FCC ID 2ADGH-6311

M.2 WIFI Network Card

by Ralinwi Nanjing Electronic Technology Co., Ltd.

Grantee Code: 2ADGH   Product Code: 6311
Latest application date: 2023-10-09

FCC ID Device Details

FCC ID2ADGH-6311
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2ADGH
Product Code6311
Applicant BusinessRalinwi Nanjing Electronic Technology Co., Ltd. 🇨🇳
Related Domains ralinwi.com
Equipment ClassM.2 WIFI Network Card
Test FirmShenzhen DL Testing Technology Co., Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5745-5825 MHzClass II permissive change or modification of presently authorized equipment2023-10-09
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2023-10-09
2412-2462 MHzOriginal Equipment2023-04-20
5180-5240 MHzOriginal Equipment2023-04-20

Exhibits

DocumentTypeAvailableFile
User manualUsers Manual2023-10-09PDF 1.9 MB
User manualUsers Manual2023-04-20PDF 1.2 MB
Internal photosInternal Photos2023-10-09PDF 447.2 KB
External photosExternal Photos2023-10-09PDF 528.3 KB
ID label and locationID Label/Location Info2023-04-20PDF 127.2 KB
Test setup photosTest Setup Photos2023-10-09PDF 355.3 KB
Test setup photosTest Setup Photos2023-04-20PDF 902.5 KB
Test reportsTest Report2023-10-09PDF 2.4 MB
Antenna specificationsTest Report2023-04-20PDF 1.9 MB
Test reportsTest Report2023-04-20PDF 3.1 MB
Test reportsTest Report2023-04-20PDF 5.4 MB
Test reports A-1Test Report2023-04-20PDF 5.7 MB
Test reports A-2Test Report2023-04-20PDF 5.7 MB
Test reports A-3Test Report2023-04-20PDF 5.5 MB
Test reports Annex2-1Test Report2023-04-20PDF 4.2 MB
Test reports Annex2-2Test Report2023-04-20PDF 4.2 MB
Test reports Annex2-3Test Report2023-04-20PDF 3.7 MB
Test reports Annex3-1Test Report2023-04-20PDF 5.2 MB
Test reports Annex3-2Test Report2023-04-20PDF 5.2 MB
Test reports B2B3Test Report2023-04-20PDF 3.5 MB
Test reports DFSTest Report2023-04-20PDF 2 MB
Attestation StatementsAttestation Statements2023-10-09PDF 169.9 KB
Family declarationAttestation Statements2023-10-09PDF 89.7 KB
US Agent LetterAttestation Statements2023-10-09PDF 115.3 KB
Attestation StatementsAttestation Statements2023-04-20PDF 136.7 KB
Family declarationAttestation Statements2023-04-20PDF 64.8 KB
US Agent LetterAttestation Statements2023-04-20PDF 141.8 KB
C2PC letterCover Letter(s)2023-10-09PDF 50.9 KB
ConfidentialityCover Letter(s)2023-10-09PDF 143.1 KB
Letter AuthorizationCover Letter(s)2023-10-09PDF 52.1 KB
Modular Transmitter ApprovalCover Letter(s)2023-10-09PDF 146.1 KB
Software Configuration ControlCover Letter(s)2023-10-09PDF 60.1 KB
ConfidentialityCover Letter(s)2023-04-20PDF 135.4 KB
Modular Transmitter ApprovalCover Letter(s)2023-04-20PDF 128.6 KB
Software Configuration ControlCover Letter(s)2023-04-20PDF 62.5 KB
RF ExposureRF Exposure Info2023-10-09PDF 173.3 KB
Block Diagram Metadata onlyBlock DiagramPDF 40.1 KB
Schematics Metadata onlySchematicsPDF 441.1 KB
Schematics Metadata onlySchematicsPDF 260.3 KB
Operational Description Metadata onlyOperational DescriptionPDF 103.4 KB
Pre-PAG (Tracking Number 974664) Metadata onlyOperational DescriptionPDF 301.4 KB
Security Info. Metadata onlySDR Software/Security InfPDF 223.6 KB

Application Information

Application IDLtP1lxO9ziIF2elux6qkvg==
Final Action Date2023-10-09
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0025012196
Model6311
Frequency Range5745-5825 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionM.2 WIFI Network Card
Responsible PartyZuokun Liang, product manager, liangzuokun@ralinwi.com , +86-25-68520225
Technical ContactJade Yang, Shenzhen DL Testing Technology Co., Ltd., Jade.yang@dl-cert.com , 400-688-3552
Test FirmJade Yang, Shenzhen DL Testing Technology Co., Ltd., Jade.yang@dl-cert.com , 400-688-3552
TCB Emailelabscert@applus.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsCIIPC due to change the modular type to single modular. Single Modular Approval. Device is an 802.11a/n/ac/ax in a 2x2 MIMO configuration as described in this filing. Output power listed is conducted. Grantee is responsible for providing specific testing instructions to host manufacturers for additional testing to verify compliance as a composite system. This includes retesting of transmitter module per part 15.31(h) and (k) and verification of compliance with FCC RF Exposure requirements. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This device complies with the Dynamic Frequency Selection (DFS) requirements of KDB 905462 D03 as a Client only without Radar Detection.This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided.The device contains 20MHz, 40MHz and 80MHz bandwidth.

Applications

Application IDDatePurpose
LtP1lxO9ziIF2elux6qkvg==2023-10-09Class II permissive change or modification of presently authorized equipment
5uG/+U0iz68au/KHWUWhUg==2023-10-09Class II permissive change or modification of presently authorized equipment
ww2jqsUv1sQNEn7PnWY9ug==2023-04-20Original Equipment
WqFapR2q+Aboea2uacCgmA==2023-04-20Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.140000015CCC, MO
5180-5240 MHz0.146915ECC, MO
5260-5320 MHz0.148615ECC, MO, ND
5500-5700 MHz0.129715ECC, MO, ND
5745-5825 MHz0.152415ECC, MO

Grants

TCB Grant - Application ww2jqsUv1sQNEn7PnWY9ug==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  LGAI Technological Center S.A. (APPLUS)
Ronda de la Font del Carme, s/n <BR>P.O. Box 08193,
Barcelona,
Spain
Date of Grant: 04/20/2023

Application Dated: 04/03/2023
Ralinwi Nanjing Electronic Technology Co., Ltd.
3rd Floor,Building B,R&D Block 3,
Xuzhuang Software Park,
Nanjing,
China
 
Attention: Zuokun Liang , product manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ADGH-6311
Name of Grantee:  Ralinwi Nanjing Electronic Technology Co., Ltd.
Equipment Class: Digital Transmission System
Notes: M.2 WIFI Network Card
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.14  

Limited Single Modular Approval.Device is an 802.11b/g/n/ax device in a 2x2 MIMO configuration as described in this filing.Output power listed is conducted power.The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures.This module can only be used with a host antenna design in strict compliance with the OEM instructions provided. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the Grantee.The device contains 20MHz and 40MHz bandwidth.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application ww2jqsUv1sQNEn7PnWY9ug==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Ralinwi Nanjing Electronic Technology Co., Ltd.
3rd Floor,Building B,R&D Block 3, Xuzhuang Software Park,
Nanjing,
China
  Date of Grant: 04/20/2023

Application Dated: 04/03/2023
 
Attention: Zuokun Liang , product manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ADGH-6311
Name of Grantee:  Ralinwi Nanjing Electronic Technology Co., Ltd.
Equipment Class: Digital Transmission System
Notes: M.2 WIFI Network Card
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.14  

Limited Single Modular Approval.Device is an 802.11b/g/n/ax device in a 2x2 MIMO configuration as described in this filing.Output power listed is conducted power.The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures.This module can only be used with a host antenna design in strict compliance with the OEM instructions provided. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the Grantee.The device contains 20MHz and 40MHz bandwidth.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application WqFapR2q+Aboea2uacCgmA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  LGAI Technological Center S.A. (APPLUS)
Ronda de la Font del Carme, s/n <BR>P.O. Box 08193,
Barcelona,
Spain
Date of Grant: 04/20/2023

Application Dated: 04/03/2023
Ralinwi Nanjing Electronic Technology Co., Ltd.
3rd Floor,Building B,R&D Block 3,
Xuzhuang Software Park,
Nanjing,
China
 
Attention: Zuokun Liang , product manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ADGH-6311
Name of Grantee:  Ralinwi Nanjing Electronic Technology Co., Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: M.2 WIFI Network Card
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.1469  
CC MO ND 15E 5260.0  -  5320.0 0.1486  
CC MO ND 15E 5500.0  -  5700.0 0.1297  
CC MO 15E 5745.0  -  5825.0 0.1524  

Limited Single Modular Approval.Device is an 802.11a/n/ac/ax device in a 2x2 MIMO configuration as described in this filing. Output power listed is conducted power.The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures.This module can only be used with a host antenna design in strict compliance with the OEM instructions provided. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the Grantee.This device complies with the Dynamic Frequency Selection (DFS) requirements of KDB 905462 D03 as a Client only without Radar Detection.The device contains 20MHz, 40MHz and 80MHz bandwidth.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application WqFapR2q+Aboea2uacCgmA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Ralinwi Nanjing Electronic Technology Co., Ltd.
3rd Floor,Building B,R&D Block 3, Xuzhuang Software Park,
Nanjing,
China
  Date of Grant: 04/20/2023

Application Dated: 04/03/2023
 
Attention: Zuokun Liang , product manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ADGH-6311
Name of Grantee:  Ralinwi Nanjing Electronic Technology Co., Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: M.2 WIFI Network Card
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.1469  
CC MO ND 15E 5260.0  -  5320.0 0.1486  
CC MO ND 15E 5500.0  -  5700.0 0.1297  
CC MO 15E 5745.0  -  5825.0 0.1524  

Limited Single Modular Approval.Device is an 802.11a/n/ac/ax device in a 2x2 MIMO configuration as described in this filing. Output power listed is conducted power.The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures.This module can only be used with a host antenna design in strict compliance with the OEM instructions provided. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. The Grantee is responsible for providing the documentation required for modular use. The responsibility for the use of this module, in all configurations utilized or contemplated, remains with the Grantee.This device complies with the Dynamic Frequency Selection (DFS) requirements of KDB 905462 D03 as a Client only without Radar Detection.The device contains 20MHz, 40MHz and 80MHz bandwidth.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application LtP1lxO9ziIF2elux6qkvg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  LGAI Technological Center S.A. (APPLUS)
Ronda de la Font del Carme, s/n <BR>P.O. Box 08193,
Barcelona,
Spain
Date of Grant: 10/09/2023

Application Dated: 10/07/2023
Ralinwi Nanjing Electronic Technology Co., Ltd.
3rd Floor,Building B,R&D Block 3,
Xuzhuang Software Park,
Nanjing,
China
 
Attention: Zuokun Liang , product manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ADGH-6311
Name of Grantee:  Ralinwi Nanjing Electronic Technology Co., Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: M.2 WIFI Network Card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.1469  
CC MO ND 15E 5260.0  -  5320.0 0.1486  
CC MO ND 15E 5500.0  -  5700.0 0.1297  
CC MO 15E 5745.0  -  5825.0 0.1524  

CIIPC due to change the modular type to single modular. Single Modular Approval. Device is an 802.11a/n/ac/ax in a 2x2 MIMO configuration as described in this filing. Output power listed is conducted. Grantee is responsible for providing specific testing instructions to host manufacturers for additional testing to verify compliance as a composite system. This includes retesting of transmitter module per part 15.31(h) and (k) and verification of compliance with FCC RF Exposure requirements. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This device complies with the Dynamic Frequency Selection (DFS) requirements of KDB 905462 D03 as a Client only without Radar Detection.This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided.The device contains 20MHz, 40MHz and 80MHz bandwidth.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application LtP1lxO9ziIF2elux6qkvg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Ralinwi Nanjing Electronic Technology Co., Ltd.
3rd Floor,Building B,R&D Block 3, Xuzhuang Software Park,
Nanjing,
China
  Date of Grant: 10/09/2023

Application Dated: 10/07/2023
 
Attention: Zuokun Liang , product manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ADGH-6311
Name of Grantee:  Ralinwi Nanjing Electronic Technology Co., Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: M.2 WIFI Network Card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15E 5180.0  -  5240.0 0.1469  
CC MO ND 15E 5260.0  -  5320.0 0.1486  
CC MO ND 15E 5500.0  -  5700.0 0.1297  
CC MO 15E 5745.0  -  5825.0 0.1524  

CIIPC due to change the modular type to single modular. Single Modular Approval. Device is an 802.11a/n/ac/ax in a 2x2 MIMO configuration as described in this filing. Output power listed is conducted. Grantee is responsible for providing specific testing instructions to host manufacturers for additional testing to verify compliance as a composite system. This includes retesting of transmitter module per part 15.31(h) and (k) and verification of compliance with FCC RF Exposure requirements. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This device complies with the Dynamic Frequency Selection (DFS) requirements of KDB 905462 D03 as a Client only without Radar Detection.This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided.The device contains 20MHz, 40MHz and 80MHz bandwidth.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application 5uG/+U0iz68au/KHWUWhUg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  LGAI Technological Center S.A. (APPLUS)
Ronda de la Font del Carme, s/n <BR>P.O. Box 08193,
Barcelona,
Spain
Date of Grant: 10/09/2023

Application Dated: 10/07/2023
Ralinwi Nanjing Electronic Technology Co., Ltd.
3rd Floor,Building B,R&D Block 3,
Xuzhuang Software Park,
Nanjing,
China
 
Attention: Zuokun Liang , product manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ADGH-6311
Name of Grantee:  Ralinwi Nanjing Electronic Technology Co., Ltd.
Equipment Class: Digital Transmission System
Notes: M.2 WIFI Network Card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.14  

CIIPC due to change the modular type to single modular. Single Modular Approval. Device is an 802.11b/g/n/ax in a 2x2 MIMO configuration as described in this filing. Output power listed is conducted. Grantee is responsible for providing specific testing instructions to host manufacturers for additional testing to verify compliance as a composite system. This includes retesting of transmitter module per part 15.31(h) and (k) and verification of compliance with FCC RF Exposure requirements. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided.The device contains 20MH and 40MHz bandwidth.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application 5uG/+U0iz68au/KHWUWhUg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Ralinwi Nanjing Electronic Technology Co., Ltd.
3rd Floor,Building B,R&D Block 3, Xuzhuang Software Park,
Nanjing,
China
  Date of Grant: 10/09/2023

Application Dated: 10/07/2023
 
Attention: Zuokun Liang , product manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ADGH-6311
Name of Grantee:  Ralinwi Nanjing Electronic Technology Co., Ltd.
Equipment Class: Digital Transmission System
Notes: M.2 WIFI Network Card
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.14  

CIIPC due to change the modular type to single modular. Single Modular Approval. Device is an 802.11b/g/n/ax in a 2x2 MIMO configuration as described in this filing. Output power listed is conducted. Grantee is responsible for providing specific testing instructions to host manufacturers for additional testing to verify compliance as a composite system. This includes retesting of transmitter module per part 15.31(h) and (k) and verification of compliance with FCC RF Exposure requirements. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance.This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided.The device contains 20MH and 40MHz bandwidth.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: