cn
Equipment ClassWireless Display Receiver
Test FirmShenzhen NTEK Testing Technology Co., Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzOriginal Equipment2015-04-02
5180-5240 MHzOriginal Equipment2015-04-02

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2015-04-02PDF 322.1 KB
Internal photoInternal Photos2015-04-02PDF 864.6 KB
Internal photo Metadata onlyExternal Photos2015-04-02PDF 864.6 KB
External photoExternal Photos2015-04-02PDF 335.3 KB
Label and LocationID Label/Location Info2015-04-02PDF 45.5 KB
Test setup photoTest Setup Photos2015-04-02PDF 202.5 KB
Test report_FCC.247-WIFI REV1Test Report2015-04-02PDF 1.2 MB
Test report_FCC.407-WIFI REV1Test Report2015-04-02PDF 1.2 MB
Family models letterCover Letter(s)2015-04-02PDF 13.3 KB
POACover Letter(s)2015-04-02PDF 44.6 KB
SCS-F19 Confidentiality Request Letter _Ver 3.0_Cover Letter(s)2015-04-02PDF 22.5 KB
MPE REV1RF Exposure Info2015-04-02PDF 83.5 KB
Block Digram Metadata onlyBlock DiagramPDF 59.7 KB
Block diagram Metadata onlyBlock DiagramPDF 59.7 KB
SCH Metadata onlySchematicsPDF 305.5 KB
Operational Description Metadata onlyOperational DescriptionPDF 80.5 KB

Application Information

Application IDom0Fp51v5nal0OFSWvMEIQ==
Final Action Date2015-04-02
Application PurposeOriginal Equipment
Applicant FRN0024234163
ModelWIMO
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionWireless Display Receiver
Responsible Partytian linsong, tianlinsong@smallart.com.cn , 13798537293
Test FirmJason Chen, Shenzhen NTEK Testing Technology Co., Ltd., jason.chen@ntek.org.cn , (86)-0755-61156588
TCB EmailTCB@siemic.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower listed is the maximum combined conducted output power. Device is 2X2 MIMO Device contains 20 / 40 MHz signal bandwidth. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
om0Fp51v5nal0OFSWvMEIQ==2015-04-02Original Equipment
VhYUEvf8u+xu2YrQsrwyYQ==2015-04-02Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.0301315CCC, MO
5180-5240 MHz0.027416015ECC, MO
5745-5825 MHz0.02924215CCC, MO

Grants

TCB Grant - Application VhYUEvf8u+xu2YrQsrwyYQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
775 Montague Expressway
Milpitas, CA 95035
Date of Grant: 04/02/2015

Application Dated: 04/01/2015
Shenzhen Smallart Technology Co.,Ltd.
Room 1006, Floor 10, Fangda Building, Keji South
12th Road,High-Tech Park, Nanshan District,
Shenzhen,
China
 
Attention: tian linsong

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AD3PWIMO
Name of Grantee:  Shenzhen Smallart Technology Co.,Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless Display Receiver
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.027416  

Power listed is the maximum combined conducted output power.

Device is 2X2 MIMO

Device contains 20 / 40 MHz signal bandwidth.

This transmitter is restricted to indoor use in the 5150MHz to 5250MHz frequency range.

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application VhYUEvf8u+xu2YrQsrwyYQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Shenzhen Smallart Technology Co.,Ltd.
Room 1006, Floor 10, Fangda Building, Keji South 12th Road,High-Tech Park, Nanshan District,
Shenzhen,
China
  Date of Grant: 04/02/2015

Application Dated: 04/01/2015
 
Attention: tian linsong

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AD3PWIMO
Name of Grantee:  Shenzhen Smallart Technology Co.,Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless Display Receiver
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.027416  

Power listed is the maximum combined conducted output power.

Device is 2X2 MIMO

Device contains 20 / 40 MHz signal bandwidth.

This transmitter is restricted to indoor use in the 5150MHz to 5250MHz frequency range.

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application om0Fp51v5nal0OFSWvMEIQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bureau Veritas Consumer Products Services, Inc.
775 Montague Expressway
Milpitas, CA 95035
Date of Grant: 04/02/2015

Application Dated: 04/01/2015
Shenzhen Smallart Technology Co.,Ltd.
Room 1006, Floor 10, Fangda Building, Keji South
12th Road,High-Tech Park, Nanshan District,
Shenzhen,
China
 
Attention: tian linsong

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AD3PWIMO
Name of Grantee:  Shenzhen Smallart Technology Co.,Ltd.
Equipment Class: Digital Transmission System
Notes: Wireless Display Receiver
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.03013  
CC MO 15C 5745.0  -  5825.0 0.029242  

Power listed is the maximum combined conducted output power.

Device is 2X2 MIMO

Device contains 20 / 40 MHz signal bandwidth.

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application om0Fp51v5nal0OFSWvMEIQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Shenzhen Smallart Technology Co.,Ltd.
Room 1006, Floor 10, Fangda Building, Keji South 12th Road,High-Tech Park, Nanshan District,
Shenzhen,
China
  Date of Grant: 04/02/2015

Application Dated: 04/01/2015
 
Attention: tian linsong

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AD3PWIMO
Name of Grantee:  Shenzhen Smallart Technology Co.,Ltd.
Equipment Class: Digital Transmission System
Notes: Wireless Display Receiver
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.03013  
CC MO 15C 5745.0  -  5825.0 0.029242  

Power listed is the maximum combined conducted output power.

Device is 2X2 MIMO

Device contains 20 / 40 MHz signal bandwidth.

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: