1. FCC ID
  2. 2AE6A
  3. 2AE6A-GL2120TH

FCC ID 2AE6A-GL2120TH

Thermal Printer

by ZippyYum LLC

Grantee Code: 2AE6A   Product Code: GL2120TH
Latest application date: 2019-10-31

FCC ID Device Details

FCC ID2AE6A-GL2120TH
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AE6A
Product CodeGL2120TH
Applicant BusinessZippyYum LLC 🇺🇸
Related Domains gotocme.com
Equipment ClassThermal Printer
Test FirmShenzhen HUAK Testing Technology Co., Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzOriginal Equipment2019-10-31
2402-2480 MHzOriginal Equipment2019-10-31

Exhibits

DocumentTypeAvailableFile
User manualUsers Manual2019-10-31PDF 2.5 MB
Internal photosInternal Photos2019-10-31PDF 604.4 KB
External photosExternal Photos2019-10-31PDF 525.5 KB
label and label locationID Label/Location Info2019-10-31PDF 599.9 KB
Test setup photosTest Setup Photos2019-10-31PDF 291.6 KB
Test report-DSSTest Report2019-10-31PDF 3.7 MB
Test report-DTSTest Report2019-10-31PDF 3.1 MB
FCC Confidentiality request letterCover Letter(s)2019-10-31PDF 121.1 KB
PoACover Letter(s)2019-10-31PDF 45.5 KB
RF exposure info-MPERF Exposure Info2019-10-31PDF 104.1 KB
Block diagram Metadata onlyBlock DiagramPDF 161.9 KB
Schematic_Main Metadata onlySchematicsPDF 580.9 KB
Schematic_Modules Metadata onlySchematicsPDF 69.6 KB
Declaration concerning Antenna Specification Metadata onlyOperational DescriptionPDF 91.8 KB
Operation Description Metadata onlyOperational DescriptionPDF 170.8 KB

Application Information

Application IDti4d+DjyuSXc/LB3iBIYOQ==
Final Action Date2019-10-31
Application PurposeOriginal Equipment
Applicant FRN0024703217
ModelGL2120TH
Frequency Range2402-2480 MHz
Equipment ClassDSS - Part 15 Spread Spectrum Transmitter
Device DescriptionThermal Printer
Responsible PartyDaniel Riscalla, CEO, daniel.riscalla@gotocme.com , +1(888)636-7557
Test FirmJason Zhou, Shenzhen HUAK Testing Technology Co., Ltd., jason@cer-mark.com , +86-755-23029901
TCB Emailjoergkusig@eurofins.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput Power listed is peak conducted. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
ti4d+DjyuSXc/LB3iBIYOQ==2019-10-31Original Equipment
9+MU3SW7YcmLiVqWP0uGtA==2019-10-31Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2402-2480 MHz0.002900015CCC
2402-2480 MHz0.006200015CCC

Grants

TCB Grant - Application ti4d+DjyuSXc/LB3iBIYOQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Eurofins Product Service GmbH
Storkower Strasse 38c
D-15526 Reichenwalde,
Germany 		Date of Grant: 10/31/2019

Application Dated: 10/29/2019
ZippyYum LLC
1073 N. Batavia St., Unit A
P.O. Box N.A.,
Orange, CA 92867
 
Attention: Daniel Riscalla , CEO

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AE6A-GL2120TH
Name of Grantee:  ZippyYum LLC
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Thermal Printer
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.0062  

Output Power listed is peak conducted. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application ti4d+DjyuSXc/LB3iBIYOQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

ZippyYum LLC
1073 N. Batavia St., Unit A P.O. Box N.A.,
Orange, CA 92867
United States 		  Date of Grant: 10/31/2019

Application Dated: 10/29/2019
 
Attention: Daniel Riscalla , CEO

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AE6A-GL2120TH
Name of Grantee:  ZippyYum LLC
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Thermal Printer
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.0062  

Output Power listed is peak conducted. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application 9+MU3SW7YcmLiVqWP0uGtA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Eurofins Product Service GmbH
Storkower Strasse 38c
D-15526 Reichenwalde,
Germany 		Date of Grant: 10/31/2019

Application Dated: 10/29/2019
ZippyYum LLC
1073 N. Batavia St., Unit A
P.O. Box N.A.,
Orange, CA 92867
 
Attention: Daniel Riscalla , CEO

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AE6A-GL2120TH
Name of Grantee:  ZippyYum LLC
Equipment Class: Digital Transmission System
Notes: Thermal Printer
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.0029  

Output Power listed is peak conducted.

RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application 9+MU3SW7YcmLiVqWP0uGtA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

ZippyYum LLC
1073 N. Batavia St., Unit A P.O. Box N.A.,
Orange, CA 92867
United States 		  Date of Grant: 10/31/2019

Application Dated: 10/29/2019
 
Attention: Daniel Riscalla , CEO

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AE6A-GL2120TH
Name of Grantee:  ZippyYum LLC
Equipment Class: Digital Transmission System
Notes: Thermal Printer
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
CC 15C 2402.0  -  2480.0 0.0029  

Output Power listed is peak conducted.

RF exposure compliance is addressed for 1.1310 and 2.1091 MPE limits. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. End Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

Mail To: