FCC ID 2AD8UFZCWMBOM1
US-Wi-Fi AP 2x2 OD ext. antenna
by Nokia Solutions and Networks, OY
Grantee Code: 2AD8U Product Code: FZCWMBOM1
Latest application date: 2017-08-17
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2017-08-17 |
| 5180-5240 MHz | Original Equipment | 2017-05-18 |
| 2412-2462 MHz | Original Equipment | 2017-05-18 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| External Photos rev.pdf | External Photos | 2017-11-14 | PDF 402.3 KB |
| Label and Label Location rev.pdf | ID Label/Location Info | 2017-05-18 | PDF 159.5 KB |
| Test Setup Photo_2.pdf | Test Setup Photos | 2018-02-13 | PDF 704 KB |
| Test Setup Photos.pdf Metadata only | Test Setup Photos | 2018-02-13 | PDF 622 KB |
| Test Setup Photo.pdf | Test Setup Photos | 2017-11-14 | PDF 638 KB |
| 1703TW0103-U6-FCC & IC-UNII Report_Part10_1.pdf | Test Report | 2017-08-17 | PDF 5.5 MB |
| 1703TW0103-U6-FCC & IC-UNII Report_Part11_1.pdf | Test Report | 2017-08-17 | PDF 5.1 MB |
| 1703TW0103-U6-FCC & IC-UNII Report_Part1_1.pdf | Test Report | 2017-08-17 | PDF 5 MB |
| 1703TW0103-U6-FCC & IC-UNII Report_Part2_1.pdf | Test Report | 2017-08-17 | PDF 5.5 MB |
| 1703TW0103-U6-FCC & IC-UNII Report_Part3_2.pdf | Test Report | 2017-08-17 | PDF 5.4 MB |
| 1703TW0103-U6-FCC & IC-UNII Report_Part4_1.pdf | Test Report | 2017-08-17 | PDF 5.4 MB |
| 1703TW0103-U6-FCC & IC-UNII Report_Part5_1.pdf | Test Report | 2017-08-17 | PDF 5.1 MB |
| 1703TW0103-U6-FCC & IC-UNII Report_Part6_1.pdf | Test Report | 2017-08-17 | PDF 5.2 MB |
| 1703TW0103-U6-FCC & IC-UNII Report_Part7_1.pdf | Test Report | 2017-08-17 | PDF 5.3 MB |
| 1703TW0103-U6-FCC & IC-UNII Report_Part8_1.pdf | Test Report | 2017-08-17 | PDF 5.5 MB |
| 1703TW0103-U6-FCC & IC-UNII Report_Part9_1.pdf | Test Report | 2017-08-17 | PDF 5.5 MB |
| DFS Report_Part1.pdf | Test Report | 2017-08-17 | PDF 3.4 MB |
| DFS Report_Part2.pdf | Test Report | 2017-08-17 | PDF 2.5 MB |
| 1703TW0103-U1-FCC-DTS Report_Part 1_05.18.pdf | Test Report | 2017-05-18 | PDF 5.4 MB |
| 1703TW0103-U1-FCC-DTS Report_Part 2_05.16.pdf | Test Report | 2017-05-18 | PDF 5.1 MB |
| 1703TW0103-U1-FCC-DTS Report_Part 3_05.16.pdf | Test Report | 2017-05-18 | PDF 5.5 MB |
| 1703TW0103-U1-FCC-DTS Report_Part 4_05.16.pdf | Test Report | 2017-05-18 | PDF 619.1 KB |
| 1703TW0103-U2-FCC-UNII Report_Part 1_05.16.pdf | Test Report | 2017-05-18 | PDF 5.5 MB |
| 1703TW0103-U2-FCC-UNII Report_Part 2_05.16.pdf | Test Report | 2017-05-18 | PDF 5.3 MB |
| 1703TW0103-U2-FCC-UNII Report_Part 3_05.16.pdf | Test Report | 2017-05-18 | PDF 5 MB |
| 1703TW0103-U2-FCC-UNII Report_Part 4_05.16.pdf | Test Report | 2017-05-18 | PDF 5.6 MB |
| 1703TW0103-U2-FCC-UNII Report_Part 5_05.16.pdf | Test Report | 2017-05-18 | PDF 3.4 MB |
| Attestation statement_Attestation.pdf | Attestation Statements | 2017-05-18 | PDF 21.3 KB |
| Confidentiality Letter-long term_3.pdf | Cover Letter(s) | 2017-08-17 | PDF 21.7 KB |
| Confidentiality request - short-term_2.pdf | Cover Letter(s) | 2017-08-17 | PDF 90.9 KB |
| Cover letter_Agent authorization.pdf | Cover Letter(s) | 2017-08-17 | PDF 22.3 KB |
| Cover letter_Class II Permissive Change_1.pdf | Cover Letter(s) | 2017-08-17 | PDF 18 KB |
| Confidentiality Letter - long term.pdf | Cover Letter(s) | 2017-05-18 | PDF 24.2 KB |
| Confidentiality letter - short-term.pdf | Cover Letter(s) | 2017-05-18 | PDF 91 KB |
| Cover - Non-disclosure agreement_NDA.pdf | Cover Letter(s) | 2017-05-18 | PDF 63.4 KB |
| Cover letter - Agent authorization.pdf | Cover Letter(s) | 2017-05-18 | PDF 22.3 KB |
| Cover letter - Modular approval letter.pdf | Cover Letter(s) | 2017-05-18 | PDF 57.4 KB |
| Cover letter - Professional installation Declaration Letter.pdf | Cover Letter(s) | 2017-05-18 | PDF 103.7 KB |
| Cover letter_FCC_DoC Letter.pdf | Cover Letter(s) | 2017-05-18 | PDF 42.8 KB |
| RF Exposure Report_1 - MPE report.pdf | RF Exposure Info | 2017-08-17 | PDF 280.5 KB |
| RF Exposure Report - MPE report.pdf | RF Exposure Info | 2017-05-18 | PDF 268 KB |
| RF Exposure information - MBO Overall RF Exposure (003).pdf | RF Exposure Info | 2017-05-18 | PDF 228.8 KB |
| User Manual.pdf Metadata only | Users Manual | PDF 972 KB | |
| Internal Photos.pdf Metadata only | Internal Photos | PDF 1.4 MB | |
| Block Diagram.pdf Metadata only | Block Diagram | PDF 104 KB | |
| Schematics.pdf Metadata only | Schematics | PDF 772.3 KB | |
| Operation Description and Software Operational description.pdf Metadata only | Operational Description | PDF 234 KB | |
| Operational Description and Software Operational Description.pdf Metadata only | Operational Description | PDF 233.1 KB |
Application Information
| Application ID | EjZU0hB2jWRawuiKbnOcFQ== |
|---|---|
| Final Action Date | 2017-08-17 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0031452253 |
| Model | FZCWMBOM1 |
| Frequency Range | 5180-5240 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | US-Wi-Fi AP 2x2 OD ext. antenna |
| Responsible Party | Lee Klinkenborg, R&D; Engineer, lee.klinkenborg@nokia.com  , 2242217580 |
| Agent | Robin Robin Robin, MRT Technology (Suzhou) Co., Ltd, robinwu@mrt-cert.com  , 8651266308358 |
| Test Firm | Chenz Ker, MRT Technology (Taiwan) Co.,Ltd, chenzker@mrt-cert.com , +886-3-328-8388 |
| TCB Email | tcb@us.bureauveritas.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 02/13/2018 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | Yes |
| Grant Comments | Class II Permissive change for adding DFS bands by software enabling as described in this filing. Power listed is the maximum combined conducted output power. Limited Modular Approval for mobile RF Exposure conditions. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing under this FCC ID and/or in accordance with FCC multi-transmitter product guidelines. Compliance of this device in all final product configurations is the responsibility of the grantee. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators. OEM integrators must ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). This device has 20MHz, 40MHz, and 80MHz bandwidth modes. This device must be professionally installed. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| EjZU0hB2jWRawuiKbnOcFQ== | 2017-08-17 | Class II permissive change or modification of presently authorized equipment |
| dRmu4zu/uNV0JE37j/0shg== | 2017-05-18 | Original Equipment |
| GaYVzFjEWXyRSMnkcfzEbg== | 2017-05-18 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application GaYVzFjEWXyRSMnkcfzEbg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. One Distribution Center Circle Suite #1 Littleton, MA 01460 |
Date of Grant: 05/18/2017 Application Dated: 05/18/2017 |
| Nokia Solutions and Networks, OY |
| 2000 W. Lucent Lane |
| Naperville, IL 60563 |
| Attention: Lee Klinkenborg , R&D Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AD8UFZCWMBOM1 |
| Name of Grantee: | Nokia Solutions and Networks, OY |
| Equipment Class: | Digital Transmission System |
| Notes: | US Wi-Fi AP 2x2 OD ext. antenna |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.2944 |
| Power listed is the maximum combined conducted output power. Limited Modular Approval for mobile RF Exposure conditions. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing under this FCC ID and/or in accordance with FCC multi-transmitter product guidelines. Compliance of this device in all final product configurations is the responsibility of the grantee. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators. OEM integrators must ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). This device has 20MHz and 40MHz bandwidth modes. This device must be professionally installed. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application GaYVzFjEWXyRSMnkcfzEbg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Nokia Solutions and Networks, OY 2000 W. Lucent Lane Naperville, IL 60563 United States |
Date of Grant: 05/18/2017 Application Dated: 05/18/2017 |
| Attention: Lee Klinkenborg , R&D Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AD8UFZCWMBOM1 |
| Name of Grantee: | Nokia Solutions and Networks, OY |
| Equipment Class: | Digital Transmission System |
| Notes: | US Wi-Fi AP 2x2 OD ext. antenna |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.2944 |
| Power listed is the maximum combined conducted output power. Limited Modular Approval for mobile RF Exposure conditions. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing under this FCC ID and/or in accordance with FCC multi-transmitter product guidelines. Compliance of this device in all final product configurations is the responsibility of the grantee. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators. OEM integrators must ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). This device has 20MHz and 40MHz bandwidth modes. This device must be professionally installed. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. One Distribution Center Circle Suite #1 Littleton, MA 01460 |
Date of Grant: 08/17/2017 Application Dated: 07/26/2017 |
| Nokia Solutions and Networks, OY |
| 2000 W. Lucent Lane |
| Naperville, IL 60563 |
| Attention: Lee Klinkenborg , R&D Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AD8UFZCWMBOM1 |
| Name of Grantee: | Nokia Solutions and Networks, OY |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | US-Wi-Fi AP 2x2 OD ext. antenna |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.0232 | ||
| 38 CC MO ND | 15E | 5260.0 - 5320.0 | 0.1683 | ||
| 38 CC MO ND | 15E | 5500.0 - 5720.0 | 0.1578 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.2535 |
| Class II Permissive change for adding DFS bands by software enabling as described in this filing. Power listed is the maximum combined conducted output power. Limited Modular Approval for mobile RF Exposure conditions. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing under this FCC ID and/or in accordance with FCC multi-transmitter product guidelines. Compliance of this device in all final product configurations is the responsibility of the grantee. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators. OEM integrators must ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). This device has 20MHz, 40MHz, and 80MHz bandwidth modes. This device must be professionally installed. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application EjZU0hB2jWRawuiKbnOcFQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Nokia Solutions and Networks, OY 2000 W. Lucent Lane Naperville, IL 60563 United States |
Date of Grant: 08/17/2017 Application Dated: 07/26/2017 |
| Attention: Lee Klinkenborg , R&D Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AD8UFZCWMBOM1 |
| Name of Grantee: | Nokia Solutions and Networks, OY |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | US-Wi-Fi AP 2x2 OD ext. antenna |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.0232 | ||
| 38 CC MO ND | 15E | 5260.0 - 5320.0 | 0.1683 | ||
| 38 CC MO ND | 15E | 5500.0 - 5720.0 | 0.1578 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.2535 |
| Class II Permissive change for adding DFS bands by software enabling as described in this filing. Power listed is the maximum combined conducted output power. Limited Modular Approval for mobile RF Exposure conditions. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing under this FCC ID and/or in accordance with FCC multi-transmitter product guidelines. Compliance of this device in all final product configurations is the responsibility of the grantee. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators. OEM integrators must ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). This device has 20MHz, 40MHz, and 80MHz bandwidth modes. This device must be professionally installed. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. One Distribution Center Circle Suite #1 Littleton, MA 01460 |
Date of Grant: 05/18/2017 Application Dated: 05/18/2017 |
| Nokia Solutions and Networks, OY |
| 2000 W. Lucent Lane |
| Naperville, IL 60563 |
| Attention: Lee Klinkenborg , R&D Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AD8UFZCWMBOM1 |
| Name of Grantee: | Nokia Solutions and Networks, OY |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | US Wi-Fi AP 2x2 OD ext. antenna |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.0232 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.2535 |
| Power listed is the maximum combined conducted output power. Limited Modular Approval for mobile RF Exposure conditions. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing under this FCC ID and/or in accordance with FCC multi-transmitter product guidelines. Compliance of this device in all final product configurations is the responsibility of the grantee. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators. OEM integrators must ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). This device has 20MHz, 40MHz, and 80MHz bandwidth modes. This device must be professionally installed. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application dRmu4zu/uNV0JE37j/0shg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Nokia Solutions and Networks, OY 2000 W. Lucent Lane Naperville, IL 60563 United States |
Date of Grant: 05/18/2017 Application Dated: 05/18/2017 |
| Attention: Lee Klinkenborg , R&D Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AD8UFZCWMBOM1 |
| Name of Grantee: | Nokia Solutions and Networks, OY |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | US Wi-Fi AP 2x2 OD ext. antenna |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC MO | 15E | 5180.0 - 5240.0 | 0.0232 | ||
| 38 CC MO | 15E | 5745.0 - 5825.0 | 0.2535 |
| Power listed is the maximum combined conducted output power. Limited Modular Approval for mobile RF Exposure conditions. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing under this FCC ID and/or in accordance with FCC multi-transmitter product guidelines. Compliance of this device in all final product configurations is the responsibility of the grantee. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators. OEM integrators must ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). This device has 20MHz, 40MHz, and 80MHz bandwidth modes. This device must be professionally installed. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |