CM00056 Switch Up Test Report SZEM180800755201 Collective Minds Gaming

Collective Minds Gaming Switch Up

Page 1 of CM00056 Switch Up Test Report SZEM180800755201 Collective Minds Gaming
Page 2 of CM00056 Switch Up Test Report SZEM180800755201 Collective Minds Gaming
Page 3 of CM00056 Switch Up Test Report SZEM180800755201 Collective Minds Gaming
Page 4 of CM00056 Switch Up Test Report SZEM180800755201 Collective Minds Gaming
Page 5 of CM00056 Switch Up Test Report SZEM180800755201 Collective Minds Gaming
Page 6 of CM00056 Switch Up Test Report SZEM180800755201 Collective Minds Gaming
Page 7 of CM00056 Switch Up Test Report SZEM180800755201 Collective Minds Gaming
Page 8 of CM00056 Switch Up Test Report SZEM180800755201 Collective Minds Gaming
Page 9 of CM00056 Switch Up Test Report SZEM180800755201 Collective Minds Gaming
Page 10 of CM00056 Switch Up Test Report SZEM180800755201 Collective Minds Gaming
Page 11 of CM00056 Switch Up Test Report SZEM180800755201 Collective Minds Gaming
Page 12 of CM00056 Switch Up Test Report SZEM180800755201 Collective Minds Gaming
Page 13 of CM00056 Switch Up Test Report SZEM180800755201 Collective Minds Gaming
Page 14 of CM00056 Switch Up Test Report SZEM180800755201 Collective Minds Gaming
Page 15 of CM00056 Switch Up Test Report SZEM180800755201 Collective Minds Gaming
Page 16 of CM00056 Switch Up Test Report SZEM180800755201 Collective Minds Gaming
Page 17 of CM00056 Switch Up Test Report SZEM180800755201 Collective Minds Gaming
Page 18 of CM00056 Switch Up Test Report SZEM180800755201 Collective Minds Gaming
Page 19 of CM00056 Switch Up Test Report SZEM180800755201 Collective Minds Gaming
Page 20 of CM00056 Switch Up Test Report SZEM180800755201 Collective Minds Gaming
Page 21 of CM00056 Switch Up Test Report SZEM180800755201 Collective Minds Gaming
Page 22 of CM00056 Switch Up Test Report SZEM180800755201 Collective Minds Gaming
Page 23 of CM00056 Switch Up Test Report SZEM180800755201 Collective Minds Gaming
Page 24 of CM00056 Switch Up Test Report SZEM180800755201 Collective Minds Gaming
Page 25 of CM00056 Switch Up Test Report SZEM180800755201 Collective Minds Gaming
Page 26 of CM00056 Switch Up Test Report SZEM180800755201 Collective Minds Gaming
Page 27 of CM00056 Switch Up Test Report SZEM180800755201 Collective Minds Gaming
Page 28 of CM00056 Switch Up Test Report SZEM180800755201 Collective Minds Gaming
Page 29 of CM00056 Switch Up Test Report SZEM180800755201 Collective Minds Gaming
Page 30 of CM00056 Switch Up Test Report SZEM180800755201 Collective Minds Gaming
Page 31 of CM00056 Switch Up Test Report SZEM180800755201 Collective Minds Gaming
Page 32 of CM00056 Switch Up Test Report SZEM180800755201 Collective Minds Gaming
Page 33 of CM00056 Switch Up Test Report SZEM180800755201 Collective Minds Gaming
Page 34 of CM00056 Switch Up Test Report SZEM180800755201 Collective Minds Gaming
Page 35 of CM00056 Switch Up Test Report SZEM180800755201 Collective Minds Gaming
Page 36 of CM00056 Switch Up Test Report SZEM180800755201 Collective Minds Gaming
Page 37 of CM00056 Switch Up Test Report SZEM180800755201 Collective Minds Gaming
Page 38 of CM00056 Switch Up Test Report SZEM180800755201 Collective Minds Gaming
Page 39 of CM00056 Switch Up Test Report SZEM180800755201 Collective Minds Gaming
Page 40 of CM00056 Switch Up Test Report SZEM180800755201 Collective Minds Gaming
Page 41 of CM00056 Switch Up Test Report SZEM180800755201 Collective Minds Gaming
Page 42 of CM00056 Switch Up Test Report SZEM180800755201 Collective Minds Gaming
Page 43 of CM00056 Switch Up Test Report SZEM180800755201 Collective Minds Gaming
Page 44 of CM00056 Switch Up Test Report SZEM180800755201 Collective Minds Gaming
Page 45 of CM00056 Switch Up Test Report SZEM180800755201 Collective Minds Gaming
Page 46 of CM00056 Switch Up Test Report SZEM180800755201 Collective Minds Gaming
Page 47 of CM00056 Switch Up Test Report SZEM180800755201 Collective Minds Gaming
Page 48 of CM00056 Switch Up Test Report SZEM180800755201 Collective Minds Gaming
Page 49 of CM00056 Switch Up Test Report SZEM180800755201 Collective Minds Gaming
Page 50 of CM00056 Switch Up Test Report SZEM180800755201 Collective Minds Gaming
Page 51 of CM00056 Switch Up Test Report SZEM180800755201 Collective Minds Gaming
Page 52 of CM00056 Switch Up Test Report SZEM180800755201 Collective Minds Gaming
Page 53 of CM00056 Switch Up Test Report SZEM180800755201 Collective Minds Gaming
Page 54 of CM00056 Switch Up Test Report SZEM180800755201 Collective Minds Gaming
Page 55 of CM00056 Switch Up Test Report SZEM180800755201 Collective Minds Gaming
Page 56 of CM00056 Switch Up Test Report SZEM180800755201 Collective Minds Gaming
Page 57 of CM00056 Switch Up Test Report SZEM180800755201 Collective Minds Gaming
Page 58 of CM00056 Switch Up Test Report SZEM180800755201 Collective Minds Gaming
Page 59 of CM00056 Switch Up Test Report SZEM180800755201 Collective Minds Gaming
Page 60 of CM00056 Switch Up Test Report SZEM180800755201 Collective Minds Gaming
Page 61 of CM00056 Switch Up Test Report SZEM180800755201 Collective Minds Gaming
Page 62 of CM00056 Switch Up Test Report SZEM180800755201 Collective Minds Gaming
Page 63 of CM00056 Switch Up Test Report SZEM180800755201 Collective Minds Gaming
Page 64 of CM00056 Switch Up Test Report SZEM180800755201 Collective Minds Gaming
Page 65 of CM00056 Switch Up Test Report SZEM180800755201 Collective Minds Gaming
Page 66 of CM00056 Switch Up Test Report SZEM180800755201 Collective Minds Gaming
Page 67 of CM00056 Switch Up Test Report SZEM180800755201 Collective Minds Gaming
Page 68 of CM00056 Switch Up Test Report SZEM180800755201 Collective Minds Gaming
Page 69 of CM00056 Switch Up Test Report SZEM180800755201 Collective Minds Gaming
Page 70 of CM00056 Switch Up Test Report SZEM180800755201 Collective Minds Gaming
Page 71 of CM00056 Switch Up Test Report SZEM180800755201 Collective Minds Gaming
Page 72 of CM00056 Switch Up Test Report SZEM180800755201 Collective Minds Gaming
Page 73 of CM00056 Switch Up Test Report SZEM180800755201 Collective Minds Gaming
Page 74 of CM00056 Switch Up Test Report SZEM180800755201 Collective Minds Gaming
Page 75 of CM00056 Switch Up Test Report SZEM180800755201 Collective Minds Gaming
Page 76 of CM00056 Switch Up Test Report SZEM180800755201 Collective Minds Gaming
Page 77 of CM00056 Switch Up Test Report SZEM180800755201 Collective Minds Gaming
Page 78 of CM00056 Switch Up Test Report SZEM180800755201 Collective Minds Gaming
Page 79 of CM00056 Switch Up Test Report SZEM180800755201 Collective Minds Gaming
Page 80 of CM00056 Switch Up Test Report SZEM180800755201 Collective Minds Gaming
Page 81 of CM00056 Switch Up Test Report SZEM180800755201 Collective Minds Gaming
Page 82 of CM00056 Switch Up Test Report SZEM180800755201 Collective Minds Gaming
Page 83 of CM00056 Switch Up Test Report SZEM180800755201 Collective Minds Gaming
Page 84 of CM00056 Switch Up Test Report SZEM180800755201 Collective Minds Gaming
Page 85 of CM00056 Switch Up Test Report SZEM180800755201 Collective Minds Gaming
Page 86 of CM00056 Switch Up Test Report SZEM180800755201 Collective Minds Gaming
Page 87 of CM00056 Switch Up Test Report SZEM180800755201 Collective Minds Gaming
Page 88 of CM00056 Switch Up Test Report SZEM180800755201 Collective Minds Gaming
Page 89 of CM00056 Switch Up Test Report SZEM180800755201 Collective Minds Gaming
Page 90 of CM00056 Switch Up Test Report SZEM180800755201 Collective Minds Gaming
Page 91 of CM00056 Switch Up Test Report SZEM180800755201 Collective Minds Gaming
Page 92 of CM00056 Switch Up Test Report SZEM180800755201 Collective Minds Gaming
Page 93 of CM00056 Switch Up Test Report SZEM180800755201 Collective Minds Gaming
Page 94 of CM00056 Switch Up Test Report SZEM180800755201 Collective Minds Gaming

SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
No. 1 Workshop, M-10, Middle section, Science & Technology Park,
Shenzhen, Guangdong, China 518057
Telephone:
Fax:
Email:
Report No.: SZEM180800755201
Page:
1 of 94
+86 (0) 755 2601 2053
+86 (0) 755 2671 0594
ee.shenzhen@sgs.com
TEST REPORT
Application No.:
SZEM1808007552CR
Applicant:
Address of Applicant:
Collective Minds Gaming Co., Ltd.
5000 Jean Talon West, Suite# 250, Montreal, Quebec, Montreal H4P 1W9,
Canada
Manufacturer/ Factory:
Address of Manufacturer/
Factory:
DongGuan KingSheng Electronics&Tech Co., Ltd
Building 39, Arising Sun Industrial City, LinCun Village, TangXia Town City,
DongGuan City, China 523711
Equipment Under Test (EUT):
EUT Name:
Switch Up
Model No.:
CM00056
FCC ID:
2AEVWCM00056
Standard(s) :
47 CFR Part 15, Subpart C 15.247
Date of Receipt:
2018-08-17
Date of Test:
2018-08-21 to 2018-08-23
Date of Issue:
2018-08-23
Test Result:
Pass*
* In the configuration tested, the EUT complied with the standards specified above.
Keny Xu
EMC Laboratory Manager
The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report.
If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new
system complies with all relevant standards. Any mention of SGS International Electrical Approvals or testing done by SGS International
Electrical Approvals in connection with, distribution or use of the product described in this report must be approved by SGS International
Electrical Approvals in writing.
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM180800755201
Page:
2 of 94
Revision Record
Version
Chapter
01
Date
2018-08-23
Modifier
Remark
Original
Authorized for issue by:
Leo Li /Project Engineer
Eric Fu /Reviewer
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM180800755201
Page:
3 of 94
Test Summary
Radio Spectrum Technical Requirement
Item
Standard
Method
Requirement
Result
Antenna Requirement
47 CFR Part 15,
Subpart C 15.247
N/A
47 CFR Part 15, Subpart
C 15.203 & 15.247(c)
Pass
Other requirements
Frequency Hopping
Spread Spectrum
System Hopping
Sequence
47 CFR Part 15,
Subpart C 15.247
N/A
47 CFR Part 15, Subpart
C 15.247(a)(1),(g),(h)
Pass
Method
Requirement
Result
ANSI C63.10 (2013)
Section 6.2
47 CFR Part 15, Subpart
C 15.207
Pass
Radio Spectrum Matter Part
Item
Standard
Conducted Emissions
47 CFR Part 15,
at AC Power Line
Subpart C 15.247
(150kHz-30MHz)
Conducted Peak
Output Power
47 CFR Part 15,
Subpart C 15.247
ANSI C63.10 (2013)
Section 7.8.5
47 CFR Part 15, Subpart
C 15.247(b)(1)
Pass
20dB Bandwidth
47 CFR Part 15,
Subpart C 15.247
ANSI C63.10 (2013)
Section 7.8.7
47 CFR Part 15, Subpart
C 15.247(a)(1)
Pass
Carrier Frequencies
Separation
47 CFR Part 15,
Subpart C 15.247
ANSI C63.10 (2013)
Section 7.8.2
47 CFR Part 15, Subpart
C 15.247a(1)
Pass
Hopping Channel
Number
47 CFR Part 15,
Subpart C 15.247
ANSI C63.10 (2013)
Section 7.8.3
47 CFR Part 15, Subpart
C 15.247a(1)(iii)
Pass
Dwell Time
47 CFR Part 15,
Subpart C 15.247
ANSI C63.10 (2013)
Section 7.8.4
47 CFR Part 15, Subpart
C 15.247a(1)(iii)
Pass
Conducted Band
Edges Measurement
47 CFR Part 15,
Subpart C 15.247
ANSI C63.10 (2013)
Section 7.8.6
47 CFR Part 15, Subpart
C 15.247(d)
Pass
Conducted Spurious
Emissions
47 CFR Part 15,
Subpart C 15.247
ANSI C63.10 (2013)
Section 7.8.8
47 CFR Part 15, Subpart
C 15.247(d)
Pass
Radiated Emissions
which fall in the
restricted bands
47 CFR Part 15,
Subpart C 15.247
ANSI C63.10 (2013)
Section 6.10.5
47 CFR Part 15, Subpart
C 15.205 & 15.209
Pass
Radiated Spurious
Emissions
47 CFR Part 15,
Subpart C 15.247
ANSI C63.10 (2013)
Section 6.4,6.5,6.6
47 CFR Part 15, Subpart
C 15.205 & 15.209
Pass
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM180800755201
Page:
4 of 94
Contents
Page
COVER PAGE ............................................................................................................................................1
TEST SUMMARY .......................................................................................................................................3
CONTENTS ................................................................................................................................................4
GENERAL INFORMATION ........................................................................................................................6
4.1
4.2
4.3
4.4
4.5
4.6
4.7
DETAILS OF E.U.T. ...............................................................................................................................6
DESCRIPTION OF SUPPORT UNITS .........................................................................................................6
MEASUREMENT UNCERTAINTY ..............................................................................................................6
TEST LOCATION....................................................................................................................................7
TEST FACILITY......................................................................................................................................7
DEVIATION FROM STANDARDS ...............................................................................................................7
ABNORMALITIES FROM STANDARD CONDITIONS .....................................................................................7
EQUIPMENT LIST ......................................................................................................................................8
RADIO SPECTRUM TECHNICAL REQUIREMENT ...............................................................................12
6.1
ANTENNA REQUIREMENT ....................................................................................................................12
6.1.1 Test Requirement: .......................................................................................................................12
6.1.2 Conclusion ...................................................................................................................................12
6.2
OTHER REQUIREMENTS FREQUENCY HOPPING SPREAD SPECTRUM SYSTEM HOPPING SEQUENCE ........13
6.2.1 Test Requirement: .......................................................................................................................13
6.2.2 Conclusion ...................................................................................................................................13
RADIO SPECTRUM MATTER TEST RESULTS .....................................................................................14
7.1
CONDUCTED EMISSIONS AT AC POWER LINE (150KHZ-30MHZ)...........................................................14
7.1.1 E.U.T. Operation ..........................................................................................................................15
7.1.2 Test Setup Diagram .....................................................................................................................15
7.1.3 Measurement Procedure and Data.............................................................................................15
7.2
CONDUCTED PEAK OUTPUT POWER ....................................................................................................18
7.2.1 E.U.T. Operation ..........................................................................................................................19
7.2.2 Test Setup Diagram .....................................................................................................................19
7.2.3 Measurement Procedure and Data.............................................................................................19
7.3
20DB BANDWIDTH ..............................................................................................................................20
7.3.1 E.U.T. Operation ..........................................................................................................................20
7.3.2 Test Setup Diagram .....................................................................................................................20
7.3.3 Measurement Procedure and Data.............................................................................................20
7.4
CARRIER FREQUENCIES SEPARATION ..................................................................................................21
7.4.1 E.U.T. Operation ..........................................................................................................................21
7.4.2 Test Setup Diagram .....................................................................................................................21
7.4.3 Measurement Procedure and Data.............................................................................................21
7.5
HOPPING CHANNEL NUMBER...............................................................................................................22
7.5.1 E.U.T. Operation ..........................................................................................................................22
7.5.2 Test Setup Diagram .....................................................................................................................22
7.5.3 Measurement Procedure and Data.............................................................................................22
7.6
DWELL TIME .......................................................................................................................................23
7.6.1 E.U.T. Operation ..........................................................................................................................23
7.6.2 Test Setup Diagram .....................................................................................................................23
7.6.3 Measurement Procedure and Data.............................................................................................23
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM180800755201
Page:
5 of 94
7.7
CONDUCTED BAND EDGES MEASUREMENT ..........................................................................................24
7.7.1 E.U.T. Operation ..........................................................................................................................25
7.7.2 Test Setup Diagram .....................................................................................................................25
7.7.3 Measurement Procedure and Data.............................................................................................25
7.8
CONDUCTED SPURIOUS EMISSIONS.....................................................................................................26
7.8.1 E.U.T. Operation ..........................................................................................................................27
7.8.2 Test Setup Diagram .....................................................................................................................27
7.8.3 Measurement Procedure and Data.............................................................................................27
7.9
RADIATED EMISSIONS WHICH FALL IN THE RESTRICTED BANDS ..............................................................28
7.9.1 E.U.T. Operation ..........................................................................................................................29
7.9.2 Test Setup Diagram .....................................................................................................................29
7.9.3 Measurement Procedure and Data.............................................................................................30
7.10
RADIATED SPURIOUS EMISSIONS ........................................................................................................35
7.10.1
E.U.T. Operation ......................................................................................................................36
7.10.2
Test Setup Diagram.................................................................................................................36
7.10.3
Measurement Procedure and Data ........................................................................................37
PHOTOGRAPHS ......................................................................................................................................46
8.1
8.2
8.3
8.4
CONDUCTED EMISSIONS AT AC POWER LINE (150KHZ-30MHZ) TEST SETUP .......................................46
RADIATED EMISSIONS WHICH FALL IN THE RESTRICTED BANDS TEST SETUP ..........................................46
RADIATED SPURIOUS EMISSIONS TEST SETUP .....................................................................................47
EUT CONSTRUCTIONAL DETAILS (EUT PHOTOS).................................................................................47
APPENDIX ................................................................................................................................................48
9.1
APPENDIX 15.247 ........................................................................................................................ 48-94
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM180800755201
Page:
6 of 94
General Information
4.1 Details of E.U.T.
Power supply:
DC 5V
Bluetooth Version:
V4.0 single mode
Channel Spacing
1MHz
Modulation Type
GFSK, π/4DQPSK, 8DPSK
Number of Channels
79
Operation Frequency
2402MHz to 2480MHz
Spectrum Spread Technology
Frequency Hopping Spread Spectrum(FHSS)
Antenna Type
PCB Antenna
Antenna Gain
0dBi
4.2 Description of Support Units
Description
Manufacturer
Model No.
Serial No.
Lenovo
T430u
REF. No.SEA1800
Sony
CUH-1109A
REF. No.SEA5400
L17711pC
Router
Lenovo
NETGEAR
JNR3300
REF. No.:SEA2502
REF. No.:SEA2200
Mouse
Lenovo
MO28UOA
REF. No.:SEA2402
Laptop
PS4
LCD-Displaying
4.3 Measurement Uncertainty
No.
Item
Measurement Uncertainty
Radio Frequency
± 7.25 x 10-8
Duty cycle
± 0.37%
Occupied Bandwidth
± 3%
RF conducted power
± 0.75dB
RF power density
± 2.84dB
Conducted Spurious emissions
± 0.75dB
RF Radiated power
Radiated Spurious emission test
Temperature test
± 4.5dB (below 1GHz)
± 4.8dB (above 1GHz)
± 4.5dB (Below 1GHz)
± 4.8dB (Above 1GHz)
± 1°C
10
Humidity test
± 3%
11
Supply voltages
± 1.5%
12
Time
± 3%
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM180800755201
Page:
7 of 94
4.4 Test Location
All tests were performed at:
SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen Branch
No. 1 Workshop, M-10, Middle Section, Science & Technology Park, Shenzhen, Guangdong, China.
518057.
Tel: +86 755 2601 2053
Fax: +86 755 2671 0594
No tests were sub-contracted.
4.5 Test Facility
The test facility is recognized, certified, or accredited by the following organizations:
• CNAS (No. CNAS L2929)
CNAS has accredited SGS-CSTC Standards Technical Services Co., Ltd. Shenzhen Branch EMC
Lab to ISO/IEC 17025:2005 General Requirements for the Competence of Testing and Calibration
Laboratories (CNAS-CL01 Accreditation Criteria for the Competence of Testing and Calibration
Laboratories) for the competence in the field of testing.
• A2LA (Certificate No. 3816.01)
SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory is accredited by the
American Association for Laboratory Accreditation(A2LA). Certificate No. 3816.01.
• VCCI
The 3m Fully-anechoic chamber for above 1GHz, 10m Semi-anechoic chamber for below 1GHz,
Shielded Room for Mains Port Conducted Interference Measurement and Telecommunication Port
Conducted Interference Measurement of SGS-CSTC Standards Technical Services Co., Ltd. have
been registered in accordance with the Regulations for Voluntary Control Measures with Registration
No.: G-20026, R-14188, C-12383 and T-11153 respectively.
• FCC –Designation Number: CN1178
SGS-CSTC Standards Technical Services Co., Ltd., Shenzhen EMC Laboratory has been recognized
as an accredited testing laboratory.
Designation Number: CN1178. Test Firm Registration Number: 406779.
• Industry Canada (IC)
Two 3m Semi-anechoic chambers and the 10m Semi-anechoic chamber of SGS-CSTC Standards
Technical Services Co., Ltd. Shenzhen Branch EMC Lab have been registered by Certification and
Engineering Bureau of Industry Canada for radio equipment testing with Registration No.: 4620C-1,
4620C-2, 4620C-3.
4.6 Deviation from Standards
None
4.7 Abnormalities from Standard Conditions
None
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM180800755201
Page:
8 of 94
Equipment List
Conducted Emissions at AC Power Line (150kHz-30MHz)
Equipment
Manufacturer
Model No
Inventory No
Cal Date
Cal Due Date
Shielding Room
ZhongYu Electron
GB-88
SEM001-06
2017-05-10
2020-05-09
Measurement Software
AUDIX
e3 V5.4.1221d
N/A
N/A
N/A
Coaxial Cable
SGS
N/A
SEM024-01
2018-07-12
2019-07-11
LISN
Rohde & Schwarz
ENV216
SEM007-01
2017-09-27
2018-09-26
LISN
ETS-LINDGREN
3816/2
SEM007-02
2018-04-02
2019-04-01
EMI Test Receiver
Rohde & Schwarz
ESCI
SEM004-02
2018-04-02
2019-04-01
Conducted Peak Output Power
Equipment
Manufacturer
Model No
Inventory No
Cal Date
Cal Due Date
DC Power Supply
ZhaoXin
RXN-305D
SEM011-02
2017-09-27
2018-09-26
Spectrum Analyzer
Rohde & Schwarz
FSP
SEM004-06
2017-09-27
2018-09-26
Measurement Software
JS Tonscend
JS1120-2
BT/WIFI V2.
N/A
N/A
N/A
Coaxial Cable
SGS
N/A
SEM031-02
2018-07-12
2019-07-11
Attenuator
Weinschel Associates
WA41
SEM021-09
N/A
N/A
Signal Generator
KEYSIGHT
N5173B
SEM006-05
2017-09-27
2018-09-26
Power Meter
Rohde & Schwarz
NRVS
SEM014-02
2017-09-27
2018-09-26
Equipment
Manufacturer
Model No
Inventory No
Cal Date
Cal Due Date
DC Power Supply
ZhaoXin
RXN-305D
SEM011-02
2017-09-27
2018-09-26
Spectrum Analyzer
Rohde & Schwarz
FSP
SEM004-06
2017-09-27
2018-09-26
Measurement Software
JS Tonscend
JS1120-2
BT/WIFI V2.
N/A
N/A
N/A
Coaxial Cable
SGS
N/A
SEM031-02
2018-07-12
2019-07-11
Attenuator
Weinschel Associates
WA41
SEM021-09
N/A
N/A
Signal Generator
KEYSIGHT
N5173B
SEM006-05
2017-09-27
2018-09-26
Power Meter
Rohde & Schwarz
NRVS
SEM014-02
2017-09-27
2018-09-26
Manufacturer
Model No
Inventory No
Cal Date
Cal Due Date
20dB Bandwidth
Carrier Frequencies Separation
Equipment
DC Power Supply
ZhaoXin
RXN-305D
SEM011-02
2017-09-27
2018-09-26
Spectrum Analyzer
Rohde & Schwarz
FSP
SEM004-06
2017-09-27
2018-09-26
Measurement Software
JS Tonscend
JS1120-2
BT/WIFI V2.
N/A
N/A
N/A
Coaxial Cable
SGS
N/A
SEM031-02
2018-07-12
2019-07-11
Attenuator
Weinschel Associates
WA41
SEM021-09
N/A
N/A
Signal Generator
KEYSIGHT
N5173B
SEM006-05
2017-09-27
2018-09-26
Power Meter
Rohde & Schwarz
NRVS
SEM014-02
2017-09-27
2018-09-26
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM180800755201
Page:
9 of 94
Hopping Channel Number
Equipment
Manufacturer
Model No
Inventory No
Cal Date
Cal Due Date
DC Power Supply
ZhaoXin
RXN-305D
SEM011-02
2017-09-27
2018-09-26
Spectrum Analyzer
Rohde & Schwarz
FSP
SEM004-06
2017-09-27
2018-09-26
Measurement Software
JS Tonscend
JS1120-2
BT/WIFI V2.
N/A
N/A
N/A
Coaxial Cable
SGS
N/A
SEM031-02
2018-07-12
2019-07-11
Attenuator
Weinschel Associates
WA41
SEM021-09
N/A
N/A
Signal Generator
KEYSIGHT
N5173B
SEM006-05
2017-09-27
2018-09-26
Power Meter
Rohde & Schwarz
NRVS
SEM014-02
2017-09-27
2018-09-26
Equipment
Manufacturer
Model No
Inventory No
Cal Date
Cal Due Date
DC Power Supply
ZhaoXin
RXN-305D
SEM011-02
2017-09-27
2018-09-26
Spectrum Analyzer
Rohde & Schwarz
FSP
SEM004-06
2017-09-27
2018-09-26
Measurement Software
JS Tonscend
JS1120-2
BT/WIFI V2.
N/A
N/A
N/A
Coaxial Cable
SGS
N/A
SEM031-02
2018-07-12
2019-07-11
Attenuator
Weinschel Associates
WA41
SEM021-09
N/A
N/A
Signal Generator
KEYSIGHT
N5173B
SEM006-05
2017-09-27
2018-09-26
Power Meter
Rohde & Schwarz
NRVS
SEM014-02
2017-09-27
2018-09-26
Dwell Time
Conducted Band Edges Measurement
Equipment
Manufacturer
Model No
Inventory No
Cal Date
Cal Due Date
DC Power Supply
ZhaoXin
RXN-305D
SEM011-02
2017-09-27
2018-09-26
Spectrum Analyzer
Rohde & Schwarz
FSP
SEM004-06
2017-09-27
2018-09-26
Measurement Software
JS Tonscend
JS1120-2
BT/WIFI V2.
N/A
N/A
N/A
Coaxial Cable
SGS
N/A
SEM031-02
2018-07-12
2019-07-11
Attenuator
Weinschel Associates
WA41
SEM021-09
N/A
N/A
Signal Generator
KEYSIGHT
N5173B
SEM006-05
2017-09-27
2018-09-26
Power Meter
Rohde & Schwarz
NRVS
SEM014-02
2017-09-27
2018-09-26
Manufacturer
Model No
Inventory No
Cal Date
Cal Due Date
Conducted Spurious Emissions
Equipment
DC Power Supply
ZhaoXin
RXN-305D
SEM011-02
2017-09-27
2018-09-26
Spectrum Analyzer
Rohde & Schwarz
FSP
SEM004-06
2017-09-27
2018-09-26
Measurement Software
JS Tonscend
JS1120-2
BT/WIFI V2.
N/A
N/A
N/A
Coaxial Cable
SGS
N/A
SEM031-02
2018-07-12
2019-07-11
Attenuator
Weinschel Associates
WA41
SEM021-09
N/A
N/A
Signal Generator
KEYSIGHT
N5173B
SEM006-05
2017-09-27
2018-09-26
Power Meter
Rohde & Schwarz
NRVS
SEM014-02
2017-09-27
2018-09-26
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM180800755201
Page:
10 of 94
Radiated Emissions which fall in the restricted bands
Equipment
Manufacturer
Model No
Inventory No
Cal Date
Cal Due Date
3m Semi-Anechoic
Chamber
AUDIX
N/A
SEM001-02
2018-03-13
2021-03-12
Measurement Software
AUDIX
e3 V8.2014-627
N/A
N/A
N/A
Coaxial Cable
SGS
N/A
SEM026-01
2018-07-12
2019-07-11
Spectrum Analyzer
Rohde & Schwarz
FSU43
SEM004-08
2018-04-02
2019-04-01
BiConiLog Antenna
(26-3000MHz)
ETS-Lindgren
3142C
SEM003-01
2017-06-27
2020-06-26
Horn Antenna
(1-18GHz)
Rohde & Schwarz
HF907
SEM003-07
2018-04-13
2021-04-12
Horn Antenna
(15GHz-40GHz)
Schwarzbeck
BBHA 9170
SEM003-15
2017-10-17
2020-10-16
Pre-amplifier
(0.1-1300MHz)
HP
8447D
SEM005-02
2017-09-27
2018-09-26
Low Noise Amplifier
(100MHz-18GHz)
Black Diamond
Series
BDLNA-0118352810
SEM005-05
2017-09-27
2018-09-27
Pre-amplifier
(18-26GHz)
Rohde & Schwarz
CH14-H052
SEM005-17
2018-04-02
2019-04-01
Pre-amplifier
(26GHz-40GHz)
Compliance
Directions Systems
Inc.
PAP-2640-50
SEM005-08
2018-04-02
2019-04-01
DC Power Supply
Zhao Xin
RXN-305D
SEM011-02
2017-09-27
2018-09-26
Active Loop Antenna
ETS-Lindgren
6502
SEM003-08
2017-08-22
2020-08-21
Band filter
N/A
N/A
SEM023-01
N/A
N/A
Equipment
Manufacturer
Model No
Inventory No
Cal Date
Cal Due Date
3m Semi-Anechoic
Chamber
AUDIX
N/A
SEM001-02
2018-03-13
2021-03-12
Measurement Software
AUDIX
e3 V8.2014-627
N/A
N/A
N/A
Coaxial Cable
SGS
N/A
SEM026-01
2018-07-12
2019-07-11
Spectrum Analyzer
Rohde & Schwarz
FSU43
SEM004-08
2018-04-02
2019-04-01
BiConiLog Antenna
(26-3000MHz)
ETS-Lindgren
3142C
SEM003-01
2017-06-27
2020-06-26
Horn Antenna
(1-18GHz)
Rohde & Schwarz
HF907
SEM003-07
2018-04-13
2021-04-12
Horn Antenna
(15GHz-40GHz)
Schwarzbeck
BBHA 9170
SEM003-15
2017-10-17
2020-10-16
Pre-amplifier
(0.1-1300MHz)
HP
8447D
SEM005-02
2017-09-27
2018-09-26
Low Noise Amplifier
(100MHz-18GHz)
Black Diamond
Series
BDLNA-0118352810
SEM005-05
2017-09-27
2018-09-27
Radiated Spurious Emissions
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM180800755201
Page:
11 of 94
Pre-amplifier
(18-26GHz)
Rohde & Schwarz
CH14-H052
SEM005-17
2018-04-02
2019-04-01
Pre-amplifier
(26GHz-40GHz)
Compliance
Directions Systems
Inc.
PAP-2640-50
SEM005-08
2018-04-02
2019-04-01
DC Power Supply
Zhao Xin
RXN-305D
SEM011-02
2017-09-27
2018-09-26
Active Loop Antenna
ETS-Lindgren
6502
SEM003-08
2017-08-22
2020-08-21
Band filter
N/A
N/A
SEM023-01
N/A
N/A
Equipment
Manufacturer
Model No
Inventory No
Cal Date
Cal Due Date
Humidity/ Temperature
Indicator
Shanghai
Meteorological
Industry Factory
ZJ1-2B
SEM002-03
2017-09-29
2018-09-28
Humidity/ Temperature
Indicator
Shanghai
Meteorological
Industry Factory
ZJ1-2B
SEM002-04
2017-09-29
2018-09-28
Humidity/ Temperature
Indicator
Mingle
N/A
SEM002-08
2017-09-29
2018-09-28
Barometer
Changchun
Meteorological
Industry Factory
DYM3
SEM002-01
2018-04-08
2019-04-07
General used equipment
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM180800755201
Page:
12 of 94
Radio Spectrum Technical Requirement
6.1 Antenna Requirement
6.1.1 Test Requirement:
47 CFR Part 15, Subpart C 15.203 & 15.247(c)
6.1.2 Conclusion
Standard Requirement:
An intentional radiator shall be designed to ensure that no antenna other than that furnished by the
responsible party shall be used with the device. The use of a permanently attached antenna or of an
antenna that uses a unique coupling to the intentional radiator, the manufacturer may design the unit
so that a broken antenna can be replaced by the user, but the use of a standard antenna jack or
electrical connector is prohibited.
15.247(b) (4) requirement:
The conducted output power limit specified in paragraph (b) of this section is based on the use of
antennas with directional gains that do not exceed 6 dBi. Except as shown in paragraph (c) of this
section, if transmitting antennas of directional gain greater than 6 dBi are used, the conducted output
power from the intentional radiator shall be reduced below the stated values in paragraphs (b)(1),
(b)(2), and (b)(3) of this section, as appropriate, by the amount in dB that the directional gain of the
antenna exceeds 6 dBi.
EUT Antenna:
The antenna is integrated on the main PCB and no consideration of replacement. The best case gain
of the antenna is 0dBi.
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM180800755201
Page:
13 of 94
6.2 Other requirements Frequency Hopping Spread Spectrum System Hopping
Sequence
6.2.1 Test Requirement:
47 CFR Part 15, Subpart C 15.247(a)(1),(g),(h)
6.2.2 Conclusion
Standard Requirement:
The system shall hop to channel frequencies that are selected at the system hopping rate from a
Pseudorandom ordered list of hopping frequencies. Each frequency must be used equally on the
average by each transmitter. The system receivers shall have input bandwidths that match the
hopping channel bandwidths of their corresponding transmitters and shall shift frequencies in
synchronization with the transmitted signals.
Frequency hopping spread spectrum systems are not required to employ all available hopping
channels during each transmission. However, the system, consisting of both the transmitter and the
receiver, must be designed to comply with all of the regulations in this section should the transmitter
be presented with a continuous data (or information) stream. In addition, a system employing short
transmission bursts must comply with the definition of a frequency hopping system and must
distribute its transmissions over the minimum number of hopping channels specified in this section.
The incorporation of intelligence within a frequency hopping spread spectrum system that permits the
system to recognize other users within the spectrum band so that it individually and independently
chooses and adapts its hopsets to avoid hopping on occupied channels is permitted. The
coordination of frequency hopping systems in any other manner for the express purpose of avoiding
the simultaneous occupancy of individual hopping frequencies by multiple transmitters is not
permitted.
Compliance for section 15.247(a)(1):
According to Technical Specification, the pseudorandom sequence may be generated in a nine-stage
shift register whose 5th and 9th stage outputs are added in a modulo-two addition stage. And the
result is fed back to the input of the first stage. The sequence begins with the first ONE of 9
consecutive ONEs; i.e. the shift register is initialized with nine ones.
> Number of shift register stages: 9
> Length of pseudo-random sequence: 29 -1 = 511 bits
> Longest sequence of zeros: 8 (non-inverted signal)
Linear Feedback Shift Register for Generation of the PRBS sequence
An example of Pseudorandom Frequency Hopping Sequence as follow:
Each frequency used equally on the average by each transmitter.
According to Technical Specification, the receivers are designed to have input and IF bandwidths that
match the hopping channel bandwidths of any transmitters and shift frequencies in synchronization
with the transmitted signals.
Compliance for section 15.247(g):
According to Technical Specification, the system transmits the packet with the pseudorandom
hopping frequency with a continuous data and the short burst transmission from the Bluetooth system
is also transmitted under the frequency hopping system with the pseudorandom hopping frequency
system.
Compliance for section 15.247(h):
According to Technical specification, the system incorporates with an adaptive system to detect other
user within the spectrum band so that it individually and independently to avoid hopping on the
occupied channels.
The system is designed not have the ability to coordinated with other FHSS System in an effort to
avoid the simultaneous occupancy of individual hopping frequencies by multiple transmitter.
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM180800755201
Page:
14 of 94
Radio Spectrum Matter Test Results
7.1 Conducted Emissions at AC Power Line (150kHz-30MHz)
Test Requirement
Test Method:
Limit:
Frequency of emission(MHz)
47 CFR Part 15, Subpart C 15.207
ANSI C63.10 (2013) Section 6.2
Conducted limit(dBµV)
Quasi-peak
Average
0.15-0.5
66 to 56*
56 to 46*
0.5-5
56
46
5-30
60
50
*Decreases with the logarithm of the frequency.
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM180800755201
Page:
15 of 94
7.1.1 E.U.T. Operation
Operating Environment:
Temperature:
21.5 °C
Atmospheric Pressure: 1000 mbar
Humidity: 73.1 % RH
Test mode
b:TX_non-Hop mode_Keep the EUT in continuously transmitting mode with GFSK
modulation, π/4DQPSK modulation, 8DPSK modulation. All modes have been
tested and only the data of worst case is recorded in the report.
7.1.2 Test Setup Diagram
7.1.3 Measurement Procedure and Data
1) The mains terminal disturbance voltage test was conducted in a shielded room.
2) The EUT was connected to AC power source through a LISN 1 (Line Impedance Stabilization
Network) which provides a 50ohm/50µH + 5ohm linear impedance. The power cables of all other
units of the EUT were connected to a second LISN 2, which was bonded to the ground reference
plane in the same way as the LISN 1 for the unit being measured. A multiple socket outlet strip was
used to connect multiple power cables to a single LISN provided the rating of the LISN was not
exceeded.
3) The tabletop EUT was placed upon a non-metallic table 0.8m above the ground reference plane.
And for floor-standing arrangement, the EUT was placed on the horizontal ground reference plane,
4) The test was performed with a vertical ground reference plane. The rear of the EUT shall be 0.4 m
from the vertical ground reference plane. The vertical ground reference plane was bonded to the
horizontal ground reference plane. The LISN 1 was placed 0.8 m from the boundary of the unit under
test and bonded to a ground reference plane for LISNs mounted on top of the ground reference
plane. This distance was between the closest points of the LISN 1 and the EUT. All other units of the
EUT and associated equipment was at least 0.8 m from the LISN 2.
5) In order to find the maximum emission, the relative positions of equipment and all of the interface
cables must be changed according to ANSI C63.10 on conducted measurement.
Remark: LISN=Read Level+ Cable Loss+ LISN Factor
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM180800755201
Page:
16 of 94
Mode:b; Line:Live Line
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM180800755201
Page:
17 of 94
Mode:b; Line:Neutral Line
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM180800755201
Page:
18 of 94
7.2 Conducted Peak Output Power
Test Requirement
Test Method:
Limit:
47 CFR Part 15, Subpart C 15.247(b)(1)
ANSI C63.10 (2013) Section 7.8.5
Frequency range(MHz)
Output power of the intentional radiator(watt)
1 for ≥50 hopping channels
902-928
0.25 for 25≤ hopping channels <50
1 for digital modulation
2400-2483.5
0.125 for all other frequency hopping systems
1 for ≥75 non-overlapping hopping channels
1 for digital modulation
5725-5850
1 for frequency hopping systems and digital modulation
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM180800755201
Page:
19 of 94
7.2.1 E.U.T. Operation
Operating Environment:
Temperature:
24.5 °C
Atmospheric Pressure: 1000 mbar
Humidity: 62.6 % RH
Test mode
b:TX_non-Hop mode_Keep the EUT in continuously transmitting mode with GFSK
modulation, π/4DQPSK modulation, 8DPSK modulation. All modes have been
tested and only the data of worst case is recorded in the report.
7.2.2 Test Setup Diagram
7.2.3 Measurement Procedure and Data
The detailed test data see: Appendix 15.247
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM180800755201
Page:
20 of 94
7.3 20dB Bandwidth
Test Requirement
47 CFR Part 15, Subpart C 15.247(a)(1)
Test Method:
ANSI C63.10 (2013) Section 7.8.7
7.3.1 E.U.T. Operation
Operating Environment:
Temperature:
24.5 °C
Atmospheric Pressure: 1000 mbar
Humidity: 62.6 % RH
Test mode
b:TX_non-Hop mode_Keep the EUT in continuously transmitting mode with GFSK
modulation, π/4DQPSK modulation, 8DPSK modulation. All modes have been
tested and only the data of worst case is recorded in the report.
7.3.2 Test Setup Diagram
7.3.3 Measurement Procedure and Data
The detailed test data see: Appendix 15.247
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM180800755201
Page:
21 of 94
7.4 Carrier Frequencies Separation
Test Requirement
Test Method:
Limit:
47 CFR Part 15, Subpart C 15.247a(1)
ANSI C63.10 (2013) Section 7.8.2
2/3 of the 20dB bandwidth base on the transmission power is less than
0.125W
7.4.1 E.U.T. Operation
Operating Environment:
Temperature:
24.5 °C
Atmospheric Pressure: 1000 mbar
Humidity: 62.6 % RH
Test mode
a:TX_Hop mode_Keep the EUT in frequency hopping mode with GFSK
modulation, π/4DQPSK modulation, 8DPSK modulation. All modes have been
tested and only the data of worst case is recorded in the report.
7.4.2 Test Setup Diagram
7.4.3 Measurement Procedure and Data
The detailed test data see: Appendix 15.247
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM180800755201
Page:
22 of 94
7.5 Hopping Channel Number
Test Requirement
Test Method:
Limit:
47 CFR Part 15, Subpart C 15.247a(1)(iii)
ANSI C63.10 (2013) Section 7.8.3
Frequency range(MHz)
Number of hopping channels (minimum)
902-928
50 for 20dB bandwidth <250kHz
2400-2483.5
25 for 20dB bandwidth ≥250kHz
15
5725-5850
75
7.5.1 E.U.T. Operation
Operating Environment:
Temperature:
24.5 °C
Atmospheric Pressure: 1000 mbar
Humidity: 62.6 % RH
Test mode
a:TX_Hop mode_Keep the EUT in frequency hopping mode with GFSK
modulation, π/4DQPSK modulation, 8DPSK modulation. All modes have been
tested and only the data of worst case is recorded in the report.
7.5.2 Test Setup Diagram
7.5.3 Measurement Procedure and Data
The detailed test data see: Appendix 15.247
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM180800755201
Page:
23 of 94
7.6 Dwell Time
Test Requirement
Test Method:
Limit:
47 CFR Part 15, Subpart C 15.247a(1)(iii)
ANSI C63.10 (2013) Section 7.8.4
Frequency(MHz)
902-928
2400-2483.5
Limit
0.4S within a 20S period(20dB bandwidth<250kHz)
0.4S within a 10S period(20dB bandwidth≥250kHz)
0.4S within a period of 0.4S multiplied by the number
of hopping channels
5725-5850
0.4S within a 30S period
7.6.1 E.U.T. Operation
Operating Environment:
Temperature:
24.5 °C
Atmospheric Pressure: 1000 mbar
Humidity: 62.6 % RH
Test mode
a:TX_Hop mode_Keep the EUT in frequency hopping mode with GFSK
modulation, π/4DQPSK modulation, 8DPSK modulation. All modes have been
tested and only the data of worst case is recorded in the report.
7.6.2 Test Setup Diagram
7.6.3 Measurement Procedure and Data
The detailed test data see: Appendix 15.247
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM180800755201
Page:
24 of 94
7.7 Conducted Band Edges Measurement
Test Requirement
Test Method:
Limit:
47 CFR Part 15, Subpart C 15.247(d)
ANSI C63.10 (2013) Section 7.8.6
In any 100 kHz bandwidth outside the frequency band in which the spread
spectrum or digitally modulated intentional radiator is operating, the radio
frequency power that is produced by the intentional radiator shall be at least
20 dB below that in the 100 kHz bandwidth within the band that contains the
highest level of the desired power, based on either an RF conducted or a
radiated measurement, provided the transmitter demonstrates compliance
with the peak conducted power limits. If the transmitter complies with the
conducted power limits based on the use of RMS averaging over a time
interval, as permitted under paragraph (b)(3) of this section, the attenuation
required under this paragraph shall be 30 dB instead of 20 dB. Attenuation
below the general limits specified in §15.209(a) is not required. In addition,
radiated emissions which fall in the restricted bands, as defined in
§15.205(a), must also comply with the radiated emission limits specified in
§15.209(a) (see §15.205(c)
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM180800755201
Page:
25 of 94
7.7.1 E.U.T. Operation
Operating Environment:
Temperature:
24.5 °C
Atmospheric Pressure: 1000 mbar
Humidity: 62.6 % RH
Test mode:
a:TX_Hop mode_Keep the EUT in frequency hopping mode with GFSK
modulation, π/4DQPSK modulation, 8DPSK modulation. All modes have been
tested and only the data of worst case is recorded in the report.
b:TX_non-Hop mode_Keep the EUT in continuously transmitting mode with GFSK
modulation, π/4DQPSK modulation, 8DPSK modulation. All modes have been
tested and only the data of worst case is recorded in the report.
7.7.2 Test Setup Diagram
7.7.3 Measurement Procedure and Data
The detailed test data see: Appendix 15.247
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM180800755201
Page:
26 of 94
7.8 Conducted Spurious Emissions
Test Requirement
Test Method:
Limit:
47 CFR Part 15, Subpart C 15.247(d)
ANSI C63.10 (2013) Section 7.8.8
In any 100 kHz bandwidth outside the frequency band in which the spread
spectrum or digitally modulated intentional radiator is operating, the radio
frequency power that is produced by the intentional radiator shall be at least
20 dB below that in the 100 kHz bandwidth within the band that contains the
highest level of the desired power, based on either an RF conducted or a
radiated measurement, provided the transmitter demonstrates compliance
with the peak conducted power limits. If the transmitter complies with the
conducted power limits based on the use of RMS averaging over a time
interval, as permitted under paragraph (b)(3) of this section, the attenuation
required under this paragraph shall be 30 dB instead of 20 dB. Attenuation
below the general limits specified in §15.209(a) is not required. In addition,
radiated emissions which fall in the restricted bands, as defined in
§15.205(a), must also comply with the radiated emission limits specified in
§15.209(a) (see §15.205(c)
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM180800755201
Page:
27 of 94
7.8.1 E.U.T. Operation
Operating Environment:
Temperature:
24.5 °C
Atmospheric Pressure: 1000 mbar
Humidity: 62.6 % RH
Test mode
b:TX_non-Hop mode_Keep the EUT in continuously transmitting mode with GFSK
modulation, π/4DQPSK modulation, 8DPSK modulation. All modes have been
tested and only the data of worst case is recorded in the report.
7.8.2 Test Setup Diagram
7.8.3 Measurement Procedure and Data
The detailed test data see: Appendix 15.247
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM180800755201
Page:
28 of 94
7.9 Radiated Emissions which fall in the restricted bands
Test Requirement
47 CFR Part 15, Subpart C 15.205 & 15.209
Test Method:
ANSI C63.10 (2013) Section 6.10.5
Measurement Distance: 3m
Limit:
Frequency(MHz)
Field strength(microvolts/meter)
Measurement distance(meters)
0.009-0.490
2400/F(kHz)
300
0.490-1.705
24000/F(kHz)
30
1.705-30.0
30
30
30-88
100
88-216
150
216-960
200
Above 960
500
Remark: The emission limits shown in the above table are based on measurements employing a CISPR
quasi-peak detector except for the frequency bands 9-90kHz, 110-490kHz and above 1000 MHz. Radiated
emission limits in these three bands are based on measurements employing an average detector, the peak
field strength of any emission shall not exceed the maximum permitted average limits specified above by
more than 20 dB under any condition of modulation.
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM180800755201
Page:
29 of 94
7.9.1 E.U.T. Operation
Operating Environment:
Temperature:
25.6 °C
Atmospheric Pressure: 1000 mbar
Humidity: 59.8 % RH
Test mode
b:TX_non-Hop mode_Keep the EUT in continuously transmitting mode with GFSK
modulation, π/4DQPSK modulation, 8DPSK modulation. All modes have been
tested and only the data of worst case is recorded in the report.
7.9.2 Test Setup Diagram
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM180800755201
Page:
30 of 94
7.9.3 Measurement Procedure and Data
a. For below 1GHz, the EUT was placed on the top of a rotating table 0.8 meters above the ground at
a 3 or 10 meter semi-anechoic chamber. The table was rotated 360 degrees to determine the position
of the highest radiation.
b. For above 1GHz, the EUT was placed on the top of a rotating table 1.5 meters above the ground at
a 3 meter fully-anechoic chamber. The table was rotated 360 degrees to determine the position of the
highest radiation.
c. The EUT was set 3 or 10 meters away from the interference-receiving antenna, which was
mounted on the top of a variable-height antenna tower.
d. The antenna height is varied from one meter to four meters above the ground to determine the
maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set
to make the measurement.
e. For each suspected emission, the EUT was arranged to its worst case and then the antenna was
tuned to heights from 1 meter to 4 meters (for the test frequency of below 30MHz, the antenna was
tuned to heights 1 meter) and the rotatable table was turned from 0 degrees to 360 degrees to find
the maximum reading.
f. The test-receiver system was set to Peak Detect Function and Specified Bandwidth with Maximum
Hold Mode.
g. If the emission level of the EUT in peak mode was 10dB lower than the limit specified, then testing
could be stopped and the peak values of the EUT would be reported. Otherwise the emissions that
did not have 10dB margin would be re-tested one by one using peak, quasi-peak or average method
as specified and then reported in a data sheet.
h. Test the EUT in the lowest channel, the middle channel, the Highest channel.
i. The radiation measurements are performed in X, Y, Z axis positioning for Transmitting mode, and
found the X axis positioning which it is the worst case.
j. Repeat above procedures until all frequencies measured was complete.
Remark 1: Level= Read Level+ Cable Loss+ Antenna Factor- Preamp Factor
Remark 2: For frequencies above 1GHz, the field strength limits are based on average limits.
However, the peak field strength of any emission shall not exceed the maximum permitted average
limits specified above by more than 20 dB under any condition of modulation. For the emissions
whose peak level is lower than the average limit, only the peak measurement is shown in the report.
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM180800755201
Page:
31 of 94
Mode:b; Polarization:Horizontal; Modulation:GFSK; ; Channel:Low
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM180800755201
Page:
32 of 94
Mode:b; Polarization:Vertical; Modulation:GFSK; ; Channel:Low
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM180800755201
Page:
33 of 94
Mode:b; Polarization:Horizontal; Modulation:GFSK; ; Channel:High
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM180800755201
Page:
34 of 94
Mode:b; Polarization:Vertical; Modulation:GFSK; ; Channel:High
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM180800755201
Page:
35 of 94
7.10 Radiated Spurious Emissions
Test Requirement
47 CFR Part 15, Subpart C 15.205 & 15.209
Test Method:
ANSI C63.10 (2013) Section 6.4,6.5,6.6
Measurement Distance: 3m
Limit:
Frequency(MHz)
Field strength(microvolts/meter)
Measurement distance(meters)
0.009-0.490
2400/F(kHz)
300
0.490-1.705
24000/F(kHz)
30
1.705-30.0
30
30
30-88
100
88-216
150
216-960
200
Above 960
500
Remark: The emission limits shown in the above table are based on measurements employing a CISPR
quasi-peak detector except for the frequency bands 9-90kHz, 110-490kHz and above 1000 MHz. Radiated
emission limits in these three bands are based on measurements employing an average detector, the peak
field strength of any emission shall not exceed the maximum permitted average limits specified above by
more than 20 dB under any condition of modulation.
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM180800755201
Page:
36 of 94
7.10.1 E.U.T. Operation
Operating Environment:
Temperature:
24.1 °C
Atmospheric Pressure: 1000 mbar
Humidity: 61.9 % RH
Test mode
b:TX_non-Hop mode_Keep the EUT in continuously transmitting mode with GFSK
modulation, π/4DQPSK modulation, 8DPSK modulation. All modes have been
tested and only the data of worst case is recorded in the report.
7.10.2 Test Setup Diagram
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM180800755201
Page:
37 of 94
7.10.3 Measurement Procedure and Data
a. For below 1GHz, the EUT was placed on the top of a rotating table 0.8 meters above the ground at
a 3 or 10 meter semi-anechoic chamber. The table was rotated 360 degrees to determine the position
of the highest radiation.
b. For above 1GHz, the EUT was placed on the top of a rotating table 1.5 meters above the ground at
a 3 meter fully-anechoic chamber. The table was rotated 360 degrees to determine the position of the
highest radiation.
c. The EUT was set 3 or 10 meters away from the interference-receiving antenna, which was
mounted on the top of a variable-height antenna tower.
d. The antenna height is varied from one meter to four meters above the ground to determine the
maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set
to make the measurement.
e. For each suspected emission, the EUT was arranged to its worst case and then the antenna was
tuned to heights from 1 meter to 4 meters (for the test frequency of below 30MHz, the antenna was
tuned to heights 1 meter) and the rotatable table was turned from 0 degrees to 360 degrees to find
the maximum reading.
f. The test-receiver system was set to Peak Detect Function and Specified Bandwidth with Maximum
Hold Mode.
g. If the emission level of the EUT in peak mode was 10dB lower than the limit specified, then testing
could be stopped and the peak values of the EUT would be reported. Otherwise the emissions that
did not have 10dB margin would be re-tested one by one using peak, quasi-peak or average method
as specified and then reported in a data sheet.
h. Test the EUT in the lowest channel, the middle channel, the Highest channel.
i. The radiation measurements are performed in X, Y, Z axis positioning for Transmitting mode, and
found the X axis positioning which it is the worst case.
j. Repeat above procedures until all frequencies measured was complete.
Remark:
1) For emission below 1GHz, through pre-scan found the worst case is the lowest channel. Only the
worst case is recorded in the report.
2) The field strength is calculated by adding the Antenna Factor, Cable Factor & Preamplifier. The
basic equation with a sample calculation is as follows:
Final Test Level =Receiver Reading + Antenna Factor + Cable Factor – Preamplifier Factor
3) Scan from 9kHz to 25GHz, the disturbance above 18GHz and below 30MHz was very low. The
points marked on above plots are the highest emissions could be found when testing, so only above
points had been displayed. The amplitude of spurious emissions from the radiator which are
attenuated more than 20dB below the limit need not be reported.
4) For frequencies above 1GHz, the field strength limits are based on average limits. However, the
peak field strength of any emission shall not exceed the maximum permitted average limits specified
above by more than 20 dB under any condition of modulation. For the emissions whose peak level is
lower than the average limit, only the peak measurement is shown in the report.
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM180800755201
Page:
38 of 94
30MHz~1GHz
Mode: b; Polarization: Horizontal
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM180800755201
Page:
39 of 94
Mode: b; Polarization: Vertical
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM180800755201
Page:
40 of 94
Above 1GHz
Mode:b; Polarization:Horizontal; Modulation:GFSK; ; Channel:Low
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM180800755201
Page:
41 of 94
Mode:b; Polarization:Vertical; Modulation:GFSK; ; Channel:Low
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM180800755201
Page:
42 of 94
Mode:b; Polarization:Horizontal; Modulation:GFSK; ; Channel:middle
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM180800755201
Page:
43 of 94
Mode:b; Polarization:Vertical; Modulation:GFSK; ; Channel:middle
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM180800755201
Page:
44 of 94
Mode:b; Polarization:Horizontal; Modulation:GFSK; ; Channel:High
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM180800755201
Page:
45 of 94
Mode:b; Polarization:Vertical; Modulation:GFSK; ; Channel:High
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM180800755201
Page:
46 of 94
Photographs
8.1 Conducted Emissions at AC Power Line (150kHz-30MHz) Test Setup
8.2 Radiated Emissions which fall in the restricted bands Test Setup
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM180800755201
Page:
47 of 94
8.3 Radiated Spurious Emissions Test Setup
8.4 EUT Constructional Details (EUT Photos)
Refer to Appendix A - Photographs of EUT Constructional Details for SZEM1808007552CR.
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM180800755201
Page:
48 of 94
Appendix
9.1 Appendix 15.247
1.20 dB Bandwidth
Test Mode
Test Channel
EBW[MHz]
Limit[MHz]
Verdict
DH5
2402
0.790
---
PASS
DH5
2441
0.792
---
PASS
DH5
2480
0.796
---
PASS
2DH5
2402
1.100
---
PASS
2DH5
2441
1.090
---
PASS
2DH5
2480
1.078
---
PASS
3DH5
2402
1.074
---
PASS
3DH5
2441
1.072
---
PASS
3DH5
2480
1.068
---
PASS
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM180800755201
Page:
49 of 94
20 dB Bandwidth_DH5_2402
* RBW 30 kHz
Marker 3 [T1 ]
-18.74 dBm
2.402422000 GHz
* VBW 100 kHz
Ref
10
* Att
10 dBm
Offset
10 dB
* SWT 20 ms
Marker 1 [T1 ]
1.62
2.401852000
Marker 2 [T1 ]
-18.38
2.401632000
0.9 dB
1 PK
VIEW
-10
dBm
GHz
dBm
GHz
LVL
D1 -18.38 dBm
-20
-30
-40
3DB
-50
-60
-70
-80
-90
Center
2.402 GHz
200 kHz/
Span
2 MHz
20 dB Bandwidth_DH5_2441
* RBW 30 kHz
Marker 3 [T1 ]
-19.12 dBm
2.441422000 GHz
* VBW 100 kHz
Ref
10
* Att
10 dBm
Offset
10 dB
* SWT 20 ms
Marker 1 [T1 ]
0.98
2.440852000
Marker 2 [T1 ]
-19.04
2.440630000
0.9 dB
1 PK
VIEW
-10
-20
dBm
GHz
dBm
GHz
LVL
D1 -19.02 dBm
-30
-40
3DB
-50
-60
-70
-80
-90
Center
2.441 GHz
200 kHz/
Span
2 MHz
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM180800755201
Page:
50 of 94
20 dB Bandwidth_DH5_2480
* RBW 30 kHz
Marker 3 [T1 ]
-20.13 dBm
2.480424000 GHz
* VBW 100 kHz
Ref
10
* Att
10 dBm
Offset
10 dB
* SWT 20 ms
Marker 1 [T1 ]
0.23
2.479852000
Marker 2 [T1 ]
-19.89
2.479628000
0.9 dB
1 PK
VIEW
-10
dBm
GHz
dBm
GHz
LVL
D1 -19.77 dBm
-20
-30
-40
3DB
-50
-60
-70
-80
-90
Center
2.48 GHz
200 kHz/
Span
2 MHz
20 dB Bandwidth_2DH5_2402
* RBW 30 kHz
* VBW 100 kHz
Ref
10
* Att
10 dBm
Offset
10 dB
* SWT 20 ms
0.9 dB
1 PK
VIEW
-10
-20
D1 -19.39 dBm
Marker 3 [T1 ]
-19.64 dBm
2.402574000 GHz
Marker 1 [T1 ]
0.61
2.402180000
Marker 2 [T1 ]
-19.46
2.401474000
dBm
GHz
dBm
GHz
LVL
-30
-40
3DB
-50
-60
-70
-80
-90
Center
2.402 GHz
200 kHz/
Span
2 MHz
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM180800755201
Page:
51 of 94
20 dB Bandwidth_2DH5_2441
* RBW 30 kHz
* VBW 100 kHz
Ref
10
* Att
10 dBm
Offset
10 dB
* SWT 20 ms
0.9 dB
1 PK
VIEW
-10
D1 -20.88 dBm
-20
Marker 3 [T1 ]
-20.97 dBm
2.441568000 GHz
Marker 1 [T1 ]
-0.88
2.441180000
Marker 2 [T1 ]
-20.88
2.440478000
dBm
GHz
dBm
GHz
LVL
-30
-40
3DB
-50
-60
-70
-80
-90
Center
2.441 GHz
200 kHz/
Span
2 MHz
20 dB Bandwidth_2DH5_2480
* RBW 30 kHz
* VBW 100 kHz
Ref
10
* Att
10 dBm
Offset
10 dB
* SWT 20 ms
0.9 dB
1 PK
VIEW
-10
-20
Marker 3 [T1 ]
-21.52 dBm
2.480560000 GHz
Marker 1 [T1 ]
-1.51
2.480180000
Marker 2 [T1 ]
-21.78
2.479482000
dBm
GHz
dBm
GHz
LVL
D1 -21.51 dBm
-30
-40
3DB
-50
-60
-70
-80
-90
Center
2.48 GHz
200 kHz/
Span
2 MHz
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM180800755201
Page:
52 of 94
20 dB Bandwidth_3DH5_2402
* RBW 30 kHz
* VBW 100 kHz
Ref
10
* Att
10 dBm
Offset
10 dB
* SWT 20 ms
Marker 1 [T1 ]
-0.67
2.401852000
Marker 2 [T1 ]
-20.67
2.401472000
0.9 dB
1 PK
VIEW
-10
D1 -20.67 dBm
-20
Marker 3 [T1 ]
-20.68 dBm
2.402546000 GHz
dBm
GHz
dBm
GHz
LVL
-30
-40
3DB
-50
-60
-70
-80
-90
Center
2.402 GHz
200 kHz/
Span
2 MHz
20 dB Bandwidth_3DH5_2441
* RBW 30 kHz
* VBW 100 kHz
Ref
10
* Att
10 dBm
Offset
10 dB
* SWT 20 ms
Marker 1 [T1 ]
-1.00
2.440852000
Marker 2 [T1 ]
-21.06
2.440470000
0.9 dB
1 PK
VIEW
-10
-20
Marker 3 [T1 ]
-21.13 dBm
2.441542000 GHz
dBm
GHz
dBm
GHz
LVL
D1 -21 dBm
-30
-40
3DB
-50
-60
-70
-80
-90
Center
2.441 GHz
200 kHz/
Span
2 MHz
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM180800755201
Page:
53 of 94
20 dB Bandwidth_3DH5_2480
* RBW 30 kHz
* VBW 100 kHz
Ref
10
* Att
10 dBm
Offset
* SWT 20 ms
Marker 1 [T1 ]
-1.88
2.479852000
Marker 2 [T1 ]
-22.02
2.479470000
0.9 dB
1 PK
VIEW
10 dB
-10
-20
Marker 3 [T1 ]
-21.93 dBm
2.480538000 GHz
dBm
GHz
dBm
GHz
LVL
D1 -21.88 dBm
-30
-40
3DB
-50
-60
-70
-80
-90
Center
2.48 GHz
200 kHz/
Span
2 MHz
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM180800755201
Page:
54 of 94
2.Conducted Peak Output Power
Test Mode
Test Channel
Power[dBm]
Limit[dBm]
Verdict
DH5
2402
2.4
<=20.97
PASS
DH5
2441
1.74
<=20.97
PASS
DH5
2480
1.47
<=20.97
PASS
2DH5
2402
2.33
<=20.97
PASS
2DH5
2441
1.95
<=20.97
PASS
2DH5
2480
1.24
<=20.97
PASS
3DH5
2402
2.28
<=20.97
PASS
3DH5
2441
1.96
<=20.97
PASS
3DH5
2480
1.46
<=20.97
PASS
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM180800755201
Page:
55 of 94
Conducted Peak Output Power_DH5_2402
* RBW 3 MHz
* VBW 10 MHz
Ref
10
* Att
10 dBm
Offset
* SWT 20 ms
10 dB
Marker 1 [T1 ]
2.40 dBm
2.401950000 GHz
0.9 dB
1 PK
VIEW
-10
LVL
-20
-30
-40
3DB
-50
-60
-70
-80
-90
Center
2.402 GHz
2.5 MHz/
Span
25 MHz
Conducted Peak Output Power_DH5_2441
* RBW 3 MHz
* VBW 10 MHz
Ref
10
* Att
10 dBm
Offset
* SWT 20 ms
10 dB
Marker 1 [T1 ]
1.74 dBm
2.440850000 GHz
0.9 dB
1 PK
VIEW
-10
LVL
-20
-30
-40
3DB
-50
-60
-70
-80
-90
Center
2.441 GHz
2.5 MHz/
Span
25 MHz
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM180800755201
Page:
56 of 94
Conducted Peak Output Power_DH5_2480
* RBW 3 MHz
* VBW 10 MHz
Ref
10
* Att
10 dBm
Offset
* SWT 20 ms
10 dB
Marker 1 [T1 ]
1.47 dBm
2.479725000 GHz
0.9 dB
1 PK
VIEW
-10
LVL
-20
-30
-40
3DB
-50
-60
-70
-80
-90
Center
2.48 GHz
2.5 MHz/
Span
25 MHz
Conducted Peak Output Power_2DH5_2402
* RBW 3 MHz
* VBW 10 MHz
Ref
10
* Att
10 dBm
Offset
* SWT 20 ms
10 dB
Marker 1 [T1 ]
2.33 dBm
2.401825000 GHz
0.9 dB
1 PK
VIEW
-10
LVL
-20
-30
-40
3DB
-50
-60
-70
-80
-90
Center
2.402 GHz
2.5 MHz/
Span
25 MHz
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM180800755201
Page:
57 of 94
Conducted Peak Output Power_2DH5_2441
* RBW 3 MHz
* VBW 10 MHz
Ref
10
* Att
10 dBm
Offset
* SWT 20 ms
10 dB
Marker 1 [T1 ]
1.95 dBm
2.440800000 GHz
0.9 dB
1 PK
VIEW
-10
LVL
-20
-30
-40
3DB
-50
-60
-70
-80
-90
Center
2.441 GHz
2.5 MHz/
Span
25 MHz
Conducted Peak Output Power_2DH5_2480
* RBW 3 MHz
* VBW 10 MHz
Ref
10
* Att
10 dBm
Offset
* SWT 20 ms
10 dB
Marker 1 [T1 ]
1.24 dBm
2.480025000 GHz
0.9 dB
1 PK
VIEW
-10
LVL
-20
-30
-40
3DB
-50
-60
-70
-80
-90
Center
2.48 GHz
2.5 MHz/
Span
25 MHz
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM180800755201
Page:
58 of 94
Conducted Peak Output Power_3DH5_2402
* RBW 3 MHz
* VBW 10 MHz
Ref
10
* Att
10 dBm
Offset
* SWT 20 ms
10 dB
Marker 1 [T1 ]
2.28 dBm
2.401925000 GHz
0.9 dB
1 PK
VIEW
-10
LVL
-20
-30
-40
3DB
-50
-60
-70
-80
-90
Center
2.402 GHz
2.5 MHz/
Span
25 MHz
Conducted Peak Output Power_3DH5_2441
* RBW 3 MHz
* VBW 10 MHz
Ref
10
* Att
10 dBm
Offset
* SWT 20 ms
10 dB
Marker 1 [T1 ]
1.96 dBm
2.440825000 GHz
0.9 dB
1 PK
VIEW
-10
LVL
-20
-30
-40
3DB
-50
-60
-70
-80
-90
Center
2.441 GHz
2.5 MHz/
Span
25 MHz
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM180800755201
Page:
59 of 94
Conducted Peak Output Power_3DH5_2480
* RBW 3 MHz
* VBW 10 MHz
Ref
10
* Att
10 dBm
Offset
* SWT 20 ms
10 dB
Marker 1 [T1 ]
1.46 dBm
2.479950000 GHz
0.9 dB
1 PK
VIEW
-10
LVL
-20
-30
-40
3DB
-50
-60
-70
-80
-90
Center
2.48 GHz
2.5 MHz/
Span
25 MHz
3.Carrier Frequency Separation
Test Mode
Test Channel
Result[MHz]
Limit[MHz]
Verdict
DH5
2441
1.002
>=0.53
PASS
2DH5
2441
1.011
>=0.73
PASS
3DH5
2441
1.014
>=0.72
PASS
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM180800755201
Page:
60 of 94
Carrier Frequency Separation_DH5_2441
* RBW 300 kHz
* VBW 1 MHz
Ref
10
* Att
10 dBm
Offset
0.9 dB
10 dB
SWT 5 ms
1 PK
VIEW
Delta 1 [T1 ]
-0.02 dB
1.002000000 MHz
Marker 1 [T1 ]
2.72 dBm
2.440858000 GHz
-10
LVL
-20
-30
-40
3DB
-50
-60
-70
-80
-90
Start
2.44 GHz
300 kHz/
Stop
2.443 GHz
Carrier Frequency Separation_2DH5_2441
* RBW 300 kHz
* VBW 1 MHz
Ref
10
* Att
10 dBm
Offset
0.9 dB
10 dB
SWT 5 ms
1 PK
VIEW
Delta 1 [T1 ]
-0.03 dB
1.011000000 MHz
Marker 1 [T1 ]
2.98 dBm
2.440855000 GHz
-10
LVL
-20
-30
-40
3DB
-50
-60
-70
-80
-90
Start
2.44 GHz
300 kHz/
Stop
2.443 GHz
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM180800755201
Page:
61 of 94
Carrier Frequency Separation_3DH5_2441
* RBW 300 kHz
* VBW 1 MHz
Ref
10
* Att
10 dBm
Offset
0.9 dB
10 dB
SWT 5 ms
1 PK
VIEW
Delta 1 [T1 ]
-0.03 dB
1.014000000 MHz
Marker 1 [T1 ]
2.99 dBm
2.440852000 GHz
-10
LVL
-20
-30
-40
3DB
-50
-60
-70
-80
-90
Start
2.44 GHz
300 kHz/
Stop
2.443 GHz
4.Dwell Time
Test
Mode
Test
Channel
Burst
Width[ms/hop/ch]
Total
Hops[hop*ch]
Dwell
Time[s]
DH1
2402
0.41
320
0.131
<0.4
PASS
DH3
2402
1.68
160
0.269
<0.4
PASS
DH5
2402
2.92
110
0.321
<0.4
PASS
2DH1
2402
0.41
320
0.131
<0.4
PASS
2DH3
2402
1.67
160
0.267
<0.4
PASS
2DH5
2402
2.92
110
0.321
<0.4
PASS
3DH1
2402
0.4
320
0.128
<0.4
PASS
3DH3
2402
1.67
160
0.267
<0.4
PASS
3DH5
2402
2.91
110
0.32
<0.4
PASS
Limit[s] Verdict
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM180800755201
Page:
62 of 94
Dwell Time_DH1_2402
RBW 1 MHz
* VBW 3 MHz
Ref
* Att
10 dBm
10
10 dB
SWT 3 ms
Marker 1 [T1 ]
3.03 dBm
-3.000000 µs
TRG -3 dBm
1 PK *
VIEW
Delta 1 [T1 ]
-0.71 dB
405.000000 µs
SGL
TRG
-10
-20
-30
-40
3DB
-50
-60
-70
-80
-90
Center 2.402 GHz
300 µs/
RBW 1 MHz
* VBW 3 MHz
Ref
10 dBm
* Att
10 dB
SWT 3.16 s
10
SGL
1 PK *
CLRWR
-10
-20
-30
-40
3DB
-50
-60
-70
-80
-90
Center 2.402 GHz
316 ms/
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM180800755201
Page:
63 of 94
Dwell Time_DH3_2402
RBW 1 MHz
* VBW 3 MHz
Ref
* Att
10 dBm
10
10 dB
SWT 5 ms
TRG -3 dBm
1 PK *
VIEW
Delta 1 [T1 ]
-0.49 dB
1.675000 ms
Marker 1 [T1 ]
2.75 dBm
10.000000 µs
SGL
TRG
-10
-20
-30
-40
3DB
-50
-60
-70
-80
-90
Center 2.402 GHz
500 µs/
RBW 1 MHz
* VBW 3 MHz
Ref
10 dBm
* Att
10 dB
SWT 3.16 s
10
SGL
1 PK *
CLRWR
-10
-20
-30
-40
3DB
-50
-60
-70
-80
-90
Center 2.402 GHz
316 ms/
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM180800755201
Page:
64 of 94
Dwell Time_DH5_2402
RBW 1 MHz
* VBW 3 MHz
Ref
* Att
10 dBm
10
10 dB
SWT 8 ms
TRG -3 dBm
1 PK *
VIEW
Delta 1 [T1 ]
-0.49 dB
2.920000 ms
Marker 1 [T1 ]
2.65 dBm
8.000000 µs
SGL
TRG
-10
-20
-30
-40
3DB
-50
-60
-70
-80
-90
Center 2.402 GHz
800 µs/
RBW 1 MHz
* VBW 3 MHz
Ref
10 dBm
* Att
10 dB
SWT 3.16 s
10
SGL
1 PK *
CLRWR
-10
-20
-30
-40
3DB
-50
-60
-70
-80
-90
Center 2.402 GHz
316 ms/
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM180800755201
Page:
65 of 94
Dwell Time_2DH1_2402
RBW 1 MHz
* VBW 3 MHz
Ref
* Att
10 dBm
10
10 dB
SWT 3 ms
Marker 1 [T1 ]
2.77 dBm
0.000000 s
TRG -3.2 dBm
1 PK *
VIEW
Delta 1 [T1 ]
-5.24 dB
405.000000 µs
SGL
TRG
-10
-20
-30
-40
3DB
-50
-60
-70
-80
-90
Center 2.402 GHz
300 µs/
RBW 1 MHz
* VBW 3 MHz
Ref
10 dBm
* Att
10 dB
SWT 3.16 s
10
SGL
1 PK *
CLRWR
-10
-20
-30
-40
3DB
-50
-60
-70
-80
-90
Center 2.402 GHz
316 ms/
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM180800755201
Page:
66 of 94
Dwell Time_2DH3_2402
RBW 1 MHz
* VBW 3 MHz
Ref
* Att
10 dBm
10
10 dB
SWT 5 ms
TRG -3.2 dBm
1 PK *
VIEW
Delta 1 [T1 ]
-5.00 dB
1.670000 ms
Marker 1 [T1 ]
2.59 dBm
10.000000 µs
SGL
TRG
-10
-20
-30
-40
3DB
-50
-60
-70
-80
-90
Center 2.402 GHz
500 µs/
RBW 1 MHz
* VBW 3 MHz
Ref
10 dBm
* Att
10 dB
SWT 3.16 s
10
SGL
1 PK *
CLRWR
-10
-20
-30
-40
3DB
-50
-60
-70
-80
-90
Center 2.402 GHz
316 ms/
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM180800755201
Page:
67 of 94
Dwell Time_2DH5_2402
RBW 1 MHz
* VBW 3 MHz
Ref
* Att
10 dBm
10
10 dB
SWT 8 ms
TRG -3.1 dBm
1 PK *
VIEW
Delta 1 [T1 ]
-5.02 dB
2.920000 ms
Marker 1 [T1 ]
2.63 dBm
8.000000 µs
SGL
TRG
-10
-20
-30
-40
3DB
-50
-60
-70
-80
-90
Center 2.402 GHz
800 µs/
RBW 1 MHz
* VBW 3 MHz
Ref
10 dBm
* Att
10 dB
SWT 3.16 s
10
SGL
1 PK *
CLRWR
-10
-20
-30
-40
3DB
-50
-60
-70
-80
-90
Center 2.402 GHz
316 ms/
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM180800755201
Page:
68 of 94
Dwell Time_3DH1_2402
RBW 1 MHz
* VBW 3 MHz
Ref
* Att
10 dBm
10
10 dB
SWT 3 ms
Marker 1 [T1 ]
3.14 dBm
0.000000 s
TRG -2.8 dBm
1 PK *
VIEW
Delta 1 [T1 ]
-4.78 dB
402.000000 µs
SGL
TRG
-10
-20
-30
-40
3DB
-50
-60
-70
-80
-90
Center 2.402 GHz
300 µs/
RBW 1 MHz
* VBW 3 MHz
Ref
10 dBm
* Att
10 dB
SWT 3.16 s
10
SGL
1 PK *
CLRWR
-10
-20
-30
-40
3DB
-50
-60
-70
-80
-90
Center 2.402 GHz
316 ms/
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM180800755201
Page:
69 of 94
Dwell Time_3DH3_2402
RBW 1 MHz
* VBW 3 MHz
Ref
* Att
10 dBm
10
10 dB
SWT 5 ms
TRG -2.9 dBm
1 PK *
VIEW
Delta 1 [T1 ]
-4.78 dB
1.670000 ms
Marker 1 [T1 ]
3.11 dBm
10.000000 µs
SGL
TRG
-10
-20
-30
-40
3DB
-50
-60
-70
-80
-90
Center 2.402 GHz
500 µs/
RBW 1 MHz
* VBW 3 MHz
Ref
10 dBm
* Att
10 dB
SWT 3.16 s
10
SGL
1 PK *
CLRWR
-10
-20
-30
-40
3DB
-50
-60
-70
-80
-90
Center 2.402 GHz
316 ms/
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM180800755201
Page:
70 of 94
Dwell Time_3DH5_2402
RBW 1 MHz
* VBW 3 MHz
Ref
* Att
10 dBm
10
10 dB
SWT 8 ms
TRG -2.9 dBm
1 PK *
VIEW
Delta 1 [T1 ]
-4.54 dB
2.912000 ms
Marker 1 [T1 ]
2.82 dBm
8.000000 µs
SGL
TRG
-10
-20
-30
-40
3DB
-50
-60
-70
-80
-90
Center 2.402 GHz
800 µs/
RBW 1 MHz
* VBW 3 MHz
Ref
10 dBm
* Att
10 dB
SWT 3.16 s
10
SGL
1 PK *
CLRWR
-10
-20
-30
-40
3DB
-50
-60
-70
-80
-90
Center 2.402 GHz
316 ms/
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM180800755201
Page:
71 of 94
5.Hopping Channel Number
Test Mode
Test Channel
Number of Hopping Channel[N]
Limit[N] Verdict
DH5
2402
79
>=15
PASS
2DH5
2402
79
>=15
PASS
3DH5
2402
79
>=15
PASS
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM180800755201
Page:
72 of 94
Hopping Channel Number_DH5_2402
* RBW 300 kHz
* VBW 1 MHz
Ref
10
* Att
10 dBm
Offset
10 dB
SWT 5 ms
Marker 1 [T1 ]
3.17 1dBm
2.402171000 GHz
0.9 dB
1 PK
VIEW
Delta 1 [T1 ]
-1.88 dB
77.738500000 MHz
-10
LVL
-20
-30
-40
3DB
-50
-60
-70
-80
-90
Start
2.4 GHz
8.35 MHz/
Stop
2.4835 GHz
Hopping Channel Number_2DH5_2402
* RBW 300 kHz
* VBW 1 MHz
Ref
10
* Att
10 dBm
Offset
10 dB
SWT 5 ms
Marker 1 [T1 ]
3.31 1dBm
2.401920500 GHz
0.9 dB
1 PK
VIEW
Delta 1 [T1 ]
-1.77 dB
77.989000000 MHz
-10
LVL
-20
-30
-40
3DB
-50
-60
-70
-80
-90
Start
2.4 GHz
8.35 MHz/
Stop
2.4835 GHz
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM180800755201
Page:
73 of 94
Hopping Channel Number_3DH5_2402
* RBW 300 kHz
* VBW 1 MHz
Ref
10
* Att
10 dBm
Offset
10 dB
SWT 5 ms
Marker 1 [T1 ]
3.92 1dBm
2.401837000 GHz
0.9 dB
1 PK
VIEW
Delta 1 [T1 ]
-2.38 dB
78.072500000 MHz
-10
LVL
-20
-30
-40
3DB
-50
-60
-70
-80
-90
Start
2.4 GHz
8.35 MHz/
Stop
2.4835 GHz
6.Band-edge for RF Conducted Emissions
Test
Mode
Test
Channel
Hopping
Carrier
Power[dBm]
Max. Spurious Level
[dBm]
DH5
2402
On
3.150
-56.582
<-16.85
PASS
DH5
2402
Off
1.660
-56.284
<-18.34
PASS
DH5
2480
On
1.280
-58.830
<-18.72
PASS
DH5
2480
Off
0.370
-59.420
<-19.63
PASS
2DH5
2402
On
3.030
-56.914
<-16.97
PASS
2DH5
2402
Off
1.650
-56.122
<-18.35
PASS
2DH5
2480
On
1.010
-57.332
<-18.99
PASS
2DH5
2480
Off
0.490
-59.322
<-19.51
PASS
3DH5
2402
On
3.250
-55.629
<-16.75
PASS
3DH5
2402
Off
1.470
-55.682
<-18.53
PASS
3DH5
2480
On
1.320
-55.682
<-18.68
PASS
3DH5
2480
Off
0.450
-52.598
<-19.55
PASS
Limit[dBm] Verdict
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM180800755201
Page:
74 of 94
Band-edge for RF Conducted Emissions_DH5_2402_Hopping On
* RBW 100 kHz
* VBW 300 kHz
Ref
10
* Att
10 dBm
Offset
10 dB
SWT 10 ms
Marker 1 [T1 ]
3.15
2.404272000
Marker 2 [T1 ]
-51.18
2.400000000
Marker 3 [T1 ]
-64.23
2.390000000
0.9 dB
1 PK
VIEW
Marker 4 [T1 ]
-56.58 dBm
2.389200000 GHz
-10
D1 -16.85 dBm
-20
dBm
GHz
dBm
GHz
LVL
dBm
GHz
-30
-40
3DB
-50
-60
-70
-80
-90
Start
2.31 GHz
9.6 MHz/
Stop
2.406 GHz
Band-edge for RF Conducted Emissions_DH5_2402_Hopping Off
* RBW 100 kHz
* VBW 300 kHz
Ref
10
* Att
10 dBm
Offset
10 dB
* SWT 20 ms
Marker 1 [T1 ]
1.66
2.401872000
Marker 2 [T1 ]
-45.13
2.400000000
Marker 3 [T1 ]
-56.35
2.390000000
0.9 dB
1 PK
VIEW
-10
-20
Marker 4 [T1 ]
-56.28 dBm
2.389872000 GHz
D1 -18.34 dBm
1dBm
GHz
dBm
GHz
LVL
dBm
GHz
-30
-40
3DB
-50
-60
-70
-80
-90
Start
2.31 GHz
9.6 MHz/
Stop
2.406 GHz
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM180800755201
Page:
75 of 94
Band-edge for RF Conducted Emissions_DH5_2480_Hopping On
* RBW 100 kHz
* VBW 300 kHz
Ref
10
* Att
10 dBm
Offset
10 dB
SWT 10 ms
Marker 1 [T1 ]
1.28
2.476168000
Marker 2 [T1 ]
-61.43
2.483500000
Marker 3 [T1 ]
-66.51
2.500000000
0.9 dB
1 PK
VIEW
-10
D1 -18.72 dBm
-20
Marker 4 [T1 ]
-58.83 dBm
2.484376000 GHz
dBm
GHz
dBm
GHz
LVL
dBm
GHz
-30
-40
3DB
-50
-60
-70
-80
-90
Start
2.476 GHz
2.4 MHz/
Stop
2.5 GHz
Band-edge for RF Conducted Emissions_DH5_2480_Hopping Off
* RBW 100 kHz
* VBW 300 kHz
Ref
10
* Att
10 dBm
Offset
10 dB
* SWT 20 ms
Marker 1 [T1 ]
0.37
2.479840000
Marker 2 [T1 ]
-59.98
2.483500000
Marker 3 [T1 ]
-66.17
2.500000000
0.9 dB
1 PK
VIEW
-10
-20
Marker 4 [T1 ]
-59.42 dBm
2.483800000 GHz
D1 -19.63 dBm
dBm
GHz
dBm
GHz
LVL
dBm
GHz
-30
-40
3DB
-50
24
-60
-70
-80
-90
Start
2.476 GHz
2.4 MHz/
Stop
2.5 GHz
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM180800755201
Page:
76 of 94
Band-edge for RF Conducted Emissions_2DH5_2402_Hopping On
* RBW 100 kHz
* VBW 300 kHz
Ref
10
* Att
10 dBm
Offset
10 dB
SWT 10 ms
Marker 1 [T1 ]
3.03
2.403984000
Marker 2 [T1 ]
-36.36
2.400000000
Marker 3 [T1 ]
-63.11
2.390000000
0.9 dB
1 PK
VIEW
Marker 4 [T1 ]
-56.91 dBm
2.389008000 GHz
-10
D1 -16.97 dBm
-20
dBm
GHz
dBm
GHz
LVL
dBm
GHz
-30
-40
3DB
-50
-60
-70
-80
-90
Start
2.31 GHz
9.6 MHz/
Stop
2.406 GHz
Band-edge for RF Conducted Emissions_2DH5_2402_Hopping Off
* RBW 100 kHz
* VBW 300 kHz
Ref
10
* Att
10 dBm
Offset
10 dB
* SWT 20 ms
Marker 1 [T1 ]
1.65
2.402256000
Marker 2 [T1 ]
-42.10
2.400000000
Marker 3 [T1 ]
-56.13
2.390000000
0.9 dB
1 PK
VIEW
-10
-20
Marker 4 [T1 ]
-56.12 dBm
2.389584000 GHz
D1 -18.35 dBm
dBm
GHz
dBm
GHz
LVL
dBm
GHz
-30
-40
3DB
-50
43
-60
-70
-80
-90
Start
2.31 GHz
9.6 MHz/
Stop
2.406 GHz
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM180800755201
Page:
77 of 94
Band-edge for RF Conducted Emissions_2DH5_2480_Hopping On
* RBW 100 kHz
* VBW 300 kHz
Ref
10
* Att
10 dBm
Offset
10 dB
SWT 10 ms
Marker 1 [T1 ]
1.01
2.479840000
Marker 2 [T1 ]
-64.58
2.483500000
Marker 3 [T1 ]
-63.99
2.500000000
0.9 dB
1 PK
VIEW
-10
D1 -18.99 dBm
-20
Marker 4 [T1 ]
-57.33 dBm
2.483944000 GHz
dBm
GHz
dBm
GHz
LVL
dBm
GHz
-30
-40
3DB
-50
-60
-70
-80
-90
Start
2.476 GHz
2.4 MHz/
Stop
2.5 GHz
Band-edge for RF Conducted Emissions_2DH5_2480_Hopping Off
* RBW 100 kHz
* VBW 300 kHz
Ref
10
* Att
10 dBm
Offset
10 dB
* SWT 20 ms
Marker 1 [T1 ]
0.49
2.480176000
Marker 2 [T1 ]
-59.40
2.483500000
Marker 3 [T1 ]
-67.20
2.500000000
0.9 dB
1 PK
VIEW
-10
-20
Marker 4 [T1 ]
-59.32 dBm
2.483584000 GHz
D1 -19.51 dBm
dBm
GHz
dBm
GHz
LVL
dBm
GHz
-30
-40
3DB
-50
-60
-70
-80
-90
Start
2.476 GHz
2.4 MHz/
Stop
2.5 GHz
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM180800755201
Page:
78 of 94
Band-edge for RF Conducted Emissions_3DH5_2402_Hopping On
* RBW 100 kHz
* VBW 300 kHz
Ref
10
* Att
10 dBm
Offset
10 dB
SWT 10 ms
Marker 1 [T1 ]
3.25
2.405136000
Marker 2 [T1 ]
-36.54
2.400000000
Marker 3 [T1 ]
-60.44
2.390000000
0.9 dB
1 PK
VIEW
Marker 4 [T1 ]
-55.63 dBm
2.389776000 GHz
-10
D1 -16.75 dBm
-20
dBm
GHz
dBm
GHz
LVL
dBm
GHz
-30
-40
3DB
-50
-60
-70
-80
-90
Start
2.31 GHz
9.6 MHz/
Stop
2.406 GHz
Band-edge for RF Conducted Emissions_3DH5_2402_Hopping Off
* RBW 100 kHz
* VBW 300 kHz
Ref
10
* Att
10 dBm
Offset
10 dB
* SWT 20 ms
Marker 1 [T1 ]
1.47
2.401872000
Marker 2 [T1 ]
-40.29
2.400000000
Marker 3 [T1 ]
-56.39
2.390000000
0.9 dB
1 PK
VIEW
-10
-20
Marker 4 [T1 ]
-55.68 dBm
2.389680000 GHz
D1 -18.53 dBm
1dBm
GHz
dBm
GHz
LVL
dBm
GHz
-30
-40
3DB
-50
-60
-70
-80
-90
Start
2.31 GHz
9.6 MHz/
Stop
2.406 GHz
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM180800755201
Page:
79 of 94
Band-edge for RF Conducted Emissions_3DH5_2480_Hopping On
* RBW 100 kHz
* VBW 300 kHz
Ref
10
* Att
10 dBm
Offset
10 dB
SWT 10 ms
Marker 1 [T1 ]
1.32
2.476840000
Marker 2 [T1 ]
-55.68
2.483500000
Marker 3 [T1 ]
-65.84
2.500000000
0.9 dB
1 PK
VIEW
-10
D1 -18.68 dBm
-20
Marker 4 [T1 ]
-55.68 dBm
2.483512000 GHz
dBm
GHz
dBm
GHz
LVL
dBm
GHz
-30
-40
3DB
-50
-60
-70
-80
-90
Start
2.476 GHz
2.4 MHz/
Stop
2.5 GHz
Band-edge for RF Conducted Emissions_3DH5_2480_Hopping Off
* RBW 100 kHz
* VBW 300 kHz
Ref
10
* Att
10 dBm
Offset
10 dB
* SWT 20 ms
Marker 1 [T1 ]
0.45
2.479840000
Marker 2 [T1 ]
-52.60
2.483500000
Marker 3 [T1 ]
-66.53
2.500000000
0.9 dB
1 PK
VIEW
-10
-20
Marker 4 [T1 ]
-52.60 dBm
2.483512000 GHz
D1 -19.55 dBm
dBm
GHz
dBm
GHz
LVL
dBm
GHz
-30
-40
3DB
-50
-60
-70
-80
-90
Start
2.476 GHz
2.4 MHz/
Stop
2.5 GHz
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM180800755201
Page:
80 of 94
8.RF Conducted Spurious Emissions
RBW
[kHz]
VBW
[kHz]
Pref[dBm]
Max.
Level
[dBm]
10000
1000
3000
1.66
-22.950
<18.34
PASS
10000
25000
1000
3000
1.66
-65.170
<18.34
PASS
2441
30
10000
1000
3000
1.12
-28.150
<18.88
PASS
DH5
2441
10000
25000
1000
3000
1.12
-63.380
<18.88
PASS
DH5
2480
30
10000
1000
3000
0.36
-31.030
<19.64
PASS
DH5
2480
10000
25000
1000
3000
0.36
-64.840
<19.64
PASS
2DH5
2402
30
10000
1000
3000
1.56
-22.420
<18.44
PASS
2DH5
2402
10000
25000
1000
3000
1.56
-64.810
<18.44
PASS
2DH5
2441
30
10000
1000
3000
1.33
-27.670
<18.67
PASS
2DH5
2441
10000
25000
1000
3000
1.33
-65.130
<18.67
PASS
2DH5
2480
30
10000
1000
3000
0.28
-31.240
<19.72
PASS
2DH5
2480
10000
25000
1000
3000
0.28
-64.080
<19.72
PASS
3DH5
2402
30
10000
1000
3000
1.51
-22.150
<18.49
PASS
3DH5
2402
10000
25000
1000
3000
1.51
-64.160
<18.49
PASS
3DH5
2441
30
10000
1000
3000
1.28
-27.610
<18.72
PASS
3DH5
2441
10000
25000
1000
3000
1.28
-64.370
<18.72
PASS
3DH5
2480
30
10000
1000
3000
0.45
-34.780
<19.55
PASS
3DH5
2480
10000
25000
1000
3000
0.45
-64.830
<19.55
PASS
Test Mode
Test
Channel
StartFre StopFre
[MHz]
[MHz]
DH5
2402
30
DH5
2402
DH5
Limit
Verdict
[dBm]
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM180800755201
Page:
81 of 94
RF Conducted Spurious Emissions_DH5_2402
* RBW
100 kHz
Marker 1 [T1 ]
1.66 dBm
2.401800000 GHz
* VBW
Ref
10
10 dBm
Offset
* Att
10 dB
300 kHz
* SWT 20 ms
0.9 dB
1 PK
VIEW
-10
LVL
D2 -18.34 dBm
-20
-30
Pref
-40
3DB
-50
-60
-70
-80
-90
Start
2.4 GHz
10 MHz/
* RBW
Stop
1 MHz
Marker 2 [T1 ]
-22.95 dBm
7.205907500 GHz
* VBW
Ref
10
10 dBm
Offset
* Att
10 dB
3 MHz
SWT 60 ms
Marker 1 [T1 ]
2.00 dBm
2.401613750 GHz
0.9 dB
1 PK
VIEW
2.5 GHz
-10
-20
LVL
D2 -18.34 dBm
-30
CSE_1
-40
3DB
-50
-60
-70
-80
-90
Start
30 MHz
997 MHz/
Stop
10 GHz
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM180800755201
Page:
82 of 94
* RBW
1 MHz
* VBW
Ref
10
10 dBm
Offset
* Att
10 dB
3 MHz
SWT 90 ms
Marker 1 [T1 ]
-65.17 dBm
24.700000000 GHz
0.9 dB
1 PK
VIEW
-10
LVL
D2 -18.34 dBm
-20
-30
CSE_2
-40
3DB
-50
-60
-70
-80
-90
Start
10 GHz
1.5 GHz/
Stop
25 GHz
RF Conducted Spurious Emissions_DH5_2441
* RBW
* VBW
Ref
10
10 dBm
Offset
* Att
10 dB
100 kHz
300 kHz
* SWT 20 ms
Marker 1 [T1 ]
1.12 dBm
2.440800000 GHz
0.9 dB
1 PK
VIEW
-10
-20
LVL
D2 -18.88 dBm
-30
Pref
-40
3DB
-50
-60
-70
-80
-90
Start
2.4 GHz
10 MHz/
Stop
2.5 GHz
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM180800755201
Page:
83 of 94
* RBW
1 MHz
Marker 2 [T1 ]
-28.15 dBm
7.323055000 GHz
* VBW
Ref
10
10 dBm
Offset
* Att
10 dB
3 MHz
SWT 60 ms
Marker 1 [T1 ]
1.47 dBm
2.441493750 GHz
0.9 dB
1 PK
VIEW
-10
LVL
D2 -18.88 dBm
-20
-30
CSE_1
-40
3DB
-50
-60
-70
-80
-90
Start
30 MHz
997 MHz/
* RBW
Stop
1 MHz
* VBW
Ref
10
10 dBm
Offset
* Att
10 dB
3 MHz
SWT 90 ms
10 GHz
Marker 1 [T1 ]
-63.38 dBm
12.205000000 GHz
0.9 dB
1 PK
VIEW
-10
-20
LVL
D2 -18.88 dBm
-30
CSE_2
-40
3DB
-50
-60
-70
-80
-90
Start
10 GHz
1.5 GHz/
Stop
25 GHz
RF Conducted Spurious Emissions_DH5_2480
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM180800755201
Page:
84 of 94
* RBW
100 kHz
* VBW
Ref
10
10 dBm
Offset
* Att
300 kHz
* SWT 20 ms
10 dB
Marker 1 [T1 ]
0.36 dBm
2.479900000 GHz
0.9 dB
1 PK
VIEW
-10
LVL
D2 -19.64 dBm
-20
-30
Pref
-40
3DB
-50
-60
-70
-80
-90
Start
2.4 GHz
10 MHz/
* RBW
* VBW
Ref
10
10 dBm
Offset
* Att
1 MHz
3 MHz
SWT 60 ms
10 dB
2.5 GHz
Marker 2 [T1 ]
-31.03 dBm
4.960165000 GHz
Marker 1 [T1 ]
0.78 dBm
2.480127500 GHz
0.9 dB
1 PK
VIEW
Stop
-10
-20
LVL
D2 -19.64 dBm
-30
CSE_1
-40
3DB
-50
-60
-70
-80
-90
Start
30 MHz
997 MHz/
Stop
10 GHz
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM180800755201
Page:
85 of 94
* RBW
1 MHz
* VBW
Ref
10
10 dBm
Offset
* Att
10 dB
3 MHz
SWT 90 ms
Marker 1 [T1 ]
-64.84 dBm
22.232500000 GHz
0.9 dB
1 PK
VIEW
-10
LVL
D2 -19.64 dBm
-20
-30
CSE_2
-40
3DB
-50
-60
-70
-80
-90
Start
10 GHz
1.5 GHz/
Stop
25 GHz
RF Conducted Spurious Emissions_2DH5_2402
* RBW
* VBW
Ref
10
10 dBm
Offset
* Att
10 dB
100 kHz
300 kHz
* SWT 20 ms
Marker 1 [T1 ]
1.56 dBm
2.401800000 GHz
0.9 dB
1 PK
VIEW
-10
-20
LVL
D2 -18.44 dBm
-30
Pref
-40
3DB
-50
-60
-70
-80
-90
Start
2.4 GHz
10 MHz/
Stop
2.5 GHz
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM180800755201
Page:
86 of 94
* RBW
1 MHz
Marker 2 [T1 ]
-22.42 dBm
7.207153750 GHz
* VBW
Ref
10
10 dBm
Offset
* Att
10 dB
3 MHz
SWT 60 ms
Marker 1 [T1 ]
1.96 dBm
2.401613750 GHz
0.9 dB
1 PK
VIEW
-10
LVL
D2 -18.44 dBm
-20
-30
CSE_1
-40
3DB
-50
-60
-70
-80
-90
Start
30 MHz
997 MHz/
* RBW
* VBW
Ref
10
10 dBm
Offset
* Att
10 dB
Stop
1 MHz
3 MHz
SWT 90 ms
10 GHz
Marker 1 [T1 ]
-64.81 dBm
22.886875000 GHz
0.9 dB
1 PK
VIEW
-10
-20
LVL
D2 -18.44 dBm
-30
-40
3DB
CSE_2
-50
-60
-70
-80
-90
Start
10 GHz
1.5 GHz/
Stop
25 GHz
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM180800755201
Page:
87 of 94
RF Conducted Spurious Emissions_2DH5_2441
* RBW
100 kHz
Marker 1 [T1 ]
1.33 dBm
2.441200000 GHz
* VBW
Ref
10
10 dBm
Offset
* Att
10 dB
300 kHz
* SWT 20 ms
0.9 dB
1 PK
VIEW
-10
LVL
D2 -18.67 dBm
-20
-30
Pref
-40
3DB
-50
-60
-70
-80
-90
Start
2.4 GHz
10 MHz/
* RBW
Stop
1 MHz
Marker 2 [T1 ]
-27.67 dBm
7.323055000 GHz
* VBW
Ref
10
10 dBm
Offset
* Att
10 dB
3 MHz
SWT 60 ms
Marker 1 [T1 ]
1.73 dBm
2.441493750 GHz
0.9 dB
1 PK
VIEW
2.5 GHz
-10
-20
LVL
D2 -18.67 dBm
-30
CSE_1
-40
3DB
-50
-60
-70
-80
-90
Start
30 MHz
997 MHz/
Stop
10 GHz
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM180800755201
Page:
88 of 94
* RBW
1 MHz
* VBW
Ref
10
10 dBm
Offset
* Att
10 dB
3 MHz
SWT 90 ms
Marker 1 [T1 ]
-65.13 dBm
23.477500000 GHz
0.9 dB
1 PK
VIEW
-10
LVL
D2 -18.67 dBm
-20
-30
CSE_2
-40
3DB
-50
-60
-70
-80
-90
Start
10 GHz
1.5 GHz/
Stop
25 GHz
RF Conducted Spurious Emissions_2DH5_2480
* RBW
* VBW
Ref
10
10 dBm
Offset
* Att
10 dB
100 kHz
300 kHz
* SWT 20 ms
Marker 1 [T1 ]
0.28 dBm
2.480200000 GHz
0.9 dB
1 PK
VIEW
-10
-20
LVL
D2 -19.72 dBm
-30
Pref
-40
3DB
-50
-60
-70
-80
-90
Start
2.4 GHz
10 MHz/
Stop
2.5 GHz
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM180800755201
Page:
89 of 94
* RBW
1 MHz
* VBW
Ref
10
10 dBm
Offset
* Att
3 MHz
SWT 60 ms
10 dB
Marker 1 [T1 ]
0.72 dBm
2.480127500 GHz
0.9 dB
1 PK
VIEW
Marker 2 [T1 ]
-31.24 dBm
4.960165000 GHz
-10
LVL
D2 -19.72 dBm
-20
-30
CSE_1
-40
3DB
-50
-60
-70
-80
-90
Start
30 MHz
997 MHz/
* RBW
* VBW
Ref
10
10 dBm
Offset
* Att
10 dB
Stop
1 MHz
3 MHz
SWT 90 ms
10 GHz
Marker 1 [T1 ]
-64.08 dBm
14.880625000 GHz
0.9 dB
1 PK
VIEW
-10
-20
LVL
D2 -19.72 dBm
-30
-40
3DB
CSE_2
-50
-60
-70
-80
-90
Start
10 GHz
1.5 GHz/
Stop
25 GHz
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM180800755201
Page:
90 of 94
RF Conducted Spurious Emissions_3DH5_2402
* RBW
100 kHz
Marker 1 [T1 ]
1.51 dBm
2.401800000 GHz
* VBW
Ref
10
10 dBm
Offset
* Att
10 dB
300 kHz
* SWT 20 ms
0.9 dB
1 PK
VIEW
-10
LVL
D2 -18.49 dBm
-20
-30
Pref
-40
3DB
-50
-60
-70
-80
-90
Start
2.4 GHz
10 MHz/
* RBW
Stop
1 MHz
Marker 2 [T1 ]
-22.15 dBm
7.205907500 GHz
* VBW
Ref
10
10 dBm
Offset
* Att
10 dB
3 MHz
SWT 60 ms
Marker 1 [T1 ]
1.83 dBm
2.401613750 GHz
0.9 dB
1 PK
VIEW
2.5 GHz
-10
-20
LVL
D2 -18.49 dBm
-30
CSE_1
-40
3DB
-50
-60
-70
-80
-90
Start
30 MHz
997 MHz/
Stop
10 GHz
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM180800755201
Page:
91 of 94
* RBW
1 MHz
* VBW
Ref
10
10 dBm
Offset
* Att
10 dB
3 MHz
SWT 90 ms
Marker 1 [T1 ]
-64.16 dBm
22.313125000 GHz
0.9 dB
1 PK
VIEW
-10
LVL
D2 -18.49 dBm
-20
-30
CSE_2
-40
3DB
-50
-60
-70
-80
-90
Start
10 GHz
1.5 GHz/
Stop
25 GHz
RF Conducted Spurious Emissions_3DH5_2441
* RBW
* VBW
Ref
10
10 dBm
Offset
* Att
10 dB
100 kHz
300 kHz
* SWT 20 ms
Marker 1 [T1 ]
1.28 dBm
2.440800000 GHz
0.9 dB
1 PK
VIEW
-10
-20
LVL
D2 -18.72 dBm
-30
Pref
-40
3DB
-50
-60
-70
-80
-90
Start
2.4 GHz
10 MHz/
Stop
2.5 GHz
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM180800755201
Page:
92 of 94
* RBW
1 MHz
* VBW
Ref
10
10 dBm
Offset
* Att
10 dB
3 MHz
SWT 60 ms
Marker 1 [T1 ]
1.66 dBm
2.441493750 GHz
0.9 dB
1 PK
VIEW
Marker 2 [T1 ]
-27.61 dBm
7.324301250 GHz
-10
LVL
D2 -18.72 dBm
-20
-30
CSE_1
-40
3DB
-50
-60
-70
-80
-90
Start
30 MHz
997 MHz/
* RBW
* VBW
Ref
10
10 dBm
Offset
* Att
10 dB
Stop
1 MHz
3 MHz
SWT 90 ms
10 GHz
Marker 1 [T1 ]
-64.37 dBm
22.911250000 GHz
0.9 dB
1 PK
VIEW
-10
-20
LVL
D2 -18.72 dBm
-30
-40
3DB
CSE_2
-50
-60
-70
-80
-90
Start
10 GHz
1.5 GHz/
Stop
25 GHz
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM180800755201
Page:
93 of 94
RF Conducted Spurious Emissions_3DH5_2480
* RBW
100 kHz
* VBW
Ref
10
10 dBm
Offset
* Att
10 dB
300 kHz
* SWT 20 ms
Marker 1 [T1 ]
0.45 dBm
2.479900000 GHz
0.9 dB
1 PK
VIEW
-10
LVL
D2 -19.55 dBm
-20
-30
Pref
-40
3DB
-50
-60
-70
-80
-90
Start
2.4 GHz
10 MHz/
* RBW
* VBW
Ref
10
10 dBm
Offset
* Att
10 dB
1 MHz
3 MHz
SWT 60 ms
2.5 GHz
Marker 2 [T1 ]
-34.78 dBm
7.440202500 GHz
Marker 1 [T1 ]
0.80 dBm
2.480127500 GHz
0.9 dB
1 PK
VIEW
Stop
-10
-20
LVL
D2 -19.55 dBm
-30
CSE_1
-40
3DB
-50
-60
-70
-80
-90
Start
30 MHz
997 MHz/
Stop
10 GHz
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
SGS-CSTC Standards Technical Services Co., Ltd.
Shenzhen Branch
Report No.: SZEM180800755201
Page:
94 of 94
* RBW
* VBW
Ref
10
10 dBm
Offset
* Att
1 MHz
3 MHz
SWT 90 ms
10 dB
Marker 1 [T1 ]
-64.83 dBm
24.017500000 GHz
0.9 dB
1 PK
VIEW
-10
-20
LVL
D2 -19.55 dBm
-30
CSE_2
-40
3DB
-50
-60
-70
-80
-90
Start
10 GHz
1.5 GHz/
Stop
25 GHz
- End of the Report -
This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at http://www.sgs.com/en/Terms-and-Conditions.aspx and, for
electronic format documents, subject to Terms and Conditions for Electronic Documents at http://www.sgs.com/en/Terms-and-Conditions/Terms-e-Document.aspx. Attention is drawn to the limitation of
liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention
only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and
obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test report refer only to the sample(s)
tested and such sample(s) are retained for 30 days only.
Download: CM00056 Switch Up Test Report SZEM180800755201 Collective Minds Gaming
Mirror Download [FCC.gov]CM00056 Switch Up Test Report SZEM180800755201 Collective Minds Gaming
Document ID3985758
Application IDCBANpKmGKIqdfxqjYVguKQ==
Document DescriptionTest Report
Short Term ConfidentialNo
Permanent ConfidentialNo
SupercedeNo
Document TypeTest Report
Display FormatAdobe Acrobat PDF - pdf
Filesize362.63kB (4532835 bits)
Date Submitted2018-08-31 00:00:00
Date Available2018-08-31 00:00:00
Creation Date2018-08-30 11:16:05
Producing SoftwareGPL Ghostscript 8.64
Document Lastmod2018-08-30 03:16:11
Document TitleSZEM180800755201
Document CreatorPScript5.dll Version 5.2.2
Document Author: seven-sq_wu

Source Exif Data [exif.tools]:
File Type                       : PDF
File Type Extension             : pdf
MIME Type                       : application/pdf
PDF Version                     : 1.3
Linearized                      : No
Encryption                      : Standard V2.3 (128-bit)
User Access                     : Print, Print high-res
Page Count                      : 94
Create Date                     : 2018:08:30 11:16:05+08:00
Title                           : Microsoft Word - SZEM180800755201
Producer                        : GPL Ghostscript 8.64
Author                          : seven-sq_wu
Creator                         : PScript5.dll Version 5.2.2
Modify Date                     : 2018:08:30 03:16:11Z