FCC ID 2ADNIZENITHS

Phone

by Worldlinks Communications, L.L.C.

Grantee Code: 2ADNI   Product Code: ZENITHS
Latest application date: 2015-02-16

FCC ID Device Details

FCC ID2ADNIZENITHS
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2ADNI
Product CodeZENITHS
Applicant BusinessWorldlinks Communications, L.L.C. 🇺🇸
Related Domains worldlinkscorp.net
Equipment ClassPhone
Test FirmNTEK Testing Technology Co., Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzChange in identification of presently authorized equipment. Original FCC ID: 2AAHVHO600 Grant Date: 01/29/20142015-02-16
2412-2462 MHzChange in identification of presently authorized equipment. Original FCC ID: 2AAHVHO600 Grant Date: 01/29/20142015-02-16
824.2-848.8 MHzChange in identification of presently authorized equipment. Original FCC ID: 2AAHVHO600 Grant Date: 01/29/20142015-02-16

Exhibits

DocumentTypeAvailableFile
External PhotosExternal Photos2015-02-16PDF 641.7 KB
Label & Location InfoID Label/Location Info2015-02-16PDF 210.5 KB
Label InfoID Label/Location Info2015-02-16PDF 92.4 KB
Authorization Letter from original applicantCover Letter(s)2015-02-16PDF 101.4 KB
Change of ID Request LetterCover Letter(s)2015-02-16PDF 35.2 KB
Family Models Declaration LetterCover Letter(s)2015-02-16PDF 62 KB
POACover Letter(s)2015-02-16PDF 36.3 KB

Application Information

Application IDwiwIvuJBDFe6vKfbZdgDKg==
Final Action Date2015-02-16
Application PurposeChange in identification of presently authorized equipment. Original FCC ID: 2AAHVHO600 Grant Date: 01/29/2014
Applicant FRN0024109555
ModelZENITHS
Frequency Range2402-2480 MHz
Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
Device DescriptionPhone
Responsible PartyElie Maloof, Jamal@worldlinkscorp.net , +1-847-281-9714
Test FirmBrown Lu, NTEK Testing Technology Co., Ltd., brown@ntek.org.cn , (86)-0755-61156588
TCB Emailtcb@siemic.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power listed is conducted. This device is approved for use in the handset described in this filing.

Applications

Application IDDatePurpose
wiwIvuJBDFe6vKfbZdgDKg==2015-02-16Change in identification of presently authorized equipment. Original FCC ID: 2AAHVHO600 Grant Date: 01/29/2014
pk5lobIRixZwl4OnB5iB+A==2015-02-16Change in identification of presently authorized equipment. Original FCC ID: 2AAHVHO600 Grant Date: 01/29/2014
BXf7JD0uraksjEw4NM/c8w==2015-02-16Change in identification of presently authorized equipment. Original FCC ID: 2AAHVHO600 Grant Date: 01/29/2014

Equipment Authorization

FrequencyOutputToleranceEmissionRulesGrant Notes
824.2-848.8 MHz1.10410.054ppm248KGXW22H
826.4-846.6 MHz0.15460.059ppm4M21F9W22H
1850.2-1909.8 MHz0.75510.033ppm249KGXW24E
1852.4-1907.6 MHz0.12280.032ppm4M19F9W24E
2402-2480 MHz0.002400015CCC
2412-2462 MHz0.100300015CCC

Grants

TCB Grant - Application wiwIvuJBDFe6vKfbZdgDKg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Siemic Inc.
775 Montague Expressway
Milpitas, CA 95035
Date of Grant: 02/16/2015

Application Dated: 02/16/2015
Worldlinks Communications, L.L.C.
270 Centre Drive, Suite 230,
Vernon Hills, IL 60061
 
Attention: Elie Maloof

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ADNIZENITHS
Name of Grantee:  Worldlinks Communications, L.L.C.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Phone
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0024  

Output power listed is conducted.

This device is approved for use in the handset described in this filing.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application wiwIvuJBDFe6vKfbZdgDKg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Worldlinks Communications, L.L.C.
270 Centre Drive, Suite 230,
Vernon Hills, IL 60061
United States
  Date of Grant: 02/16/2015

Application Dated: 02/16/2015
 
Attention: Elie Maloof

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ADNIZENITHS
Name of Grantee:  Worldlinks Communications, L.L.C.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Phone
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0024  

Output power listed is conducted.

This device is approved for use in the handset described in this filing.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To:


EA224950

TCB Grant - Application pk5lobIRixZwl4OnB5iB+A==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Siemic Inc.
775 Montague Expressway
Milpitas, CA 95035
Date of Grant: 02/16/2015

Application Dated: 02/16/2015
Worldlinks Communications, L.L.C.
270 Centre Drive, Suite 230,
Vernon Hills, IL 60061
 
Attention: Elie Maloof

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ADNIZENITHS
Name of Grantee:  Worldlinks Communications, L.L.C.
Equipment Class: Digital Transmission System
Notes: Phone
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.1003  

Output power listed is conducted.

This device is approved for use in the handset described in this filing.

The antenna(s) used for this transmitter must not be collocated with any other transmitters except in accordance with FCC multi-transmitter product procedures.

This device supports 802.11n 20MHz and 40 MHz.

SAR compliance for body-worn operating conditions is restricted to belt clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.0 cm separation distance between the device and the body. End users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, product specific (wireless router), and simultaneous transmission exposure conditions are 0.12 W/kg, 0.12 W/kg, 0.12 W/kg, and 0.88 W/kg, respectively.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application pk5lobIRixZwl4OnB5iB+A==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Worldlinks Communications, L.L.C.
270 Centre Drive, Suite 230,
Vernon Hills, IL 60061
United States
  Date of Grant: 02/16/2015

Application Dated: 02/16/2015
 
Attention: Elie Maloof

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ADNIZENITHS
Name of Grantee:  Worldlinks Communications, L.L.C.
Equipment Class: Digital Transmission System
Notes: Phone
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.1003  

Output power listed is conducted.

This device is approved for use in the handset described in this filing.

The antenna(s) used for this transmitter must not be collocated with any other transmitters except in accordance with FCC multi-transmitter product procedures.

This device supports 802.11n 20MHz and 40 MHz.

SAR compliance for body-worn operating conditions is restricted to belt clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.0 cm separation distance between the device and the body. End users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, product specific (wireless router), and simultaneous transmission exposure conditions are 0.12 W/kg, 0.12 W/kg, 0.12 W/kg, and 0.88 W/kg, respectively.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To:


EA252799

TCB Grant - Application BXf7JD0uraksjEw4NM/c8w==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Siemic Inc.
775 Montague Expressway
Milpitas, CA 95035
Date of Grant: 02/16/2015

Application Dated: 02/16/2015
Worldlinks Communications, L.L.C.
270 Centre Drive, Suite 230,
Vernon Hills, IL 60061
 
Attention: Elie Maloof

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ADNIZENITHS
Name of Grantee:  Worldlinks Communications, L.L.C.
Equipment Class: PCS Licensed Transmitter held to ear
Notes: Phone
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.2  -  848.8 1.1041 0.054  PM 248KGXW
24E 1850.2  -  1909.8 0.7551 0.033  PM 249KGXW
22H 826.4  -  846.6 0.1546 0.059  PM 4M21F9W
24E 1852.4  -  1907.6 0.1228 0.032  PM 4M19F9W

Power listed is ERP for part 22 and EIRP for part 24.

This device contains functions that are not operational in U.S Territories.

This filing is only applicable for US operations.

The antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures.

SAR compliance for body-worn operating conditions is restricted to belt clips, holsters or similar accessories that have no metallic component in the assembly and must provide a minimum separation distance of 1.0 cm between the device and the body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, product specific (wireless router), and simultaneous transmission exposure conditions are 0.22 W/kg, 0.76 W/kg, 0.77 W/kg, and 0.88 W/kg, respectively.

This device has integrated a DSS unlicensed transmitter and a DTS unlicensed transmitter certified under the same FCC ID.


EAS Grant - Application BXf7JD0uraksjEw4NM/c8w==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Worldlinks Communications, L.L.C.
270 Centre Drive, Suite 230,
Vernon Hills, IL 60061
United States
  Date of Grant: 02/16/2015

Application Dated: 02/16/2015
 
Attention: Elie Maloof

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ADNIZENITHS
Name of Grantee:  Worldlinks Communications, L.L.C.
Equipment Class: PCS Licensed Transmitter held to ear
Notes: Phone
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
22H 824.2  -  848.8 1.1041 0.054  PM 248KGXW
24E 1850.2  -  1909.8 0.7551 0.033  PM 249KGXW
22H 826.4  -  846.6 0.1546 0.059  PM 4M21F9W
24E 1852.4  -  1907.6 0.1228 0.032  PM 4M19F9W

Power listed is ERP for part 22 and EIRP for part 24.

This device contains functions that are not operational in U.S Territories.

This filing is only applicable for US operations.

The antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures.

SAR compliance for body-worn operating conditions is restricted to belt clips, holsters or similar accessories that have no metallic component in the assembly and must provide a minimum separation distance of 1.0 cm between the device and the body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, product specific (wireless router), and simultaneous transmission exposure conditions are 0.22 W/kg, 0.76 W/kg, 0.77 W/kg, and 0.88 W/kg, respectively.

This device has integrated a DSS unlicensed transmitter and a DTS unlicensed transmitter certified under the same FCC ID.



Mail To:


EA840694