FCC ID 2AD8UFZCWMBOM2
AC220m Wi-Fi module OD US
by Nokia Solutions and Networks, OY
Grantee Code: 2AD8U Product Code: FZCWMBOM2
Latest application date: 2018-06-06
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2018-06-06 |
| 5180-5240 MHz | Class II permissive change or modification of presently authorized equipment | 2018-06-06 |
| 2412-2462 MHz | Original Equipment | 2018-02-09 |
| 5180-5240 MHz | Original Equipment | 2018-02-09 |
Exhibits
Application Information
| Application ID | zw8IDRsT2wtJ9YmbR1jcuQ== |
|---|---|
| Final Action Date | 2018-06-06 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0031452253 |
| Model | FZCWMBOM2 |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | AC220m Wi-Fi module OD US |
| Responsible Party | Lee Klinkenborg, R&D; Engineer, lee.klinkenborg@nokia.com  , 2242217580 |
| Agent | Marlin Marlin Marlin, MRT Technology (Suzhou) Co., Ltd, marlinchen@mrt-cert.com  , 8651266308358 |
| Test Firm | Chenz Ker, MRT Technology (Taiwan) Co.,Ltd, chenzker@mrt-cert.com , +886-3-328-8388 |
| TCB Email | tcb@us.bureauveritas.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 12/03/2018 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Limited Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | Yes |
| Grant Comments | Class II Permissive Change to add a new supported directional antenna type and to enable DFS channels. Power listed is the maximum combined conducted output power. Limited Modular Approval for mobile RF Exposure conditions. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 24cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing under this FCC ID and/or in accordance with FCC multi-transmitter product guidelines. Compliance of this device in all final product configurations is the responsibility of the grantee. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators. OEM integrators must ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). This device has 20MHz and 40MHz bandwidth modes. This device must be professionally installed. Marketing to general public is prohibited. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| zw8IDRsT2wtJ9YmbR1jcuQ== | 2018-06-06 | Class II permissive change or modification of presently authorized equipment |
| 6Z6kmENU8RYJbGVTU1AFtA== | 2018-06-06 | Class II permissive change or modification of presently authorized equipment |
| xAzOsAC1dGzOAiApH9muig== | 2018-02-09 | Original Equipment |
| 7TihiRoNRKU7ULhV0bPFKw== | 2018-02-09 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application zw8IDRsT2wtJ9YmbR1jcuQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. One Distribution Center Circle Suite #1 Littleton, MA 01460 |
Date of Grant: 06/06/2018 Application Dated: 05/23/2018 |
| Nokia Solutions and Networks, OY |
| 2000 W. Lucent Lane |
| Naperville, IL 60563 |
| Attention: Lee Klinkenborg , R&D Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AD8UFZCWMBOM2 |
| Name of Grantee: | Nokia Solutions and Networks, OY |
| Equipment Class: | Digital Transmission System |
| Notes: | AC220m Wi-Fi module OD US |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.8551 |
| Class II Permissive Change to add a new supported directional antenna type and to enable DFS channels. Power listed is the maximum combined conducted output power. Limited Modular Approval for mobile RF Exposure conditions. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 24cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing under this FCC ID and/or in accordance with FCC multi-transmitter product guidelines. Compliance of this device in all final product configurations is the responsibility of the grantee. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators. OEM integrators must ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). This device has 20MHz and 40MHz bandwidth modes. This device must be professionally installed. Marketing to general public is prohibited. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application zw8IDRsT2wtJ9YmbR1jcuQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Nokia Solutions and Networks, OY 2000 W. Lucent Lane Naperville, IL 60563 United States |
Date of Grant: 06/06/2018 Application Dated: 05/23/2018 |
| Attention: Lee Klinkenborg , R&D Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AD8UFZCWMBOM2 |
| Name of Grantee: | Nokia Solutions and Networks, OY |
| Equipment Class: | Digital Transmission System |
| Notes: | AC220m Wi-Fi module OD US |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.8551 |
| Class II Permissive Change to add a new supported directional antenna type and to enable DFS channels. Power listed is the maximum combined conducted output power. Limited Modular Approval for mobile RF Exposure conditions. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 24cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing under this FCC ID and/or in accordance with FCC multi-transmitter product guidelines. Compliance of this device in all final product configurations is the responsibility of the grantee. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators. OEM integrators must ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). This device has 20MHz and 40MHz bandwidth modes. This device must be professionally installed. Marketing to general public is prohibited. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. One Distribution Center Circle Suite #1 Littleton, MA 01460 |
Date of Grant: 02/09/2018 Application Dated: 02/08/2018 |
| Nokia Solutions and Networks, OY |
| 2000 W. Lucent Lane |
| Naperville, IL 60563 |
| Attention: Lee Klinkenborg , R&D Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AD8UFZCWMBOM2 |
| Name of Grantee: | Nokia Solutions and Networks, OY |
| Equipment Class: | Digital Transmission System |
| Notes: | AC220m Wi-Fi module OD US |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.8551 |
| Power listed is the maximum combined conducted output power. Limited Modular Approval for mobile RF Exposure conditions. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 24cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing under this FCC ID and/or in accordance with FCC multi-transmitter product guidelines. Compliance of this device in all final product configurations is the responsibility of the grantee. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators. OEM integrators must ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). This device has 20MHz and 40MHz bandwidth modes. This device must be professionally installed. Marketing to general public is prohibited. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application xAzOsAC1dGzOAiApH9muig==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Nokia Solutions and Networks, OY 2000 W. Lucent Lane Naperville, IL 60563 United States |
Date of Grant: 02/09/2018 Application Dated: 02/08/2018 |
| Attention: Lee Klinkenborg , R&D Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AD8UFZCWMBOM2 |
| Name of Grantee: | Nokia Solutions and Networks, OY |
| Equipment Class: | Digital Transmission System |
| Notes: | AC220m Wi-Fi module OD US |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.8551 |
| Power listed is the maximum combined conducted output power. Limited Modular Approval for mobile RF Exposure conditions. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 24cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing under this FCC ID and/or in accordance with FCC multi-transmitter product guidelines. Compliance of this device in all final product configurations is the responsibility of the grantee. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators. OEM integrators must ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). This device has 20MHz and 40MHz bandwidth modes. This device must be professionally installed. Marketing to general public is prohibited. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. One Distribution Center Circle Suite #1 Littleton, MA 01460 |
Date of Grant: 02/09/2018 Application Dated: 02/08/2018 |
| Nokia Solutions and Networks, OY |
| 2000 W. Lucent Lane |
| Naperville, IL 60563 |
| Attention: Lee Klinkenborg , R&D Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AD8UFZCWMBOM2 |
| Name of Grantee: | Nokia Solutions and Networks, OY |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | AC220m Wi-Fi module OD US |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.0239 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.6252 |
| Power listed is the maximum combined conducted output power. Limited Modular Approval for mobile RF Exposure conditions. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 24cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing under this FCC ID and/or in accordance with FCC multi-transmitter product guidelines. Compliance of this device in all final product configurations is the responsibility of the grantee. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators. OEM integrators must ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). This device has 20MHz, 40MHz, and 80MHz bandwidth modes. This device must be professionally installed. Marketing to general public is prohibited. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application 7TihiRoNRKU7ULhV0bPFKw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Nokia Solutions and Networks, OY 2000 W. Lucent Lane Naperville, IL 60563 United States |
Date of Grant: 02/09/2018 Application Dated: 02/08/2018 |
| Attention: Lee Klinkenborg , R&D Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AD8UFZCWMBOM2 |
| Name of Grantee: | Nokia Solutions and Networks, OY |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | AC220m Wi-Fi module OD US |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.0239 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.6252 |
| Power listed is the maximum combined conducted output power. Limited Modular Approval for mobile RF Exposure conditions. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 24cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing under this FCC ID and/or in accordance with FCC multi-transmitter product guidelines. Compliance of this device in all final product configurations is the responsibility of the grantee. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators. OEM integrators must ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). This device has 20MHz, 40MHz, and 80MHz bandwidth modes. This device must be professionally installed. Marketing to general public is prohibited. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Bureau Veritas Consumer Products Services, Inc. One Distribution Center Circle Suite #1 Littleton, MA 01460 |
Date of Grant: 06/06/2018 Application Dated: 05/23/2018 |
| Nokia Solutions and Networks, OY |
| 2000 W. Lucent Lane |
| Naperville, IL 60563 |
| Attention: Lee Klinkenborg , R&D Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AD8UFZCWMBOM2 |
| Name of Grantee: | Nokia Solutions and Networks, OY |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | AC220m Wi-Fi module OD US |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.0239 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.1807 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.1884 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.6252 |
| Class II Permissive Change to add a new supported directional antenna type and to enable DFS channels. Power listed is the maximum combined conducted output power. Limited Modular Approval for mobile RF Exposure conditions. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 24cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing under this FCC ID and/or in accordance with FCC multi-transmitter product guidelines. Compliance of this device in all final product configurations is the responsibility of the grantee. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators. OEM integrators must ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). This device has 20MHz, 40MHz, and 80MHz bandwidth modes. This device must be professionally installed. Marketing to general public is prohibited. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application 6Z6kmENU8RYJbGVTU1AFtA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Nokia Solutions and Networks, OY 2000 W. Lucent Lane Naperville, IL 60563 United States |
Date of Grant: 06/06/2018 Application Dated: 05/23/2018 |
| Attention: Lee Klinkenborg , R&D Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AD8UFZCWMBOM2 |
| Name of Grantee: | Nokia Solutions and Networks, OY |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | AC220m Wi-Fi module OD US |
| Modular Type: | Limited Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15E | 5180.0 - 5240.0 | 0.0239 | ||
| CC MO ND | 15E | 5260.0 - 5320.0 | 0.1807 | ||
| CC MO ND | 15E | 5500.0 - 5720.0 | 0.1884 | ||
| CC MO | 15E | 5745.0 - 5825.0 | 0.6252 |
| Class II Permissive Change to add a new supported directional antenna type and to enable DFS channels. Power listed is the maximum combined conducted output power. Limited Modular Approval for mobile RF Exposure conditions. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 24cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except the collocation as described in this filing under this FCC ID and/or in accordance with FCC multi-transmitter product guidelines. Compliance of this device in all final product configurations is the responsibility of the grantee. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators. OEM integrators must ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). This device has 20MHz, 40MHz, and 80MHz bandwidth modes. This device must be professionally installed. Marketing to general public is prohibited. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: |