FCC ID 2ADKG-CW-601-3G
OBD Telematics Dongle
by Shenzhen Chainway ITS Co., Ltd.
Grantee Code: 2ADKG Product Code: CW6013G
Latest application date: 2017-04-14
Device Images
FCC ID Device Details
| FCC ID | 2ADKG-CW-601-3G |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2ADKG |
| Product Code | CW6013G |
| Applicant Business | Shenzhen Chainway ITS Co., Ltd. 🇨🇳 |
| Related Domains |  chainwaytsp.com |
| Equipment Class | OBD Telematics Dongle |
| Test Firm | Shenzhen Huatongwei International Insp. Co., Ltd |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2412-2462 MHz | Original Equipment | 2017-04-14 |
| 826.4-846.6 MHz | Original Equipment | 2017-04-14 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2017-04-14 | PDF 352.6 KB |
| Internal Photos | Internal Photos | 2017-04-14 | PDF 717.3 KB |
| External Photos | External Photos | 2017-04-14 | PDF 397.4 KB |
| Label | ID Label/Location Info | 2017-04-14 | PDF 395 KB |
| Test Set Up | Test Setup Photos | 2017-04-14 | PDF 170.5 KB |
| Test Set Up | Test Setup Photos | 2017-04-14 | PDF 560 KB |
| Test Report | Test Report | 2017-04-14 | PDF 1.2 MB |
| Test Report | Test Report | 2017-04-14 | PDF 2.5 MB |
| Authorization | Cover Letter(s) | 2017-04-14 | PDF 13 KB |
| Confidentiality | Cover Letter(s) | 2017-04-14 | PDF 16.8 KB |
| RF Safety Report | RF Exposure Info | 2017-04-14 | PDF 100.1 KB |
| Block Diagram Metadata only | Block Diagram | PDF 19.2 KB | |
| Schematics Metadata only | Schematics | PDF 586.4 KB | |
| Operational Description Metadata only | Operational Description | PDF 64.3 KB | |
| Parts List Metadata only | Parts List/Tune Up Info | PDF 98.9 KB | |
| Tune Up Procedures Metadata only | Parts List/Tune Up Info | PDF 39.1 KB |
Application Information
| Application ID | pglw/Osw4JtU7E8/J8mzDg== |
|---|---|
| Final Action Date | 2017-04-14 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0024074999 |
| Model | CW-601-3G |
| Frequency Range | 2412-2462 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | OBD Telematics Dongle |
| Responsible Party | Shengni Zhou, Certification Engineer, zhoushengni@chainwaytsp.com , 86-755-33633930 |
| Test Firm | Moffy Yu, Shenzhen Huatongwei International Insp. Co., Ltd, moffy.yu@szhtw.com.cn  , 86-755-26748078 |
| TCB Email | stuart.beck@nemko.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provided separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| pglw/Osw4JtU7E8/J8mzDg== | 2017-04-14 | Original Equipment |
| 7p3FtEbpfon8vkvI0YjWSw== | 2017-04-14 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application pglw/Osw4JtU7E8/J8mzDg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko North America, INC. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 04/14/2017 Application Dated: 04/10/2017 |
| Shenzhen Chainway ITS Co., Ltd. |
| R&D Building A 601, Tsinghua Information Harbor, |
| Hi-Tech Industrial Park North, Shenzhen, China |
| Shenzhen, China |
| Attention: Shengni Zhou , Certification Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ADKG-CW-601-3G |
| Name of Grantee: | Shenzhen Chainway ITS Co., Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | OBD Telematics Dongle |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.1059 |
| Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provided separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
EAS Grant - Application pglw/Osw4JtU7E8/J8mzDg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Shenzhen Chainway ITS Co., Ltd. R&D Building A 601, Tsinghua Information Harbor, Hi-Tech Industrial Park North, Shenzhen, China Shenzhen, China |
Date of Grant: 04/14/2017 Application Dated: 04/10/2017 |
| Attention: Shengni Zhou , Certification Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ADKG-CW-601-3G |
| Name of Grantee: | Shenzhen Chainway ITS Co., Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | OBD Telematics Dongle |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.1059 |
| Output power listed is conducted. The antenna(s) used for this transmitter must be installed to provided separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Nemko North America, INC. 303 River Road Ottawa, Ontario, K1V 1H2 Canada |
Date of Grant: 04/14/2017 Application Dated: 04/11/2017 |
| Shenzhen Chainway ITS Co., Ltd. |
| R&D Building A 601, Tsinghua Information Harbor, |
| Hi-Tech Industrial Park North, Shenzhen, China |
| Shenzhen, China |
| Attention: Shengni Zhou , Certification Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ADKG-CW-601-3G |
| Name of Grantee: | Shenzhen Chainway ITS Co., Ltd. |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | OBD Telematics Dongle |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 826.4 - 846.6 | 0.1879 | 0.02 PM | 4M15F9W | |
| 24E | 1852.4 - 1907.6 | 0.1567 | 0.03 PM | 4M17F9W |
| Output power listed is ERP for below 1GHz, EIRP for above 1GHz. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with accepted multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device contains functions that are not operational in the U.S. Territories. This filing is only applicable for U.S. operations. |
EAS Grant - Application 7p3FtEbpfon8vkvI0YjWSw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Shenzhen Chainway ITS Co., Ltd. R&D Building A 601, Tsinghua Information Harbor, Hi-Tech Industrial Park North, Shenzhen, China Shenzhen, China |
Date of Grant: 04/14/2017 Application Dated: 04/11/2017 |
| Attention: Shengni Zhou , Certification Engineer |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ADKG-CW-601-3G |
| Name of Grantee: | Shenzhen Chainway ITS Co., Ltd. |
| Equipment Class: | PCS Licensed Transmitter |
| Notes: | OBD Telematics Dongle |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 22H | 826.4 - 846.6 | 0.1879 | 0.02 PM | 4M15F9W | |
| 24E | 1852.4 - 1907.6 | 0.1567 | 0.03 PM | 4M17F9W |
| Output power listed is ERP for below 1GHz, EIRP for above 1GHz. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with accepted multi-transmitter product procedures. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. This device contains functions that are not operational in the U.S. Territories. This filing is only applicable for U.S. operations. |
| Mail To: |