FCC ID 2AD9Q-X4F103

The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369.

The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module.

This module meets the SAR Test Exclusion threshold specified in KDB447498 and since then, it is authorized for portable operation.

This module is to be used in host for handheld applications, i.e., small devices that are primarily hand held while being operated and do not employ a fixed infrastructure. UWB devices may not be employed for the operation of toys. Operation onboard an aircraft, a ship or a satellite is prohibited.

Antennas mounted on outdoor structures such, as antennas mounted on the outside of a building or on a telephone pole, or any fixed outdoors infrastructure are prohibited for use with this device.

The module relies on a generic host to provide shielding. As such, the host manufacturer must follow exactly the instruction guides to solder the module into the host, as specified on section 4.5 of the user manual. In case that integration of this module on a host is not properly done, then:

- Host device manufacturers must test their own device according to the same rules as this module and whichever ones additionally applicable (aside from testing other radio interfaces, or other testing simultaneous transmission, or other potentially necessary testing).

- Host manufacturers must follow some of the alternative options described below to associate their host to the module such as filing a Class 2 Permissive Change (C2PC) to the module, filing a Change FCC ID and then a C2PC, or pursuing full certification for their device including the UWB interface.

The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369.

The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module.

This module meets the SAR Test Exclusion threshold specified in KDB447498 and since then, it is authorized for portable operation.

This module is to be used in host for handheld applications, i.e., small devices that are primarily hand held while being operated and do not employ a fixed infrastructure. UWB devices may not be employed for the operation of toys. Operation onboard an aircraft, a ship or a satellite is prohibited.

Antennas mounted on outdoor structures such, as antennas mounted on the outside of a building or on a telephone pole, or any fixed outdoors infrastructure are prohibited for use with this device.

The module relies on a generic host to provide shielding. As such, the host manufacturer must follow exactly the instruction guides to solder the module into the host, as specified on section 4.5 of the user manual. In case that integration of this module on a host is not properly done, then:

- Host device manufacturers must test their own device according to the same rules as this module and whichever ones additionally applicable (aside from testing other radio interfaces, or other testing simultaneous transmission, or other potentially necessary testing).

- Host manufacturers must follow some of the alternative options described below to associate their host to the module such as filing a Class 2 Permissive Change (C2PC) to the module, filing a Change FCC ID and then a C2PC, or pursuing full certification for their device including the UWB interface.