1. FCC ID
  2. 2AEJ4
  3. 2AEJ4R2220708

FCC ID 2AEJ4R2220708

Remote Unit

by Sunwave Communications Co., Ltd

Grantee Code: 2AEJ4   Product Code: R2220708
Latest application date: 2023-08-14

FCC ID Device Details

FCC ID2AEJ4R2220708
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AEJ4
Product CodeR2220708
Applicant BusinessSunwave Communications Co., Ltd 🇨🇳
Related Domains sunwave.com.cn sgs.com
Equipment ClassRemote Unit
Test FirmSGS-CSTC Standards Technical Services Co., Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
758-775 MHzClass II permissive change or modification of presently authorized equipment2023-08-14
758-775 MHzOriginal Equipment2021-04-22

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2023-08-14PDF 2.7 MB
User ManualUsers Manual2021-04-22PDF 2.7 MB
Internal photoInternal Photos2023-08-14PDF 1.9 MB
Internal PhotosInternal Photos2021-04-22PDF 2.1 MB
External photoExternal Photos2023-08-14PDF 691.5 KB
External PhotosExternal Photos2021-04-22PDF 889.9 KB
LabelID Label/Location Info2023-08-14PDF 406.5 KB
LabelID Label/Location Info2021-04-22PDF 365.2 KB
Test setup photoTest Setup Photos2023-08-14PDF 277.3 KB
Test Setup PhotosTest Setup Photos2021-04-22PDF 382.7 KB
Test reportTest Report2023-08-14PDF 703.9 KB
Test ReportTest Report2021-04-22PDF 4.9 MB
test reportTest Report2021-04-22PDF 2.6 MB
Attestation letterAttestation Statements2023-08-14PDF 27.6 KB
FCC_U.S. agent LetterAttestation Statements2023-08-14PDF 79.6 KB
QSF27-14-04_Rev1.0_Applicant_Declaration_LetterAttestation Statements2023-08-14PDF 115.8 KB
FCC Attestation LetterCover Letter(s)2021-04-22PDF 175.4 KB
Auth letterCover Letter(s)2023-08-14PDF 25.4 KB
FCC_Class II Permissive Change RequestCover Letter(s)2023-08-14PDF 23.7 KB
Applicant cover letterCover Letter(s)2021-04-22PDF 390.2 KB
Confidentiality LetterCover Letter(s)2021-04-22PDF 214.7 KB
POACover Letter(s)2021-04-22PDF 205.8 KB
MPERF Exposure Info2023-08-14PDF 263.9 KB
MPE REPORTRF Exposure Info2021-04-22PDF 312.3 KB
MPE ReportRF Exposure Info2021-04-22PDF 356.1 KB
Block Diagram Metadata onlyBlock DiagramPDF 73.6 KB
Schematics Metadata onlySchematicsPDF 1.2 MB
Operational Description Metadata onlyOperational DescriptionPDF 2 MB
BOM List Metadata onlyParts List/Tune Up InfoPDF 82.2 KB
Tune up procedure Metadata onlyParts List/Tune Up InfoPDF 114.4 KB

Application Information

Application ID7SPxagfMPFYrQoXVeZCu+A==
Final Action Date2023-08-14
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0022776777
ModelR2220708
Frequency Range758-775 MHz
Equipment ClassB9B - Part 90 Class B Industrial Booster (non-SMR)
Device DescriptionRemote Unit
Responsible PartyRen Ailin, ailin_ren@sunwave.com.cn , +86-571-86704493
AgentParlam Parlam Parlam, SGS-CSTC Standards Technical Services Co., Ltd., Parlam.zhan@sgs.com , +862161915666
Technical ContactParlam Zhan, SGS-CSTC Standards Technical Services Co., Ltd., Parlam.zhan@sgs.com , +862161915666
Non-Technical ContactParlam Zhan, SGS-CSTC Standards Technical Services Co., Ltd., Parlam.zhan@sgs.com , +862161915666
Test FirmKingsley Zhou, SGS-CSTC Standards Technical Services Co., Ltd., Kingsley.Zhou@sgs.com , 13636390700
TCB EmailUSCTS.TCB@SGS.COM
TCB ScopeB2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95, 97, & 101 (all below 3 GHz)
Short-Term ConfidentialityNo
Long-Term ConfidentialityNo
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsClass B signal booster. In-Building DAS Industrial Booster. Power output listed is ERP. Antenna installed for each remote unit must provide a minimum 160cm separation distance from all persons as described in this filling. The antenna(s) used for the transmitter must be fixed-mounted on output permanent structures with maximum permissive gain of external antenna up to 0.1 dBi. RF exposure compliance is addressed at the time of licensing, as required by the responsible FCC bureau(s), including antenna co-location requirement of 1.1307(b)(3). Class II Permissive Change: This product has changed the product antenna gain to 0.1dBi.

Applications

Application IDDatePurpose
7SPxagfMPFYrQoXVeZCu+A==2023-08-14Class II permissive change or modification of presently authorized equipment
r32F4eKy8dnKtswB1zSCnw==2021-04-22Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRulesGrant Notes
758-775 MHz3.06AmpD1W9PF
851-869 MHz3.29AmpD1W9

Grants

TCB Grant - Application r32F4eKy8dnKtswB1zSCnw==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  SGS North America, Inc.
620 Old Peachtree Road NW Suite 100
Suwanee, GA 30024
 Date of Grant: 04/22/2021

Application Dated: 04/22/2021
Sunwave Communications Co., Ltd
581 Huoju Avenue,Binjiang District
Hangzhou,
China
 
Attention: Ren Ailin

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AEJ4R2220708
Name of Grantee:  Sunwave Communications Co., Ltd
Equipment Class: Part 90 Class B Industrial Booster (non-SMR)
Notes: Remote Unit
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
PF 90 758.0  -  775.0 3.06  Amp D1W
90 851.0  -  869.0 3.29  Amp D1W

Class B signal booster. In-Building DAS Industrial Booster. Power output listed is ERP. This transmitter operates as a remote unit as part of a system along with master unit components as described in this filing, and excluding any other devices connected to the (downlink) output terminal of the master unit. This application covers only the system configuration with master unit connected to a base station in downlink path; operations if any with master unit connected to antenna or amplifier in the downlink require separate equipment authorization. Antenna installed for each remote unit must provide a minimum 160cm separation distance from all persons as described in this filling. The antenna(s) used for the transmitter must be fixed-mounted on output permanent structures with maximum permissive gain of external antenna up to 0 dBi. RF exposure compliance is addressed at the time of licensing, as required by the responsible FCC bureau(s), including antenna co-location requirement of 1.1307(b)(3).

PF: Transmitter approved for Public Safety Broadband

EAS Grant - Application r32F4eKy8dnKtswB1zSCnw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Sunwave Communications Co., Ltd
581 Huoju Avenue,Binjiang District
Hangzhou,
China 		  Date of Grant: 04/22/2021

Application Dated: 04/22/2021
 
Attention: Ren Ailin

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AEJ4R2220708
Name of Grantee:  Sunwave Communications Co., Ltd
Equipment Class: Part 90 Class B Industrial Booster (non-SMR)
Notes: Remote Unit
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
PF 90 758.0  -  775.0 3.06  Amp D1W
90 851.0  -  869.0 3.29  Amp D1W

Class B signal booster. In-Building DAS Industrial Booster. Power output listed is ERP. This transmitter operates as a remote unit as part of a system along with master unit components as described in this filing, and excluding any other devices connected to the (downlink) output terminal of the master unit. This application covers only the system configuration with master unit connected to a base station in downlink path; operations if any with master unit connected to antenna or amplifier in the downlink require separate equipment authorization. Antenna installed for each remote unit must provide a minimum 160cm separation distance from all persons as described in this filling. The antenna(s) used for the transmitter must be fixed-mounted on output permanent structures with maximum permissive gain of external antenna up to 0 dBi. RF exposure compliance is addressed at the time of licensing, as required by the responsible FCC bureau(s), including antenna co-location requirement of 1.1307(b)(3).


PF: Transmitter approved for Public Safety Broadband

TCB Grant - Application 7SPxagfMPFYrQoXVeZCu+A==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  SGS North America, Inc.
620 Old Peachtree Road NW Suite 100
Suwanee, GA 30024
 Date of Grant: 08/14/2023

Application Dated: 08/14/2023
Sunwave Communications Co., Ltd
581 Huoju Avenue,Binjiang District
Hangzhou,
China
 
Attention: Ren Ailin

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AEJ4R2220708
Name of Grantee:  Sunwave Communications Co., Ltd
Equipment Class: Part 90 Class B Industrial Booster (non-SMR)
Notes: Remote Unit
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
PF 90 758.0  -  775.0 3.06  Amp D1W
90 851.0  -  869.0 3.29  Amp D1W

Class B signal booster. In-Building DAS Industrial Booster. Power output listed is ERP. Antenna installed for each remote unit must provide a minimum 160cm separation distance from all persons as described in this filling. The antenna(s) used for the transmitter must be fixed-mounted on output permanent structures with maximum permissive gain of external antenna up to 0.1 dBi. RF exposure compliance is addressed at the time of licensing, as required by the responsible FCC bureau(s), including antenna co-location requirement of 1.1307(b)(3).

PF: Transmitter approved for Public Safety Broadband

Class II Permissive Change: This product has changed the product antenna gain to 0.1dBi.


PF: Transmitter approved for Public Safety Broadband

EAS Grant - Application 7SPxagfMPFYrQoXVeZCu+A==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

Sunwave Communications Co., Ltd
581 Huoju Avenue,Binjiang District
Hangzhou,
China 		  Date of Grant: 08/14/2023

Application Dated: 08/14/2023
 
Attention: Ren Ailin

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AEJ4R2220708
Name of Grantee:  Sunwave Communications Co., Ltd
Equipment Class: Part 90 Class B Industrial Booster (non-SMR)
Notes: Remote Unit
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
PF 90 758.0  -  775.0 3.06  Amp D1W
90 851.0  -  869.0 3.29  Amp D1W

Class B signal booster. In-Building DAS Industrial Booster. Power output listed is ERP. Antenna installed for each remote unit must provide a minimum 160cm separation distance from all persons as described in this filling. The antenna(s) used for the transmitter must be fixed-mounted on output permanent structures with maximum permissive gain of external antenna up to 0.1 dBi. RF exposure compliance is addressed at the time of licensing, as required by the responsible FCC bureau(s), including antenna co-location requirement of 1.1307(b)(3).

PF: Transmitter approved for Public Safety Broadband

Class II Permissive Change: This product has changed the product antenna gain to 0.1dBi.


PF: Transmitter approved for Public Safety Broadband

Mail To: