FCC ID 2ADUG-P48

Outdoor Access Point

by Shenzhen Yunlink Technology Co., Ltd

Grantee Code: 2ADUG   Product Code: P48
Latest application date: 2018-03-22

FCC ID Device Details

FCC ID2ADUG-P48
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2ADUG
Product CodeP48
Applicant BusinessShenzhen Yunlink Technology Co., Ltd 🇨🇳
Related Domains yuncore.com.cn
Equipment ClassOutdoor Access Point
Test FirmBSL Testing Co.,Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5745-5825 MHzOriginal Equipment2018-03-22
2412-2462 MHzOriginal Equipment2018-03-21

Exhibits

DocumentTypeAvailableFile
Users ManualUsers Manual2018-03-22PDF 2.8 MB
Internal photoInternal Photos2018-03-22PDF 410.4 KB
External photoExternal Photos2018-03-22PDF 574.5 KB
LabelID Label/Location Info2018-03-22PDF 92.7 KB
Test setup photoTest Setup Photos2018-03-22PDF 1.3 MB
Test reportTest Report2018-03-22PDF 1.2 MB
Test reportTest Report2018-03-21PDF 1.2 MB
Authorization LetterCover Letter(s)2018-03-22PDF 91.5 KB
Confidentiality request letterCover Letter(s)2018-03-22PDF 71.2 KB
Declaration of conformityCover Letter(s)2018-03-22PDF 80.1 KB
Family model declarationCover Letter(s)2018-03-22PDF 27.1 KB
RF ExposureRF Exposure Info2018-03-22PDF 74.7 KB
RF exposure Metadata onlyRF Exposure Info2018-03-22PDF 74.7 KB
RF Exposure revRF Exposure Info2018-03-21PDF 74.7 KB
Block Diagram Metadata onlyBlock DiagramPDF 249.6 KB
Schematic Metadata onlySchematicsPDF 669.9 KB
Operational Description Metadata onlyOperational DescriptionPDF 44.7 KB
Software configuration declaration Metadata onlySDR Software/Security InfPDF 62.2 KB
Software security Metadata onlySDR Software/Security InfPDF 90.2 KB
BOM Metadata onlyParts List/Tune Up InfoPDF 96.9 KB

Application Information

Application IDwOUxaSg8BVV1v2qhZb+cTA==
Final Action Date2018-03-22
Application PurposeOriginal Equipment
Applicant FRN0024120560
ModelP48
Frequency Range5745-5825 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionOutdoor Access Point
Responsible PartyJessy Wu, Manager, sales@yuncore.com.cn , 13760492976
Technical ContactBill Zhao, BSL Testing Co.,LTD, 16649703@qq.com , 86) 755-26649703
Test FirmBill ZHAO, BSL Testing Co.,Ltd., 16649703@qq.com , +86 755 26649703
TCB Emailcertification@micomlabs.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power listed is maximum combined conducted power. Device is a 2x2 MIMO as is described in the filing. This device contains 20, 40 and 80 MHz signal bandwidth. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
wOUxaSg8BVV1v2qhZb+cTA==2018-03-22Original Equipment
FPB5jxZa3bJ05E9oqKv5/g==2018-03-21Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.024000015CMO
5745-5825 MHz0.040400015EMO

Grants

TCB Grant - Application wOUxaSg8BVV1v2qhZb+cTA==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 03/22/2018

Application Dated: 03/21/2018
Shenzhen Yunlink Technology Co., Ltd
B3 Building, An'le Industrial Zone,
Hangcheng Road, gushu, xixiang town, Baoan,
Shenzhen Guangdong Province,
China
 
Attention: Jessy Wu , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ADUG-P48
Name of Grantee:  Shenzhen Yunlink Technology Co., Ltd
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Outdoor Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
MO 15E 5745.0  -  5825.0 0.0404  

Output power listed is maximum combined conducted power. Device is a 2x2 MIMO as is described in the filing. This device contains 20, 40 and 80 MHz signal bandwidth.

The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.


MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application wOUxaSg8BVV1v2qhZb+cTA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Shenzhen Yunlink Technology Co., Ltd
B3 Building, An'le Industrial Zone, Hangcheng Road, gushu, xixiang town, Baoan,
Shenzhen Guangdong Province,
China
  Date of Grant: 03/22/2018

Application Dated: 03/21/2018
 
Attention: Jessy Wu , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ADUG-P48
Name of Grantee:  Shenzhen Yunlink Technology Co., Ltd
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Outdoor Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
MO 15E 5745.0  -  5825.0 0.0404  

Output power listed is maximum combined conducted power. Device is a 2x2 MIMO as is described in the filing. This device contains 20, 40 and 80 MHz signal bandwidth.

The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.


MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application FPB5jxZa3bJ05E9oqKv5/g==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 03/21/2018

Application Dated: 03/21/2018
Shenzhen Yunlink Technology Co., Ltd
B3 Building, An'le Industrial Zone,
Hangcheng Road, gushu, xixiang town, Baoan,
Shenzhen Guangdong Province,
China
 
Attention: Jessy Wu , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ADUG-P48
Name of Grantee:  Shenzhen Yunlink Technology Co., Ltd
Equipment Class: Digital Transmission System
Notes: Outdoor Access Point
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
MO 15C 2412.0  -  2462.0 0.024  

Output power listed is maximum combined conducted power. This device contains 20 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing.

The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.


MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application FPB5jxZa3bJ05E9oqKv5/g==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Shenzhen Yunlink Technology Co., Ltd
B3 Building, An'le Industrial Zone, Hangcheng Road, gushu, xixiang town, Baoan,
Shenzhen Guangdong Province,
China
  Date of Grant: 03/21/2018

Application Dated: 03/21/2018
 
Attention: Jessy Wu , Manager

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ADUG-P48
Name of Grantee:  Shenzhen Yunlink Technology Co., Ltd
Equipment Class: Digital Transmission System
Notes: Outdoor Access Point
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
MO 15C 2412.0  -  2462.0 0.024  

Output power listed is maximum combined conducted power. This device contains 20 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing.

The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.


MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: