FCC ID 2AEUPBHARB001

Ring Bridge

by Ring LLC

Grantee Code: 2AEUP   Product Code: BHARB001
Latest application date: 2020-10-22

FCC ID Device Details

FCC ID2AEUPBHARB001
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AEUP
Product CodeBHARB001
Applicant BusinessRing LLC 🇺🇸
Related Domains amazon.com
Equipment ClassRing Bridge
Test FirmDEKRA Testing and Certification (Suzhou) Co., Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
902.2-927.8 MHzClass II permissive change or modification of presently authorized equipment2020-10-22
902.5-927.3 MHzClass II permissive change or modification of presently authorized equipment2019-03-31
902.5-927.3 MHzOriginal Equipment2019-01-21

Exhibits

DocumentTypeAvailableFile
5B01S8_User ManualUsers Manual2019-01-21PDF 537.5 KB
Internal Photographs 0109Internal Photos2019-01-21PDF 1.1 MB
External PhotographsExternal Photos2019-01-21PDF 289.1 KB
5B01S8_Label Location 0104ID Label/Location Info2019-01-21PDF 679.6 KB
Test Setup PhotosTest Setup Photos2020-10-22PDF 122.9 KB
Test Setup Photographs 0329Test Setup Photos2019-03-31PDF 270.6 KB
Test Setup PhotographsTest Setup Photos2019-01-21PDF 270.9 KB
Test Report FCC 1Test Report2020-10-22PDF 4.3 MB
Test Report FCC 2Test Report2020-10-22PDF 1.5 MB
1932200R-RF-FCC-FCC Part15.247_Lora-Ring Bridge-5B01S8-V1.0 0329-2Test Report2019-03-31PDF 570.1 KB
18C2098R-RF-FCC-FCC Part15.247_Lora-Ring Bridge-5B01S8-V1.1 updateTest Report2019-01-21PDF 1.1 MB
18C2098R-RF-FCC-FCC Part15.247_Wifi 2.4G-Ring Bridge-5B01S8-V1.1 0107Test Report2019-01-21PDF 4.4 MB
Agency AuthorizationCover Letter(s)2020-10-22PDF 155.4 KB
Permissive change letterCover Letter(s)2020-10-22PDF 534.7 KB
2AEUPBHARB001_Declaration of authorizationCover Letter(s)2019-03-31PDF 102.7 KB
2AEUPBHARB001_FCC Confidentiality long Term LetterRF Exposure Info2019-03-31PDF 64.2 KB
2AEUPBHARB001_FCC Confidentiality long Term LetterCover Letter(s)2019-03-31PDF 94.6 KB
2AEUPBHARB001 _ACB_CH12,CH13 cover letterCover Letter(s)2019-01-21PDF 164.7 KB
2AEUPBHARB001_Declaration of authorizationCover Letter(s)2019-01-21PDF 70.7 KB
2AEUPBHARB001_FCC Confidentiality long Term LetterCover Letter(s)2019-01-21PDF 104.7 KB
Authorization LetterCover Letter(s)2019-01-21PDF 91.8 KB
RF Exposure_FCCRF Exposure Info2020-10-22PDF 136.5 KB
18C2098R-FCC-RF Exposure-Ring Bridge-5B01S8-V1.0 Metadata onlyRF Exposure Info2019-01-21PDF 60.4 KB
18C2098R-FCC-RF Exposure-Ring Bridge-5B01S8-V1.0 0109RF Exposure Info2019-01-21PDF 60.4 KB
Confidential_5B01S8_Block Diagram 0104 Metadata onlyBlock DiagramPDF 114.8 KB
Confidential_5B01S8_Schematic Diagram Metadata onlySchematicsPDF 868.4 KB
Confidential_5B01S8_Schematic Diagram 0104 Metadata onlySchematicsPDF 406.8 KB
Confidential_5B01S8_Operational description 0104VER2.0 Metadata onlyOperational DescriptionPDF 532 KB
FCC inquiry Tracking Metadata onlyOperational DescriptionPDF 157.8 KB

Application Information

Application ID/mmpmxDaU1Olfdlu5ZWy+A==
Final Action Date2020-10-22
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0024616419
ModelBHARB001
Frequency Range902.2-927.8 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionRing Bridge
Responsible PartySlash Chang, Engineer, Ring, ring-certifications@amazon.com , 8006561918
Technical ContactCarro Hsieh, Ring LLC, carro.hsieh@ring.com
Test FirmJanet Xu, DEKRA Testing and Certification (Suzhou) Co., Ltd., janet.xu@dekra.com , 86 512 6251 50885113
TCB Emailtcb-hotline@tuv.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityNo
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryYes
Grant CommentsPower Output listed is conducted. Power out of the device at the lower channels are reduced for compliance reasons. The device has been certified for mobile use and any co-location must be done through the use of FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The 2.4GHz Wi-Fi supports 20 and 40MHz bandwidth.

Applications

Application IDDatePurpose
/mmpmxDaU1Olfdlu5ZWy+A==2020-10-22Class II permissive change or modification of presently authorized equipment
DAtjTA+Q0eAU/oFER4n53g==2019-03-31Class II permissive change or modification of presently authorized equipment
4rDlbtHzAchqG0eT5E2e3Q==2019-01-21Original Equipment

Equipment Authorization

FrequencyOutputRules
902.2-927.8 MHz0.061115C
902.2-927.8 MHz0.066215C
902.2-927.8 MHz0.061515C
902.3-926.7 MHz0.062515C
902.3-914.9 MHz0.061515C
902.4-927.6 MHz0.063815C
902.5-927.3 MHz0.06715C
902.5-927.5 MHz0.061915C
2412-2462 MHz0.022615C

Grants

TCB Grant - Application DAtjTA+Q0eAU/oFER4n53g==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 03/31/2019

Application Dated: 03/29/2019
Ring LLC
1523 26th Street
Santa Monica, CA 90404
 
Attention: Slash Chang , Engineer, Ring

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AEUPBHARB001
Name of Grantee:  Ring LLC
Equipment Class: Digital Transmission System
Notes: Ring Bridge
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.0226  
15C 902.5  -  927.3 0.067  

C2PC to reduce LoRa de-sense issue.

Power Output listed is conducted. Power out of the device at the lower channels are reduced for compliance reasons. The device has been certified for mobile use and any colocation must be done through the use of FCC multi-transmitter product procedures. Endusers and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has 20 MHz and 40 MHz bandwidth modes.


EAS Grant - Application DAtjTA+Q0eAU/oFER4n53g==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Ring LLC
1523 26th Street
Santa Monica, CA 90404
United States
  Date of Grant: 03/31/2019

Application Dated: 03/29/2019
 
Attention: Slash Chang , Engineer, Ring

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AEUPBHARB001
Name of Grantee:  Ring LLC
Equipment Class: Digital Transmission System
Notes: Ring Bridge
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.0226  
15C 902.5  -  927.3 0.067  

C2PC to reduce LoRa de-sense issue.

Power Output listed is conducted. Power out of the device at the lower channels are reduced for compliance reasons. The device has been certified for mobile use and any colocation must be done through the use of FCC multi-transmitter product procedures. Endusers and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has 20 MHz and 40 MHz bandwidth modes.



TCB Grant - Application 4rDlbtHzAchqG0eT5E2e3Q==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  ACB, Inc.
6731 Whittier Avenue Suite C110
McLean, VA 22101
Date of Grant: 01/21/2019

Application Dated: 01/20/2019
Ring LLC
1523 26th Street
Santa Monica, CA 90404
 
Attention: Slash Chang , Engineer, Ring

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AEUPBHARB001
Name of Grantee:  Ring LLC
Equipment Class: Digital Transmission System
Notes: Ring Bridge
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.0226  
15C 902.5  -  927.3 0.067  

Power Output listed is conducted. Power out of the device at the lower channels are reduced for compliance reasons. The device has been certified for mobile use and any co-location must be done through the use of FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has 20 MHz and 40 MHz bandwidth modes.


EAS Grant - Application 4rDlbtHzAchqG0eT5E2e3Q==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Ring LLC
1523 26th Street
Santa Monica, CA 90404
United States
  Date of Grant: 01/21/2019

Application Dated: 01/20/2019
 
Attention: Slash Chang , Engineer, Ring

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AEUPBHARB001
Name of Grantee:  Ring LLC
Equipment Class: Digital Transmission System
Notes: Ring Bridge
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2412.0  -  2462.0 0.0226  
15C 902.5  -  927.3 0.067  

Power Output listed is conducted. Power out of the device at the lower channels are reduced for compliance reasons. The device has been certified for mobile use and any co-location must be done through the use of FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

This device has 20 MHz and 40 MHz bandwidth modes.



TCB Grant - Application /mmpmxDaU1Olfdlu5ZWy+A==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  TUV Rheinland of North America, Inc.
1279 Quarry Lane Suite A
Pleasanton, CA 94566
Date of Grant: 10/22/2020

Application Dated: 10/20/2020
Ring LLC
1523 26th Street
Santa Monica, CA 90404
 
Attention: Slash Chang , Engineer, Ring

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AEUPBHARB001
Name of Grantee:  Ring LLC
Equipment Class: Digital Transmission System
Notes: Ring Bridge
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.3  -  926.7 0.0625  
15C 902.2  -  927.8 0.0611  
15C 902.3  -  914.9 0.0615  
15C 902.2  -  927.8 0.0662  
15C 902.2  -  927.8 0.0615  
15C 902.4  -  927.6 0.0638  
15C 902.5  -  927.5 0.0619  
15C 2412.0  -  2462.0 0.0226  
15C 902.5  -  927.3 0.067  

Power Output listed is conducted. Power out of the device at the lower channels are reduced for compliance reasons. The device has been certified for mobile use and any co-location must be done through the use of FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The 2.4GHz Wi-Fi supports 20 and 40MHz bandwidth.

EAS Grant - Application /mmpmxDaU1Olfdlu5ZWy+A==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Ring LLC
1523 26th Street
Santa Monica, CA 90404
United States
  Date of Grant: 10/22/2020

Application Dated: 10/20/2020
 
Attention: Slash Chang , Engineer, Ring

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AEUPBHARB001
Name of Grantee:  Ring LLC
Equipment Class: Digital Transmission System
Notes: Ring Bridge
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 902.3  -  926.7 0.0625  
15C 902.2  -  927.8 0.0611  
15C 902.3  -  914.9 0.0615  
15C 902.2  -  927.8 0.0662  
15C 902.2  -  927.8 0.0615  
15C 902.4  -  927.6 0.0638  
15C 902.5  -  927.5 0.0619  
15C 2412.0  -  2462.0 0.0226  
15C 902.5  -  927.3 0.067  

Power Output listed is conducted. Power out of the device at the lower channels are reduced for compliance reasons. The device has been certified for mobile use and any co-location must be done through the use of FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. The 2.4GHz Wi-Fi supports 20 and 40MHz bandwidth.



Mail To: