FCC ID 2ADWC-A16060H
802.11b/g/n IoT Module
by AcSiP Technology Corporation
Grantee Code: 2ADWC Product Code: A16060H
FCC ID Device Details
| FCC ID | 2ADWC-A16060H |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2ADWC |
| Product Code | A16060H |
| Applicant Business | AcSiP Technology Corporation 🇹🇼 |
| Related Domains |  acsip.com.tw |
| Equipment Class | 802.11b/g/n IoT Module |
| Test Firm | Bureau Veritas CPS (H.K.) Ltd., Taoyuan Branch |
Application Information
| Application ID | 9XLYgcKMlU0hLWrhCiuWQQ== |
|---|---|
| Application Purpose | Original Equipment |
| Applicant FRN | 0024179541 |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | 802.11b/g/n IoT Module |
| Responsible Party | Sam Hus, Director, DCC@acsip.com.tw , +886 3 286 8388 |
| Test Firm | Richard Chen, Bureau Veritas CPS (H.K.) Ltd., Taoyuan Branch, richard.chen@tw.bureauveritas.com  , 886-3-3183232 |
| TCB Email | certification@curtis-straus.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 03/13/2017 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Output power listed is conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). |
Applications
| Application ID | Purpose |
|---|---|
| 9XLYgcKMlU0hLWrhCiuWQQ== | Original Equipment |
Equipment Authorization
| Frequency | Output | Rules |
|---|---|---|
| 2412-2462 MHz | 0.1630000 | 15C |
Grants
TCB Grant - Application 9XLYgcKMlU0hLWrhCiuWQQ==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Curtis-Straus LLC One Distribution Center Circle Suite #1 Littleton, MA 01460 |
Date of Grant: 09/16/2016 Application Dated: 09/14/2016 |
| AcSiP Technology Corporation |
| 3F,-1 No.207, Fusing Rd., |
| Taoyuan City, Taoyuan County, 33066 Taiwan |
| Attention: Sam Hus , Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ADWC-A16060H |
| Name of Grantee: | AcSiP Technology Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11b/g/n IoT Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.163 |
| Output power listed is conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). |
EAS Grant - Application 9XLYgcKMlU0hLWrhCiuWQQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
AcSiP Technology Corporation 3F,-1 No.207, Fusing Rd., Taoyuan City, Taoyuan County, 33066 Taiwan |
Date of Grant: 09/16/2016 Application Dated: 09/14/2016 |
| Attention: Sam Hus , Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ADWC-A16060H |
| Name of Grantee: | AcSiP Technology Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11b/g/n IoT Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.163 |
| Output power listed is conducted. Modular Approval for mobile RF Exposure conditions, the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Approval is limited to OEM installation only. OEM integrators must be provided with antenna installation instructions. OEM integrators and end-users must be provided with transmitter operating conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Only the antenna(s) listed in this filing can be used with this device. Use of additional antenna(s) are subject to the requirements of 15.204(c)(4). |
| Mail To: |