FCC ID 2ADQO3SB1150Z
Camera System
by GD Midea Air-conditioning Equipment Co.,Ltd.
Grantee Code: 2ADQO Product Code: 3SB1150Z
Latest application date: 2019-04-14
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Original Equipment | 2019-04-14 |
| 5180-5240 MHz | Original Equipment | 2019-04-13 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2019-04-14 | PDF 763 KB |
| Internal Photos | Internal Photos | 2019-04-14 | PDF 136.6 KB |
| External Photos | External Photos | 2019-04-14 | PDF 223.7 KB |
| Label Location | ID Label/Location Info | 2019-04-14 | PDF 161 KB |
| Test Setup Photos | Test Setup Photos | 2019-04-14 | PDF 2 MB |
| Test Report BLE WIFI | Test Report | 2019-04-14 | PDF 3.7 MB |
| Test Report Part 15B | Test Report | 2019-04-14 | PDF 671.5 KB |
| Test Report DFS | Test Report | 2019-04-13 | PDF 998.5 KB |
| Test Report WIFI 5G | Test Report | 2019-04-13 | PDF 5.7 MB |
| Confidentiality Request Letter | Cover Letter(s) | 2019-04-14 | PDF 89.6 KB |
| Modular Approval Request Letter | Cover Letter(s) | 2019-04-14 | PDF 156.8 KB |
| Module Approval Request Letter | Cover Letter(s) | 2019-04-14 | PDF 156.8 KB |
| POA | Cover Letter(s) | 2019-04-14 | PDF 28.4 KB |
| Declaration Letter | Cover Letter(s) | 2019-04-13 | PDF 50.4 KB |
| Modular Approval Letter | Cover Letter(s) | 2019-04-13 | PDF 156.8 KB |
| MPE Report | RF Exposure Info | 2019-04-14 | PDF 337.3 KB |
| Block Diagram Metadata only | Block Diagram | PDF 44.8 KB | |
| Schematics Metadata only | Schematics | PDF 525 KB | |
| Operational Description Metadata only | Operational Description | PDF 266.1 KB | |
| Operational Description Software Security Metadata only | SDR Software/Security Inf | PDF 183.9 KB | |
| BOM Metadata only | Parts List/Tune Up Info | PDF 57.6 KB |
Application Information
| Application ID | ZsYsBjRoQCDF9Xkh5+JGZg== |
|---|---|
| Final Action Date | 2019-04-14 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0024126385 |
| Model | 3SB1150Z |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Camera System |
| Responsible Party | Xu Jim, jim_xu@midea.com  , +86-757-22367799 |
| Test Firm | Mr. Zhihui Liu, TA Technology (Shanghai) Co., Ltd., liuzhihui@ta-shanghai.com  , 86-21-50791141 |
| TCB Email | tei@timcoengr.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. This device is used only for mobile and fixed applications. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end-Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20, and 40 MHz bandwidth modes. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| ZsYsBjRoQCDF9Xkh5+JGZg== | 2019-04-14 | Original Equipment |
| Cpqwu/VSh4Iv7z+n3KrlVA== | 2019-04-14 | Original Equipment |
| yIibBpTa3LUNlNFx+nEvbg== | 2019-04-13 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application ZsYsBjRoQCDF9Xkh5+JGZg==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 04/14/2019 Application Dated: 04/13/2019 |
| GD Midea Air-conditioning Equipment Co.,Ltd. |
| Lingang Road, Beijiao, Shunde |
| FOSHAN, 528311 China |
| Attention: Xu Jim |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ADQO3SB1150Z |
| Name of Grantee: | GD Midea Air-conditioning Equipment Co.,Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | Camera System |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.061 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.005 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. This device is used only for mobile and fixed applications. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end-Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20, and 40 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application ZsYsBjRoQCDF9Xkh5+JGZg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
GD Midea Air-conditioning Equipment Co.,Ltd. Lingang Road, Beijiao, Shunde FOSHAN, 528311 China |
Date of Grant: 04/14/2019 Application Dated: 04/13/2019 |
| Attention: Xu Jim |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ADQO3SB1150Z |
| Name of Grantee: | GD Midea Air-conditioning Equipment Co.,Ltd. |
| Equipment Class: | Digital Transmission System |
| Notes: | Camera System |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.061 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.005 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. This device is used only for mobile and fixed applications. The module antenna(s) must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end-Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20, and 40 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 04/13/2019 Application Dated: 04/13/2019 |
| GD Midea Air-conditioning Equipment Co.,Ltd. |
| Lingang Road, Beijiao, Shunde |
| FOSHAN, 528311 China |
| Attention: Xu Jim |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ADQO3SB1150Z |
| Name of Grantee: | GD Midea Air-conditioning Equipment Co.,Ltd. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Camera System |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.068 | ||
| CC | 15E | 5260.0 - 5320.0 | 0.068 | ||
| CC | 15E | 5500.0 - 5700.0 | 0.074 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.075 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. This device is used only for mobile and fixed applications. The module antenna must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end-Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20, and 40 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application yIibBpTa3LUNlNFx+nEvbg==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
GD Midea Air-conditioning Equipment Co.,Ltd. Lingang Road, Beijiao, Shunde FOSHAN, 528311 China |
Date of Grant: 04/13/2019 Application Dated: 04/13/2019 |
| Attention: Xu Jim |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ADQO3SB1150Z |
| Name of Grantee: | GD Midea Air-conditioning Equipment Co.,Ltd. |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | Camera System |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.068 | ||
| CC | 15E | 5260.0 - 5320.0 | 0.068 | ||
| CC | 15E | 5500.0 - 5700.0 | 0.074 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.075 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. This device is used only for mobile and fixed applications. The module antenna must be installed to meet the RF exposure compliance separation distance of 20 cm and any additional testing and authorization process as required. Co-location of this module with other transmitters that operate simultaneously is required to be evaluated using the FCC multi-transmitter procedures. OEM integrators and end-Users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20, and 40 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 04/14/2019 Application Dated: 04/14/2019 |
| GD Midea Air-conditioning Equipment Co.,Ltd. |
| Lingang Road, Beijiao, Shunde |
| FOSHAN, 528311 China |
| Attention: Xu Jim |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ADQO3SB1150Z |
| Name of Grantee: | GD Midea Air-conditioning Equipment Co.,Ltd. |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | Camera System |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | - |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application Cpqwu/VSh4Iv7z+n3KrlVA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
GD Midea Air-conditioning Equipment Co.,Ltd. Lingang Road, Beijiao, Shunde FOSHAN, 528311 China |
Date of Grant: 04/14/2019 Application Dated: 04/14/2019 |
| Attention: Xu Jim |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ADQO3SB1150Z |
| Name of Grantee: | GD Midea Air-conditioning Equipment Co.,Ltd. |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | Camera System |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | - |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |