FCC ID 2ADZ3C001
902-928 MHz transceiver module
by Sure-Fi, Inc
Grantee Code: 2ADZ3 Product Code: C001
Latest application date: 2017-07-05
FCC ID Device Details
| FCC ID | 2ADZ3C001 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2ADZ3 |
| Product Code | C001 |
| Applicant Business | Sure-Fi, Inc 🇺🇸 |
| Related Domains |  hiddenbutler.com |
| Equipment Class | 902-928 MHz transceiver module |
| Test Firm | VPI Laboratories, Inc. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 902.5-927.35 MHz | Original Equipment | 2017-07-05 |
| 902.5-927.35 MHz | Original Equipment | 2017-07-05 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| User Manual | Users Manual | 2017-07-05 | PDF 293.4 KB |
| Internal Photos | Internal Photos | 2017-07-05 | PDF 528.8 KB |
| External Photos | External Photos | 2017-07-05 | PDF 140.5 KB |
| Label Location | ID Label/Location Info | 2017-07-05 | PDF 247.3 KB |
| Label Sample | ID Label/Location Info | 2017-07-05 | PDF 247.3 KB |
| Test Setup Photos | Test Setup Photos | 2017-07-05 | PDF 806 KB |
| Test Report | Test Report | 2017-07-05 | PDF 2.6 MB |
| Test Report | Test Report | 2017-07-05 | PDF 2 MB |
| Agent Authorization Letter | Cover Letter(s) | 2017-07-05 | PDF 129.9 KB |
| Confidentiality Letter | Cover Letter(s) | 2017-07-05 | PDF 116.6 KB |
| Modular Approval Letter | Cover Letter(s) | 2017-07-05 | PDF 310.1 KB |
| RF Exposure | RF Exposure Info | 2017-07-05 | PDF 169.2 KB |
| RF Exposure | RF Exposure Info | 2017-07-05 | PDF 169.2 KB |
| Block Diagram Metadata only | Block Diagram | PDF 54.3 KB | |
| Schematics Metadata only | Schematics | PDF 163.9 KB | |
| Operational Description Metadata only | Operational Description | PDF 36.3 KB | |
| Part List Metadata only | Parts List/Tune Up Info | PDF 33.1 KB |
Application Information
| Application ID | lrjFBpYxOlth/oXHmp05rA== |
|---|---|
| Final Action Date | 2017-07-05 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0024187403 |
| Model | C001 |
| Frequency Range | 902.5-927.35 MHz |
| Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| Device Description | 902-928 MHz transceiver module |
| Responsible Party | Mark D Hall, President, mdhall@hiddenbutler.com , 801-362-9571 |
| Test Firm | Jason Stewart, VPI Laboratories, Inc., jasons@vpimfg.com  , 801-495-2310 |
| TCB Email | tei@timcoengr.com  |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | Yes |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter or in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| lrjFBpYxOlth/oXHmp05rA== | 2017-07-05 | Original Equipment |
| bNqmNoMlHbk4GvYVcCW3QA== | 2017-07-05 | Original Equipment |
Grants
TCB Grant - Application lrjFBpYxOlth/oXHmp05rA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 07/05/2017 Application Dated: 07/05/2017 |
| Sure-Fi, Inc |
| 3000 Vista Way |
| Suite 1 |
| Provo, UT 84606 |
| Attention: Mark Hall , President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ADZ3C001 |
| Name of Grantee: | Sure-Fi, Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 902-928 MHz transceiver module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.5 - 927.35 | 0.9977 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter or in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. |
EAS Grant - Application lrjFBpYxOlth/oXHmp05rA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Sure-Fi, Inc 3000 Vista Way Suite 1 Provo, UT 84606 United States |
Date of Grant: 07/05/2017 Application Dated: 07/05/2017 |
| Attention: Mark Hall , President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ADZ3C001 |
| Name of Grantee: | Sure-Fi, Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | 902-928 MHz transceiver module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.5 - 927.35 | 0.9977 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter or in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 |
Date of Grant: 07/05/2017 Application Dated: 07/05/2017 |
| Sure-Fi, Inc |
| 3000 Vista Way |
| Suite 1 |
| Provo, UT 84606 |
| Attention: Mark Hall , President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ADZ3C001 |
| Name of Grantee: | Sure-Fi, Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | 902-928 MHz transceiver module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.5 - 927.35 | 0.547 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter or in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. |
EAS Grant - Application bNqmNoMlHbk4GvYVcCW3QA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Sure-Fi, Inc 3000 Vista Way Suite 1 Provo, UT 84606 United States |
Date of Grant: 07/05/2017 Application Dated: 07/05/2017 |
| Attention: Mark Hall , President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2ADZ3C001 |
| Name of Grantee: | Sure-Fi, Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | 902-928 MHz transceiver module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.5 - 927.35 | 0.547 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter or in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. |
| Mail To: |