FCC ID 2ADZRA240ZA

A-240Z-A

by Nokia Shanghai Bell Co. Ltd.

Grantee Code: 2ADZR   Product Code: A240ZA
Latest application date: 2017-09-30

Device Images

FCC ID Device Details

FCC ID2ADZRA240ZA
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2ADZR
Product CodeA240ZA
Applicant BusinessNokia Shanghai Bell Co. Ltd. 🇨🇳
Related Domains nokia-sbell.com
Equipment ClassA-240Z-A
Test FirmMRT Technology (Suzhou) Co., Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2017-09-30
5180-5240 MHzOriginal Equipment2017-06-23
908.4-916 MHzOriginal Equipment2017-06-23
2405-2475 MHzOriginal Equipment2017-06-23

Exhibits

DocumentTypeAvailableFile
User GuideUsers Manual2017-06-23PDF 5 MB
Internal picture_1Internal Photos2017-06-23PDF 835.9 KB
External pictureExternal Photos2017-09-30PDF 376.1 KB
External picture_1External Photos2017-06-23PDF 355.4 KB
Label&LocationID Label/Location Info2017-06-23PDF 147.4 KB
Test SetupTest Setup Photos2017-09-30PDF 431.2 KB
Test SetupTest Setup Photos2017-06-23PDF 313.1 KB
FCC DFS ReportTest Report2017-09-30PDF 1.9 MB
FCC U-NII Test report Metadata onlyTest Report2017-09-30PDF 4.7 MB
Test reportTest Report2017-09-30PDF 4.6 MB
Report FCC U-NIITest Report2017-06-23PDF 4 MB
Report-2.4G bandTest Report2017-06-23PDF 3.1 MB
Report-ZwaveTest Report2017-06-23PDF 441.1 KB
Report-zigbeeTest Report2017-06-23PDF 2.7 MB
FCC Class II Permissive Change DeclarationCover Letter(s)2017-09-30PDF 191.1 KB
Declaration letter-Channnel 12,13Cover Letter(s)2017-06-23PDF 207.1 KB
FCC AgentCover Letter(s)2017-06-23PDF 200.8 KB
FCC ConfidentialityCover Letter(s)2017-06-23PDF 392 KB
FCC DOC LetterCover Letter(s)2017-06-23PDF 247.6 KB
U-NII Device SecurityCover Letter(s)2017-06-23PDF 350.5 KB
FCC MPERF Exposure Info2017-09-30PDF 159.1 KB
FCC MPE_1RF Exposure Info2017-06-23PDF 140.2 KB
Confidential_Block Diagram Metadata onlyBlock DiagramPDF 198.1 KB
Confidential_Block Diagram_1 Metadata onlyBlock DiagramPDF 255.4 KB
Confidential_Schematics Metadata onlySchematicsPDF 357 KB
Confidential_Operation Discription Metadata onlyOperational DescriptionPDF 154.7 KB
Confidential_Operation Discription_1 Metadata onlyOperational DescriptionPDF 154.6 KB
Datasheet-2.4G Antenna Metadata onlyOperational DescriptionPDF 509.7 KB
Datasheet-5G Antenna Metadata onlyOperational DescriptionPDF 558.7 KB
Datasheet-Z-Wave Antenna Metadata onlyOperational DescriptionPDF 632.3 KB
U-NII Device Security Metadata onlyOperational DescriptionPDF 350.5 KB
U-NII Device Security_1 Metadata onlyOperational DescriptionPDF 363.4 KB

Application Information

Application IDx1cI4d1k4corZfmVYi4eAQ==
Final Action Date2017-09-30
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0024217564
ModelA240ZA
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionA-240Z-A
Responsible PartyYong Tu, Hardware Advisory engineer, yong.tu@nokia-sbell.com , 86-21-38439795
Technical ContactWakeyou Wang, Intertek Testing Services Limited Shanghai, wakeyou.wang@intertek.com , 86-21-61278448
Test FirmMr. Marlin Chen, MRT Technology (Suzhou) Co., Ltd., marlinchen@mrt-cert.com , +86-512-66308358
TCB Emailhotline@acbcert.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryYes
Grant CommentsClass II Permissive Change to add UNII Band 2-A and 2-C. Output power listed is conducted. Device is an 802.11a/n/ac device in a 4x4 Spatial Multiplexing MIMO configuration as described in this filing.The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be colocated with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has a 20 MHz, 40 MHz and 80 MHz bandwidth mode. This device contains also 2.4G WLAN, ZigBee and Zwave transmitters.

Applications

Application IDDatePurpose
x1cI4d1k4corZfmVYi4eAQ==2017-09-30Class II permissive change or modification of presently authorized equipment
Mknlvmxgj2k0+oArWzb0Sg==2017-06-23Original Equipment
AgasNVU8EeUSPJaGUnWAnA==2017-06-23Original Equipment
7ZE+l6YoW7ENIkpO3UJ+Gg==2017-06-23Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
908.4-916 MHz0.003000015CCC
2405-2475 MHz0.03415CCC
2412-2462 MHz0.47415CCC, MO
5180-5240 MHz0.91215E38, CC, MO
5260-5320 MHz0.24315E38, CC, MO, ND
5500-5720 MHz0.23115E38, CC, MO, ND
5745-5825 MHz0.55715E38, CC, MO

Grants

TCB Grant - Application x1cI4d1k4corZfmVYi4eAQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 09/30/2017

Application Dated: 07/17/2017
Nokia Shanghai Bell Co. Ltd.
No. 388, Ningqiao Rd.
Pilot Free Trade Zone
Shanghai, 201206
China
 
Attention: Yong Tu , Hardware Advisory engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ADZRA240ZA
Name of Grantee:  Nokia Shanghai Bell Co. Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: A-240Z-A
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.912  
38 CC MO ND 15E 5260.0  -  5320.0 0.243  
38 CC MO ND 15E 5500.0  -  5720.0 0.231  
38 CC MO 15E 5745.0  -  5825.0 0.557  

Class II Permissive Change to add UNII Band 2-A and 2-C.

Output power listed is conducted. Device is an 802.11a/n/ac device in a 4x4 Spatial Multiplexing MIMO configuration as described in this filing.The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be colocated with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has a 20 MHz, 40 MHz and 80 MHz bandwidth mode.

This device contains also 2.4G WLAN, ZigBee and Zwave transmitters.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application x1cI4d1k4corZfmVYi4eAQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Nokia Shanghai Bell Co. Ltd.
No. 388, Ningqiao Rd. Pilot Free Trade Zone
Shanghai, 201206
China
  Date of Grant: 09/30/2017

Application Dated: 07/17/2017
 
Attention: Yong Tu , Hardware Advisory engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ADZRA240ZA
Name of Grantee:  Nokia Shanghai Bell Co. Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: A-240Z-A
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.912  
38 CC MO ND 15E 5260.0  -  5320.0 0.243  
38 CC MO ND 15E 5500.0  -  5720.0 0.231  
38 CC MO 15E 5745.0  -  5825.0 0.557  

Class II Permissive Change to add UNII Band 2-A and 2-C.

Output power listed is conducted. Device is an 802.11a/n/ac device in a 4x4 Spatial Multiplexing MIMO configuration as described in this filing.The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be colocated with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This device has a 20 MHz, 40 MHz and 80 MHz bandwidth mode.

This device contains also 2.4G WLAN, ZigBee and Zwave transmitters.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application Mknlvmxgj2k0+oArWzb0Sg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 06/23/2017

Application Dated: 06/22/2017
Nokia Shanghai Bell Co. Ltd.
No. 388, Ningqiao Rd.
Pilot Free Trade Zone
Shanghai, 201206
China
 
Attention: Yong Tu , Hardware Advisory engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ADZRA240ZA
Name of Grantee:  Nokia Shanghai Bell Co. Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Digital Home CPE
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.912  
38 CC MO 15E 5745.0  -  5825.0 0.557  

Output power listed is conducted. Device is an 802.11a/n/ac device in a 4x4 Spatial Multiplexing MIMO configuration as described in this filing.The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be colocated with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.

This device has a 20 MHz, 40 MHz and 80 MHz bandwidth mode.

This device contains also 2.4G WLAN, ZigBee and Zwave transmitters.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application Mknlvmxgj2k0+oArWzb0Sg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Nokia Shanghai Bell Co. Ltd.
No. 388, Ningqiao Rd. Pilot Free Trade Zone
Shanghai, 201206
China
  Date of Grant: 06/23/2017

Application Dated: 06/22/2017
 
Attention: Yong Tu , Hardware Advisory engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ADZRA240ZA
Name of Grantee:  Nokia Shanghai Bell Co. Ltd.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Digital Home CPE
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5180.0  -  5240.0 0.912  
38 CC MO 15E 5745.0  -  5825.0 0.557  

Output power listed is conducted. Device is an 802.11a/n/ac device in a 4x4 Spatial Multiplexing MIMO configuration as described in this filing.The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be colocated with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.

This device has a 20 MHz, 40 MHz and 80 MHz bandwidth mode.

This device contains also 2.4G WLAN, ZigBee and Zwave transmitters.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application AgasNVU8EeUSPJaGUnWAnA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 06/23/2017

Application Dated: 06/22/2017
Nokia Shanghai Bell Co. Ltd.
No. 388, Ningqiao Rd.
Pilot Free Trade Zone
Shanghai, 201206
China
 
Attention: Yong Tu , Hardware Advisory engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ADZRA240ZA
Name of Grantee:  Nokia Shanghai Bell Co. Ltd.
Equipment Class: Part 15 Low Power Communication Device Transmitter
Notes: Digital Home CPE
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 908.4  -  916.0 0.003  

This device contains also WLAN and Zigbee transmitters.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application AgasNVU8EeUSPJaGUnWAnA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Nokia Shanghai Bell Co. Ltd.
No. 388, Ningqiao Rd. Pilot Free Trade Zone
Shanghai, 201206
China
  Date of Grant: 06/23/2017

Application Dated: 06/22/2017
 
Attention: Yong Tu , Hardware Advisory engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ADZRA240ZA
Name of Grantee:  Nokia Shanghai Bell Co. Ltd.
Equipment Class: Part 15 Low Power Communication Device Transmitter
Notes: Digital Home CPE
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 908.4  -  916.0 0.003  

This device contains also WLAN and Zigbee transmitters.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 7ZE+l6YoW7ENIkpO3UJ+Gg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 06/23/2017

Application Dated: 06/22/2017
Nokia Shanghai Bell Co. Ltd.
No. 388, Ningqiao Rd.
Pilot Free Trade Zone
Shanghai, 201206
China
 
Attention: Yong Tu , Hardware Advisory engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ADZRA240ZA
Name of Grantee:  Nokia Shanghai Bell Co. Ltd.
Equipment Class: Digital Transmission System
Notes: Digital Home CPE
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.474  
CC 15C 2405.0  -  2475.0 0.034  

Output power listed is conducted. Device is a 802.11 bgn device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.

This device has 20 MHz and 40 MHz bandwidth modes.

This device contains 5G WLAN and Zwave transmitters.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application 7ZE+l6YoW7ENIkpO3UJ+Gg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Nokia Shanghai Bell Co. Ltd.
No. 388, Ningqiao Rd. Pilot Free Trade Zone
Shanghai, 201206
China
  Date of Grant: 06/23/2017

Application Dated: 06/22/2017
 
Attention: Yong Tu , Hardware Advisory engineer

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2ADZRA240ZA
Name of Grantee:  Nokia Shanghai Bell Co. Ltd.
Equipment Class: Digital Transmission System
Notes: Digital Home CPE
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.474  
CC 15C 2405.0  -  2475.0 0.034  

Output power listed is conducted. Device is a 802.11 bgn device in a 2x2 Spatial Multiplexing MIMO configuration as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter.

This device has 20 MHz and 40 MHz bandwidth modes.

This device contains 5G WLAN and Zwave transmitters.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: