FCC ID 2ADHKWFI32E02

Wireless MCU Module with IEEE 802.11 b/g/n

by Microchip Technology Inc.

Grantee Code: 2ADHK   Product Code: WFI32E02
Latest application date: 2023-08-14

FCC ID Device Details

FCC ID2ADHKWFI32E02
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2ADHK
Product CodeWFI32E02
Applicant BusinessMicrochip Technology Inc. 🇺🇸
Related Domains microchip.com
Equipment ClassWireless MCU Module with IEEE 802.11 b/g/n
Test FirmTUV Rheinland Taiwan Ltd. Taipei Testing Lab.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzOriginal Equipment2023-08-14

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2024-02-08PDF 440.7 KB
Internal PhotosInternal Photos2024-02-08PDF 4.9 MB
External PhotosExternal Photos2024-02-08PDF 3.5 MB
Product Label and LocationID Label/Location Info2023-08-14PDF 168 KB
Test Setup PhotosTest Setup Photos2024-02-08PDF 674.8 KB
FCC Test Report_2.4G WLAN_Part 1 of 2Test Report2023-08-14PDF 3.4 MB
FCC Test Report_2.4G WLAN_Part 2 of 2Test Report2023-08-14PDF 5 MB
Applicant as Agent Letter of AttestationAttestation Statements2023-08-14PDF 219.6 KB
Not Covered Entity Applicant AttestationAttestation Statements2023-08-14PDF 179.3 KB
Not Covered Equipment AttestationAttestation Statements2023-08-14PDF 180.9 KB
Agency LetterCover Letter(s)2023-08-14PDF 258.4 KB
Confidentiality LetterCover Letter(s)2023-08-14PDF 240.2 KB
FCC Modular approval Request letterCover Letter(s)2023-08-14PDF 189.2 KB
Model Declaration LetterCover Letter(s)2023-08-14PDF 214.9 KB
Ant Gain Info_No1_RFA-02-L2H1Parts List/Tune Up Info2023-08-14PDF 101.6 KB
Ant Gain Info_No2_RFA-02-C2H1-D034Parts List/Tune Up Info2023-08-14PDF 233.2 KB
Ant Gain Info_No4_PI_RFDPA870920IMLB301Parts List/Tune Up Info2023-08-14PDF 347.4 KB
Ant Gain Info_No5_PI_RFDPA870920IMAB302Parts List/Tune Up Info2023-08-14PDF 420.2 KB
Ant Gain Info_No6_PI_RFDPA870920IMAB305Parts List/Tune Up Info2023-08-14PDF 580 KB
Ant Gain Info_No7_ASC_RFDPA870910IMAB308Parts List/Tune Up Info2023-08-14PDF 425.5 KB
Ant Gain Info_No8_RFA-02-C2M2Parts List/Tune Up Info2023-08-14PDF 719.4 KB
Ant Gain Info_No9_Acc-RN-SMA-S-RP-DSParts List/Tune Up Info2023-08-14PDF 303.5 KB
Antenna Gain Info_No3_RFA-02-D3Parts List/Tune Up Info2023-08-14PDF 416.6 KB
FCC RF Exposure InfoRF Exposure Info2023-08-14PDF 865.1 KB
Block Diagram Metadata onlyBlock DiagramPDF 242.9 KB
Schematics Metadata onlySchematicsPDF 596.3 KB
Operational Description Metadata onlyOperational DescriptionPDF 237 KB
Parts List Metadata onlyParts List/Tune Up InfoPDF 422.6 KB

Application Information

Application IDqWZ4hIDZ+6xGXVI8ME+9Nw==
Final Action Date2023-08-14
Application PurposeOriginal Equipment
Applicant FRN0001596279
ModelWFI32E02
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionWireless MCU Module with IEEE 802.11 b/g/n
Responsible PartyHRUSHIKESH VASUKI, Director, Business Unit General Manager, Wireless, rishi.vasuki@microchip.com , 480-792-0762
Technical ContactHRUSHIKESH VASUKI, Microchip Technology Inc., rishi.vasuki@microchip.com , 85224-6199
Test FirmIvan Hsieh, TUV Rheinland Taiwan Ltd. Taipei Testing Lab., IvanM.Hsieh@tuv.com , +886 2-2172-7000
TCB Emailtcb-hotline@tuv.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date02/08/2024
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsSingle Modular Approval. Output power listed is conducted power. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device.

Applications

Application IDDatePurpose
qWZ4hIDZ+6xGXVI8ME+9Nw==2023-08-14Original Equipment

Equipment Authorization

FrequencyOutputRules
2412-2462 MHz0.374100015C

Grants

TCB Grant - Application qWZ4hIDZ+6xGXVI8ME+9Nw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  TUV Rheinland of North America, Inc.
1279 Quarry Lane Suite A
Pleasanton, CA 94566
Date of Grant: 08/14/2023

Application Dated: 08/14/2023
Microchip Technology Inc.
2355 West Chandler Blvd.
CHANDLER, AZ 85224-6199
 
Attention: HRUSHIKESH VASUKI , Director, Business Unit General Manager, Wireles

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ADHKWFI32E02
Name of Grantee:  Microchip Technology Inc.
Equipment Class: Digital Transmission System
Notes: Wireless MCU Module with IEEE 802.11 b/g/n
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.3741  

Single Modular Approval. Output power listed is conducted power. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device.

EAS Grant - Application qWZ4hIDZ+6xGXVI8ME+9Nw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Microchip Technology Inc.
2355 West Chandler Blvd.
CHANDLER, AZ 85224-6199
United States
  Date of Grant: 08/14/2023

Application Dated: 08/14/2023
 
Attention: HRUSHIKESH VASUKI , Director, Business Unit General Manager, Wireles

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ADHKWFI32E02
Name of Grantee:  Microchip Technology Inc.
Equipment Class: Digital Transmission System
Notes: Wireless MCU Module with IEEE 802.11 b/g/n
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.3741  

Single Modular Approval. Output power listed is conducted power. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance. OEM integrators and end-users must be provided with transmitter operation conditions for satisfying RF exposure compliance. Only those antennas tested with the device or similar antennas with equal or lesser gain may be used with this transmitter. OEM integrators must be provided with antenna installation instructions. The OEM integrators must be instructed to ensure that the end user has no manual instructions to remove or install the device.



Mail To: