FCC ID 2AEUPRBBR002
Ring Bridge
by Ring LLC
Grantee Code: 2AEUP Product Code: RBBR002
Latest application date: 2021-03-10
FCC ID Device Details
| FCC ID | 2AEUPRBBR002 |
|---|---|
| Mirrors | fcc.id | gov | fccid.ai |
| Grantee Code | 2AEUP |
| Product Code | RBBR002 |
| Applicant Business | Ring LLC 🇺🇸 |
| Related Domains | |
| Equipment Class | Ring Bridge |
| Test Firm | DEKRA Testing and Certification (Suzhou) Co., Ltd. |
Operating Frequencies
| Frequency Range | Application Purpose | Final Action Date |
|---|---|---|
| 902.5-926.5 MHz | Change in identification of presently authorized equipment. Original FCC ID: 2AEUPRBBR003 Grant Date: 09/03/2020 | 2021-03-10 |
| 902.2-927.8 MHz | Change in identification of presently authorized equipment. Original FCC ID: 2AEUPRBBR003 Grant Date: 09/03/2020 | 2021-03-10 |
Exhibits
| Document | Type | Available | File |
|---|---|---|---|
| TempConfidential_Ring Bridge Batch External Photo | External Photos | 2021-09-05 | PDF 4 MB |
| Ring Bridge Batch Product Label-rev2 | ID Label/Location Info | 2021-03-10 | PDF 183 KB |
| 2AEUPRBBR002 STC Letter-rev3 | Cover Letter(s) | 2021-03-10 | PDF 153.5 KB |
| Ring Bridge Batch Cover Letter-CH signed 8Mar21 | Cover Letter(s) | 2021-03-10 | PDF 113.6 KB |
Application Information
| Application ID | zAQuonrndgUMOaPU1zN4/Q== |
|---|---|
| Final Action Date | 2021-03-10 |
| Application Purpose | Change in identification of presently authorized equipment. Original FCC ID: 2AEUPRBBR003 Grant Date: 09/03/2020 |
| Applicant FRN | 0024616419 |
| Model | RBBR002 |
| Frequency Range | 902.5-926.5 MHz |
| Equipment Class | DTS - Digital Transmission System |
| Device Description | Ring Bridge |
| Responsible Party | Slash Chang, Engineer, Ring, ring-certifications@amazon.com |
| Technical Contact | Carro Hsieh, Ring, LLC, carro.hsieh@ring.com |
| Test Firm | Janet Xu, DEKRA Testing and Certification (Suzhou) Co., Ltd., janet.xu@dekra.com |
| TCB Email | hotline@acbcert.com |
| TCB Scope | A4: UNII devices & low power transmitters using spread spectrum techniques |
| Short-Term Confidentiality | Yes |
| Short-Term Confidentiality Date | 09/05/2021 |
| Long-Term Confidentiality | Yes |
| Grant Deferral | No |
| Modular Equipment | Does not apply |
| Composite Device | Yes |
| Composite Part | No |
| Cognitive Radio | No |
| Authorization Waiver | No |
| Authorization Waiver Approved | No |
| Section 5301 Certification | Yes |
| Related OET Knowledge DataBase Inquiry | No |
| Grant Comments | Power Output is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End users must be provided with specific operating instructions for satisfying RF exposure compliance. This device has 20/40 MHz bandwidth mode. |
Applications
| Application ID | Date | Purpose |
|---|---|---|
| zAQuonrndgUMOaPU1zN4/Q== | 2021-03-10 | Change in identification of presently authorized equipment. Original FCC ID: 2AEUPRBBR003 Grant Date: 09/03/2020 |
| tWjSLZrE4kbg45pIxWJTSQ== | 2021-03-10 | Change in identification of presently authorized equipment. Original FCC ID: 2AEUPRBBR003 Grant Date: 09/03/2020 |
Equipment Authorization
Grants
TCB Grant - Application zAQuonrndgUMOaPU1zN4/Q==
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 03/10/2021 Application Dated: 03/09/2021 |
| Ring LLC |
| 1523 26th Street |
| Santa Monica, CA 90404 |
| Attention: Slash Chang , Engineer, Ring |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AEUPRBBR002 |
| Name of Grantee: | Ring LLC |
| Equipment Class: | Digital Transmission System |
| Notes: | Ring Bridge |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.097 | |||
| 15C | 902.5 - 926.5 | 0.1 |
| Power Output is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End users must be provided with specific operating instructions for satisfying RF exposure compliance. This device has 20/40 MHz bandwidth mode. |
EAS Grant - Application zAQuonrndgUMOaPU1zN4/Q==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Ring LLC 1523 26th Street Santa Monica, CA 90404 United States |
Date of Grant: 03/10/2021 Application Dated: 03/09/2021 |
| Attention: Slash Chang , Engineer, Ring |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AEUPRBBR002 |
| Name of Grantee: | Ring LLC |
| Equipment Class: | Digital Transmission System |
| Notes: | Ring Bridge |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 2412.0 - 2462.0 | 0.097 | |||
| 15C | 902.5 - 926.5 | 0.1 |
| Power Output is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End users must be provided with specific operating instructions for satisfying RF exposure compliance. This device has 20/40 MHz bandwidth mode. |
| Mail To: | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| TCB | GRANT OF EQUIPMENT AUTHORIZATION |
TCB |
| Certification | ||
| Issued Under the Authority of the | ||
| Federal Communications Commission | ||
| By: |
|
ACB, Inc. 6731 Whittier Avenue Suite C110 McLean, VA 22101 |
Date of Grant: 03/10/2021 Application Dated: 03/09/2021 |
| Ring LLC |
| 1523 26th Street |
| Santa Monica, CA 90404 |
| Attention: Slash Chang , Engineer, Ring |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AEUPRBBR002 |
| Name of Grantee: | Ring LLC |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Ring Bridge |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.2 - 927.8 | 0.13 |
| Power Output is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End users must be provided with specific operating instructions for satisfying RF exposure compliance. |
EAS Grant - Application tWjSLZrE4kbg45pIxWJTSQ==
| COPY |
FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION |
COPY |
| Certification |
|
Ring LLC 1523 26th Street Santa Monica, CA 90404 United States |
Date of Grant: 03/10/2021 Application Dated: 03/09/2021 |
| Attention: Slash Chang , Engineer, Ring |
| NOT TRANSFERABLE |
| EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below. |
| FCC IDENTIFIER: | 2AEUPRBBR002 |
| Name of Grantee: | Ring LLC |
| Equipment Class: | Part 15 Spread Spectrum Transmitter |
| Notes: | Ring Bridge |
| Modular Type: | Does not apply |
| Grant Notes | FCC Rule Parts | Frequency Range (MHZ) | Output Watts | Frequency Tolerance | Emission Designator |
| 15C | 902.2 - 927.8 | 0.13 |
| Power Output is conducted. The antenna(s) used for this transmitter must be used to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter. End users must be provided with specific operating instructions for satisfying RF exposure compliance. |
| Mail To: |