FCC ID 2AEUPBHASB001

Spotlight

by Ring LLC

Grantee Code: 2AEUP   Product Code: BHASB001
Latest application date: 2025-06-16

FCC ID Device Details

FCC ID2AEUPBHASB001
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AEUP
Product CodeBHASB001
Applicant BusinessRing LLC 🇺🇸
Related Domains amazon.com
Equipment ClassSpotlight
Test FirmSGS Taiwan Ltd. Central RF Lab

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
902.2-927.8 MHzClass II permissive change or modification of presently authorized equipment2025-06-16
902.2-927.8 MHzClass II permissive change or modification of presently authorized equipment2020-10-11
902.5-927 MHzClass II permissive change or modification of presently authorized equipment2019-04-10
902.5-927 MHzOriginal Equipment2019-01-01

Exhibits

DocumentTypeAvailableFile
5B11S8_User Manual_REV1Users Manual2019-01-01PDF 4.6 MB
C30_User-Manual_REV1 Metadata onlyUsers Manual2019-01-01PDF 5.1 MB
Internal PhotosInternal Photos2025-06-16PDF 1 MB
5B11S8_Int photoInternal Photos2019-04-10PDF 923.1 KB
5B11S8_Int photo_rev1Internal Photos2019-01-01PDF 643.4 KB
C30_EUT-Int-photoInternal Photos2019-01-01PDF 746.8 KB
External PhotosExternal Photos2025-06-16PDF 576.1 KB
5B11S8_Ext photoExternal Photos2019-04-10PDF 398 KB
C30_EUT-Ext-photoExternal Photos2019-01-01PDF 466.3 KB
5B11S8-lables locationID Label/Location Info2019-04-10PDF 1.1 MB
5B11S8_lables location_REV1ID Label/Location Info2019-01-01PDF 1.1 MB
C30_Label-Location_REV1 Metadata onlyID Label/Location Info2019-01-01PDF 1.4 MB
TSUPTest Setup Photos2025-12-13PDF 382.5 KB
Test Setup PhotosTest Setup Photos2020-10-11PDF 983.1 KB
Test data_Appendix BTest Setup Photos2020-10-11PDF 3.9 MB
5B11S8_Test setup photoTest Setup Photos2019-04-10PDF 481.6 KB
C30_Test-setup-photoTest Setup Photos2019-01-01PDF 564.5 KB
Test ReportTest Report2025-06-16PDF 1.4 MB
Test Report MainTest Report2020-10-11PDF 1.1 MB
Test data_Appendix C 1 of 2Test Report2020-10-11PDF 4.8 MB
Test data_Appendix C 2 of 2Test Report2020-10-11PDF 4.3 MB
Test data_Appendix D RSE 1 of 2Test Report2020-10-11PDF 3.4 MB
Test data_Appendix D RSE 2 of 2Test Report2020-10-11PDF 3.2 MB
Test data_Appendix E 15BTest Report2020-10-11PDF 1.1 MB
5B11S8_Report_BLETest Report2019-04-10PDF 1.5 MB
5B11S8_Report_Lora 500KHz DTSTest Report2019-04-10PDF 1.2 MB
5B11S8_Report_BLE_REV5Test Report2019-01-01PDF 2.2 MB
5B11S8_Report_Lora 500KHz DTS_REV5Test Report2019-01-01PDF 1.8 MB
C30_Report_BLE_REV2 Metadata onlyTest Report2019-01-01PDF 2.2 MB
C30_Report_BLE_REV4 Metadata onlyTest Report2019-01-01PDF 2.2 MB
C30_Report_Lora-500KHz-DTS_REV1 Metadata onlyTest Report2019-01-01PDF 1.8 MB
C30_Report_Lora-500KHz-DTS_REV3 Metadata onlyTest Report2019-01-01PDF 1.8 MB
Attestation Statements Part 2.911(d)(7)Attestation Statements2025-06-16PDF 520.3 KB
Attstn Stmt part 2.911(d)(5)(i)&(ii)Attestation Statements2025-06-16PDF 520.3 KB
Authorization LetterCover Letter(s)2025-06-16PDF 397.7 KB
C2PC LetterCover Letter(s)2025-06-16PDF 112.9 KB
Confidentiality LetterCover Letter(s)2025-06-16PDF 183.4 KB
Agency AuthorizationCover Letter(s)2020-10-11PDF 155.4 KB
Permissive change letterCover Letter(s)2020-10-11PDF 533.6 KB
5B11S8_Discrepancy declaration letterCover Letter(s)2019-04-10PDF 15.5 KB
5B11S8_POACover Letter(s)2019-04-10PDF 182.4 KB
5B11S8_Permanent Letter for ConfidentialityCover Letter(s)2019-04-10PDF 16.6 KB
5B11S8_Confidential letter_REV1Cover Letter(s)2019-01-01PDF 442.4 KB
5B11S8_POA_REV1Cover Letter(s)2019-01-01PDF 370.7 KB
C30_Confidential-letter Metadata onlyCover Letter(s)2019-01-01PDF 33.7 KB
C30_POA Metadata onlyCover Letter(s)2019-01-01PDF 26 KB
RF ExposureRF Exposure Info2025-06-16PDF 240.8 KB
5B11S8_RF Exposure EvaluationRF Exposure Info2019-04-10PDF 683 KB
C30_RF-Exposure-report Metadata onlyRF Exposure Info2019-01-01PDF 92.8 KB
RF Exposure Evaluation_5B11S8_REV3RF Exposure Info2019-01-01PDF 349.1 KB
RF Exposure Evaluation_C30_REV2 Metadata onlyRF Exposure Info2019-01-01PDF 349 KB
5B11S8_Block Diagram Metadata onlyBlock DiagramPDF 34.4 KB
C30_Block-Diagram Metadata onlyBlock DiagramPDF 34.4 KB
5B11S8_Schematics Metadata onlySchematicsPDF 711.6 KB
C30_Schematics Metadata onlySchematicsPDF 84.2 KB
5B11S8_Circuit description Metadata onlyOperational DescriptionPDF 156.7 KB
5B11S8_Circuit description_REV3 Metadata onlyOperational DescriptionPDF 156.7 KB
C30_CircuitDescription_REV2 Metadata onlyOperational DescriptionPDF 138 KB
FCC inquiry Tracking Metadata onlyOperational DescriptionPDF 157.8 KB
Operational Description Metadata onlyOperational DescriptionPDF 63.9 KB

Application Information

Application IDbw/KYlWk3+WIZzHLl47oXg==
Final Action Date2025-06-16
Application PurposeClass II permissive change or modification of presently authorized equipment
Applicant FRN0024616419
ModelBHASB001
Frequency Range902.2-927.8 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionSpotlight
Responsible PartyJason Mitura, Director, ring-certifications@amazon.com , 8006561918
Test FirmRyan WANG, SGS Taiwan Ltd. Central RF Lab, ryan-ec.wang@sgs.com , 886222993279
TCB Emailtei@timcoengr.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date12/13/2025
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceNo
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsPower Output listed is conducted. This device must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. Class II Permissive Change: Enables FSK 100 kbps mode in the 900 MHz ISM band via a software change.

Applications

Application IDDatePurpose
bw/KYlWk3+WIZzHLl47oXg==2025-06-16Class II permissive change or modification of presently authorized equipment
5mGTBqdai9764gFkA7342A==2020-10-11Class II permissive change or modification of presently authorized equipment
6tGk7wibCsRRc7ZvxnzbLg==2019-04-10Class II permissive change or modification of presently authorized equipment
e7tqb/JIE4pW7H1+BStQ1A==2019-01-01Original Equipment

Equipment Authorization

FrequencyOutputRules
902.2-927.8 MHz0.027215C
902.2-927.8 MHz0.0272
902.2-927.8 MHz0.027915C
902.2-927.8 MHz0.0279
902.4-927.6 MHz0.028715C
902.4-927.6 MHz0.0287
902.5-926.5 MHz0.029915C
902.5-927 MHz0.0311315C
902.5-927 MHz0.0315215C
902.5-926.5 MHz0.0299
902.5-927.5 MHz0.029215C
902.5-927.5 MHz0.0292
902.5-927 MHz0.03152
902.9-926.9 MHz0.029
2402-2480 MHz0.000115C
2402-2480 MHz0.00013815C
2402-2480 MHz0.00013515C
2402-2480 MHz0.0001

Grants

TCB Grant - Application e7tqb/JIE4pW7H1+BStQ1A==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 01/01/2019

Application Dated: 12/25/2018
Ring LLC
1523 26th Street
Santa Monica, CA 90404
 
Attention: Slash Chang , Engineer, Ring

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AEUPBHASB001
Name of Grantee:  Ring LLC
Equipment Class: Digital Transmission System
Notes: Spotlight
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.000135  
15C 902.5  -  927.0 0.03152  

Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application e7tqb/JIE4pW7H1+BStQ1A==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Ring LLC
1523 26th Street
Santa Monica, CA 90404
United States
  Date of Grant: 01/01/2019

Application Dated: 12/25/2018
 
Attention: Slash Chang , Engineer, Ring

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AEUPBHASB001
Name of Grantee:  Ring LLC
Equipment Class: Digital Transmission System
Notes: Spotlight
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.000135  
15C 902.5  -  927.0 0.03152  

Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



TCB Grant - Application bw/KYlWk3+WIZzHLl47oXg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  IIA Lab Services, LLC
13146 NW 86th Drive Suite 400
Alachua, FL 32615
Date of Grant: 06/16/2025

Application Dated: 06/16/2025
Ring LLC
12515 Cerise Ave
Hawthorne, CA 90250
 
Attention: Jason Mitura , Director

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AEUPBHASB001
Name of Grantee:  Ring LLC
Equipment Class: Digital Transmission System
Notes: Spotlight
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.0001  
15C 902.5  -  926.5 0.0299  
15C 902.2  -  927.8 0.0272  
15C 902.2  -  927.8 0.0279  
15C 902.4  -  927.6 0.0287  
15C 902.5  -  927.5 0.0292  
15C 902.5  -  927.0 0.03152  
15C 902.9  -  926.9 0.029  

Power Output listed is conducted. This device must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

Class II Permissive Change: Enables FSK 100 kbps mode in the 900 MHz ISM band via a software change.


TCB Grant - Application 6tGk7wibCsRRc7ZvxnzbLg==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  Timco Engineering, Inc.
849 NW State Road 45
Newberry, FL 32669
Date of Grant: 04/10/2019

Application Dated: 04/10/2019
Ring LLC
1523 26th Street
Santa Monica, CA 90404
 
Attention: Slash Chang , Engineer, Ring

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AEUPBHASB001
Name of Grantee:  Ring LLC
Equipment Class: Digital Transmission System
Notes: Spotlight
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.000138  
15C 902.5  -  927.0 0.03113  

Class II Permissive Change, minor changes to the enclosures for non transmitter portions.

Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.


EAS Grant - Application 6tGk7wibCsRRc7ZvxnzbLg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Ring LLC
1523 26th Street
Santa Monica, CA 90404
United States
  Date of Grant: 04/10/2019

Application Dated: 04/10/2019
 
Attention: Slash Chang , Engineer, Ring

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AEUPBHASB001
Name of Grantee:  Ring LLC
Equipment Class: Digital Transmission System
Notes: Spotlight
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.000138  
15C 902.5  -  927.0 0.03113  

Class II Permissive Change, minor changes to the enclosures for non transmitter portions.

Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



TCB Grant - Application 5mGTBqdai9764gFkA7342A==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  TUV Rheinland of North America, Inc.
1279 Quarry Lane Suite A
Pleasanton, CA 94566
Date of Grant: 10/11/2020

Application Dated: 10/09/2020
Ring LLC
1523 26th Street
Santa Monica, CA 90404
 
Attention: Slash Chang , Engineer, Ring

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AEUPBHASB001
Name of Grantee:  Ring LLC
Equipment Class: Digital Transmission System
Notes: Spotlight
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.0001  
15C 902.5  -  926.5 0.0299  
15C 902.2  -  927.8 0.0272  
15C 902.2  -  927.8 0.0279  
15C 902.4  -  927.6 0.0287  
15C 902.5  -  927.5 0.0292  
15C 902.5  -  927.0 0.03152  

Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.

EAS Grant - Application 5mGTBqdai9764gFkA7342A==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Ring LLC
1523 26th Street
Santa Monica, CA 90404
United States
  Date of Grant: 10/11/2020

Application Dated: 10/09/2020
 
Attention: Slash Chang , Engineer, Ring

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AEUPBHASB001
Name of Grantee:  Ring LLC
Equipment Class: Digital Transmission System
Notes: Spotlight
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
15C 2402.0  -  2480.0 0.0001  
15C 902.5  -  926.5 0.0299  
15C 902.2  -  927.8 0.0272  
15C 902.2  -  927.8 0.0279  
15C 902.4  -  927.6 0.0287  
15C 902.5  -  927.5 0.0292  
15C 902.5  -  927.0 0.03152  

Power Output listed is conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and not be co-located with any other transmitters except in accordance with FCC multi-transmitter product procedures. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance.



Mail To: