FCC ID 2ADLL-RGB001

PCBA COMMUNICATION MODULE

by Broan-NuTone LLC

Grantee Code: 2ADLL   Product Code: RGB001
Latest application date: 2019-04-12

FCC ID Device Details

FCC ID2ADLL-RGB001
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2ADLL
Product CodeRGB001
Applicant BusinessBroan-NuTone LLC 🇺🇸
Related Domains broan.com
Equipment ClassPCBA COMMUNICATION MODULE
Test FirmBay Area Compliance Laboratories Corp.(Dongguan)

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzOriginal Equipment2019-04-12

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2019-05-27PDF 452.1 KB
Int PhotosInternal Photos2019-05-27PDF 638.3 KB
Ext PhotosExternal Photos2019-05-27PDF 240.4 KB
FCC ID LabelID Label/Location Info2019-04-12PDF 423.7 KB
Setup PhotosTest Setup Photos2019-05-27PDF 177.9 KB
Test ReportTest Report2019-04-12PDF 727.6 KB
Confidentiality LetterCover Letter(s)2019-04-12PDF 81 KB
LMA LetterCover Letter(s)2019-04-12PDF 87.1 KB
POACover Letter(s)2019-04-12PDF 74.4 KB
Block Diagram Metadata onlyBlock DiagramPDF 72.7 KB
Schematics Metadata onlySchematicsPDF 100.4 KB
Operation Description Metadata onlyOperational DescriptionPDF 31.7 KB

Application Information

Application IDSSpy/qRz06viJWlEam3AYQ==
Final Action Date2019-04-12
Application PurposeOriginal Equipment
Applicant FRN0024082695
ModelRGB001
Frequency Range2402-2480 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionPCBA COMMUNICATION MODULE
Responsible PartyDarren McArthur, Principal Regulatory Engineer, darren.mcarthur@broan.com , 262-673-8584
Test FirmDavid Zhang, Bay Area Compliance Laboratories Corp.(Dongguan), qa.dg@baclcorp.com , 0086 0769 86858888
TCB Emailbacl.regulatory@baclcorp.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date05/27/2019
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentLimited Single Modular Approval
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsLimited Modular Approval. Output power listed is conducted. This transmitter is approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This grant is valid only when the module is sold to OEM or OEM integrator. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. The integrator must be provided with specific information required to satisfy RF exposure compliance for final host devices and installations. Compliance of this device in all final host configurations is the responsibility of the Grantee. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application.

Applications

Application IDDatePurpose
SSpy/qRz06viJWlEam3AYQ==2019-04-12Original Equipment

Equipment Authorization

FrequencyOutputRules
2402-2480 MHz0.002000015C

Grants

TCB Grant - Application SSpy/qRz06viJWlEam3AYQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratory Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
Date of Grant: 04/12/2019

Application Dated: 04/12/2019
Broan-NuTone LLC
926 West State Street
Hartford, WI 53027
 
Attention: Darren McArthur , Principal Regulatory Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ADLL-RGB001
Name of Grantee:  Broan-NuTone LLC
Equipment Class: Digital Transmission System
Notes: PCBA COMMUNICATION MODULE
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.002  

Limited Modular Approval. Output power listed is conducted. This transmitter is approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This grant is valid only when the module is sold to OEM or OEM integrator. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. The integrator must be provided with specific information required to satisfy RF exposure compliance for final host devices and installations. Compliance of this device in all final host configurations is the responsibility of the Grantee. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application.

EAS Grant - Application SSpy/qRz06viJWlEam3AYQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Broan-NuTone LLC
926 West State Street
Hartford, WI 53027
United States
  Date of Grant: 04/12/2019

Application Dated: 04/12/2019
 
Attention: Darren McArthur , Principal Regulatory Engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ADLL-RGB001
Name of Grantee:  Broan-NuTone LLC
Equipment Class: Digital Transmission System
Notes: PCBA COMMUNICATION MODULE
Modular Type: Limited Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.002  

Limited Modular Approval. Output power listed is conducted. This transmitter is approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. This grant is valid only when the module is sold to OEM or OEM integrator. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. The integrator must be provided with specific information required to satisfy RF exposure compliance for final host devices and installations. Compliance of this device in all final host configurations is the responsibility of the Grantee. Installation of this device into portable RF Exposure category host devices requires the submission of a Class II permissive change or new application.



Mail To: