FCC ID 2ADGH-6310

M.2 WIFI Network Card

by Ralinwi Nanjing Electronic Technology Co., Ltd.

Grantee Code: 2ADGH   Product Code: 6310
Latest application date: 2022-06-28

FCC ID Device Details

FCC ID2ADGH-6310
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2ADGH
Product Code6310
Applicant BusinessRalinwi Nanjing Electronic Technology Co., Ltd. 🇨🇳
Related Domains ralinwi.com
Equipment ClassM.2 WIFI Network Card
Test FirmShenzhen DL Testing Technology Co., Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5745-5825 MHzOriginal Equipment2022-06-28
2412-2462 MHzOriginal Equipment2022-06-28

Exhibits

DocumentTypeAvailableFile
User manualUsers Manual2022-06-28PDF 213.7 KB
Internal photosInternal Photos2022-06-28PDF 447.2 KB
External photosExternal Photos2022-06-28PDF 528.3 KB
ID label and locationID Label/Location Info2022-06-28PDF 127.1 KB
Test setup photosTest Setup Photos2022-06-28PDF 350.5 KB
Test reportsTest Report2022-06-28PDF 5.5 MB
Test reportsTest Report2022-06-28PDF 5.2 MB
Model family declarationAttestation Statements2022-06-28PDF 64.7 KB
ConfidentialityCover Letter(s)2022-06-28PDF 135.4 KB
Letter AuthorizationCover Letter(s)2022-06-28PDF 52.3 KB
Modular_Transmitter_ApprovalCover Letter(s)2022-06-28PDF 123.9 KB
Software_Configuration_ControlCover Letter(s)2022-06-28PDF 60.2 KB
RF ExposureRF Exposure Info2022-06-28PDF 175.1 KB
Block Diagram Metadata onlyBlock DiagramPDF 40.7 KB
Schematics Metadata onlySchematicsPDF 108.8 KB
Operational Description Metadata onlyOperational DescriptionPDF 37.2 KB
Secutiry Info. Metadata onlySDR Software/Security InfPDF 223.5 KB

Application Information

Application IDe7fZCRk36YwmMeGt++QcXQ==
Final Action Date2022-06-28
Application PurposeOriginal Equipment
Applicant FRN0025012196
Model6310
Frequency Range5745-5825 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionM.2 WIFI Network Card
Responsible PartyZuokun Liang, product manager, liangzuokun@ralinwi.com , +86-25-68520225
Technical ContactJade Yang, Shenzhen DL Testing Technology Co., Ltd., Jade.yang@dl-cert.com , 400-688-3552
Test FirmJade Yang, Shenzhen DL Testing Technology Co., Ltd., Jade.yang@dl-cert.com , 400-688-3552
TCB Emailelabscert@applus.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentLimited Single Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsLimited Single Modular Approval. Output power listed is conducted. Grantee is responsible for providing specific testing instructions to host manufacturers for additional testing to verify compliance as a composite system. This includes retesting of transmitter module per part 15.31(h) and (k) and verification of compliance with FCC RF Exposure requirements. This module is Limited for host type:Desktop PC, Mode: TPA-23A050200UU01. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end end-Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations..Device is a 2x2 MIMO as is described in the filing. The device contains 20MHz, 40MHz and 80MHz bandwidth.

Applications

Application IDDatePurpose
e7fZCRk36YwmMeGt++QcXQ==2022-06-28Original Equipment
5+lKRH8XrP24cp7rV1tIGQ==2022-06-28Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.140000015CCC, MO
5180-5240 MHz0.14715ECC, MO
5745-5825 MHz0.15215ECC, MO

Grants

TCB Grant - Application e7fZCRk36YwmMeGt++QcXQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  LGAI Technological Center S.A. (APPLUS)
Ronda de la Font del Carme, s/n <BR>P.O. Box 08193,
Barcelona,
Spain
Date of Grant: 06/28/2022

Application Dated: 06/28/2022
Ralinwi Nanjing Electronic Technology Co., Ltd.
3rd Floor,Building B,R&D Block 3,
Xuzhuang Software Park,
Nanjing,
China
 
Attention: Zuokun Liang , product manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ADGH-6310
Name of Grantee:  Ralinwi Nanjing Electronic Technology Co., Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: M.2 WIFI Network Card
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.147  
CC MO 15E 5745.0  -  5825.0 0.152  

Limited Single Modular Approval. Output power listed is conducted. Grantee is responsible for providing specific testing instructions to host manufacturers for additional testing to verify compliance as a composite system. This includes retesting of transmitter module per part 15.31(h) and (k) and verification of compliance with FCC RF Exposure requirements. This module is Limited for host type:Desktop PC, Mode: TPA-23A050200UU01. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end end-Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations..Device is a 2x2 MIMO as is described in the filing. The device contains 20MHz, 40MHz and 80MHz bandwidth.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application e7fZCRk36YwmMeGt++QcXQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Ralinwi Nanjing Electronic Technology Co., Ltd.
3rd Floor,Building B,R&D Block 3, Xuzhuang Software Park,
Nanjing,
China
  Date of Grant: 06/28/2022

Application Dated: 06/28/2022
 
Attention: Zuokun Liang , product manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ADGH-6310
Name of Grantee:  Ralinwi Nanjing Electronic Technology Co., Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: M.2 WIFI Network Card
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.147  
CC MO 15E 5745.0  -  5825.0 0.152  

Limited Single Modular Approval. Output power listed is conducted. Grantee is responsible for providing specific testing instructions to host manufacturers for additional testing to verify compliance as a composite system. This includes retesting of transmitter module per part 15.31(h) and (k) and verification of compliance with FCC RF Exposure requirements. This module is Limited for host type:Desktop PC, Mode: TPA-23A050200UU01. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end end-Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations..Device is a 2x2 MIMO as is described in the filing. The device contains 20MHz, 40MHz and 80MHz bandwidth.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application 5+lKRH8XrP24cp7rV1tIGQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  LGAI Technological Center S.A. (APPLUS)
Ronda de la Font del Carme, s/n <BR>P.O. Box 08193,
Barcelona,
Spain
Date of Grant: 06/28/2022

Application Dated: 06/28/2022
Ralinwi Nanjing Electronic Technology Co., Ltd.
3rd Floor,Building B,R&D Block 3,
Xuzhuang Software Park,
Nanjing,
China
 
Attention: Zuokun Liang , product manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ADGH-6310
Name of Grantee:  Ralinwi Nanjing Electronic Technology Co., Ltd.
Equipment Class: Digital Transmission System
Notes: M.2 WIFI Network Card
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.14  

Limited Single Modular Approval. Output power listed is conducted. Grantee is responsible for providing specific testing instructions to host manufacturers for additional testing to verify compliance as a composite system. This includes retesting of transmitter module per part 15.31(h) and (k) and verification of compliance with FCC RF Exposure requirements. This module is Limited for host type:Desktop PC, Mode: TPA-23A050200UU01. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end end-Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.Device is a 2x2 MIMO as is described in the filing. The device contains 20MHz and 40MHz bandwidth.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application 5+lKRH8XrP24cp7rV1tIGQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Ralinwi Nanjing Electronic Technology Co., Ltd.
3rd Floor,Building B,R&D Block 3, Xuzhuang Software Park,
Nanjing,
China
  Date of Grant: 06/28/2022

Application Dated: 06/28/2022
 
Attention: Zuokun Liang , product manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ADGH-6310
Name of Grantee:  Ralinwi Nanjing Electronic Technology Co., Ltd.
Equipment Class: Digital Transmission System
Notes: M.2 WIFI Network Card
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.14  

Limited Single Modular Approval. Output power listed is conducted. Grantee is responsible for providing specific testing instructions to host manufacturers for additional testing to verify compliance as a composite system. This includes retesting of transmitter module per part 15.31(h) and (k) and verification of compliance with FCC RF Exposure requirements. This module is Limited for host type:Desktop PC, Mode: TPA-23A050200UU01. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end end-Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations.Device is a 2x2 MIMO as is described in the filing. The device contains 20MHz and 40MHz bandwidth.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: