1. FCC ID
  2. 2ADYY
  3. 2ADYY-KG6K

FCC ID 2ADYY-KG6K

Mobile phone

by TECNO MOBILE LIMITED

Grantee Code: 2ADYY   Product Code: KG6K
Latest application date: 2021-08-23

FCC ID Device Details

FCC ID2ADYY-KG6K
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2ADYY
Product CodeKG6K
Applicant BusinessTECNO MOBILE LIMITED
Related Domains transsion.com
Equipment ClassMobile phone
Test FirmBay Area Compliance Laboratories Corp. (Shenzhen)

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzOriginal Equipment2021-08-23
5180-5240 MHzOriginal Equipment2021-08-23
709-711 MHzOriginal Equipment2021-08-23
2402-2480 MHzOriginal Equipment2021-08-23

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2022-02-20PDF 864.8 KB
User manualUsers Manual2022-02-20PDF 864.8 KB
Internal PhotosInternal Photos2022-02-20PDF 1.3 MB
External PhotosExternal Photos2022-02-20PDF 688.9 KB
ID Label and Label LocationID Label/Location Info2021-08-23PDF 122.7 KB
Label & LocationID Label/Location Info2021-08-23PDF 122.7 KB
SAR Setup PhotosTest Setup Photos2022-02-20PDF 1.6 MB
Test Setup PhotosTest Setup Photos2022-02-20PDF 310.7 KB
Test Setup PhotosTest Setup Photos2022-02-20PDF 312.2 KB
Report AppendixTest Report2021-08-23PDF 2.1 MB
Test ReportTest Report2021-08-23PDF 4.9 MB
Test ReportTest Report2021-08-23PDF 5.5 MB
Test ReportTest Report2021-08-23PDF 2 MB
Test Report Part 1Test Report2021-08-23PDF 1.4 MB
Test Report part 2Test Report2021-08-23PDF 5.3 MB
Attestation LetterAttestation Statements2021-08-23PDF 50.6 KB
FCC Long and Short term ConfidentialityCover Letter(s)2021-08-23PDF 117.6 KB
FCC Long and Short term confidentialityCover Letter(s)2021-08-23PDF 117.6 KB
SAR Probe & Dipole Cal CertRF Exposure Info2021-08-23PDF 5.6 MB
SAR ReportRF Exposure Info2021-08-23PDF 1.6 MB
SAR Scan PlotsRF Exposure Info2021-08-23PDF 4.9 MB
Block Diagram Metadata onlyBlock DiagramPDF 10.3 KB
Block diagram Metadata onlyBlock DiagramPDF 10.3 KB
Schematics Metadata onlySchematicsPDF 1.2 MB
Circuit Description Metadata onlyOperational DescriptionPDF 93.1 KB
Operation Description Metadata onlyOperational DescriptionPDF 93.1 KB
U-NII Software Security Description Metadata onlyOperational DescriptionPDF 138.6 KB
Parts List Metadata onlyParts List/Tune Up InfoPDF 348.6 KB
Tune-up Procedure Metadata onlyParts List/Tune Up InfoPDF 220 KB

Application Information

Application IDtyhtEx/OSpD9W94oymr5bw==
Final Action Date2021-08-23
Application PurposeOriginal Equipment
Applicant FRN0024206328
ModelKG6K
Frequency Range2402-2480 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionMobile phone
Responsible PartyYiting Luo, yiting.luo@transsion.com , 86-755-61803856
Test FirmWell Wang, Bay Area Compliance Laboratories Corp. (Shenzhen), qa.sz@baclcorp.com , +86 (0) 755 33320018
TCB Emailbacl.regulatory@baclcorp.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date02/20/2022
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power listed is peak conducted. The antenna(s) used for this transmitter must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. SAR compliance for body-worn operating conditions is restricted to belt clips, holsters or similar accessories that have no metallic component in the assembly and must provide a minimum separation distance of 10 mm between the device and the body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory and simultaneous transmission exposure conditions are 0.63 W/kg, 0.21 W/kg and 1.53 W/kg, respectively. This product supports 20 MHz and 40 MHz bandwidth modes.

Applications

Application IDDatePurpose
tyhtEx/OSpD9W94oymr5bw==2021-08-23Original Equipment
lb84YtjA/f0YyaWDQswxgA==2021-08-23Original Equipment
kQMLmLs0QaDauWf+GG8pOw==2021-08-23Original Equipment
JpNNmBxORTPVAljX4uYy+Q==2021-08-23Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRulesGrant Notes
709-711 MHz0.0882.5ppm8M96G7D27
709-711 MHz0.082.5ppm8M96D7W27
826.4-846.6 MHz0.12.5ppm4M22F9W22H
829-844 MHz0.112.5ppm9M00G7D22H
829-844 MHz0.0972.5ppm9M00D7W22H
1712.4-1752.6 MHz0.0492.5ppm4M30F9W27
1720-1745 MHz0.0542.5ppm18M1G7D27
1720-1745 MHz0.0482.5ppm18M1D7W27
1720-1770 MHz0.0532.5ppm18M0G7D27
1720-1770 MHz0.0482.5ppm18M0D7W27
1850.2-1909.8 MHz0.4292.5ppm245KGXW24E
1850.2-1909.8 MHz0.4032.5ppm256KG7W24E
1852.4-1907.6 MHz0.052.5ppm4M26F9W24E
1860-1900 MHz0.052.5ppm18M0G7D24E
1860-1900 MHz0.0452.5ppm18M0D7W24E
2402-2480 MHz0.002000015CCC
2402-2480 MHz0.000415CCC
2412-2472 MHz0.05915CCC
2510-2560 MHz0.0512.5ppm18M0G7D27
2510-2560 MHz0.0472.5ppm18M0D7W27
2540-2650 MHz0.052.5ppm9M00G7D27
2540-2650 MHz0.0432.5ppm8M96D7W27
2545-2645 MHz0.0492.5ppm18M0G7D27
2545-2645 MHz0.0412.5ppm18M0D7W27
2580-2610 MHz0.042.5ppm18M0G7D27
2580-2610 MHz0.0342.5ppm18M0D7W27
5180-5240 MHz0.02315ECC
5745-5825 MHz0.01115ECC

Grants

TCB Grant - Application tyhtEx/OSpD9W94oymr5bw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratory Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
 Date of Grant: 08/23/2021

Application Dated: 08/23/2021
TECNO MOBILE LIMITED
FLAT 39 8/F BLOCK D WAH LOK INDUSTRIAL
CENTRE 31-35 SHAN MEI STREET FOTAN NT
NT,
Hong Kong
 
Attention: Yiting Luo

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ADYY-KG6K
Name of Grantee:  TECNO MOBILE LIMITED
Equipment Class: Digital Transmission System
Notes: Mobile phone
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.0004  
CC 15C 2412.0  -  2472.0 0.059  

Output power listed is peak conducted. The antenna(s) used for this transmitter must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. SAR compliance for body-worn operating conditions is restricted to belt clips, holsters or similar accessories that have no metallic component in the assembly and must provide a minimum separation distance of 10 mm between the device and the body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory and simultaneous transmission exposure conditions are 0.63 W/kg, 0.21 W/kg and 1.53 W/kg, respectively. This product supports 20 MHz and 40 MHz bandwidth modes.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application tyhtEx/OSpD9W94oymr5bw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

TECNO MOBILE LIMITED
FLAT 39 8/F BLOCK D WAH LOK INDUSTRIAL CENTRE 31-35 SHAN MEI STREET FOTAN NT
NT,
Hong Kong 		  Date of Grant: 08/23/2021

Application Dated: 08/23/2021
 
Attention: Yiting Luo

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ADYY-KG6K
Name of Grantee:  TECNO MOBILE LIMITED
Equipment Class: Digital Transmission System
Notes: Mobile phone
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.0004  
CC 15C 2412.0  -  2472.0 0.059  

Output power listed is peak conducted. The antenna(s) used for this transmitter must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. SAR compliance for body-worn operating conditions is restricted to belt clips, holsters or similar accessories that have no metallic component in the assembly and must provide a minimum separation distance of 10 mm between the device and the body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory and simultaneous transmission exposure conditions are 0.63 W/kg, 0.21 W/kg and 1.53 W/kg, respectively. This product supports 20 MHz and 40 MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application lb84YtjA/f0YyaWDQswxgA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratory Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
 Date of Grant: 08/23/2021

Application Dated: 08/23/2021
TECNO MOBILE LIMITED
FLAT 39 8/F BLOCK D WAH LOK INDUSTRIAL
CENTRE 31-35 SHAN MEI STREET FOTAN NT
NT,
Hong Kong
 
Attention: Yiting Luo

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ADYY-KG6K
Name of Grantee:  TECNO MOBILE LIMITED
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Mobile Phone
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15E 5180.0  -  5240.0 0.023  
CC 15E 5745.0  -  5825.0 0.011  

Output power listed is conducted. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.0 cm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, and simultaneous transmission use conditions is 0.70 W/kg, 0.22 W/kg, and 1.53 W/kg, respectively. This device supports 20 MHz, 40 MHz and 80MHz bandwidth modes.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application lb84YtjA/f0YyaWDQswxgA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

TECNO MOBILE LIMITED
FLAT 39 8/F BLOCK D WAH LOK INDUSTRIAL CENTRE 31-35 SHAN MEI STREET FOTAN NT
NT,
Hong Kong 		  Date of Grant: 08/23/2021

Application Dated: 08/23/2021
 
Attention: Yiting Luo

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ADYY-KG6K
Name of Grantee:  TECNO MOBILE LIMITED
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Mobile Phone
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15E 5180.0  -  5240.0 0.023  
CC 15E 5745.0  -  5825.0 0.011  

Output power listed is conducted. SAR compliance for body-worn operating configurations is limited to the specific configurations tested for this filing. Body-worn operations are restricted to belt-clips, holsters or similar accessories that have no metallic component in the assembly and must provide at least 1.0 cm separation between the device and the user's body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, and simultaneous transmission use conditions is 0.70 W/kg, 0.22 W/kg, and 1.53 W/kg, respectively. This device supports 20 MHz, 40 MHz and 80MHz bandwidth modes.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application kQMLmLs0QaDauWf+GG8pOw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratory Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
 Date of Grant: 08/23/2021

Application Dated: 08/23/2021
TECNO MOBILE LIMITED
FLAT 39 8/F BLOCK D WAH LOK INDUSTRIAL
CENTRE 31-35 SHAN MEI STREET FOTAN NT
NT,
Hong Kong
 
Attention: Yiting Luo

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ADYY-KG6K
Name of Grantee:  TECNO MOBILE LIMITED
Equipment Class: PCS Licensed Transmitter held to ear
Notes: Mobile Phone
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
22H 824.2  -  848.8 0.953 2.5  PM 245KGXW
22H 824.2  -  848.8 0.24 2.5  PM 253KG7W
22H 826.4  -  846.6 0.1 2.5  PM 4M22F9W
24E 1850.2  -  1909.8 0.429 2.5  PM 245KGXW
24E 1850.2  -  1909.8 0.403 2.5  PM 256KG7W
24E 1852.4  -  1907.6 0.05 2.5  PM 4M26F9W
27 1712.4  -  1752.6 0.049 2.5  PM 4M30F9W
24E 1860.0  -  1900.0 0.05 2.5  PM 18M0G7D
24E 1860.0  -  1900.0 0.045 2.5  PM 18M0D7W
27 1720.0  -  1745.0 0.054 2.5  PM 18M1G7D
27 1720.0  -  1745.0 0.048 2.5  PM 18M1D7W
22H 829.0  -  844.0 0.11 2.5  PM 9M00G7D
22H 829.0  -  844.0 0.097 2.5  PM 9M00D7W
27 2510.0  -  2560.0 0.051 2.5  PM 18M0G7D
27 2510.0  -  2560.0 0.047 2.5  PM 18M0D7W
27 709.0  -  711.0 0.088 2.5  PM 8M96G7D
27 709.0  -  711.0 0.08 2.5  PM 8M96D7W
27 2580.0  -  2610.0 0.04 2.5  PM 18M0G7D
27 2580.0  -  2610.0 0.034 2.5  PM 18M0D7W
27 2540.0  -  2650.0 0.05 2.5  PM 9M00G7D
27 2540.0  -  2650.0 0.043 2.5  PM 8M96D7W
27 2545.0  -  2645.0 0.049 2.5  PM 18M0G7D
27 2545.0  -  2645.0 0.041 2.5  PM 18M0D7W
27 1720.0  -  1770.0 0.053 2.5  PM 18M0G7D
27 1720.0  -  1770.0 0.048 2.5  PM 18M0D7W

Output power listed is ERP for operation below 1 GHz and EIRP for operation above 1 GHz. LTE supports 1.4/3/5/10/15/20 MHz BW modes in Band 2/4/66, 1.4/3/5/10 MHz BW modes in Band 5, 5/10/15/20 MHz BW modes in Band 7/38/41, 5/10 MHz BW modes in Band 17. The antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. SAR compliance for body-worn operating conditions is restricted to belt clips, holsters or similar accessories that have no metallic component in the assembly and must provide a minimum separation distance of 10 mm between the device and the body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, product specific, and simultaneous transmission exposure conditions are 0.89 W/kg, 0.74 W/kg, 0.96 W/kg, and 1.53 W/kg, respectively.

This device contains functions that are not operational in U.S Territories. This filing is only applicable for US operations.


EAS Grant - Application kQMLmLs0QaDauWf+GG8pOw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

TECNO MOBILE LIMITED
FLAT 39 8/F BLOCK D WAH LOK INDUSTRIAL CENTRE 31-35 SHAN MEI STREET FOTAN NT
NT,
Hong Kong 		  Date of Grant: 08/23/2021

Application Dated: 08/23/2021
 
Attention: Yiting Luo

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ADYY-KG6K
Name of Grantee:  TECNO MOBILE LIMITED
Equipment Class: PCS Licensed Transmitter held to ear
Notes: Mobile Phone
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
22H 824.2  -  848.8 0.953 2.5  PM 245KGXW
22H 824.2  -  848.8 0.24 2.5  PM 253KG7W
22H 826.4  -  846.6 0.1 2.5  PM 4M22F9W
24E 1850.2  -  1909.8 0.429 2.5  PM 245KGXW
24E 1850.2  -  1909.8 0.403 2.5  PM 256KG7W
24E 1852.4  -  1907.6 0.05 2.5  PM 4M26F9W
27 1712.4  -  1752.6 0.049 2.5  PM 4M30F9W
24E 1860.0  -  1900.0 0.05 2.5  PM 18M0G7D
24E 1860.0  -  1900.0 0.045 2.5  PM 18M0D7W
27 1720.0  -  1745.0 0.054 2.5  PM 18M1G7D
27 1720.0  -  1745.0 0.048 2.5  PM 18M1D7W
22H 829.0  -  844.0 0.11 2.5  PM 9M00G7D
22H 829.0  -  844.0 0.097 2.5  PM 9M00D7W
27 2510.0  -  2560.0 0.051 2.5  PM 18M0G7D
27 2510.0  -  2560.0 0.047 2.5  PM 18M0D7W
27 709.0  -  711.0 0.088 2.5  PM 8M96G7D
27 709.0  -  711.0 0.08 2.5  PM 8M96D7W
27 2580.0  -  2610.0 0.04 2.5  PM 18M0G7D
27 2580.0  -  2610.0 0.034 2.5  PM 18M0D7W
27 2540.0  -  2650.0 0.05 2.5  PM 9M00G7D
27 2540.0  -  2650.0 0.043 2.5  PM 8M96D7W
27 2545.0  -  2645.0 0.049 2.5  PM 18M0G7D
27 2545.0  -  2645.0 0.041 2.5  PM 18M0D7W
27 1720.0  -  1770.0 0.053 2.5  PM 18M0G7D
27 1720.0  -  1770.0 0.048 2.5  PM 18M0D7W

Output power listed is ERP for operation below 1 GHz and EIRP for operation above 1 GHz. LTE supports 1.4/3/5/10/15/20 MHz BW modes in Band 2/4/66, 1.4/3/5/10 MHz BW modes in Band 5, 5/10/15/20 MHz BW modes in Band 7/38/41, 5/10 MHz BW modes in Band 17. The antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. SAR compliance for body-worn operating conditions is restricted to belt clips, holsters or similar accessories that have no metallic component in the assembly and must provide a minimum separation distance of 10 mm between the device and the body. End-users must be informed of the body-worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, product specific, and simultaneous transmission exposure conditions are 0.89 W/kg, 0.74 W/kg, 0.96 W/kg, and 1.53 W/kg, respectively.

This device contains functions that are not operational in U.S Territories. This filing is only applicable for US operations.



TCB Grant - Application JpNNmBxORTPVAljX4uYy+Q==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratory Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
 Date of Grant: 08/23/2021

Application Dated: 08/23/2021
TECNO MOBILE LIMITED
FLAT 39 8/F BLOCK D WAH LOK INDUSTRIAL
CENTRE 31-35 SHAN MEI STREET FOTAN NT
NT,
Hong Kong
 
Attention: Yiting Luo

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ADYY-KG6K
Name of Grantee:  TECNO MOBILE LIMITED
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Mobile phone
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.002  

Output power listed is conducted.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application JpNNmBxORTPVAljX4uYy+Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

TECNO MOBILE LIMITED
FLAT 39 8/F BLOCK D WAH LOK INDUSTRIAL CENTRE 31-35 SHAN MEI STREET FOTAN NT
NT,
Hong Kong 		  Date of Grant: 08/23/2021

Application Dated: 08/23/2021
 
Attention: Yiting Luo

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ADYY-KG6K
Name of Grantee:  TECNO MOBILE LIMITED
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Mobile phone
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.002  

Output power listed is conducted.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: