FCC ID 2AD56HLK-LD2410B-P

Radar Module

by Shenzhen Hi-Link Electronic co., Ltd.

Grantee Code: 2AD56   Product Code: HLKLD2410BP
Latest application date: 2023-06-27

FCC ID Device Details

FCC ID2AD56HLK-LD2410B-P
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AD56
Product CodeHLKLD2410BP
Applicant BusinessShenzhen Hi-Link Electronic co., Ltd. 🇨🇳
Equipment ClassRadar Module
Test FirmCHINA CERTIFICATION ICT CO., LTD (DONGGUAN)

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzOriginal Equipment2023-06-27
24010-24245 MHzOriginal Equipment2023-06-27

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2023-06-27PDF 2.2 MB
Internal PhotosInternal Photos2023-06-27PDF 598.3 KB
External PhotosExternal Photos2023-06-27PDF 419.7 KB
Label & Label LocationID Label/Location Info2023-06-27PDF 283.1 KB
Test Setup PhotosTest Setup Photos2023-06-27PDF 498.8 KB
Test Setup PhotosTest Setup Photos2023-06-27PDF 848.8 KB
Antenna SpecificationTest Report2023-06-27PDF 818.4 KB
Test ReportTest Report2023-06-27PDF 630 KB
Test ReportTest Report2023-06-27PDF 524.2 KB
2.911 (d)(5)(i)(ii) Attestation StatementAttestation Statements2023-06-27PDF 136.1 KB
Attestation LetterAttestation Statements2023-06-27PDF 75.6 KB
US Agent Attestation LetterAttestation Statements2023-06-27PDF 266.4 KB
DoS LetterCover Letter(s)2023-06-27PDF 369.1 KB
FCC Agent Authorization LetterCover Letter(s)2023-06-27PDF 43.3 KB
FCC Long-term Confidential RequestCover Letter(s)2023-06-27PDF 114.5 KB
Module Approval LetterCover Letter(s)2023-06-27PDF 627.7 KB
RF ExposureRF Exposure Info2023-06-27PDF 117.8 KB
RF ExposureRF Exposure Info2023-06-27PDF 116.5 KB
Block Diagram Metadata onlyBlock DiagramPDF 175.2 KB
Schematics Metadata onlySchematicsPDF 419.2 KB
Circuit Description Metadata onlyOperational DescriptionPDF 1.5 MB

Application Information

Application IDnwggz89Y5+vbVdnnZtDztw==
Final Action Date2023-06-27
Application PurposeOriginal Equipment
Applicant FRN0024259467
ModelHLK-LD2410B-P
Frequency Range2402-2480 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionRadar Module
Responsible PartyJacky Gong, Manager, qingfeng12g@163.com , (86) 755-23152658
Test FirmTanie Ou, CHINA CERTIFICATION ICT CO., LTD (DONGGUAN), qa@ccttt.com.cn , 0086 0769 86858888
TCB Emailbacl.regulatory@baclcorp.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsModular Approval. Power output listed is conducted. This grant is valid only when the module is sold to OEM or OEM integrator. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. The integrator must be provided with specific information required to satisfy RF exposure compliance for final host devices and installations. Compliance of this device in all final host configurations is the responsibility of the Grantee and may require the submission of a Class II permissive change or new application.

Applications

Application IDDatePurpose
nwggz89Y5+vbVdnnZtDztw==2023-06-27Original Equipment
AoKh6IvH/exrwiuKQhivUA==2023-06-27Original Equipment

Equipment Authorization

FrequencyOutputRules
2402-2480 MHz0.000200015C
24010-24245 MHz15C

Grants

TCB Grant - Application nwggz89Y5+vbVdnnZtDztw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratories Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
Date of Grant: 06/27/2023

Application Dated: 06/27/2023
Shenzhen Hi-Link Electronic co., Ltd.
1705, 1706, 1709A, Building E, Xinghe WORLD,
Minle Community, Minzhi Street, Longhua District
Shenzhen,
China
 
Attention: Jacky Gong , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AD56HLK-LD2410B-P
Name of Grantee:  Shenzhen Hi-Link Electronic co., Ltd.
Equipment Class: Digital Transmission System
Notes: Radar Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.0002  

Modular Approval. Power output listed is conducted. This grant is valid only when the module is sold to OEM or OEM integrator. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. The integrator must be provided with specific information required to satisfy RF exposure compliance for final host devices and installations. Compliance of this device in all final host configurations is the responsibility of the Grantee and may require the submission of a Class II permissive change or new application.

EAS Grant - Application nwggz89Y5+vbVdnnZtDztw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Shenzhen Hi-Link Electronic co., Ltd.
1705, 1706, 1709A, Building E, Xinghe WORLD, Minle Community, Minzhi Street, Longhua District
Shenzhen,
China
  Date of Grant: 06/27/2023

Application Dated: 06/27/2023
 
Attention: Jacky Gong , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AD56HLK-LD2410B-P
Name of Grantee:  Shenzhen Hi-Link Electronic co., Ltd.
Equipment Class: Digital Transmission System
Notes: Radar Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.0002  

Modular Approval. Power output listed is conducted. This grant is valid only when the module is sold to OEM or OEM integrator. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. The integrator must be provided with specific information required to satisfy RF exposure compliance for final host devices and installations. Compliance of this device in all final host configurations is the responsibility of the Grantee and may require the submission of a Class II permissive change or new application.



TCB Grant - Application AoKh6IvH/exrwiuKQhivUA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratories Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
Date of Grant: 06/27/2023

Application Dated: 06/27/2023
Shenzhen Hi-Link Electronic co., Ltd.
1705, 1706, 1709A, Building E, Xinghe WORLD,
Minle Community, Minzhi Street, Longhua District
Shenzhen,
China
 
Attention: Jacky Gong , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AD56HLK-LD2410B-P
Name of Grantee:  Shenzhen Hi-Link Electronic co., Ltd.
Equipment Class: Part 15 Low Power Communication Device Transmitter
Notes: Radar Module
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 24010.0  -  24245.0  

Modular Approval. This grant is valid only when the module is sold to OEM or OEM integrator. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. The integrator must be provided with specific information required to satisfy RF exposure compliance for final host devices and installations. Compliance of this device in all final host configurations is the responsibility of the Grantee and may require the submission of a Class II permissive change or new application.

EAS Grant - Application AoKh6IvH/exrwiuKQhivUA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Shenzhen Hi-Link Electronic co., Ltd.
1705, 1706, 1709A, Building E, Xinghe WORLD, Minle Community, Minzhi Street, Longhua District
Shenzhen,
China
  Date of Grant: 06/27/2023

Application Dated: 06/27/2023
 
Attention: Jacky Gong , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AD56HLK-LD2410B-P
Name of Grantee:  Shenzhen Hi-Link Electronic co., Ltd.
Equipment Class: Part 15 Low Power Communication Device Transmitter
Notes: Radar Module
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 24010.0  -  24245.0  

Modular Approval. This grant is valid only when the module is sold to OEM or OEM integrator. Only the antenna tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. The integrator must be provided with specific information required to satisfy RF exposure compliance for final host devices and installations. Compliance of this device in all final host configurations is the responsibility of the Grantee and may require the submission of a Class II permissive change or new application.



Mail To: