FCC ID 2AEIM-WL18DBMOD
WiFi and Bluetooth Module
by Tesla, Inc
Grantee Code: 2AEIM Product Code: WL18DBMOD
Latest application date: 2023-02-21
FCC ID Device Details
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 5745-5825 MHz | Class II permissive change or modification of presently authorized equipment | 2023-02-21 |
| 2412-2462 MHz | Class II permissive change or modification of presently authorized equipment | 2023-02-21 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: Z64-WL18DBMOD Grant Date: 12/24/2014 | 2023-01-18 |
| 5180-5240 MHz | Change in identification of presently authorized equipment. Original FCC ID: Z64-WL18DBMOD Grant Date: 12/24/2014 | 2023-01-18 |
| 2402-2480 MHz | Change in identification of presently authorized equipment. Original FCC ID: Z64-WL18DBMOD Grant Date: 12/24/2014 | 2023-01-18 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Host User Manual | Users Manual | 2023-08-21 | PDF 4.5 MB |
| IntPho (FCC) | Internal Photos | 2023-08-21 | PDF 1.6 MB |
| ExtPho (FCC) | External Photos | 2023-08-21 | PDF 343 KB |
| ExtPho | External Photos | 2023-01-18 | PDF 750.6 KB |
| Host Label Info | ID Label/Location Info | 2023-02-21 | PDF 1.2 MB |
| Label Info | ID Label/Location Info | 2023-01-18 | PDF 38.9 KB |
| 2AEIM-WL18DBMOD_Tsup_DTS_WIFI 2.4G | Test Setup Photos | 2023-08-21 | PDF 346.2 KB |
| 2AEIM-WL18DBMOD_Tsup_NII_WLAN5.2-5.6G | Test Setup Photos | 2023-08-21 | PDF 330.2 KB |
| 2AEIM-WL18DBMOD_Tsup_NII_WLAN5.8G | Test Setup Photos | 2023-08-21 | PDF 338.9 KB |
| Antenna Test Report (photo) | Test Setup Photos | 2023-08-21 | PDF 230.5 KB |
| 2AEIM-WL18DBMOD_TR_DTS_WIFI 2.4G_r1 | Test Report | 2023-02-21 | PDF 2.3 MB |
| 2AEIM-WL18DBMOD_TR_NII_WLAN5.2-5.6G | Test Report | 2023-02-21 | PDF 3.2 MB |
| 2AEIM-WL18DBMOD_TR_NII_WLAN5.8G | Test Report | 2023-02-21 | PDF 2 MB |
| Antenna Test Report | Test Report | 2023-02-21 | PDF 2.6 MB |
| 2AEIM-WL18DBMOD_cvrltr_Certification concerning covered equipment | Attestation Statements | 2023-02-21 | PDF 28.5 KB |
| 2AEIM-WL18DBMOD_cvrltr_Certification designating a U.S. agent for service of pro | Attestation Statements | 2023-02-21 | PDF 41.7 KB |
| 2AEIM_Attestation US Agent | Attestation Statements | 2023-02-21 | PDF 361.2 KB |
| 2AEIM-WL18DBMOD_cvrltr_FCC Class II Permissive Change | Cover Letter(s) | 2023-02-21 | PDF 34.6 KB |
| 2AEIM-WL18DBMOD_cvrltr_FCC Confidentiality Request | Cover Letter(s) | 2023-02-21 | PDF 42.1 KB |
| 2AEIM-WL18DBMOD_cvrltr_FCC POA | Cover Letter(s) | 2023-02-21 | PDF 337.6 KB |
| 2AEIM-WL18DBMOD_cvrltr_Change In FCC ID Request SIGNED(Tesla) | Cover Letter(s) | 2023-01-18 | PDF 409.1 KB |
| 2AEIM-WL18DBMOD_cvrltr_FCC POA - SIGNED(Tesla) | Cover Letter(s) | 2023-01-18 | PDF 337.6 KB |
| FCC Change ID, IC Multiple Listing Authorization | Cover Letter(s) | 2023-01-18 | PDF 2.3 MB |
| Tesla_FCC Authorization to Viraj 20-DEC-2022 | Cover Letter(s) | 2023-01-18 | PDF 311.7 KB |
| Texas Instruments_Naomi Heller DOA from Marian Kost September 2021 | Cover Letter(s) | 2023-01-18 | PDF 222 KB |
| 2AEIM-WL18DBMOD_FCC MPE_r1 | RF Exposure Info | 2023-02-21 | PDF 355.2 KB |
| TunePro Metadata only | Parts List/Tune Up Info | PDF 76.1 KB |
Application Information
| Application ID | mBgXwtDBookNGG+EwurB6w== |
|---|---|
| Final Action Date | 2023-02-21 |
| Application Purpose | Class II permissive change or modification of presently authorized equipment |
| Applicant FRN | 0024474967 |
| Model | WL18DBMOD |
| Frequency Range | 5745-5825 MHz |
| Equipment Class | NII - Unlicensed National Information Infrastructure TX |
| Device Description | WiFi and Bluetooth Module |
| Responsible Party | Sean Lui, International Compliance Engineer, Charging, slui@tesla.com  , 650-681-5000 |
| Agent | Irene Irene Irene, Sporton International Inc., irenechung@sporton.com.tw  , 886-3-327-3456 |
| Technical Contact | Irene Chung, Sporton International Inc., irenechung@sporton.com.tw , 886-3-327-3456 |
| Test Firm | Kevin Lu, Sporton International (USA) Inc, Kevinlu@sporton-usa.com  , 16692729004 |
| TCB Email | Kevinlu@sporton-usa.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 08/21/2023 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Single Modular Approval |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. Class II Permissive Change: Integrates the modular into the TESLA POWERWALL ENERGY STORAGE SYSTEM GRID SUPPORT UTILITY INTERACTIVE & STANDALONE INVERTER, and disables the transmission path from the auxiliary port and Bluetooth function via software. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| mBgXwtDBookNGG+EwurB6w== | 2023-02-21 | Class II permissive change or modification of presently authorized equipment |
| 6ycBATodpAbRcllhSoUfdA== | 2023-02-21 | Class II permissive change or modification of presently authorized equipment |
| eL1LSIPS2SHhKfvX6NOOtw== | 2023-01-18 | Change in identification of presently authorized equipment. Original FCC ID: Z64-WL18DBMOD Grant Date: 12/24/2014 |
| IvtwA1lxNVTS6Gy2yv1PdA== | 2023-01-18 | Change in identification of presently authorized equipment. Original FCC ID: Z64-WL18DBMOD Grant Date: 12/24/2014 |
| CFXjDKRJYAbStNQZjm/n1w== | 2023-01-18 | Change in identification of presently authorized equipment. Original FCC ID: Z64-WL18DBMOD Grant Date: 12/24/2014 |
Equipment Authorization
Grants
TCB Grant - Application mBgXwtDBookNGG+EwurB6w==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Sporton International (USA) Inc. 1175 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 02/21/2023 Application Dated: 02/21/2023 |
| Tesla, Inc |
| 3500 Deer Creek Road |
| Palo Alto, CA 94304 |
| Attention: Sean Lui , International Compliance Engineer, Charging |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AEIM-WL18DBMOD |
| Name of Grantee: | Tesla, Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WiFi and Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.0382 | ||
| CC | 15E | 5190.0 - 5230.0 | 0.0499 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.0244 | ||
| CC ND | 15E | 5270.0 - 5310.0 | 0.0525 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.0614 | ||
| CC ND | 15E | 5500.0 - 5700.0 | 0.0698 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. Class II Permissive Change: Integrates the modular into the TESLA POWERWALL ENERGY STORAGE SYSTEM GRID SUPPORT UTILITY INTERACTIVE & STANDALONE INVERTER, and disables the transmission path from the auxiliary port and Bluetooth function via software. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application mBgXwtDBookNGG+EwurB6w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Tesla, Inc 3500 Deer Creek Road Palo Alto, CA 94304 United States |
Date of Grant: 02/21/2023 Application Dated: 02/21/2023 |
| Attention: Sean Lui , International Compliance Engineer, Charging |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AEIM-WL18DBMOD |
| Name of Grantee: | Tesla, Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WiFi and Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.0382 | ||
| CC | 15E | 5190.0 - 5230.0 | 0.0499 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.0244 | ||
| CC ND | 15E | 5270.0 - 5310.0 | 0.0525 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.0614 | ||
| CC ND | 15E | 5500.0 - 5700.0 | 0.0698 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. Class II Permissive Change: Integrates the modular into the TESLA POWERWALL ENERGY STORAGE SYSTEM GRID SUPPORT UTILITY INTERACTIVE & STANDALONE INVERTER, and disables the transmission path from the auxiliary port and Bluetooth function via software. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Sporton International (USA) Inc. 1175 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 01/18/2023 Application Dated: 01/16/2023 |
| Tesla, Inc |
| 3500 Deer Creek Road |
| Palo Alto, CA 94304 |
| Attention: Sean Lui , International Compliance Engineer, Charging |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AEIM-WL18DBMOD |
| Name of Grantee: | Tesla, Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WiFi and Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.0382 | ||
| CC | 15E | 5190.0 - 5230.0 | 0.0499 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.0244 | ||
| CC ND | 15E | 5270.0 - 5310.0 | 0.0525 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.0614 | ||
| CC ND | 15E | 5500.0 - 5700.0 | 0.0698 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
EAS Grant - Application IvtwA1lxNVTS6Gy2yv1PdA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Tesla, Inc 3500 Deer Creek Road Palo Alto, CA 94304 United States |
Date of Grant: 01/18/2023 Application Dated: 01/16/2023 |
| Attention: Sean Lui , International Compliance Engineer, Charging |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AEIM-WL18DBMOD |
| Name of Grantee: | Tesla, Inc |
| Equipment Class: | Unlicensed National Information Infrastructure TX |
| Notes: | WiFi and Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15E | 5180.0 - 5240.0 | 0.0382 | ||
| CC | 15E | 5190.0 - 5230.0 | 0.0499 | ||
| CC ND | 15E | 5260.0 - 5320.0 | 0.0244 | ||
| CC ND | 15E | 5270.0 - 5310.0 | 0.0525 | ||
| CC | 15E | 5745.0 - 5825.0 | 0.0614 | ||
| CC ND | 15E | 5500.0 - 5700.0 | 0.0698 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| ND: | This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h). |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Sporton International (USA) Inc. 1175 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 01/18/2023 Application Dated: 01/16/2023 |
| Tesla, Inc |
| 3500 Deer Creek Road |
| Palo Alto, CA 94304 |
| Attention: Sean Lui , International Compliance Engineer, Charging |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AEIM-WL18DBMOD |
| Name of Grantee: | Tesla, Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | WiFi and Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0049 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.2432 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application eL1LSIPS2SHhKfvX6NOOtw==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Tesla, Inc 3500 Deer Creek Road Palo Alto, CA 94304 United States |
Date of Grant: 01/18/2023 Application Dated: 01/16/2023 |
| Attention: Sean Lui , International Compliance Engineer, Charging |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AEIM-WL18DBMOD |
| Name of Grantee: | Tesla, Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | WiFi and Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0049 | ||
| CC MO | 15C | 2412.0 - 2462.0 | 0.2432 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: | |||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Sporton International (USA) Inc. 1175 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 01/18/2023 Application Dated: 01/16/2023 |
| Tesla, Inc |
| 3500 Deer Creek Road |
| Palo Alto, CA 94304 |
| Attention: Sean Lui , International Compliance Engineer, Charging |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AEIM-WL18DBMOD |
| Name of Grantee: | Tesla, Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WiFi and Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0146 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
EAS Grant - Application CFXjDKRJYAbStNQZjm/n1w==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Tesla, Inc 3500 Deer Creek Road Palo Alto, CA 94304 United States |
Date of Grant: 01/18/2023 Application Dated: 01/16/2023 |
| Attention: Sean Lui , International Compliance Engineer, Charging |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AEIM-WL18DBMOD |
| Name of Grantee: | Tesla, Inc |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | WiFi and Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC | 15C | 2402.0 - 2480.0 | 0.0146 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
Sporton International (USA) Inc. 1175 Montague Expressway Milpitas, CA 95035 |
Date of Grant: 02/21/2023 Application Dated: 02/21/2023 |
| Tesla, Inc |
| 3500 Deer Creek Road |
| Palo Alto, CA 94304 |
| Attention: Sean Lui , International Compliance Engineer, Charging |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AEIM-WL18DBMOD |
| Name of Grantee: | Tesla, Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | WiFi and Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.2432 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. Class II Permissive Change: Integrates the modular into the TESLA POWERWALL ENERGY STORAGE SYSTEM GRID SUPPORT UTILITY INTERACTIVE & STANDALONE INVERTER, and disables the transmission path from the auxiliary port and Bluetooth function via software. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
EAS Grant - Application 6ycBATodpAbRcllhSoUfdA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Tesla, Inc 3500 Deer Creek Road Palo Alto, CA 94304 United States |
Date of Grant: 02/21/2023 Application Dated: 02/21/2023 |
| Attention: Sean Lui , International Compliance Engineer, Charging |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AEIM-WL18DBMOD |
| Name of Grantee: | Tesla, Inc |
| Equipment Class: | Digital Transmission System |
| Notes: | WiFi and Bluetooth Module |
| Modular Type: | Single Modular |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| CC MO | 15C | 2412.0 - 2462.0 | 0.2432 |
| Single Modular Approval. Power listed is conducted. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. This device is to be used only for mobile and fixed applications. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has a 20 and 40 MHz bandwidth mode. Class II Permissive Change: Integrates the modular into the TESLA POWERWALL ENERGY STORAGE SYSTEM GRID SUPPORT UTILITY INTERACTIVE & STANDALONE INVERTER, and disables the transmission path from the auxiliary port and Bluetooth function via software. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. |
| CC: | This device is certified pursuant to two different Part 15 rules sections. |
| MO: | This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing. |
| Mail To: |