FCC ID 2ADCZ-NWRM1000

2ADCZNWRM1000, 2ADCZ NWRM1000, 2ADCZ-NWRM1000, 2ADCZ-NWRM1OOO, 2ADCZ-NWRMI000

NWave Technologies Inc. Smart Radio Module NWRM1000

An FCC ID is the product ID assigned by the FCC to identify wireless products in the market. The FCC chooses 3 or 5 character "Grantee" codes to identify the business that created the product. For example, the grantee code for FCC ID: 2ADCZ-NWRM1000 is 2ADCZ. The remaining characters of the FCC ID, -NWRM1000, are often associated with the product model, but they can be random. These letters are chosen by the applicant. In addition to the application, the FCC also publishes internal images, external images, user manuals, and test results for wireless devices. They can be under the "exhibits" tab below.

Purchase on Amazon: Smart Radio Module

Application: Smart Radio Module
Equipment Class: DSS - Part 15 Spread Spectrum Transmitter
Short Link: fcc.id/2ADCZ-NWRM1000
Sources: FCC.gov | FCC.report
Registered By: NWave Technologies Inc. - 2ADCZ (United States)

App #	Purpose	Date	Unique ID
1	Original Equipment	2014-11-18	CuGDTxKz+fs9BIbhkRG9Rg==

Operating Frequencies

Device operates within approved frequencies overlapping with the following cellular bands: CDMA 12,800 MHz PAMR DOWN |

Frequency Range	Power Output	Rule Parts	Line Entry
915.875-917.1 MHz	17.02 mW	15C	1

Exhibits

Document	Type	Submitted Available
Users Manual	Users Manual Adobe Acrobat PDF (96 kB)	2014-11-18 2015-05-15
Test Setup Photos	Test Setup Photos Adobe Acrobat PDF (757 kB)	2014-11-18 2015-05-15
Test Report	Test Report Adobe Acrobat PDF (763 kB)	2014-11-18 2014-11-18
RF Exposure Info	RF Exposure Info Adobe Acrobat PDF (88 kB)	2014-11-18 2014-11-18
Internal Photos	Internal Photos Adobe Acrobat PDF (924 kB)	2014-11-18 2015-05-15
ID Label and Location Info	ID Label/Location Info Adobe Acrobat PDF (78 kB)	2014-11-18 2014-11-18
External Photos	External Photos Adobe Acrobat PDF (724 kB)	2014-11-18 2015-05-15
Modular Declaration Letter	Attestation Statements Adobe Acrobat PDF (57 kB)	2014-11-18 2014-11-18
Confidential Request Letter	Cover Letter(s) Adobe Acrobat PDF (67 kB)	2014-11-18 2014-11-18
Schematics	Schematics Adobe Acrobat PDF (121 kB)	2014-11-18
Block Diagram	Block Diagram Adobe Acrobat PDF (119 kB)	2014-11-18
Operational Description	Operational Description Adobe Acrobat PDF (630 kB)	2014-11-18

Correspondence

App #	Document	Date
1	[Re-Sent]Short-Term Confidential Expiration Email generated [May 7 2015]	2015-05-07 15:59:00
1	[Re-Sent]Short-Term Confidential Expiration Email generated [May 7 2015]	2015-05-07 16:09:05

Application Forms

1 (2014-11-18)

Application for Equipment Authorization FCC Form 731 TCB Version

Applicant Information

Applicant's complete, legal business name:	NWave Technologies Inc.
FCC Registration Number (FRN):	0023997836
Alphanumeric FCC ID:	2ADCZNWRM1000
Unique Application Identifier:	CuGDTxKz+fs9BIbhkRG9Rg==
Line one:	1200 International Pkwy.
Line two:	Suite 200
City:	Richardson
State:	Texas
Country:	United States
Zip Code:	75081

TCB Information

TCB Application Email Address:	tcb@hctamerica.com
TCB Scope:	A4: UNII devices & low power transmitters using spread spectrum techniques

FCC ID

Grantee Code:	2ADCZ
Product Code:	-NWRM1000

Person at the applicant's address to receive grant or for contact

Name:	Maria Smith-Brackenridge
Title:	Director

Telephone Number:

214-908-9313

Extension:

Fax Number:	000-000-0000
Email:	msmith@nwavetec.com

Long-Term Confidentiality

Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: Yes

Short-Term Confidentiality

Does short-term confidentiality apply to this application?: Yes

If so, specify the short-term confidentiality release date (MM/DD/YYYY format): 05/15/2015
Note: If no date is supplied, the release date will be set to 45 calendar days past the date of grant.

Software Defined/Cognitive Radio

Is this application for software defined/cognitive radio authorization? No

Equipment Class

Equipment Class: DSS - Part 15 Spread Spectrum Transmitter
Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant):	Smart Radio Module

Related OET KnowledgeDataBase Inquiry

Is there a KDB inquiry associated with this application? No

Modular Equipment

Modular Type: Single Modular Approval

Application Purpose

Application is for: Original Equipment

Composite/Related Equipment

Is the equipment in this application a composite device subject to an additional equipment authorization? No

Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? No

Test Firm Information

Name of test firm and contact person on file with the FCC:

Firm Name: Universal Compliance Labs dba EMCE Engineering

First Name: Bob

Last Name: Cole

Telephone Number:

510-490-4307

Extension:

Fax Number: 510-490-3441

E-mail: bob@universalcompliance.com

Grant Comments

Enter any text that you would like to appear at the bottom of the Grant of Equipment Authorization:
Power listed is the peak conducted output power. This module may be installed only by the OEM or an OEM integrator. This approval is valid when the antenna(s) used for this device in portable configurations is installed in mobile hosts with a minimum antenna to user separation distance of at least 20 cm. Installation in portable host configurations requires additional evaluation and certification. Grantee must provide instructions and coordinate with OEM integrators to determine applicable host configurations to ensure compliance including RF exposure and simultaneous transmission.

Set the grant of this application to be deferred to a specified date:
No

Equipment Authorization Waiver

Is there an equipment authorization waiver associated with this application? No

If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded?: No

WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT (U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE (U.S. CODE, TITLE 47, SECTION 503).

SECTION 5301 (ANTI-DRUG ABUSE) CERTIFICATION:

The applicant must certify that neither the applicant nor any party to the application is subject to a denial of Federal benefits, that include FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. § 862 because of a conviction for possession or distribution of a controlled substance. See 47 CFR 1.2002(b) for the definition of a "party" for these purposes.

Does the applicant or authorized agent so certify? Yes

Applicant/Agent Certification:

I certify that I am authorized to sign this application. All of the statements herein and the exhibits attached hereto, are true and correct to the best of my knowledge and belief. In accepting a Grant of Equipment Authorization as a result of the representations made in this application, the applicant is responsible for (1) labeling the equipment with the exact FCC ID specified in this application, (2) compliance statement labeling pursuant to the applicable rules, and (3) compliance of the equipment with the applicable technical rules. If the applicant is not the actual manufacturer of the equipment, appropriate arrangements have been made with the manufacturer to ensure that production units of this equipment will continue to comply with the FCC's technical requirements.

Authorizing an agent to sign this application, is done solely at the applicant's discretion; however, the applicant remains responsible for all statements in this application.

If an agent has signed this application on behalf of the applicant, a written letter of authorization which includes information to enable the agent to respond to the above section 5301 (Anti-Drug Abuse) Certification statement has been provided by the applicant. It is understood that the letter of authorization must be submitted to the FCC upon request, and that the FCC reserves the right to contact the applicant directly at any time.

Signature of Authorized Person Filing: Maria Smith-Brackenridg

Title of authorized signature: Managing Director

Applications are submitted for FCC ID and Grant requests. Click an above application to view details

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

HCT America LLC
44364 S. Grimmer Blvd.
Fremont, CA 94538

Date of Grant: 11/18/2014

Application Dated: 11/18/2014

NWave Technologies Inc.

1200 International Pkwy.

Suite 200

Richardson, TX 75081

Attention: Maria Smith-Brackenridge , Director

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2ADCZ-NWRM1000

Name of Grantee:	NWave Technologies Inc.

Equipment Class:	Part 15 Spread Spectrum Transmitter
Notes:	Smart Radio Module
Modular Type:	Single Modular

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
	15C	915.875 - 917.1	0.01702

Power listed is the peak conducted output power. This module may be installed only by the OEM or an OEM integrator. This approval is valid when the antenna(s) used for this device in portable configurations is installed in mobile hosts with a minimum antenna to user separation distance of at least 20 cm. Installation in portable host configurations requires additional evaluation and certification. Grantee must provide instructions and coordinate with OEM integrators to determine applicable host configurations to ensure compliance including RF exposure and simultaneous transmission.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

NWave Technologies Inc.
1200 International Pkwy. Suite 200
Richardson, TX 75081
United States