FCC ID 2AET4RUTM50

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

SGS North America, Inc. 620 Old Peachtree Road NW Suite 100 Suwanee, GA 30024

Date of Grant: 09/07/2023 Application Dated: 09/05/2023

UAB Teltonika Networks

K. Barsausko st. 66

Kaunas, LT-51436 Lithuania

Attention: Mantas Cizauskas

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2AET4RUTM50
Name of Grantee:	UAB Teltonika Networks
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	5G Router

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15E	5180.0  -  5240.0	0.0509
CC MO	15E	5190.0  -  5230.0	0.0457
CC MO	15E	5210.0  -  5210.0	0.0461
CC MO ND	15E	5260.0  -  5320.0	0.0526
CC MO ND	15E	5270.0  -  5310.0	0.0522
CC MO ND	15E	5290.0  -  5290.0	0.0484
CC MO ND	15E	5500.0  -  5700.0	0.0458
CC MO ND	15E	5510.0  -  5670.0	0.0478
CC MO ND	15E	5530.0  -  5530.0	0.0443
CC MO ND	15E	5610.0  -  5610.0	0.0364
CC MO	15E	5745.0  -  5825.0	0.0456
CC MO	15E	5755.0  -  5795.0	0.0394
CC MO	15E	5775.0  -  5775.0	0.0358

Power Output listed is conducted. The device is an 802.11a/n/ac/ax client containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This device has 20MHz, 40MHz and 80MHz bandwidth modes.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND:	This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

UAB Teltonika Networks K. Barsausko st. 66 Kaunas, LT-51436 Lithuania

Date of Grant: 09/07/2023 Application Dated: 09/05/2023

Attention: Mantas Cizauskas

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2AET4RUTM50
Name of Grantee:	UAB Teltonika Networks
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	5G Router
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15E	5180.0  -  5240.0	0.0509
CC MO	15E	5190.0  -  5230.0	0.0457
CC MO	15E	5210.0  -  5210.0	0.0461
CC MO ND	15E	5260.0  -  5320.0	0.0526
CC MO ND	15E	5270.0  -  5310.0	0.0522
CC MO ND	15E	5290.0  -  5290.0	0.0484
CC MO ND	15E	5500.0  -  5700.0	0.0458
CC MO ND	15E	5510.0  -  5670.0	0.0478
CC MO ND	15E	5530.0  -  5530.0	0.0443
CC MO ND	15E	5610.0  -  5610.0	0.0364
CC MO	15E	5745.0  -  5825.0	0.0456
CC MO	15E	5755.0  -  5795.0	0.0394
CC MO	15E	5775.0  -  5775.0	0.0358

Power Output listed is conducted. The device is an 802.11a/n/ac/ax client containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This device has 20MHz, 40MHz and 80MHz bandwidth modes.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.
ND:	This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

TCB Grant - Application q3IBxaiBR+iNXfvJIO9bmg==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

SGS North America, Inc. 620 Old Peachtree Road NW Suite 100 Suwanee, GA 30024

Date of Grant: 09/07/2023 Application Dated: 09/05/2023

UAB Teltonika Networks

K. Barsausko st. 66

Kaunas, LT-51436 Lithuania

Attention: Mantas Cizauskas

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2AET4RUTM50
Name of Grantee:	UAB Teltonika Networks
Equipment Class:	Digital Transmission System
Notes:	5G Router

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15C	2412.0  -  2462.0	0.043
CC MO	15C	2422.0  -  2452.0	0.038

Power Output listed is conducted. The device is an 802.11b/g/n master containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This device has 20MHz and 40MHz bandwidth modes.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

UAB Teltonika Networks K. Barsausko st. 66 Kaunas, LT-51436 Lithuania

Date of Grant: 09/07/2023 Application Dated: 09/05/2023

Attention: Mantas Cizauskas

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2AET4RUTM50
Name of Grantee:	UAB Teltonika Networks
Equipment Class:	Digital Transmission System
Notes:	5G Router
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC MO	15C	2412.0  -  2462.0	0.043
CC MO	15C	2422.0  -  2452.0	0.038

Power Output listed is conducted. The device is an 802.11b/g/n master containing a 2 x 2 MIMO configuration, enabled for either 2.4 or 5 GHz band operations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons. Co-location of this module with other transmitters that operate simultaneously are required to be evaluated using the FCC multi-transmitter procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This device has 20MHz and 40MHz bandwidth modes.

CC:	This device is certified pursuant to two different Part 15 rules sections.
MO:	This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: