FCC ID 2ADYQ-VCG001
Gateway
by Vensi,Inc.
Grantee Code: 2ADYQ Product Code: VCG001
Latest application date: 2015-03-23
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 2402-2480 MHz | Original Equipment | 2015-03-23 |
| 2402-2480 MHz | Original Equipment | 2015-03-23 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User manual | Users Manual | 2015-03-23 | PDF 1.5 MB |
| Internal Photos | Internal Photos | 2015-03-23 | PDF 508.5 KB |
| External Photos | External Photos | 2015-03-23 | PDF 327 KB |
| label&label location | ID Label/Location Info | 2015-03-23 | PDF 106 KB |
| Test Setup Photos | Test Setup Photos | 2015-03-23 | PDF 325.9 KB |
| Test Setup Photos | Test Setup Photos | 2015-03-23 | PDF 212.2 KB |
| Test Setup Photos | Test Setup Photos | 2015-03-23 | PDF 324.7 KB |
| Revised Test Report | Test Report | 2015-03-23 | PDF 1.7 MB |
| Test Report | Test Report | 2015-03-23 | PDF 1.6 MB |
| Test Report | Test Report | 2015-03-23 | PDF 1.7 MB |
| Test Report BT4.0 | Test Report | 2015-03-23 | PDF 1.1 MB |
| Test Report WiFi Metadata only | Test Report | 2015-03-23 | PDF 1.7 MB |
| Ad-HocCountry Code Cover Letter | Cover Letter(s) | 2015-03-23 | PDF 60.9 KB |
| Authorization Letter | Cover Letter(s) | 2015-03-23 | PDF 35.3 KB |
| Confidentiality Request Letter | Cover Letter(s) | 2015-03-23 | PDF 36.5 KB |
| Block Diagram Metadata only | Block Diagram | PDF 273.5 KB | |
| schematic Metadata only | Schematics | PDF 209.8 KB | |
| operational description Metadata only | Operational Description | PDF 497.1 KB | |
| BOM Metadata only | Parts List/Tune Up Info | PDF 65.5 KB |
Application Information
| Application ID | iN7a4+5RJfU5AVLxg7oMTw== |
|---|---|
| Final Action Date | 2015-03-23 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0024206013 |
| Model | VCG001 |
| Frequency Range | 2402-2480 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | Gateway |
| Responsible Party | Kranti Kambhampati, Manager, kranti@vensi.com  , +1(847) 603 4675 |
| Agent | Ivy Ivy Ivy, Shenzhen Morlab Communications Technology Co.,Ltd, Ivy.zhu@morlab.cn  , 86-755-36698618 |
| Technical Contact | Ivy Zhu, Shenzhen Morlab Communications Technology Co.,Ltd, Ivy.zhu@morlab.cn , 86-755-36698618 |
| Test Firm | Ivy zhu, Shenzhen Morlab Communications Technology Co., Ltd, ivy.zhu@morlab.cn , 8675536698555 |
| TCB Email | tcbinfo@metlabs.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Output Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| iN7a4+5RJfU5AVLxg7oMTw== | 2015-03-23 | Original Equipment |
| GAfU+zxD//vqnbm5Fcmlng== | 2015-03-23 | Original Equipment |
| 8Rf2+4o0EbLRCnFbnQS55g== | 2015-03-23 | Original Equipment |
Equipment Authorization
Grants
TCB Grant - Application iN7a4+5RJfU5AVLxg7oMTw==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Eurofins Electrical and Electronic Testing NA, Inc 914 W. Patapsco Avenue Baltimore, MD 21230-3432 |
Date of Grant: 03/23/2015 Application Dated: 03/23/2015 |
| Vensi,Inc. |
| 750 W Lake Cook Rd, Suite 490, |
| Buffalo Grove, IL, USA, 60089 |
| Buffalo Grove, IL 60089 |
| Attention: Kranti Kambhampati , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ADYQ-VCG001 |
| Name of Grantee: | Vensi,Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Gateway |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.01 |
| Output Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application iN7a4+5RJfU5AVLxg7oMTw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Vensi,Inc. 750 W Lake Cook Rd, Suite 490, Buffalo Grove, IL, USA, 60089 Buffalo Grove, IL 60089 United States |
Date of Grant: 03/23/2015 Application Dated: 03/23/2015 |
| Attention: Kranti Kambhampati , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ADYQ-VCG001 |
| Name of Grantee: | Vensi,Inc. |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Gateway |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.01 |
| Output Power listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Eurofins Electrical and Electronic Testing NA, Inc 914 W. Patapsco Avenue Baltimore, MD 21230-3432 |
Date of Grant: 03/23/2015 Application Dated: 03/23/2015 |
| Vensi,Inc. |
| 750 W Lake Cook Rd, Suite 490, |
| Buffalo Grove, IL, USA, 60089 |
| Buffalo Grove, IL 60089 |
| Attention: Kranti Kambhampati , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ADYQ-VCG001 |
| Name of Grantee: | Vensi,Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Gateway |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.075 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.006 |
| Output power listed is aggregate conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device supports 20MHz and 40 MHz bandwidths. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application GAfU+zxD//vqnbm5Fcmlng==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Vensi,Inc. 750 W Lake Cook Rd, Suite 490, Buffalo Grove, IL, USA, 60089 Buffalo Grove, IL 60089 United States |
Date of Grant: 03/23/2015 Application Dated: 03/23/2015 |
| Attention: Kranti Kambhampati , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ADYQ-VCG001 |
| Name of Grantee: | Vensi,Inc. |
| Equipment Class: | Digital Transmission System |
| Notes: | Gateway |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2412.0 - 2462.0 | 0.075 | ||
| CC | 15C | 2402.0 - 2480.0 | 0.006 |
| Output power listed is aggregate conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Device supports 20MHz and 40 MHz bandwidths. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Eurofins Electrical and Electronic Testing NA, Inc 914 W. Patapsco Avenue Baltimore, MD 21230-3432 |
Date of Grant: 03/23/2015 Application Dated: 03/23/2015 |
| Vensi,Inc. |
| 750 W Lake Cook Rd, Suite 490, |
| Buffalo Grove, IL, USA, 60089 |
| Buffalo Grove, IL 60089 |
| Attention: Kranti Kambhampati , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ADYQ-VCG001 |
| Name of Grantee: | Vensi,Inc. |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | Gateway |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | - |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application 8Rf2+4o0EbLRCnFbnQS55g==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Vensi,Inc. 750 W Lake Cook Rd, Suite 490, Buffalo Grove, IL, USA, 60089 Buffalo Grove, IL 60089 United States |
Date of Grant: 03/23/2015 Application Dated: 03/23/2015 |
| Attention: Kranti Kambhampati , Manager |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ADYQ-VCG001 |
| Name of Grantee: | Vensi,Inc. |
| Equipment Class: | Part 15 Class B Computing Device Peripheral |
| Notes: | Gateway |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15B | - |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: |