FCC ID 2AE3WEXT2052CB

WiFi Transceiver Module

by Extron Electronics

Grantee Code: 2AE3W   Product Code: EXT2052CB
Latest application date: 2015-11-02

FCC ID Device Details

FCC ID2AE3WEXT2052CB
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AE3W
Product CodeEXT2052CB
Applicant BusinessExtron Electronics 🇺🇸
Related Domains extron.com
Equipment ClassWiFi Transceiver Module
Test FirmLaird Connectivity, Inc

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5180-5240 MHzClass II permissive change or modification of presently authorized equipment2015-11-02
2412-2462 MHzClass II permissive change or modification of presently authorized equipment2015-11-02
2402-2480 MHzChange in identification of presently authorized equipment. Original FCC ID: TFB-TIWI501 Grant Date: 08/10/20122015-09-02
2402-2480 MHzChange in identification of presently authorized equipment. Original FCC ID: TFB-TIWI501 Grant Date: 08/10/20122015-09-02
5180-5240 MHzChange in identification of presently authorized equipment. Original FCC ID: TFB-TIWI501 Grant Date: 08/10/20122015-09-02

Exhibits

DocumentTypeAvailableFile
EXTRON WiFi User Manual - Rev FUsers Manual2016-04-30PDF 440.9 KB
Exhibit D - Internal PhotosInternal Photos2016-04-30PDF 1.1 MB
Exhibit C - External PhotosExternal Photos2016-04-30PDF 1,006.6 KB
External Photos Metadata onlyCover Letter(s)2015-09-02PDF 717.2 KB
External PhotosExternal Photos2015-09-02PDF 717.2 KB
LabelID Label/Location Info2015-09-02PDF 180.2 KB
Exhibit B -Test Setup PhotosTest Setup Photos2016-04-30PDF 832.6 KB
1947-1 DTS Test Report Rev. CTest Report2015-11-02PDF 3.8 MB
1947-2 UNII Test Report Rev. CTest Report2015-11-02PDF 5.4 MB
1. FCC agent auth letter (UL Verification Services Inc.)Cover Letter(s)2015-11-02PDF 71.9 KB
1a FCC C2PC Letter.docCover Letter(s)2015-11-02PDF 95.7 KB
Extron WiFi changes and operation letter-08-21-2015Cover Letter(s)2015-11-02PDF 72.5 KB
FCC Request for Confidentiality letterCover Letter(s)2015-11-02PDF 77.5 KB
Agent Authorization LetterCover Letter(s)2015-09-02PDF 71.9 KB
Extron FCC Application LetterCover Letter(s)2015-09-02PDF 66 KB
LSR auth. letter for ID ChangeCover Letter(s)2015-09-02PDF 480.7 KB
Exhibit A - RF Exposure AssessmentRF Exposure Info2015-11-02PDF 517.6 KB
Board Block Diagram-V4.0 Metadata onlyBlock DiagramPDF 94.3 KB
Schematics Metadata onlySchematicsPDF 56.5 KB
Antenna spec Metadata onlyOperational DescriptionPDF 431.9 KB

Application Information

Application IDXAFdy3wN8vZuD06VRrkx4g==
Final Action Date2015-11-02
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0019024124
ModelEXT2052CB
Frequency Range5180-5240 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionWiFi Transceiver Module
Responsible PartyHomi Ahmadi, Director of Compliance Engineering, hahmadi@extron.com , 714-491-1500
Test FirmAdam Alger, Laird Connectivity, Inc, adam.alger@lairdconnect.com , 262 375 3091
TCB EmailLST.FRE.CertNotice@ul.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date04/30/2016
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentSingle Modular Approval
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsClass II permissive change filing to comply with New U-NII-3 rule per FCC ET docket No. 13-49 with additional antenna and disabled Bluetooth 2.1+EDR/LE functions. Power Output listed is Conducted. Modular Approval. This device is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This transmitter is restricted to indoor use only within the 5.15-5.25GHz bands. This client only module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
XAFdy3wN8vZuD06VRrkx4g==2015-11-02Class II permissive change or modification of presently authorized equipment
8Cu2jNCu7pznk7V1Rv5VHg==2015-11-02Class II permissive change or modification of presently authorized equipment
vUAr4zq1amwRdfL4dKCrpA==2015-09-02Change in identification of presently authorized equipment. Original FCC ID: TFB-TIWI501 Grant Date: 08/10/2012
IQqBIeICpYLYfyUed41w4A==2015-09-02Change in identification of presently authorized equipment. Original FCC ID: TFB-TIWI501 Grant Date: 08/10/2012
FS27RaICyi4RCAuT9u00mQ==2015-09-02Change in identification of presently authorized equipment. Original FCC ID: TFB-TIWI501 Grant Date: 08/10/2012

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.008915CCC
2402-2480 MHz0.012100015CCC
2412-2462 MHz0.158500015CCC
2412-2462 MHz0.158515CCC
5180-5240 MHz0.023415ECC
5180-5240 MHz0.023415E38, CC
5260-5320 MHz0.05115ECC, ND
5260-5320 MHz0.05115E38, CC, ND
5470-5725 MHz0.0415ECC, ND
5470-5725 MHz0.0415E38, CC, ND
5745-5825 MHz0.114815CCC
5745-5825 MHz0.114815E38, CC

Grants

TCB Grant - Application XAFdy3wN8vZuD06VRrkx4g==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 11/02/2015

Application Dated: 11/02/2015
Extron Electronics
1025 E. Ball Road
Anaheim, CA 92805
 
Attention: Homi Ahmadi , Director of Compliance Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AE3WEXT2052CB
Name of Grantee:  Extron Electronics
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: WiFi Transceiver Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC 15E 5180.0  -  5240.0 0.0234  
38 CC ND 15E 5260.0  -  5320.0 0.051  
38 CC ND 15E 5470.0  -  5725.0 0.04  
38 CC 15E 5745.0  -  5825.0 0.1148  

Class II permissive change filing to comply with New U-NII-3 rule per FCC ET docket No. 13-49 with additional antenna and disabled Bluetooth 2.1+EDR/LE functions. Power Output listed is Conducted. Modular Approval. This device is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This transmitter is restricted to indoor use only within the 5.15-5.25GHz bands. This client only module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application XAFdy3wN8vZuD06VRrkx4g==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Extron Electronics
1025 E. Ball Road
Anaheim, CA 92805
United States
  Date of Grant: 11/02/2015

Application Dated: 11/02/2015
 
Attention: Homi Ahmadi , Director of Compliance Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AE3WEXT2052CB
Name of Grantee:  Extron Electronics
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: WiFi Transceiver Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC 15E 5180.0  -  5240.0 0.0234  
38 CC ND 15E 5260.0  -  5320.0 0.051  
38 CC ND 15E 5470.0  -  5725.0 0.04  
38 CC 15E 5745.0  -  5825.0 0.1148  

Class II permissive change filing to comply with New U-NII-3 rule per FCC ET docket No. 13-49 with additional antenna and disabled Bluetooth 2.1+EDR/LE functions. Power Output listed is Conducted. Modular Approval. This device is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This transmitter is restricted to indoor use only within the 5.15-5.25GHz bands. This client only module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application vUAr4zq1amwRdfL4dKCrpA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 09/02/2015

Application Dated: 09/01/2015
Extron Electronics
1025 E. Ball Road
Anaheim, CA 92805
 
Attention: Homi Ahmadi , Director of Compliance Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AE3WEXT2052CB
Name of Grantee:  Extron Electronics
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: WiFi Transceiver Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0121  

Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application vUAr4zq1amwRdfL4dKCrpA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Extron Electronics
1025 E. Ball Road
Anaheim, CA 92805
United States
  Date of Grant: 09/02/2015

Application Dated: 09/01/2015
 
Attention: Homi Ahmadi , Director of Compliance Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AE3WEXT2052CB
Name of Grantee:  Extron Electronics
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: WiFi Transceiver Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0121  

Power Output listed is conducted. Modular Approval. The antenna(s) used for this transmitter must not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application IQqBIeICpYLYfyUed41w4A==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 09/02/2015

Application Dated: 09/01/2015
Extron Electronics
1025 E. Ball Road
Anaheim, CA 92805
 
Attention: Homi Ahmadi , Director of Compliance Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AE3WEXT2052CB
Name of Grantee:  Extron Electronics
Equipment Class: Digital Transmission System
Notes: WiFi Transceiver Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0089  
CC 15C 2412.0  -  2462.0 0.1585  
CC 15C 5745.0  -  5825.0 0.1148  

Power Output listed is Conducted. Modular Approval. This device is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This client only module can only be used with a host antenna circuit trace layouts designed in strict compliance with the OEM instructions provided. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application IQqBIeICpYLYfyUed41w4A==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Extron Electronics
1025 E. Ball Road
Anaheim, CA 92805
United States
  Date of Grant: 09/02/2015

Application Dated: 09/01/2015
 
Attention: Homi Ahmadi , Director of Compliance Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AE3WEXT2052CB
Name of Grantee:  Extron Electronics
Equipment Class: Digital Transmission System
Notes: WiFi Transceiver Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2402.0  -  2480.0 0.0089  
CC 15C 2412.0  -  2462.0 0.1585  
CC 15C 5745.0  -  5825.0 0.1148  

Power Output listed is Conducted. Modular Approval. This device is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This client only module can only be used with a host antenna circuit trace layouts designed in strict compliance with the OEM instructions provided. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application FS27RaICyi4RCAuT9u00mQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 09/02/2015

Application Dated: 09/01/2015
Extron Electronics
1025 E. Ball Road
Anaheim, CA 92805
 
Attention: Homi Ahmadi , Director of Compliance Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AE3WEXT2052CB
Name of Grantee:  Extron Electronics
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: WiFi Transceiver Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.0234  
CC ND 15E 5260.0  -  5320.0 0.051  
CC ND 15E 5470.0  -  5725.0 0.04  

Power Output listed is Conducted. Modular Approval. This device is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This transmitter is restricted to indoor use only within the 5.15-5.25GHz bands. This client only module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application FS27RaICyi4RCAuT9u00mQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Extron Electronics
1025 E. Ball Road
Anaheim, CA 92805
United States
  Date of Grant: 09/02/2015

Application Dated: 09/01/2015
 
Attention: Homi Ahmadi , Director of Compliance Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AE3WEXT2052CB
Name of Grantee:  Extron Electronics
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: WiFi Transceiver Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.0234  
CC ND 15E 5260.0  -  5320.0 0.051  
CC ND 15E 5470.0  -  5725.0 0.04  

Power Output listed is Conducted. Modular Approval. This device is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. This transmitter is restricted to indoor use only within the 5.15-5.25GHz bands. This client only module can only be used with a host antenna circuit trace layout design in strict compliance with the OEM instructions provided. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application 8Cu2jNCu7pznk7V1Rv5VHg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  UL Verification Services Inc. (formerly UL CCS)
47173 Benicia Street
Fremont, CA 94538
Date of Grant: 11/02/2015

Application Dated: 11/02/2015
Extron Electronics
1025 E. Ball Road
Anaheim, CA 92805
 
Attention: Homi Ahmadi , Director of Compliance Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AE3WEXT2052CB
Name of Grantee:  Extron Electronics
Equipment Class: Digital Transmission System
Notes: WiFi Transceiver Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.1585  

Class II permissive change filing to show compliance with New U-NII-3 rule per FCC ET docket No. 13-49 with additional antenna and disabled Bluetooth 2.1+EDR/LE functions. Power Output listed is Conducted. Modular Approval. This device is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This client only module can only be used with a host antenna circuit trace layouts designed in strict compliance with the OEM instructions provided. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application 8Cu2jNCu7pznk7V1Rv5VHg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Extron Electronics
1025 E. Ball Road
Anaheim, CA 92805
United States
  Date of Grant: 11/02/2015

Application Dated: 11/02/2015
 
Attention: Homi Ahmadi , Director of Compliance Engineering

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AE3WEXT2052CB
Name of Grantee:  Extron Electronics
Equipment Class: Digital Transmission System
Notes: WiFi Transceiver Module
Modular Type: Single Modular
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.1585  

Class II permissive change filing to show compliance with New U-NII-3 rule per FCC ET docket No. 13-49 with additional antenna and disabled Bluetooth 2.1+EDR/LE functions. Power Output listed is Conducted. Modular Approval. This device is granted for use in Mobile only configurations in which the antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. Only those antenna(s) tested with the device or similar antenna(s) with equal or lesser gain may be used with this transmitter. This client only module can only be used with a host antenna circuit trace layouts designed in strict compliance with the OEM instructions provided. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: