FCC ID 2AD66-1276-C1

Wireless Module

by NiceRF Wireless Technology LTD.

Grantee Code: 2AD66   Product Code: 1276C1
Latest application date: 2024-10-28

FCC ID Device Details

FCC ID2AD66-1276-C1
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AD66
Product Code1276C1
Applicant BusinessNiceRF Wireless Technology LTD. 🇨🇳
Related Domains nicerf.com
Equipment ClassWireless Module
Test FirmShenzhen Morlab Communications Technology Co. Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
902.5-927.5 MHzOriginal Equipment2024-10-28
902.5-927.5 MHzOriginal Equipment2017-11-27

Exhibits

DocumentTypeAvailableFile
User_manualUsers Manual2025-04-27PDF 730.2 KB
Users ManualUsers Manual2017-11-27PDF 625.1 KB
Internal_PhotosInternal Photos2025-04-27PDF 259.9 KB
Internal PhotosInternal Photos2017-11-27PDF 276.6 KB
External_PhotosExternal Photos2025-04-27PDF 363.4 KB
External PhotosExternal Photos2017-11-27PDF 394.3 KB
labelID Label/Location Info2024-10-28PDF 247.5 KB
Label and Label LocationID Label/Location Info2017-11-27PDF 505.4 KB
Test_Setup_Photos_DTSTest Setup Photos2025-04-27PDF 376.7 KB
Test Setup PhotoTest Setup Photos2017-11-27PDF 557 KB
Antenna_SpecTest Report2024-10-28PDF 1.2 MB
Antenna_specTest Report2024-10-28PDF 1.7 MB
SZ24090158W01_LoRa_DTSTest Report2024-10-28PDF 3.5 MB
SZ24090158W01_NiceRF__LoRa_DTSTest Report2024-10-28PDF 3.5 MB
Test ReportTest Report2017-11-27PDF 980.4 KB
Attestation_Statements_Part2.911_d_5Attestation Statements2024-10-28PDF 155.6 KB
Attestation_Statements_Part2.911_d_7Attestation Statements2024-10-28PDF 176.9 KB
Confidentiality LetterCover Letter(s)2024-10-28PDF 121.3 KB
Modular_request_letterCover Letter(s)2024-10-28PDF 88.5 KB
POACover Letter(s)2024-10-28PDF 113.4 KB
Cover LetterCover Letter(s)2017-11-27PDF 18.8 KB
Letter_of_AuthorizationCover Letter(s)2017-11-27PDF 17.1 KB
Long ConfidentialityCover Letter(s)2017-11-27PDF 21.9 KB
SZ24090158S01_NiceRF_RF_ExposureRF Exposure Info2024-10-28PDF 395.6 KB
SZ24090158S01_RF_ExposureRF Exposure Info2024-10-28PDF 395.6 KB
Block Diagram Metadata onlyBlock DiagramPDF 65.1 KB
Block diagram Metadata onlyBlock DiagramPDF 249.5 KB
SCH Metadata onlySchematicsPDF 16.4 KB
Schematics Metadata onlySchematicsPDF 39.5 KB
Operation Description Metadata onlyOperational DescriptionPDF 230.7 KB
Operation description Metadata onlyOperational DescriptionPDF 195.5 KB
BOM Metadata onlyParts List/Tune Up InfoPDF 128.6 KB

Application Information

Application IDRoSH+ulzF00oOiXDqvo+7w==
Final Action Date2024-10-28
Application PurposeOriginal Equipment
Applicant FRN0024270415
Model1276-C1
Frequency Range902.5-927.5 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionWireless Module
Responsible PartyGH. Song, ghsong@nicerf.com , 0755-27838582
Test FirmMr. Su Feng, Shenzhen Morlab Communications Technology Co. Ltd., Zx.sun@morlab.cn , +86 755 36698566
TCB Emailbentje.holger@phoenix-testlab.de
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date04/27/2025
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power is maximum peak conducted.Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369.

Applications

Application IDDatePurpose
RoSH+ulzF00oOiXDqvo+7w==2024-10-28Original Equipment
M36C3s4CrQBW75GHW47K7Q==2017-11-27Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
902.5-927.5 MHz15CCC
902.5-927.5 MHz0.074990015C

Grants

TCB Grant - Application RoSH+ulzF00oOiXDqvo+7w==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  PHOENIX TESTLAB GmbH
Koenigswinkel 10
32825 Blomberg,
Germany
Date of Grant: 10/28/2024

Application Dated: 10/28/2024
NiceRF Wireless Technology LTD.
309-314, Bldg A,Hongdu business building, Xin'an
street, Zone 43, Baoan Dist, Shenzhen 518101
Shenzhen,,
China
 
Attention: GH. Song

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AD66-1276-C1
Name of Grantee:  NiceRF Wireless Technology LTD.
Equipment Class: Digital Transmission System
Notes: Wireless Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.5  -  927.5 0.07499  

Output power is maximum peak conducted.
Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369.

EAS Grant - Application RoSH+ulzF00oOiXDqvo+7w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

NiceRF Wireless Technology LTD.
309-314, Bldg A,Hongdu business building, Xin'an street, Zone 43, Baoan Dist, Shenzhen 518101
Shenzhen,,
China
  Date of Grant: 10/28/2024

Application Dated: 10/28/2024
 
Attention: GH. Song

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AD66-1276-C1
Name of Grantee:  NiceRF Wireless Technology LTD.
Equipment Class: Digital Transmission System
Notes: Wireless Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.5  -  927.5 0.07499  

Output power is maximum peak conducted.
Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). The host integrator installing this module into their product must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369.



TCB Grant - Application M36C3s4CrQBW75GHW47K7Q==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 11/27/2017

Application Dated: 11/27/2017
NiceRF Wireless Technology LTD.
309-314, Bldg A,Hongdu business building, Xin'an
street, Zone 43, Baoan Dist, Shenzhen 518101
Shenzhen,,
China
 
Attention: GH. Song

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AD66-1276C1
Name of Grantee:  NiceRF Wireless Technology LTD.
Equipment Class: Part 15 Low Power Communication Device Transmitter
Notes: LoRa RF Transceiver Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 902.5  -  927.5  

Single Modular Approval. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. This transmitter is restricted for use with the specific antenna(s) tested in this application for Certification and must not be co-located or operating in conjunction with any other antenna or transmitters within a host device, except in accordance with FCC multi-transmitter product procedures. The installation of the transmitter must ensure that the antenna has a separation distance of at least 20cm from all persons or compliance must be demonstrated according to FCC SAR procedures. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application M36C3s4CrQBW75GHW47K7Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

NiceRF Wireless Technology LTD.
309-314, Bldg A,Hongdu business building, Xin'an street, Zone 43, Baoan Dist, Shenzhen 518101
Shenzhen,,
China
  Date of Grant: 11/27/2017

Application Dated: 11/27/2017
 
Attention: GH. Song

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AD66-1276C1
Name of Grantee:  NiceRF Wireless Technology LTD.
Equipment Class: Part 15 Low Power Communication Device Transmitter
Notes: LoRa RF Transceiver Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 902.5  -  927.5  

Single Modular Approval. This grant is valid only when the module is sold to OEM integrators and must be installed by the OEM or OEM integrators. This transmitter is restricted for use with the specific antenna(s) tested in this application for Certification and must not be co-located or operating in conjunction with any other antenna or transmitters within a host device, except in accordance with FCC multi-transmitter product procedures. The installation of the transmitter must ensure that the antenna has a separation distance of at least 20cm from all persons or compliance must be demonstrated according to FCC SAR procedures. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: