FCC ID 2AD8UFW2PADPM01
Nokia FW2P LTE module
by Nokia Solutions and Networks, OY
Grantee Code: 2AD8U Product Code: FW2PADPM01
Latest application date: 2019-08-07
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 748.5-753.5 MHz | Class II permissive change or modification of presently authorized equipment | 2019-08-07 |
| 748.5-753.5 MHz | Original Equipment | 2017-05-10 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| External Photos_rev.pdf | External Photos | 2017-11-05 | PDF 539.5 KB |
| Label and Label Location.pdf | ID Label/Location Info | 2017-05-10 | PDF 223.1 KB |
| Test Setup Photo.pdf | Test Setup Photos | 2017-11-05 | PDF 262.6 KB |
| Test Report (Part 27) Part 1 rev.pdf | Test Report | 2019-08-07 | PDF 5 MB |
| Test Report (Part 27) Part 2 rev.pdf | Test Report | 2019-08-07 | PDF 5.5 MB |
| Test Report_rev.pdf | Test Report | 2017-05-10 | PDF 1.8 MB |
| Confidentiality Request (Long term).pdf | Cover Letter(s) | 2019-08-07 | PDF 106.4 KB |
| Cover Letter (Agent Authorization).pdf | Cover Letter(s) | 2019-08-07 | PDF 109.2 KB |
| Cover Letter (Description of Change).pdf | Cover Letter(s) | 2019-08-07 | PDF 122.7 KB |
| Confidentiality Request (long-term)_rev.pdf | Cover Letter(s) | 2017-05-10 | PDF 488.2 KB |
| Confidentiality Request (short-term)_rev.pdf | Cover Letter(s) | 2017-05-10 | PDF 518.9 KB |
| Cover Letter (Agent Authorization)_rev.pdf | Cover Letter(s) | 2017-05-10 | PDF 517 KB |
| Cover Letter (Declaration Letter)_rev.pdf | Cover Letter(s) | 2017-05-10 | PDF 527.2 KB |
| Cover Letter (Modular Approval Request)_rev.pdf | Cover Letter(s) | 2017-05-10 | PDF 26.6 KB |
| Cover Letter- NDA.pdf | Cover Letter(s) | 2017-05-10 | PDF 63.2 KB |
| RF Exposure Info (MPE) rev.pdf | RF Exposure Info | 2019-08-07 | PDF 50.4 KB |
| RF Exposure info.pdf | RF Exposure Info | 2017-05-10 | PDF 242.3 KB |
| Users Manual_rev.pdf Metadata only | Users Manual | PDF 690.6 KB | |
| Internal Photos_rev.pdf Metadata only | Internal Photos | PDF 715.8 KB | |
| Block Diagram.pdf Metadata only | Block Diagram | PDF 934.1 KB | |
| Schematic.pdf Metadata only | Schematics | PDF 1.4 MB | |
| Operation Description_rev 2.pdf Metadata only | Operational Description | PDF 36.9 KB | |
| Theory of Operation rev2.pdf Metadata only | Operational Description | PDF 384.4 KB | |
| Part List.pdf Metadata only | Parts List/Tune Up Info | PDF 354.3 KB | |
| Tune Up Procedure_rev.pdf Metadata only | Parts List/Tune Up Info | PDF 780.3 KB |
Application Information
| Application ID | nQ1Ff2vNC3iJO23GYuFgrw== |
|---|---|
| Final Action Date | 2019-08-07 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0031452253 |
| Model | FW2PADPM01 |
| Frequency Range | 748.5-753.5 MHz |
| Equipment Class | TNB - Licensed Non-Broadcast Station Transmitter |
| Device Description | Nokia FW2P LTE module |
| Responsible Party | Lee Klinkenborg, R&D; Engineer, lee.klinkenborg@nokia.com  , 2242217580 |
| Agent | Joanna Joanna Joanna, Bureau Veritas Consumer Products Services (H.K.) L, joanna.hung@tw.bureauveritas.com  , 88632641930 |
| Test Firm | Richard Chen, Bureau Veritas CPS (H.K.) Ltd., Taoyuan Branch, richard.chen@bureauveritas.com  , +886-(0)3-260-0884 |
| TCB Email | tcb@us.bureauveritas.com  |
| TCB Scope | B1: Commercial mobile radio services equipment in the following 47 CFR Parts 20, 22 (cellular), 24,25 (below 3 GHz) & 27 |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | CLASS II PERMISSIVE CHANGE: Software enable LTE band 13 wideband 256QAM for 5/10MHz channel bandwidth, NB-IoT In-band for 5/10MHz channel bandwidth and NB-IoT Guard-band for 10MHz channel bandwidth. The NB-IoT sub-carriers spacing is 15kHz. Limited Modular Approval for mobile RF exposure conditions. Power listed is the maximum ERP value. Values listed for LTE operations are for the highest power and the widest bandwidth for each modulation. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 33 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installations only. OEM integrators and end users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The maximum antenna gain is 6dBi in 746-787 MHz. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| nQ1Ff2vNC3iJO23GYuFgrw== | 2019-08-07 | Class II permissive change or modification of presently authorized equipment |
| LMk3RVRx8uWgc0IGIoBe9g== | 2017-05-10 | Original Equipment |
Equipment Authorization
| Frequency | Output | Tolerance | Emission | Rules | Grant Notes |
|---|---|---|---|---|---|
| 748.5-753.5 MHz | 2.085 | 0.061ppm | 4M51G7D | 27 | MO |
| 748.5-753.5 MHz | 1.007 | 0.061ppm | 4M49D7W | 27 | MO |
| 748.5-753.5 MHz | 2.089 | 0.061ppm | 4M50D7W | 27 | MO |
| 748.5-753.5 MHz | 2.051 | 0.061ppm | 4M50D7W | 27 | MO |
| 748.5-753.5 MHz | 1.358 | 0.005ppm | 4M49G7D | 27 | MO |
| 751 MHz | 0.997 | 0.061ppm | 9M16D7W | 27 | MO |
| 751 MHz | 1.977 | 0.061ppm | 9M02G7D | 27 | MO |
| 751 MHz | 1.982 | 0.061ppm | 9M02D7W | 27 | MO |
| 751 MHz | 1.954 | 0.061ppm | 9M02D7W | 27 | MO |
| 751 MHz | 1.496 | 0.065ppm | 9M20G7D | 27 | MO |
| 751 MHz | 1.368 | 0.005ppm | 8M94G7D | 27 | MO |
Grants
TCB Grant - Application nQ1Ff2vNC3iJO23GYuFgrw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. 775 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 08/07/2019 Application Dated: 08/07/2019 |
| Nokia Solutions and Networks, OY |
| 2000 W. Lucent Lane |
| Naperville, IL 60563 |
| Attention: Lee Klinkenborg , R&D Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AD8UFW2PADPM01 |
| Name of Grantee: | Nokia Solutions and Networks, OY |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | Nokia FW2P LTE module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| MO | 27 | 748.5 - 753.5 | 2.085 | 0.061 PM | 4M51G7D |
| MO | 27 | 748.5 - 753.5 | 2.089 | 0.061 PM | 4M50D7W |
| MO | 27 | 748.5 - 753.5 | 2.051 | 0.061 PM | 4M50D7W |
| MO | 27 | 751.0 - 751.0 | 1.977 | 0.061 PM | 9M02G7D |
| MO | 27 | 751.0 - 751.0 | 1.982 | 0.061 PM | 9M02D7W |
| MO | 27 | 751.0 - 751.0 | 1.954 | 0.061 PM | 9M02D7W |
| MO | 27 | 751.0 - 751.0 | 1.496 | 0.065 PM | 9M20G7D |
| MO | 27 | 751.0 - 751.0 | 1.368 | 0.005 PM | 8M94G7D |
| MO | 27 | 748.5 - 753.5 | 1.358 | 0.005 PM | 4M49G7D |
| MO | 27 | 751.0 - 751.0 | 0.997 | 0.061 PM | 9M16D7W |
| MO | 27 | 748.5 - 753.5 | 1.007 | 0.061 PM | 4M49D7W |
| CLASS II PERMISSIVE CHANGE: Software enable LTE band 13 wideband 256QAM for 5/10MHz channel bandwidth, NB-IoT In-band for 5/10MHz channel bandwidth and NB-IoT Guard-band for 10MHz channel bandwidth. The NB-IoT sub-carriers spacing is 15kHz. Limited Modular Approval for mobile RF exposure conditions. Power listed is the maximum ERP value. Values listed for LTE operations are for the highest power and the widest bandwidth for each modulation. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 33 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installations only. OEM integrators and end users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The maximum antenna gain is 6dBi in 746-787 MHz. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application nQ1Ff2vNC3iJO23GYuFgrw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Nokia Solutions and Networks, OY 2000 W. Lucent Lane Naperville, IL 60563 United States |
Date of Grant: 08/07/2019 Application Dated: 08/07/2019 |
| Attention: Lee Klinkenborg , R&D Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AD8UFW2PADPM01 |
| Name of Grantee: | Nokia Solutions and Networks, OY |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | Nokia FW2P LTE module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| MO | 27 | 748.5 - 753.5 | 2.085 | 0.061 PM | 4M51G7D |
| MO | 27 | 748.5 - 753.5 | 2.089 | 0.061 PM | 4M50D7W |
| MO | 27 | 748.5 - 753.5 | 2.051 | 0.061 PM | 4M50D7W |
| MO | 27 | 751.0 - 751.0 | 1.977 | 0.061 PM | 9M02G7D |
| MO | 27 | 751.0 - 751.0 | 1.982 | 0.061 PM | 9M02D7W |
| MO | 27 | 751.0 - 751.0 | 1.954 | 0.061 PM | 9M02D7W |
| MO | 27 | 751.0 - 751.0 | 1.496 | 0.065 PM | 9M20G7D |
| MO | 27 | 751.0 - 751.0 | 1.368 | 0.005 PM | 8M94G7D |
| MO | 27 | 748.5 - 753.5 | 1.358 | 0.005 PM | 4M49G7D |
| MO | 27 | 751.0 - 751.0 | 0.997 | 0.061 PM | 9M16D7W |
| MO | 27 | 748.5 - 753.5 | 1.007 | 0.061 PM | 4M49D7W |
| CLASS II PERMISSIVE CHANGE: Software enable LTE band 13 wideband 256QAM for 5/10MHz channel bandwidth, NB-IoT In-band for 5/10MHz channel bandwidth and NB-IoT Guard-band for 10MHz channel bandwidth. The NB-IoT sub-carriers spacing is 15kHz. Limited Modular Approval for mobile RF exposure conditions. Power listed is the maximum ERP value. Values listed for LTE operations are for the highest power and the widest bandwidth for each modulation. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 33 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installations only. OEM integrators and end users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The maximum antenna gain is 6dBi in 746-787 MHz. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. One Distribution Center Circle Suite #1 Littleton, MA 01460 |
Date of Grant: 05/10/2017 Application Dated: 05/09/2017 |
| Nokia Solutions and Networks, OY |
| 2000 W. Lucent Lane |
| Naperville, IL 60563 |
| Attention: Lee Klinkenborg , R&D Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AD8UFW2PADPM01 |
| Name of Grantee: | Nokia Solutions and Networks, OY |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | Nokia FW2P LTE Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| MO | 27 | 748.5 - 753.5 | 2.085 | 0.061 PM | 4M51G7D |
| MO | 27 | 748.5 - 753.5 | 2.089 | 0.061 PM | 4M50D7W |
| MO | 27 | 748.5 - 753.5 | 2.051 | 0.061 PM | 4M50D7W |
| MO | 27 | 751.0 - 751.0 | 1.977 | 0.061 PM | 9M02G7D |
| MO | 27 | 751.0 - 751.0 | 1.982 | 0.061 PM | 9M02D7W |
| MO | 27 | 751.0 - 751.0 | 1.954 | 0.061 PM | 9M02D7W |
| Limited Modular Approval for mobile RF exposure conditions. Power listed is the maximum ERP value. Values listed for LTE operations are for the highest power and the widest bandwidth for each modulation. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 33 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installations only. OEM integrators and end users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The maximum antenna gain is 6dBi in 746-787 MHz. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application LMk3RVRx8uWgc0IGIoBe9g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Nokia Solutions and Networks, OY 2000 W. Lucent Lane Naperville, IL 60563 United States |
Date of Grant: 05/10/2017 Application Dated: 05/09/2017 |
| Attention: Lee Klinkenborg , R&D Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AD8UFW2PADPM01 |
| Name of Grantee: | Nokia Solutions and Networks, OY |
| Equipment Class: | Licensed Non-Broadcast Station Transmitter |
| Notes: | Nokia FW2P LTE Module |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| MO | 27 | 748.5 - 753.5 | 2.085 | 0.061 PM | 4M51G7D |
| MO | 27 | 748.5 - 753.5 | 2.089 | 0.061 PM | 4M50D7W |
| MO | 27 | 748.5 - 753.5 | 2.051 | 0.061 PM | 4M50D7W |
| MO | 27 | 751.0 - 751.0 | 1.977 | 0.061 PM | 9M02G7D |
| MO | 27 | 751.0 - 751.0 | 1.982 | 0.061 PM | 9M02D7W |
| MO | 27 | 751.0 - 751.0 | 1.954 | 0.061 PM | 9M02D7W |
| Limited Modular Approval for mobile RF exposure conditions. Power listed is the maximum ERP value. Values listed for LTE operations are for the highest power and the widest bandwidth for each modulation. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 33 cm from all persons and must not be collocated or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing or in accordance with FCC multi-transmitter product guidelines. Approval is limited to OEM installations only. OEM integrators and end users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. The maximum antenna gain is 6dBi in 746-787 MHz. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |