FCC ID 2ADAP-GRJWB05J10

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Intertek Testing Services NA, Inc. 70 Codman Hill Road Boxborough, MA 01719

Date of Grant: 10/30/2023 Application Dated: 10/30/2023

Gree Electric Appliances, Inc. of Zhuhai

Jinji West Rd,Qianshan,Zhuhai,Guangdong

P.R.ChinaP.O. Box 519070,

Zhuhai, China

Attention: Linda Li

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2ADAP-GRJWB05J10
Name of Grantee:	Gree Electric Appliances, Inc. of Zhuhai
Equipment Class:	Digital Transmission System
Notes:	WIFI+BLE module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0  -  2480.0	0.00327
CC	15C	2412.0  -  2462.0	0.07943

Output power listed is conducted. Colocation of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. The module shall be only used with the integral antennas that has been originally tested and certified with this module. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must follow the integration instructions provided by the module manufacturer and must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. This device has 20MHz and 40 MHz bandwidth modes.

CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Gree Electric Appliances, Inc. of Zhuhai Jinji West Rd,Qianshan,Zhuhai,Guangdong P.R.ChinaP.O. Box 519070, Zhuhai, China

Date of Grant: 10/30/2023 Application Dated: 10/30/2023

Attention: Linda Li

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2ADAP-GRJWB05J10
Name of Grantee:	Gree Electric Appliances, Inc. of Zhuhai
Equipment Class:	Digital Transmission System
Notes:	WIFI+BLE module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2402.0  -  2480.0	0.00327
CC	15C	2412.0  -  2462.0	0.07943

Output power listed is conducted. Colocation of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. The module shall be only used with the integral antennas that has been originally tested and certified with this module. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must follow the integration instructions provided by the module manufacturer and must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. This device has 20MHz and 40 MHz bandwidth modes.

CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 7LjlR1vd8HP+SWMxhOHmrQ==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

Intertek Testing Services NA, Inc. 70 Codman Hill Road Boxborough, MA 01719

Date of Grant: 10/30/2023 Application Dated: 10/30/2023

Gree Electric Appliances, Inc. of Zhuhai

Jinji West Rd,Qianshan,Zhuhai,Guangdong

P.R.ChinaP.O. Box 519070,

Zhuhai, China

Attention: Linda Li

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2ADAP-GRJWB05J10
Name of Grantee:	Gree Electric Appliances, Inc. of Zhuhai
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	WIFI+BLE module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15E	5180.0  -  5240.0	0.02483
CC	15E	5260.0  -  5320.0	0.02489
CC	15E	5500.0  -  5580.0	0.01824
CC	15E	5510.0  -  5580.0	0.02173
CC	15E	5660.0  -  5700.0	0.0195
CC	15E	5670.0  -  5670.0	0.02399
CC	15E	5745.0  -  5825.0	0.01698
CC	15E	5755.0  -  5795.0	0.01746

Output power listed is conducted. Colocation of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. The module shall be only used with the integral antennas that has been originally tested and certified with this module. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must follow the integration instructions provided by the module manufacturer and must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. This device has 20MHz and 40 MHz bandwidth modes. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 14-30 as a Client only without Radar Detection.

CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Gree Electric Appliances, Inc. of Zhuhai Jinji West Rd,Qianshan,Zhuhai,Guangdong P.R.ChinaP.O. Box 519070, Zhuhai, China

Date of Grant: 10/30/2023 Application Dated: 10/30/2023

Attention: Linda Li

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2ADAP-GRJWB05J10
Name of Grantee:	Gree Electric Appliances, Inc. of Zhuhai
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	WIFI+BLE module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15E	5180.0  -  5240.0	0.02483
CC	15E	5260.0  -  5320.0	0.02489
CC	15E	5500.0  -  5580.0	0.01824
CC	15E	5510.0  -  5580.0	0.02173
CC	15E	5660.0  -  5700.0	0.0195
CC	15E	5670.0  -  5670.0	0.02399
CC	15E	5745.0  -  5825.0	0.01698
CC	15E	5755.0  -  5795.0	0.01746

Output power listed is conducted. Colocation of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. The module shall be only used with the integral antennas that has been originally tested and certified with this module. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. The module grantee is responsible for providing the documentation to the system integrator on restrictions of use, for continuing compliance of the module. The host integrator installing this module into their product must follow the integration instructions provided by the module manufacturer and must ensure that the final composite product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules, including the transmitter operation and should refer to guidance in KDB 996369. This device has 20MHz and 40 MHz bandwidth modes. This device complies with the Dynamic Frequency Selection (DFS) requirements of Report and Order FCC 14-30 as a Client only without Radar Detection.

CC:	This device is certified pursuant to two different Part 15 rules sections.

Mail To: