FCC ID 2ADWC-AI7697HD
2ADWCAI7697HD, 2ADWC AI7697HD, 2ADWC-AI7697HD, 2ADWC-A17697HD
AcSiP Technology Corporation 802.11 IoT Module AI7697HD
An FCC ID is the product ID assigned by the FCC to identify wireless products in the market. The FCC chooses 3 or 5 character "Grantee" codes to identify the business that created the product.
For example, the grantee code for FCC ID: 2ADWC-AI7697HD is 2ADWC. The remaining characters of the FCC ID, -AI7697HD, are often associated with the product model, but they can be random. These letters are chosen by the applicant.
In addition to the application, the FCC also publishes internal images, external images, user manuals, and test results for wireless devices. They can be under the "exhibits" tab below.
Purchase on Amazon:
802.11 IoT Module
- Application: 802.11 IoT Module
- Equipment Class: NII - Unlicensed National Information Infrastructure TX
- Short Link: fcc.id/2ADWC-AI7697HD
- Sources: FCC.gov | FCC.report
- Registered By: AcSiP Technology Corporation - 2ADWC (Taiwan)
| App # | Purpose | Date | Unique ID |
|---|---|---|---|
| 1 | Original Equipment | 2017-10-25 | HjEFGGcD5AwRAPA/XH8rbw== |
| 2 | Original Equipment | 2017-10-25 | Fs/lHLISRqNHbmgJhMsuPA== |
| 3 | Class II Permissive Change | 2018-10-01 | +BT1qoT6krJWuTlBNxYnNg== |
| 4 | Class II Permissive Change | 2018-10-01 | g2NZQ9ELqFvyIa+oWuXIsQ== |
Operating Frequencies
Device operates within approved frequencies overlapping with the following cellular bands: LTE 255,Unlicensed NII-3 DOWN | LTE 46,TD Unlicensed DOWN |
| Frequency Range | Power Output | Rule Parts | Grant Notes | App # |
|---|---|---|---|---|
2.402-2.48 GHz  | 4 mW | 15C | CC | 1.1 |
| 2.402-2.48 GHz | 4 mW | 15C | CC | 4.1 |
2.412-2.462 GHz  | 281 mW | 15C | CC | 1.2 |
| 2.412-2.462 GHz | 281 mW | 15C | CC | 4.2 |
5.18-5.24 GHz  | 26 mW | 15E | 38, CC | 2.1 |
| 5.18-5.24 GHz | 26 mW | 15E | 38, CC | 3.1 |
| 5.745-5.825 GHz | 27 mW | 15E | 38, CC | 2.2 |
| 5.745-5.825 GHz | 27 mW | 15E | 38, CC | 3.2 |
Exhibits
Available Exhibits
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 4 | MPE Report | RF Exposure Info Adobe Acrobat PDF (198 kB) |
2018-09-28 2018-10-01 |
| 4 | Test Report DTS BT LE | Test Report Adobe Acrobat PDF (526 kB) |
2018-09-28 2018-10-01 |
| 4 | Test Report DTS | Test Report Adobe Acrobat PDF (764 kB) |
2018-09-28 2018-10-01 |
| 4 | Power of Attorney | Cover Letter(s) Adobe Acrobat PDF (226 kB) |
2018-09-28 2018-10-01 |
| 4 | Confidentiality Request Letter | Cover Letter(s) Adobe Acrobat PDF (205 kB) |
2018-09-28 2018-10-01 |
| 4 | Class II Permissive Change Letter | Cover Letter(s) Adobe Acrobat PDF (369 kB) |
2018-09-28 2018-10-01 |
| 4 | Test Setup Photos | Test Setup Photos Adobe Acrobat PDF (2131 kB) |
2018-09-28 2019-03-30 |
| 3 | Test Report NII | Test Report Adobe Acrobat PDF (2297 kB) |
2018-09-28 2018-10-01 |
| 3 | MPE Report | RF Exposure Info Adobe Acrobat PDF (198 kB) |
2018-09-28 2018-10-01 |
| 3 | Power of Attorney | Cover Letter(s) Adobe Acrobat PDF (226 kB) |
2018-09-28 2018-10-01 |
| 3 | Confidentiality Request Letter | Cover Letter(s) Adobe Acrobat PDF (205 kB) |
2018-09-28 2018-10-01 |
| 3 | Class II Permissive Change Letter | Cover Letter(s) Adobe Acrobat PDF (369 kB) |
2018-09-28 2018-10-01 |
| 3 | Test Setup Photos | Test Setup Photos Adobe Acrobat PDF (2131 kB) |
2018-09-28 2019-03-30 |
| 1 | MPE Report | RF Exposure Info Adobe Acrobat PDF (448 kB) |
2017-10-24 2017-10-25 |
| 1 | Test Report DTS WLAN | Test Report Adobe Acrobat PDF (1101 kB) |
2017-10-24 2017-10-25 |
| 1 | Test Report DTS BLE | Test Report Adobe Acrobat PDF (537 kB) |
2017-10-24 2017-10-25 |
| 1 | Label Sample & Location | ID Label/Location Info Adobe Acrobat PDF (92 kB) |
2017-10-24 2017-10-25 |
| 1 | Declaration for BT WLAN | Cover Letter(s) Adobe Acrobat PDF (194 kB) |
2017-10-24 2017-10-25 |
| 1 | Letter POA | Cover Letter(s) Adobe Acrobat PDF (294 kB) |
2017-10-24 2017-10-25 |
| 1 | Modular Approval Request Letter | Cover Letter(s) Adobe Acrobat PDF (516 kB) |
2017-10-24 2017-10-25 |
| 1 | Letter DoC | Cover Letter(s) Adobe Acrobat PDF (187 kB) |
2017-10-24 2017-10-25 |
| 1 | Declaration for WLAN Channel and Country Code | Cover Letter(s) Adobe Acrobat PDF (168 kB) |
2017-10-24 2017-10-25 |
| 1 | Confidentiality Request Letter | Cover Letter(s) Adobe Acrobat PDF (356 kB) |
2017-10-24 2017-10-25 |
| 1 | Test Setup Photos | Test Setup Photos Adobe Acrobat PDF (1093 kB) |
2017-10-24 2018-04-23 |
| 1 | Internal Photo | Internal Photos Adobe Acrobat PDF (165 kB) |
2017-10-24 2018-04-23 |
| 1 | External Photo | External Photos Adobe Acrobat PDF (72 kB) |
2017-10-24 2018-04-23 |
| 1 | User Manual Safety Statement | Users Manual Adobe Acrobat PDF (76 kB) |
2017-10-24 2018-04-23 |
| 1 | User Manual | Users Manual Adobe Acrobat PDF (808 kB) |
2017-10-24 2018-04-23 |
| 2 | Test Report NII | Test Report Adobe Acrobat PDF (1521 kB) |
2017-10-24 2017-10-25 |
| 2 | MPE Report | RF Exposure Info Adobe Acrobat PDF (448 kB) |
2017-10-24 2017-10-25 |
| 2 | Label Sample & Location | ID Label/Location Info Adobe Acrobat PDF (92 kB) |
2017-10-24 2017-10-25 |
| 2 | Declaration for BT WLAN | Cover Letter(s) Adobe Acrobat PDF (194 kB) |
2017-10-24 2017-10-25 |
| 2 | Letter POA | Cover Letter(s) Adobe Acrobat PDF (294 kB) |
2017-10-24 2017-10-25 |
| 2 | Modular Approval Request Letter | Cover Letter(s) Adobe Acrobat PDF (516 kB) |
2017-10-24 2017-10-25 |
| 2 | Letter DoC | Cover Letter(s) Adobe Acrobat PDF (187 kB) |
2017-10-24 2017-10-25 |
| 2 | Declaration for WLAN Channel and Country Code | Cover Letter(s) Adobe Acrobat PDF (168 kB) |
2017-10-24 2017-10-25 |
| 2 | Confidentiality Request Letter | Cover Letter(s) Adobe Acrobat PDF (356 kB) |
2017-10-24 2017-10-25 |
| 2 | Test Setup Photos | Test Setup Photos Adobe Acrobat PDF (1093 kB) |
2017-10-24 2018-04-23 |
| 2 | Internal Photos | Internal Photos Adobe Acrobat PDF (165 kB) |
2017-10-24 2018-04-23 |
| 2 | External Photos | External Photos Adobe Acrobat PDF (72 kB) |
2017-10-24 2018-04-23 |
| 2 | User Manual Safety Statement | Users Manual Adobe Acrobat PDF (76 kB) |
2017-10-24 2018-04-23 |
| 2 | User Manual | Users Manual Adobe Acrobat PDF (808 kB) |
2017-10-24 2018-04-23 |
APP # 4 (2018-10-01)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 4 | MPE Report | RF Exposure Info Adobe Acrobat PDF (198 kB) |
2018-09-28 00:00:00 2018-10-01 00:00:00 |
| 4 | Test Report DTS BT LE | Test Report Adobe Acrobat PDF (526 kB) |
2018-09-28 00:00:00 2018-10-01 00:00:00 |
| 4 | Test Report DTS | Test Report Adobe Acrobat PDF (764 kB) |
2018-09-28 00:00:00 2018-10-01 00:00:00 |
| 4 | Power of Attorney | Cover Letter(s) Adobe Acrobat PDF (226 kB) |
2018-09-28 00:00:00 2018-10-01 00:00:00 |
| 4 | Confidentiality Request Letter | Cover Letter(s) Adobe Acrobat PDF (205 kB) |
2018-09-28 00:00:00 2018-10-01 00:00:00 |
| 4 | Class II Permissive Change Letter | Cover Letter(s) Adobe Acrobat PDF (369 kB) |
2018-09-28 00:00:00 2018-10-01 00:00:00 |
| 4 | Test Setup Photos | Test Setup Photos Adobe Acrobat PDF (2131 kB) |
2018-09-28 00:00:00 2019-03-30 00:00:00 |
APP # 3 (2018-10-01)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 3 | Test Report NII | Test Report Adobe Acrobat PDF (2297 kB) |
2018-09-28 00:00:00 2018-10-01 00:00:00 |
| 3 | MPE Report | RF Exposure Info Adobe Acrobat PDF (198 kB) |
2018-09-28 00:00:00 2018-10-01 00:00:00 |
| 3 | Power of Attorney | Cover Letter(s) Adobe Acrobat PDF (226 kB) |
2018-09-28 00:00:00 2018-10-01 00:00:00 |
| 3 | Confidentiality Request Letter | Cover Letter(s) Adobe Acrobat PDF (205 kB) |
2018-09-28 00:00:00 2018-10-01 00:00:00 |
| 3 | Class II Permissive Change Letter | Cover Letter(s) Adobe Acrobat PDF (369 kB) |
2018-09-28 00:00:00 2018-10-01 00:00:00 |
| 3 | Test Setup Photos | Test Setup Photos Adobe Acrobat PDF (2131 kB) |
2018-09-28 00:00:00 2019-03-30 00:00:00 |
APP # 1 (2017-10-25)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 1 | MPE Report | RF Exposure Info Adobe Acrobat PDF (448 kB) |
2017-10-24 00:00:00 2017-10-25 00:00:00 |
| 1 | Test Report DTS WLAN | Test Report Adobe Acrobat PDF (1101 kB) |
2017-10-24 00:00:00 2017-10-25 00:00:00 |
| 1 | Test Report DTS BLE | Test Report Adobe Acrobat PDF (537 kB) |
2017-10-24 00:00:00 2017-10-25 00:00:00 |
| 1 | Label Sample & Location | ID Label/Location Info Adobe Acrobat PDF (92 kB) |
2017-10-24 00:00:00 2017-10-25 00:00:00 |
| 1 | Declaration for BT WLAN | Cover Letter(s) Adobe Acrobat PDF (194 kB) |
2017-10-24 00:00:00 2017-10-25 00:00:00 |
| 1 | Letter POA | Cover Letter(s) Adobe Acrobat PDF (294 kB) |
2017-10-24 00:00:00 2017-10-25 00:00:00 |
| 1 | Modular Approval Request Letter | Cover Letter(s) Adobe Acrobat PDF (516 kB) |
2017-10-24 00:00:00 2017-10-25 00:00:00 |
| 1 | Letter DoC | Cover Letter(s) Adobe Acrobat PDF (187 kB) |
2017-10-24 00:00:00 2017-10-25 00:00:00 |
| 1 | Declaration for WLAN Channel and Country Code | Cover Letter(s) Adobe Acrobat PDF (168 kB) |
2017-10-24 00:00:00 2017-10-25 00:00:00 |
| 1 | Confidentiality Request Letter | Cover Letter(s) Adobe Acrobat PDF (356 kB) |
2017-10-24 00:00:00 2017-10-25 00:00:00 |
| 1 | Test Setup Photos | Test Setup Photos Adobe Acrobat PDF (1093 kB) |
2017-10-24 00:00:00 2018-04-23 00:00:00 |
| 1 | Internal Photo | Internal Photos Adobe Acrobat PDF (165 kB) |
2017-10-24 00:00:00 2018-04-23 00:00:00 |
| 1 | External Photo | External Photos Adobe Acrobat PDF (72 kB) |
2017-10-24 00:00:00 2018-04-23 00:00:00 |
| 1 | User Manual Safety Statement | Users Manual Adobe Acrobat PDF (76 kB) |
2017-10-24 00:00:00 2018-04-23 00:00:00 |
| 1 | User Manual | Users Manual Adobe Acrobat PDF (808 kB) |
2017-10-24 00:00:00 2018-04-23 00:00:00 |
APP # 2 (2017-10-25)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 2 | Test Report NII | Test Report Adobe Acrobat PDF (1521 kB) |
2017-10-24 00:00:00 2017-10-25 00:00:00 |
| 2 | MPE Report | RF Exposure Info Adobe Acrobat PDF (448 kB) |
2017-10-24 00:00:00 2017-10-25 00:00:00 |
| 2 | Label Sample & Location | ID Label/Location Info Adobe Acrobat PDF (92 kB) |
2017-10-24 00:00:00 2017-10-25 00:00:00 |
| 2 | Declaration for BT WLAN | Cover Letter(s) Adobe Acrobat PDF (194 kB) |
2017-10-24 00:00:00 2017-10-25 00:00:00 |
| 2 | Letter POA | Cover Letter(s) Adobe Acrobat PDF (294 kB) |
2017-10-24 00:00:00 2017-10-25 00:00:00 |
| 2 | Modular Approval Request Letter | Cover Letter(s) Adobe Acrobat PDF (516 kB) |
2017-10-24 00:00:00 2017-10-25 00:00:00 |
| 2 | Letter DoC | Cover Letter(s) Adobe Acrobat PDF (187 kB) |
2017-10-24 00:00:00 2017-10-25 00:00:00 |
| 2 | Declaration for WLAN Channel and Country Code | Cover Letter(s) Adobe Acrobat PDF (168 kB) |
2017-10-24 00:00:00 2017-10-25 00:00:00 |
| 2 | Confidentiality Request Letter | Cover Letter(s) Adobe Acrobat PDF (356 kB) |
2017-10-24 00:00:00 2017-10-25 00:00:00 |
| 2 | Test Setup Photos | Test Setup Photos Adobe Acrobat PDF (1093 kB) |
2017-10-24 00:00:00 2018-04-23 00:00:00 |
| 2 | Internal Photos | Internal Photos Adobe Acrobat PDF (165 kB) |
2017-10-24 00:00:00 2018-04-23 00:00:00 |
| 2 | External Photos | External Photos Adobe Acrobat PDF (72 kB) |
2017-10-24 00:00:00 2018-04-23 00:00:00 |
| 2 | User Manual Safety Statement | Users Manual Adobe Acrobat PDF (76 kB) |
2017-10-24 00:00:00 2018-04-23 00:00:00 |
| 2 | User Manual | Users Manual Adobe Acrobat PDF (808 kB) |
2017-10-24 00:00:00 2018-04-23 00:00:00 |
| 2 | Operational Description Software Security | SDR Software/Security Inf Adobe Acrobat PDF (1536 kB) |
2017-10-24 00:00:00 N/A |
APP # 1 (2017-10-25)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 1 | Schematics | Schematics Adobe Acrobat PDF (98 kB) |
2017-10-24 00:00:00 N/A |
| 1 | Operational Description | Operational Description Adobe Acrobat PDF (413 kB) |
2017-10-24 00:00:00 N/A |
APP # 2 (2017-10-25)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 2 | Operational Description | Operational Description Adobe Acrobat PDF (413 kB) |
2017-10-24 00:00:00 N/A |
| 2 | Parts List | Parts List/Tune Up Info Adobe Acrobat PDF (115 kB) |
2017-10-24 00:00:00 N/A |
| 2 | Schematics | Schematics Adobe Acrobat PDF (98 kB) |
2017-10-24 00:00:00 N/A |
APP # 1 (2017-10-25)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 1 | Block Diagram | Block Diagram Adobe Acrobat PDF (57 kB) |
2017-10-24 00:00:00 N/A |
APP # 2 (2017-10-25)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 2 | Block Diagram | Block Diagram Adobe Acrobat PDF (57 kB) |
2017-10-24 00:00:00 N/A |
APP # 1 (2017-10-25)
| App # | Document | Type | Submitted Available |
|---|---|---|---|
| 1 | Parts List | Parts List/Tune Up Info Adobe Acrobat PDF (115 kB) |
2017-10-24 00:00:00 N/A |
Application Forms
| Application for Equipment Authorization FCC Form 731 TCB Version |
WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT
(U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR
CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE
(U.S. CODE, TITLE 47, SECTION 503).
| Application for Equipment Authorization FCC Form 731 TCB Version |
WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT
(U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR
CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE
(U.S. CODE, TITLE 47, SECTION 503).
| Application for Equipment Authorization FCC Form 731 TCB Version |
WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT
(U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR
CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE
(U.S. CODE, TITLE 47, SECTION 503).
| Application for Equipment Authorization FCC Form 731 TCB Version |
WILLFUL FALSE STATEMENTS MADE ON THIS FORM ARE PUNISHABLE BY FINE AND IMPRISONMENT
(U.S. CODE, TITLE 18, SECTION 1001), AND/OR REVOCATION OF ANY STATION LICENSE OR
CONSTRUCTION PERMIT (U.S. CODE, TITLE 47, SECTION 312(a)(1)), AND/OR FORFEITURE
(U.S. CODE, TITLE 47, SECTION 503).
Applications are submitted for FCC ID and Grant requests. Click an above application to view details
Grants
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: | ||
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 10/01/2018 |
| AcSiP Technology Corporation |
| 3F,-1 No.207, Fusing Rd., |
| Taoyuan City, Taoyuan County, 33066 Taiwan |
| Attention: Sam Hus , Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ADWC-AI7697HD |
| Name of Grantee: | AcSiP Technology Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11 IoT Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC | 15E | 5180.0 - 5240.0 | 0.026 | ||
| 38 CC | 15E | 5745.0 - 5825.0 | 0.027 |
| Single Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Grantee is responsible for providing specific testing instructions to host manufacturers for additional testing to verify compliance as a composite system. This includes retesting of transmitter module per part 15.31(h) and (k).This device has 20, 40 MHz bandwidth modes. C2PC: This Class II Permissive change is to add the following antennas. Brand: Compal, Model: 81.EKB15.G14, Antenna Type: Coupled, Antenna Gain: 2.4 GHz 3.34 dBi, 5 GHz 1.44 dBi, Antenna Connector: IPEX-MHF-4 Brand: Compal, Model: DC33002520U, Antenna Type: PIFA, Antenna Gain: 2.4 GHz 3.46 dBi, 5 GHz 5.37 dBi, Antenna Connector: IPEX-MHF-4 |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification | ||
|
AcSiP Technology Corporation 3F,-1 No.207, Fusing Rd., Taoyuan City, Taoyuan County, 33066 Taiwan |
Date of Grant: 10/01/2018 |
| Attention: Sam Hus , Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ADWC-AI7697HD |
| Name of Grantee: | AcSiP Technology Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11 IoT Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC | 15E | 5180.0 - 5240.0 | 0.026 | ||
| 38 CC | 15E | 5745.0 - 5825.0 | 0.027 |
| Single Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Grantee is responsible for providing specific testing instructions to host manufacturers for additional testing to verify compliance as a composite system. This includes retesting of transmitter module per part 15.31(h) and (k).This device has 20, 40 MHz bandwidth modes. C2PC: This Class II Permissive change is to add the following antennas. Brand: Compal, Model: 81.EKB15.G14, Antenna Type: Coupled, Antenna Gain: 2.4 GHz 3.34 dBi, 5 GHz 1.44 dBi, Antenna Connector: IPEX-MHF-4 Brand: Compal, Model: DC33002520U, Antenna Type: PIFA, Antenna Gain: 2.4 GHz 3.46 dBi, 5 GHz 5.37 dBi, Antenna Connector: IPEX-MHF-4 |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |
EA132219 |
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: | ||
|
Timco Engineering, Inc. 849 NW State Road 45 <BR>P.O. Box 370, Newberry, FL 32669 |
Date of Grant: 10/25/2017 |
| AcSiP Technology Corporation |
| 3F,-1 No.207, Fusing Rd., |
| Taoyuan City, Taoyuan County, 33066 Taiwan |
| Attention: Sam Hus , Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ADWC-AI7697HD |
| Name of Grantee: | AcSiP Technology Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11 IoT Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC | 15E | 5180.0 - 5240.0 | 0.026 | ||
| 38 CC | 15E | 5745.0 - 5825.0 | 0.027 |
| Single Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Grantee is responsible for providing specific testing instructions to host manufacturers for additional testing to verify compliance as a composite system. This includes retesting of transmitter module per part 15.31(h) and (k).This device has 20, 40 MHz bandwidth modes. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification | ||
|
AcSiP Technology Corporation 3F,-1 No.207, Fusing Rd., Taoyuan City, Taoyuan County, 33066 Taiwan |
Date of Grant: 10/25/2017 |
| Attention: Sam Hus , Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ADWC-AI7697HD |
| Name of Grantee: | AcSiP Technology Corporation |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | 802.11 IoT Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 38 CC | 15E | 5180.0 - 5240.0 | 0.026 | ||
| 38 CC | 15E | 5745.0 - 5825.0 | 0.027 |
| Single Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Grantee is responsible for providing specific testing instructions to host manufacturers for additional testing to verify compliance as a composite system. This includes retesting of transmitter module per part 15.31(h) and (k).This device has 20, 40 MHz bandwidth modes. |
| 38: | This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |
EA804914 |
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: | ||
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 10/01/2018 |
| AcSiP Technology Corporation |
| 3F,-1 No.207, Fusing Rd., |
| Taoyuan City, Taoyuan County, 33066 Taiwan |
| Attention: Sam Hus , Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ADWC-AI7697HD |
| Name of Grantee: | AcSiP Technology Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11 IoT Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.004 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.281 |
| Single Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Grantee is responsible for providing specific testing instructions to host manufacturers for additional testing to verify compliance as a composite system. This includes retesting of transmitter module per part 15.31(h) and (k).This device has 20, 40 MHz bandwidth modes. C2PC: This Class II Permissive change is to add the following antennas. Brand: Compal, Model: 81.EKB15.G14, Antenna Type: Coupled, Antenna Gain: 2.4 GHz 3.34 dBi, 5 GHz 1.44 dBi, Antenna Connector: IPEX-MHF-4 Brand: Compal, Model: DC33002520U, Antenna Type: PIFA, Antenna Gain: 2.4 GHz 3.46 dBi, 5 GHz 5.37 dBi, Antenna Connector: IPEX-MHF-4 |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification | ||
|
AcSiP Technology Corporation 3F,-1 No.207, Fusing Rd., Taoyuan City, Taoyuan County, 33066 Taiwan |
Date of Grant: 10/01/2018 |
| Attention: Sam Hus , Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ADWC-AI7697HD |
| Name of Grantee: | AcSiP Technology Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11 IoT Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.004 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.281 |
| Single Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Grantee is responsible for providing specific testing instructions to host manufacturers for additional testing to verify compliance as a composite system. This includes retesting of transmitter module per part 15.31(h) and (k).This device has 20, 40 MHz bandwidth modes. C2PC: This Class II Permissive change is to add the following antennas. Brand: Compal, Model: 81.EKB15.G14, Antenna Type: Coupled, Antenna Gain: 2.4 GHz 3.34 dBi, 5 GHz 1.44 dBi, Antenna Connector: IPEX-MHF-4 Brand: Compal, Model: DC33002520U, Antenna Type: PIFA, Antenna Gain: 2.4 GHz 3.46 dBi, 5 GHz 5.37 dBi, Antenna Connector: IPEX-MHF-4 |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |
EA347382 |
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: | ||
|
Timco Engineering, Inc. 849 NW State Road 45 <BR>P.O. Box 370, Newberry, FL 32669 |
Date of Grant: 10/25/2017 |
| AcSiP Technology Corporation |
| 3F,-1 No.207, Fusing Rd., |
| Taoyuan City, Taoyuan County, 33066 Taiwan |
| Attention: Sam Hus , Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ADWC-AI7697HD |
| Name of Grantee: | AcSiP Technology Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11 IoT Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.004 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.281 |
| Single Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Grantee is responsible for providing specific testing instructions to host manufacturers for additional testing to verify compliance as a composite system. This includes retesting of transmitter module per part 15.31(h) and (k).This device has 20, 40 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification | ||
|
AcSiP Technology Corporation 3F,-1 No.207, Fusing Rd., Taoyuan City, Taoyuan County, 33066 Taiwan |
Date of Grant: 10/25/2017 |
| Attention: Sam Hus , Director |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ADWC-AI7697HD |
| Name of Grantee: | AcSiP Technology Corporation |
| Equipment Class: | Digital Transmission System |
| Notes: | 802.11 IoT Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.004 | ||
| CC | 15C | 2412.0 - 2462.0 | 0.281 |
| Single Modular Approval. Power listed is maximum power conducted. This module is restricted to installation in products for use only in mobile and fixed applications. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not transmit simultaneously with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Grantee is responsible for providing specific testing instructions to host manufacturers for additional testing to verify compliance as a composite system. This includes retesting of transmitter module per part 15.31(h) and (k).This device has 20, 40 MHz bandwidth modes. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |
EA337052 |