FCC ID 2AES2-1465
Model 1465 UHF Multi-Carrier In-Building Amplifier
by Applied Micro Design, Inc
Grantee Code: 2AES2 Product Code: 1465
Latest application date: 2015-09-28
FCC ID Device Details
| FCC ID | 2AES2-1465 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2AES2 |
| Product Code | 1465 |
| Applicant Business | Applied Micro Design, Inc 🇺🇸 |
| Related Domains |  appliedmicrodesign.com  wll.com |
| Equipment Class | Model 1465 UHF Multi-Carrier In-Building Amplifier |
| Test Firm | Washington Laboratories, Ltd. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 453.213-453.863 MHz | Original Equipment | 2015-09-28 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| Users Manual Rev 6 | Users Manual | 2015-09-28 | PDF 5.4 MB |
| CBC Combiner | Internal Photos | 2015-09-28 | PDF 2.3 MB |
| CBC Splitter | Internal Photos | 2015-09-28 | PDF 3.1 MB |
| DSP Card | Internal Photos | 2015-09-28 | PDF 2.4 MB |
| HD30433 Inner View | Internal Photos | 2015-09-28 | PDF 67.5 KB |
| HD30434 Inner View | Internal Photos | 2015-09-28 | PDF 68.7 KB |
| PA Dual 400 MHz 3 Input Rev 2 | Internal Photos | 2015-09-28 | PDF 3.3 MB |
| PA Dual 400 MHz 4 Input Rev 2 | Internal Photos | 2015-09-28 | PDF 3.2 MB |
| PA Single 800 MHz Rev 2 | Internal Photos | 2015-09-28 | PDF 2.8 MB |
| CBC Combiner | External Photos | 2015-09-28 | PDF 2.3 MB |
| CBC Splitter | External Photos | 2015-09-28 | PDF 3.1 MB |
| DSP Card | External Photos | 2015-09-28 | PDF 2.4 MB |
| DSP Card Cage Labeled | External Photos | 2015-09-28 | PDF 561.4 KB |
| Equipment Rack Labeled | External Photos | 2015-09-28 | PDF 1.4 MB |
| PA Dual 400 MHz 3 Input | External Photos | 2015-09-28 | PDF 3.3 MB |
| PA Dual 400 MHz 4 Input | External Photos | 2015-09-28 | PDF 3.2 MB |
| PA Single 800 MHz | External Photos | 2015-09-28 | PDF 2.7 MB |
| C1DLA PNL Label | ID Label/Location Info | 2015-09-28 | PDF 45.5 KB |
| Componet Of Labeling | ID Label/Location Info | 2015-09-28 | PDF 25.6 KB |
| DSP Chassis Label | ID Label/Location Info | 2015-09-28 | PDF 73.6 KB |
| FCC ID Label | ID Label/Location Info | 2015-09-28 | PDF 13.8 KB |
| MA01465-0018A Label Location Rev Metadata only | ID Label/Location Info | 2015-09-28 | PDF 217.8 KB |
| MA01465-0019A Label Location Rev Metadata only | ID Label/Location Info | 2015-09-28 | PDF 215.1 KB |
| MA01465-0025A Label Location Rev Metadata only | ID Label/Location Info | 2015-09-28 | PDF 193.5 KB |
| Part 90 Label | ID Label/Location Info | 2015-09-28 | PDF 24.8 KB |
| S6DLA PNL Label | ID Label/Location Info | 2015-09-28 | PDF 61.3 KB |
| S7DLA PNL Label | ID Label/Location Info | 2015-09-28 | PDF 60.3 KB |
| S8DLA PNL Label | ID Label/Location Info | 2015-09-28 | PDF 54.5 KB |
| Amplifier Block | Block Diagram | 2015-09-28 | PDF 127.2 KB |
| EUT Overall Block | Block Diagram | 2015-09-28 | PDF 96.9 KB |
| Test Photos | Test Setup Photos | 2015-09-28 | PDF 419.4 KB |
| Power Level Clarification | Test Report | 2015-09-28 | PDF 77.6 KB |
| Test Report REV 1 Part 1 Metadata only | Test Report | 2015-09-28 | PDF 5.3 MB |
| Test Report REV 1 Part 2 Metadata only | Test Report | 2015-09-28 | PDF 5.4 MB |
| Test Report REV 1 Part 3 Metadata only | Test Report | 2015-09-28 | PDF 5.5 MB |
| Test Report REV 1 Part 4 Metadata only | Test Report | 2015-09-28 | PDF 2.8 MB |
| Test Report REV 2 Part 1 | Test Report | 2015-09-28 | PDF 5.4 MB |
| Test Report REV 2 Part 2 | Test Report | 2015-09-28 | PDF 5.3 MB |
| Test Report REV 2 Part 3 | Test Report | 2015-09-28 | PDF 5.4 MB |
| Test Report REV 2 Part 4 | Test Report | 2015-09-28 | PDF 3.7 MB |
| Attestation KDB 935210 | Attestation Statements | 2015-09-28 | PDF 111.9 KB |
| Agency Letter | Cover Letter(s) | 2015-09-28 | PDF 94.8 KB |
| Confidentiality Letter AMDI Rev | Cover Letter(s) | 2015-09-28 | PDF 97.4 KB |
| FCC Guidace PBA 922162 | Cover Letter(s) | 2015-09-28 | PDF 42.4 KB |
| KDB 594280 Clarification | Cover Letter(s) | 2015-09-28 | PDF 137.7 KB |
| RF Exposure Info Rev 1 | RF Exposure Info | 2015-09-28 | PDF 266 KB |
| CBC Combiner Block Metadata only | Block Diagram | PDF 30.8 KB | |
| CBC Splitter Block Metadata only | Block Diagram | PDF 32.8 KB | |
| DSK Card Block Metadata only | Block Diagram | PDF 22.9 KB | |
| DSP Card Cage Block Metadata only | Block Diagram | PDF 33.6 KB | |
| DSP WTC Block Metadata only | Block Diagram | PDF 22.4 KB | |
| PA Dual 400 MHz 3 Input Block Metadata only | Block Diagram | PDF 102.7 KB | |
| Top Level System Block Metadata only | Block Diagram | PDF 10 KB | |
| EL01465-0008R2 DSP Schematic Metadata only | Schematics | PDF 270.5 KB | |
| EL01465-0012R1 DSP Motherboard Metadata only | Schematics | PDF 48.9 KB | |
| EL01465-0015R1 Power Backplane Metadata only | Schematics | PDF 105.6 KB | |
| EL01465-0016R0 Data Backplane Metadata only | Schematics | PDF 149.3 KB | |
| CBC Combiner Cabling Metadata only | Operational Description | PDF 59.9 KB | |
| CBC Combiner Wiring Metadata only | Operational Description | PDF 59.9 KB | |
| CBC Splitter Wiring Metadata only | Operational Description | PDF 124.1 KB | |
| Head End Description Metadata only | Operational Description | PDF 233.3 KB | |
| Internal Oscillator Metadata only | Operational Description | PDF 83.1 KB | |
| PA Dual 400 MHz 3 Input Wiring Metadata only | Operational Description | PDF 156.4 KB | |
| PA Dual 400 MHz 4 Input Wiring Metadata only | Operational Description | PDF 157.5 KB | |
| SWN Description 2015 0629 Metadata only | Operational Description | PDF 168.2 KB | |
| Theory og Operation Entire System Rev 081115 Metadata only | Operational Description | PDF 760.1 KB | |
| DSP Module Setup and Tuning Metadata only | Parts List/Tune Up Info | PDF 405.3 KB | |
| Item 17 Question on Power Settings Rev 2005 0813 Metadata only | Parts List/Tune Up Info | PDF 138.5 KB | |
| PL01465-0008R2 DSP Card Elec Parts Metadata only | Parts List/Tune Up Info | PDF 69.6 KB | |
| PL01465-0010R1 DSP Card Cage COM Metadata only | Parts List/Tune Up Info | PDF 55.9 KB | |
| PL01465-0012R0 DSP Card BOM Metadata only | Parts List/Tune Up Info | PDF 61.4 KB | |
| PL01465-0018A PA Dual 400 MHz 4 Input BOM Metadata only | Parts List/Tune Up Info | PDF 81.1 KB | |
| PL01465-0019A PA Dual 400 MHz 3 Input BOM Metadata only | Parts List/Tune Up Info | PDF 81 KB | |
| PL01465-0025A PA Single 800 MHz Mech Parts BOM Metadata only | Parts List/Tune Up Info | PDF 84.8 KB | |
| PL01465-0026R1 - CBC Combiner Metadata only | Parts List/Tune Up Info | PDF 59.3 KB | |
| PL01465-0027A CBC Splitter BOM Metadata only | Parts List/Tune Up Info | PDF 78 KB |
Application Information
| Application ID | gPu6KRCSBNqzMiF1w48oxA== |
|---|---|
| Final Action Date | 2015-09-28 |
| Application Purpose | Original Equipment |
| Applicant FRN | 0024600678 |
| Model | 1465 |
| Frequency Range | 453.213-453.863 MHz |
| Equipment Class | B9B - Part 90 Class B Industrial Booster (non-SMR) |
| Device Description | Model 1465 UHF Multi-Carrier In-Building Amplifier |
| Responsible Party | Stanley Mantel, President, smantel@appliedmicrodesign.com , 3015409506 |
| Agent | Steve Steve Steve, Washington Laboratories, Ltd, stevek@wll.com , 301-216-1500 |
| Technical Contact | Steve Koster, Washington Laboratories, Ltd, stevek@wll.com , 301-216-1500 |
| Non-Technical Contact | Steve Koseter, Washington Laboratories, Ltd, stevek@wll.com , 301-216-1500 |
| Test Firm | Steve Koster, Washington Laboratories, Ltd., stevek@wll.com , 301-216-1500 |
| TCB Email | hotline@acbcert.com  |
| TCB Scope | B2: General Mobile Radio And Broadcast Services equipment in the following 47 CFR Parts 22 (non-cellular) 73, 74, 90, 95, 97, & 101 (all below 3 GHz) |
| Short-Term Confidentiality | No |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | No |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | Yes |
| Grant Comments | Power listed is conducted at antenna terminals. This device is a Part 90 Class B Signal Booster. This application covers only the specific system configuration with host/master unit connected to a specific Site-Wide Network (SWN) as defined within this application. The host/master must be connected to the SWN in the uplink path; operations if any with host/master unit connected to antenna or amplifier in the uplink requires separate equipment authorization. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE Limits. This RF transmitter system must be installed and operated as shown in the filing, and labeled with FCC Identifier and other labeling as also shown in this filing. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| gPu6KRCSBNqzMiF1w48oxA== | 2015-09-28 | Original Equipment |
Equipment Authorization
| Frequency | Output | Tolerance | Emission | Rules | Grant Notes |
|---|---|---|---|---|---|
| 453.213-453.863 MHz | 0.097 | Amp | F3E | 9 | 2 |
| 453.65 MHz | 0.1 | Amp | F3E | 9 | 2 |
| 460.488-463.175 MHz | 0.132 | Amp | F3E | 9 | 2 |
| 477.838-478.213 MHz | 0.093 | Amp | F3E | 9 | 2 |
| 482.688-482.713 MHz | 0.097 | Amp | F3E | 9 | 2 |
| 485.063-487.488 MHz | 0.093 | Amp | F3E | 9 | 2 |
| 851.013-853.013 MHz | 0.1 | Amp | F3E | 9 | 2 |
| 851.038-853.038 MHz | 0.1 | Amp | F3E | 9 | 2 |
| 851.075-853.35 MHz | 0.1 | Amp | F3E | 9 | 2 |
| 851.213-853.913 MHz | 0.085 | Amp | F3E | 9 | 2 |
Grants
TCB Grant - Application gPu6KRCSBNqzMiF1w48oxA==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 09/28/2015 Application Dated: 08/21/2015 |
| Applied Micro Design, Inc |
| 19516 Amaranth Drive |
| Germantown, MD 20874 |
| Attention: Stanley Mantel , President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AES2-1465 |
| Name of Grantee: | Applied Micro Design, Inc |
| Equipment Class: | Part 90 Class B Industrial Booster (non-SMR) |
| Notes: | Model 1465 UHF Multi-Carrier In-Building Amplifier |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 | 90 | 483.0125 - 484.7625 | 0.101 | Amp | F3E |
| 20 | 90 | 485.0625 - 487.4875 | 0.093 | Amp | F3E |
| 20 | 90 | 482.6875 - 482.7125 | 0.097 | Amp | F3E |
| 20 | 90 | 460.4875 - 463.175 | 0.132 | Amp | F3E |
| 20 | 90 | 453.2125 - 453.8625 | 0.097 | Amp | F3E |
| 20 | 90 | 851.0125 - 853.0125 | 0.1 | Amp | F3E |
| 20 | 90 | 477.8375 - 478.2125 | 0.093 | Amp | F3E |
| 20 | 90 | 851.0375 - 853.0375 | 0.1 | Amp | F3E |
| 20 | 90 | 453.65 - 453.65 | 0.1 | Amp | F3E |
| 20 | 90 | 851.2125 - 853.9125 | 0.085 | Amp | F3E |
| 20 | 90 | 851.075 - 853.35 | 0.1 | Amp | F3E |
| Power listed is conducted at antenna terminals. This device is a Part 90 Class B Signal Booster. This application covers only the specific system configuration with host/master unit connected to a specific Site-Wide Network (SWN) as defined within this application. The host/master must be connected to the SWN in the uplink path; operations if any with host/master unit connected to antenna or amplifier in the uplink requires separate equipment authorization. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE Limits. This RF transmitter system must be installed and operated as shown in the filing, and labeled with FCC Identifier and other labeling as also shown in this filing. |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
EAS Grant - Application gPu6KRCSBNqzMiF1w48oxA==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Applied Micro Design, Inc 19516 Amaranth Drive Germantown, MD 20874 United States |
Date of Grant: 09/28/2015 Application Dated: 08/21/2015 |
| Attention: Stanley Mantel , President |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AES2-1465 |
| Name of Grantee: | Applied Micro Design, Inc |
| Equipment Class: | Part 90 Class B Industrial Booster (non-SMR) |
| Notes: | Model 1465 UHF Multi-Carrier In-Building Amplifier |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 20 | 90 | 483.0125 - 484.7625 | 0.101 | Amp | F3E |
| 20 | 90 | 485.0625 - 487.4875 | 0.093 | Amp | F3E |
| 20 | 90 | 482.6875 - 482.7125 | 0.097 | Amp | F3E |
| 20 | 90 | 460.4875 - 463.175 | 0.132 | Amp | F3E |
| 20 | 90 | 453.2125 - 453.8625 | 0.097 | Amp | F3E |
| 20 | 90 | 851.0125 - 853.0125 | 0.1 | Amp | F3E |
| 20 | 90 | 477.8375 - 478.2125 | 0.093 | Amp | F3E |
| 20 | 90 | 851.0375 - 853.0375 | 0.1 | Amp | F3E |
| 20 | 90 | 453.65 - 453.65 | 0.1 | Amp | F3E |
| 20 | 90 | 851.2125 - 853.9125 | 0.085 | Amp | F3E |
| 20 | 90 | 851.075 - 853.35 | 0.1 | Amp | F3E |
| Power listed is conducted at antenna terminals. This device is a Part 90 Class B Signal Booster. This application covers only the specific system configuration with host/master unit connected to a specific Site-Wide Network (SWN) as defined within this application. The host/master must be connected to the SWN in the uplink path; operations if any with host/master unit connected to antenna or amplifier in the uplink requires separate equipment authorization. End-users and installers must be provided with transmitter operating conditions for satisfying RF exposure compliance. RF exposure compliance is addressed for 1.1310 and 2.1091 MPE Limits. This RF transmitter system must be installed and operated as shown in the filing, and labeled with FCC Identifier and other labeling as also shown in this filing. |
| 20: | All electrical and mechanical devices employed for spurious radiation suppression, including any modifications made during certification testing, must be incorporated in each unit marketed. |
| Mail To: |