FCC ID 2ADHKR34M

Low Power LoRa Sub-1GHz Module

by Microchip Technology Inc.

Grantee Code: 2ADHK   Product Code: R34M
Latest application date: 2020-08-17

FCC ID Device Details

FCC ID2ADHKR34M
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2ADHK
Product CodeR34M
Applicant BusinessMicrochip Technology Inc. 🇺🇸
Related Domains microchip.com
Equipment ClassLow Power LoRa Sub-1GHz Module
Test FirmTUV Rheinland Taiwan Ltd. Taipei Testing Lab.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
902.3-927.5 MHzOriginal Equipment2020-08-17
903-927.5 MHzOriginal Equipment2020-08-17

Exhibits

DocumentTypeAvailableFile
User manualUsers Manual2020-11-10PDF 266.2 KB
Internal PhotosInternal Photos2020-11-10PDF 861.8 KB
Internal photoInternal Photos2020-11-10PDF 861.8 KB
External PhotosExternal Photos2020-11-10PDF 1.4 MB
Label and label locationID Label/Location Info2020-08-17PDF 393.7 KB
Setup PhotosTest Setup Photos2020-11-10PDF 498.4 KB
Test Setup PhotoTest Setup Photos2020-11-10PDF 498.4 KB
60390716 001Test Report2020-08-17PDF 1.4 MB
60390716 001 Appendix DTest Report2020-08-17PDF 4.2 MB
60390718 001 Appendix DTest Report2020-08-17PDF 4.5 MB
60390718 001HybridTest Report2020-08-17PDF 1.6 MB
Agency AuthorizationCover Letter(s)2020-08-17PDF 73.7 KB
Confidentiality Letter for FCCCover Letter(s)2020-08-17PDF 133.7 KB
Confidentiality letterCover Letter(s)2020-08-17PDF 133.7 KB
Declaration of Similarity LetterCover Letter(s)2020-08-17PDF 147.1 KB
Modular approval Request letterCover Letter(s)2020-08-17PDF 99.9 KB
RF exposure DTSRF Exposure Info2020-08-17PDF 126.6 KB
RF exposure HybridRF Exposure Info2020-08-17PDF 126.6 KB
Block Diagram Metadata onlyBlock DiagramPDF 224.9 KB
Schematic Metadata onlySchematicsPDF 558.1 KB
Schematics Metadata onlySchematicsPDF 558.1 KB
Antenna spec 1 Metadata onlyOperational DescriptionPDF 325.2 KB
Antenna spec 2 Metadata onlyOperational DescriptionPDF 1.5 MB
Antenna spec 3 Metadata onlyOperational DescriptionPDF 531.5 KB
Antenna spec 4 Metadata onlyOperational DescriptionPDF 503.5 KB
Antenna spec 5 Metadata onlyOperational DescriptionPDF 461.1 KB
Antenna spec 6 Metadata onlyOperational DescriptionPDF 400.6 KB
Antenna spec 7 Metadata onlyOperational DescriptionPDF 1,008.1 KB
Antenna spec 8 Metadata onlyOperational DescriptionPDF 391.2 KB
Operation Description Metadata onlyOperational DescriptionPDF 136 KB
Antenna spec 1 Metadata onlyParts List/Tune Up InfoPDF 325.2 KB
BOM Metadata onlyParts List/Tune Up InfoPDF 41.2 KB

Application Information

Application IDv3TVU4DIoZUzm41KBqxBvQ==
Final Action Date2020-08-17
Application PurposeOriginal Equipment
Applicant FRN0001596279
ModelR34M
Frequency Range902.3-927.5 MHz
Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
Device DescriptionLow Power LoRa Sub-1GHz Module
Responsible PartySteve Caldwell, Vice President, steve.caldwell@microchip.com , 480-792-7200
Test FirmKenji Lin, TUV Rheinland Taiwan Ltd. Taipei Testing Lab., KenjiST.Lin@tuv.com , +886-2-2172-7000
TCB EmailFCB@US.TUV.COM
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date11/10/2020
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsSingle Module Approval. Output power listed is conducted. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 2 cm and any additional testing and authorization process as required. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369.

Applications

Application IDDatePurpose
v3TVU4DIoZUzm41KBqxBvQ==2020-08-17Original Equipment
WrcFaCmNnuYgm+iZFote1A==2020-08-17Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
902.3-927.5 MHz0.059000015CCC
903-927.5 MHz0.055600015CCC

Grants

TCB Grant - Application WrcFaCmNnuYgm+iZFote1A==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  TUV Rheinland of North America, Inc.
1279 Quarry Lane Suite A
Pleasanton, CA 94566
Date of Grant: 08/17/2020

Application Dated: 08/10/2020
Microchip Technology Inc.
2355 West Chandler Blvd.
CHANDLER, AZ 85224-6199
 
Attention: Steve Caldwell , Vice President

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ADHKR34M
Name of Grantee:  Microchip Technology Inc.
Equipment Class: Digital Transmission System
Notes: Low Power LoRa Sub-1GHz Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 903.0  -  927.5 0.0556  

Single Module Approval. Output power listed is conducted. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 2 cm and any additional testing and authorization process as required. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application WrcFaCmNnuYgm+iZFote1A==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Microchip Technology Inc.
2355 West Chandler Blvd.
CHANDLER, AZ 85224-6199
United States
  Date of Grant: 08/17/2020

Application Dated: 08/10/2020
 
Attention: Steve Caldwell , Vice President

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ADHKR34M
Name of Grantee:  Microchip Technology Inc.
Equipment Class: Digital Transmission System
Notes: Low Power LoRa Sub-1GHz Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 903.0  -  927.5 0.0556  

Single Module Approval. Output power listed is conducted. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 2 cm and any additional testing and authorization process as required. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application v3TVU4DIoZUzm41KBqxBvQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  TUV Rheinland of North America, Inc.
1279 Quarry Lane Suite A
Pleasanton, CA 94566
Date of Grant: 08/17/2020

Application Dated: 08/10/2020
Microchip Technology Inc.
2355 West Chandler Blvd.
CHANDLER, AZ 85224-6199
 
Attention: Steve Caldwell , Vice President

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ADHKR34M
Name of Grantee:  Microchip Technology Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Low Power LoRa Sub-1GHz Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 902.3  -  927.5 0.059  

Single Module Approval. Output power listed is conducted. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 2 cm and any additional testing and authorization process as required. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application v3TVU4DIoZUzm41KBqxBvQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Microchip Technology Inc.
2355 West Chandler Blvd.
CHANDLER, AZ 85224-6199
United States
  Date of Grant: 08/17/2020

Application Dated: 08/10/2020
 
Attention: Steve Caldwell , Vice President

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ADHKR34M
Name of Grantee:  Microchip Technology Inc.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Low Power LoRa Sub-1GHz Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 902.3  -  927.5 0.059  

Single Module Approval. Output power listed is conducted. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 2 cm and any additional testing and authorization process as required. The host integrator must follow the integration instructions provided by the module manufacturer and ensure that the composite-system end product complies with the FCC requirements by a technical assessment or evaluation to the FCC rules and to KDB Publication 996369.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: