FCC ID 2ADCB-ACWIFI001

Wireless Light Module

by Acuity Brands Lighting, Inc.

Grantee Code: 2ADCB   Product Code: ACWIFI001
Latest application date: 2017-01-23

FCC ID Device Details

FCC ID2ADCB-ACWIFI001
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2ADCB
Product CodeACWIFI001
Applicant BusinessAcuity Brands Lighting, Inc. 🇺🇸
Related Domains acuitybrands.com ustech-lab.com
Equipment ClassWireless Light Module
Test FirmUS Tech

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzOriginal Equipment2017-01-23
2412-2462 MHzOriginal Equipment2017-01-23

Exhibits

DocumentTypeAvailableFile
Users Manual 122016Users Manual2017-01-23PDF 500.5 KB
Internal PhotosInternal Photos2017-01-23PDF 1.3 MB
External PhotosExternal Photos2017-01-23PDF 1.3 MB
External Photos AntennasExternal Photos2017-01-23PDF 228.5 KB
Label InfoID Label/Location Info2017-01-23PDF 309.5 KB
DFS Test PhotosTest Setup Photos2017-01-23PDF 244.8 KB
EMC Test Photos Rev 1Test Setup Photos2017-01-23PDF 808.6 KB
DFS Test Report ClientTest Report2017-01-23PDF 1.3 MB
Data Rate Additional Data 120916Test Report2017-01-23PDF 381.4 KB
Test Report 15.247 122016 Rev 2Test Report2017-01-23PDF 1.9 MB
Test Report UNII 011317 ATest Report2017-01-23PDF 4 MB
Test Report UNII 011317 BTest Report2017-01-23PDF 2.6 MB
Software Security Info Rev 1Attestation Statements2017-01-23PDF 94.3 KB
Agency LetterCover Letter(s)2017-01-23PDF 205.5 KB
Confidentiality LetterCover Letter(s)2017-01-23PDF 36.3 KB
MA Letter FCCCover Letter(s)2017-01-23PDF 48.8 KB
RF Exposure Info 120916RF Exposure Info2017-01-23PDF 57.4 KB
Block Diagram Rev 1 Metadata onlyBlock DiagramPDF 85.9 KB
Schematics Metadata onlySchematicsPDF 676 KB
Chip Info Metadata onlyOperational DescriptionPDF 396.9 KB
Operational Description 011317 Metadata onlyOperational DescriptionPDF 56.1 KB
Technical Comments and Response Metadata onlyOperational DescriptionPDF 323.9 KB

Application Information

Application IDugnAIejPO6DI8Fv8r+rV5Q==
Final Action Date2017-01-23
Application PurposeOriginal Equipment
Applicant FRN0023988462
ModelACWIFI001
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionWireless Light Module
Responsible PartyFred Carpenter, fred.carpenter@acuitybrands.com , 7708602184
AgentSandi Sandi Sandi, US Tech, smcenery@ustech-lab.com , 7707400717
Technical ContactGeorge Yang, US Tech, gyang@ustech-lab.com , 7707400717
Non-Technical ContactSandi McEnery, US Tech, smcenery@ustech-lab.com , 7707400717
Test FirmGeorge Yang, US Tech, gyang@ustech-lab.com , 770-740-0717
TCB Emailhotline@acbcert.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower Output is Conducted. This filing meets KDB 447498 as a mobile device. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures and RF Exposure compliance. This device is a client only, enables for either 2.4 or 5 GHz band operations and supporting 20 MHz and 40 MHz BW modes as described in this filing.

Applications

Application IDDatePurpose
ugnAIejPO6DI8Fv8r+rV5Q==2017-01-23Original Equipment
bTUAZn6HUV81ScHSAu9RrA==2017-01-23Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.0515CCC
2422-2452 MHz0.05315CCC
5180-5240 MHz0.02815E38, CC
5190-5230 MHz0.03415E38, CC
5260-5320 MHz0.05315E38, CC, ND
5270-5310 MHz0.03715E38, CC, ND
5500-5700 MHz0.04915E38, CC, ND
5510-5670 MHz0.04415E38, CC, ND
5745-5825 MHz0.04415E38, CC
5755-5795 MHz0.04115E38, CC

Grants

TCB Grant - Application ugnAIejPO6DI8Fv8r+rV5Q==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 01/23/2017

Application Dated: 01/22/2017
Acuity Brands Lighting, Inc.
One Lithonia Way
Conyers, GA 30012
 
Attention: Fred Carpenter

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ADCB-ACWIFI001
Name of Grantee:  Acuity Brands Lighting, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless Light Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC 15E 5180.0  -  5240.0 0.028  
38 CC 15E 5190.0  -  5230.0 0.034  
38 CC ND 15E 5260.0  -  5320.0 0.053  
38 CC ND 15E 5270.0  -  5310.0 0.037  
38 CC ND 15E 5500.0  -  5700.0 0.049  
38 CC ND 15E 5510.0  -  5670.0 0.044  
38 CC 15E 5745.0  -  5825.0 0.044  
38 CC 15E 5755.0  -  5795.0 0.041  

Power Output is Conducted. This filing meets KDB 447498 as a mobile device. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures and RF Exposure compliance. This device is a client only, enables for either 2.4 or 5 GHz band operations and supporting 20 MHz and 40 MHz BW modes as described in this filing.

38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application ugnAIejPO6DI8Fv8r+rV5Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Acuity Brands Lighting, Inc.
One Lithonia Way
Conyers, GA 30012
United States
  Date of Grant: 01/23/2017

Application Dated: 01/22/2017
 
Attention: Fred Carpenter

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ADCB-ACWIFI001
Name of Grantee:  Acuity Brands Lighting, Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Wireless Light Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC 15E 5180.0  -  5240.0 0.028  
38 CC 15E 5190.0  -  5230.0 0.034  
38 CC ND 15E 5260.0  -  5320.0 0.053  
38 CC ND 15E 5270.0  -  5310.0 0.037  
38 CC ND 15E 5500.0  -  5700.0 0.049  
38 CC ND 15E 5510.0  -  5670.0 0.044  
38 CC 15E 5745.0  -  5825.0 0.044  
38 CC 15E 5755.0  -  5795.0 0.041  

Power Output is Conducted. This filing meets KDB 447498 as a mobile device. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures and RF Exposure compliance. This device is a client only, enables for either 2.4 or 5 GHz band operations and supporting 20 MHz and 40 MHz BW modes as described in this filing.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application bTUAZn6HUV81ScHSAu9RrA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 01/23/2017

Application Dated: 01/22/2017
Acuity Brands Lighting, Inc.
One Lithonia Way
Conyers, GA 30012
 
Attention: Fred Carpenter

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ADCB-ACWIFI001
Name of Grantee:  Acuity Brands Lighting, Inc.
Equipment Class: Digital Transmission System
Notes: Wireless Light Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.05  
CC 15C 2422.0  -  2452.0 0.053  

Power Output is Conducted. This filing meets KDB 447498 as a mobile device. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures and RF Exposure compliance. This device is a client only, enables for either 2.4 or 5 GHz band operations and supporting 20 MHz and 40 MHz BW modes as described in this filing.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application bTUAZn6HUV81ScHSAu9RrA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Acuity Brands Lighting, Inc.
One Lithonia Way
Conyers, GA 30012
United States
  Date of Grant: 01/23/2017

Application Dated: 01/22/2017
 
Attention: Fred Carpenter

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ADCB-ACWIFI001
Name of Grantee:  Acuity Brands Lighting, Inc.
Equipment Class: Digital Transmission System
Notes: Wireless Light Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.05  
CC 15C 2422.0  -  2452.0 0.053  

Power Output is Conducted. This filing meets KDB 447498 as a mobile device. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures and RF Exposure compliance. This device is a client only, enables for either 2.4 or 5 GHz band operations and supporting 20 MHz and 40 MHz BW modes as described in this filing.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: