1. FCC ID
  2. 2AEN3
  3. 2AEN3NITRO5R

FCC ID 2AEN3NITRO5R

Mobile Phone

by MAXWEST INTERNATIONAL LIMITED.

Grantee Code: 2AEN3   Product Code: NITRO5R
Latest application date: 2019-01-02

FCC ID Device Details

FCC ID2AEN3NITRO5R
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AEN3
Product CodeNITRO5R
Applicant BusinessMAXWEST INTERNATIONAL LIMITED. 🇨🇳
Equipment ClassMobile Phone
Test FirmBay Area Compliance Laboratories Corp.(Dongguan)

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2402-2480 MHzOriginal Equipment2019-01-02
2402-2480 MHzOriginal Equipment2019-01-02
824.2-848.8 MHzOriginal Equipment2019-01-02

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2019-01-02PDF 610.8 KB
Internal PhotosInternal Photos2019-01-02PDF 1.1 MB
External PhotosExternal Photos2019-01-02PDF 424 KB
Label and Label LocationID Label/Location Info2019-01-02PDF 1.2 MB
Test Setup PhotosTest Setup Photos2019-01-02PDF 211.6 KB
Test Setup PhotosTest Setup Photos2019-01-02PDF 211.6 KB
SAR Test ReportRF Exposure Info2019-01-02PDF 1 MB
Test ReportTest Report2019-01-02PDF 1.2 MB
Test ReportTest Report2019-01-02PDF 1,015.5 KB
Test ReportTest Report2019-01-02PDF 841.2 KB
Authorization LetterCover Letter(s)2019-01-02PDF 32.8 KB
Confidential LetterCover Letter(s)2019-01-02PDF 37.2 KB
SAR Probe & Dipole Cal CertRF Exposure Info2019-01-02PDF 3.2 MB
SAR Probe & Dipole Cal CertsRF Exposure Info2019-01-02PDF 3.2 MB
SAR Scan PlotsRF Exposure Info2019-01-02PDF 1.6 MB
SAR Setup PhotosRF Exposure Info2019-01-02PDF 1.7 MB
Block Diagram Metadata onlyBlock DiagramPDF 10.8 KB
Schematics Metadata onlySchematicsPDF 1.1 MB
Operational Description Metadata onlyOperational DescriptionPDF 391.9 KB
Part List Metadata onlyParts List/Tune Up InfoPDF 88.2 KB
Tune Up Procedure Metadata onlyParts List/Tune Up InfoPDF 151.1 KB

Application Information

Application IDWUWBti4/Y3VDk3zwMwl/0g==
Final Action Date2019-01-02
Application PurposeOriginal Equipment
Applicant FRN0024557357
ModelNITRO5R
Frequency Range2402-2480 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionMobile Phone
Responsible PartyRita Yu, Rita8488@foxmail.com , 9498007607
Test FirmDavid Zhang, Bay Area Compliance Laboratories Corp.(Dongguan), qa.dg@baclcorp.com , 0086 0769 86858888
TCB Emailbacl.regulatory@baclcorp.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power listed is peak conducted. The antenna(s) used for this transmitter must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. SAR compliance for body-worn accessory operation is based on a separation distance of 10 mm between the unit and the body of the user. Belt clips, holsters and other body-worn accessories may not contain metallic components. End-users must be informed of the body worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, and simultaneous transmission exposure conditions are 0.43 W/kg, 0.26 W/kg, and 1.55 W/kg respectively.

Applications

Application IDDatePurpose
WUWBti4/Y3VDk3zwMwl/0g==2019-01-02Original Equipment
OZRi+ElrB23pEIIyew2+Sw==2019-01-02Original Equipment
JX2EGA6Ubs8oMAqNrEKJgA==2019-01-02Original Equipment

Equipment Authorization

FrequencyOutputToleranceEmissionRules
824.2-848.8 MHz0.7452.5ppm244KGXW22H
826.4-846.6 MHz0.1012.5ppm4M16F9W22H
1712.4-1752.6 MHz0.2452.5ppm4M16F9W27
1850.2-1909.8 MHz0.7242.5ppm248KGXW24E
1852.4-1907.6 MHz0.212.5ppm4M18F9W24E
2402-2480 MHz0.006500015C
2402-2480 MHz0.00115C
2412-2462 MHz0.07215C

Grants

TCB Grant - Application WUWBti4/Y3VDk3zwMwl/0g==

TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratory Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
 Date of Grant: 01/02/2019

Application Dated: 01/02/2019
MAXWEST INTERNATIONAL LIMITED.
No.1,Longgang Road,Buji, Longgang
Shenzhen,
China
 
Attention: Rita Yu

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AEN3NITRO5R
Name of Grantee:  MAXWEST INTERNATIONAL LIMITED.
Equipment Class: Digital Transmission System
Notes: Mobile Phone
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 2402.0  -  2480.0 0.001  
15C 2412.0  -  2462.0 0.072  

Output power listed is peak conducted. The antenna(s) used for this transmitter must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. SAR compliance for body-worn accessory operation is based on a separation distance of 10 mm between the unit and the body of the user. Belt clips, holsters and other body-worn accessories may not contain metallic components. End-users must be informed of the body worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, and simultaneous transmission exposure conditions are 0.43 W/kg, 0.26 W/kg, and 1.55 W/kg respectively.

EAS Grant - Application WUWBti4/Y3VDk3zwMwl/0g==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

MAXWEST INTERNATIONAL LIMITED.
No.1,Longgang Road,Buji, Longgang
Shenzhen,
China 		  Date of Grant: 01/02/2019

Application Dated: 01/02/2019
 
Attention: Rita Yu

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AEN3NITRO5R
Name of Grantee:  MAXWEST INTERNATIONAL LIMITED.
Equipment Class: Digital Transmission System
Notes: Mobile Phone
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 2402.0  -  2480.0 0.001  
15C 2412.0  -  2462.0 0.072  

Output power listed is peak conducted. The antenna(s) used for this transmitter must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. SAR compliance for body-worn accessory operation is based on a separation distance of 10 mm between the unit and the body of the user. Belt clips, holsters and other body-worn accessories may not contain metallic components. End-users must be informed of the body worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, and simultaneous transmission exposure conditions are 0.43 W/kg, 0.26 W/kg, and 1.55 W/kg respectively.



TCB Grant - Application OZRi+ElrB23pEIIyew2+Sw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratory Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
 Date of Grant: 01/02/2019

Application Dated: 01/02/2019
MAXWEST INTERNATIONAL LIMITED.
No.1,Longgang Road,Buji, Longgang
Shenzhen,
China
 
Attention: Rita Yu

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AEN3NITRO5R
Name of Grantee:  MAXWEST INTERNATIONAL LIMITED.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Mobile Phone
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 2402.0  -  2480.0 0.0065  

Output power listed is conducted. The antenna(s) used for this transmitter must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. SAR compliance for body-worn accessory operation is based on a separation distance of 10 mm between the unit and the body of the user. Belt clips, holsters and other body-worn accessories may not contain metallic components. End-users must be informed of the body worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, and simultaneous transmission exposure conditions are 0.05 W/kg, 0.15 W/kg, and 1.44 W/kg respectively.

EAS Grant - Application OZRi+ElrB23pEIIyew2+Sw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

MAXWEST INTERNATIONAL LIMITED.
No.1,Longgang Road,Buji, Longgang
Shenzhen,
China 		  Date of Grant: 01/02/2019

Application Dated: 01/02/2019
 
Attention: Rita Yu

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AEN3NITRO5R
Name of Grantee:  MAXWEST INTERNATIONAL LIMITED.
Equipment Class: Part 15 Spread Spectrum Transmitter
Notes: Mobile Phone
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
15C 2402.0  -  2480.0 0.0065  

Output power listed is conducted. The antenna(s) used for this transmitter must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. SAR compliance for body-worn accessory operation is based on a separation distance of 10 mm between the unit and the body of the user. Belt clips, holsters and other body-worn accessories may not contain metallic components. End-users must be informed of the body worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, and simultaneous transmission exposure conditions are 0.05 W/kg, 0.15 W/kg, and 1.44 W/kg respectively.



TCB Grant - Application JX2EGA6Ubs8oMAqNrEKJgA==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION		 TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Bay Area Compliance Laboratory Corp.
1274 Anvilwood Avenue
Sunnyvale, CA 94089
 Date of Grant: 01/02/2019

Application Dated: 01/02/2019
MAXWEST INTERNATIONAL LIMITED.
No.1,Longgang Road,Buji, Longgang
Shenzhen,
China
 
Attention: Rita Yu

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AEN3NITRO5R
Name of Grantee:  MAXWEST INTERNATIONAL LIMITED.
Equipment Class: PCS Licensed Transmitter held to ear
Notes: Mobile Phone
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
22H 824.2  -  848.8 0.745 2.5  PM 244KGXW
22H 826.4  -  846.6 0.101 2.5  PM 4M16F9W
24E 1850.2  -  1909.8 0.724 2.5  PM 248KGXW
24E 1852.4  -  1907.6 0.21 2.5  PM 4M18F9W
27 1712.4  -  1752.6 0.245 2.5  PM 4M16F9W

Output power listed is ERP for below 1 GHz and EIRP for above 1 GHz. The antenna(s) used for this transmitter must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. SAR compliance for body-worn accessory operation is based on a separation distance of 10 mm between the unit and the body of the user. Belt clips, holsters and other body-worn accessories may not contain metallic components. End-users must be informed of the body worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, product specific (hotspot), and simultaneous transmission exposure conditions are 0.38 W/kg, 1.32 W/kg, 1.55 W/kg, and 1.55 W/kg respectively.

This device contains functions that are not operational in U.S Territories. This filing is only applicable for US operations.


EAS Grant - Application JX2EGA6Ubs8oMAqNrEKJgA==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION		 COPY
Certification

MAXWEST INTERNATIONAL LIMITED.
No.1,Longgang Road,Buji, Longgang
Shenzhen,
China 		  Date of Grant: 01/02/2019

Application Dated: 01/02/2019
 
Attention: Rita Yu

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AEN3NITRO5R
Name of Grantee:  MAXWEST INTERNATIONAL LIMITED.
Equipment Class: PCS Licensed Transmitter held to ear
Notes: Mobile Phone
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ) 		Output
Watts 		Frequency
Tolerance 		Emission
Designator
22H 824.2  -  848.8 0.745 2.5  PM 244KGXW
22H 826.4  -  846.6 0.101 2.5  PM 4M16F9W
24E 1850.2  -  1909.8 0.724 2.5  PM 248KGXW
24E 1852.4  -  1907.6 0.21 2.5  PM 4M18F9W
27 1712.4  -  1752.6 0.245 2.5  PM 4M16F9W

Output power listed is ERP for below 1 GHz and EIRP for above 1 GHz. The antenna(s) used for this transmitter must not be co-located with any other transmitters, except in accordance with FCC multi-transmitter product procedures. SAR compliance for body-worn accessory operation is based on a separation distance of 10 mm between the unit and the body of the user. Belt clips, holsters and other body-worn accessories may not contain metallic components. End-users must be informed of the body worn operating requirements for satisfying RF exposure compliance. The highest reported SAR for head, body-worn accessory, product specific (hotspot), and simultaneous transmission exposure conditions are 0.38 W/kg, 1.32 W/kg, 1.55 W/kg, and 1.55 W/kg respectively.

This device contains functions that are not operational in U.S Territories. This filing is only applicable for US operations.



Mail To: