FCC ID 2AEXE-Q30-22156759

Scanner

by Plustek Inc.

Grantee Code: 2AEXE   Product Code: Q3022156759
Latest application date: 2023-06-25

FCC ID Device Details

FCC ID2AEXE-Q30-22156759
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AEXE
Product CodeQ3022156759
Applicant BusinessPlustek Inc. 🇹🇼
Related Domains plustek.com.tw
Equipment ClassScanner
Test FirmGlobal United Technology Services Co. Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
2412-2462 MHzOriginal Equipment2023-06-25
5500-5700 MHzOriginal Equipment2023-06-25

Exhibits

DocumentTypeAvailableFile
U ManualUsers Manual2023-12-22PDF 1.7 MB
user manualUsers Manual2023-12-22PDF 1.7 MB
Internal Photos2Internal Photos2023-12-22PDF 4.6 MB
Internal PhotosInternal Photos2023-12-22PDF 5 MB
Internal Photos1Internal Photos2023-12-22PDF 5 MB
External PhotosExternal Photos2023-12-22PDF 308.8 KB
External photosExternal Photos2023-12-22PDF 308.8 KB
LabelID Label/Location Info2023-06-25PDF 130.9 KB
Label LocationID Label/Location Info2023-06-25PDF 260.8 KB
labelID Label/Location Info2023-06-25PDF 130.9 KB
T Setup photoTest Setup Photos2023-12-22PDF 191 KB
TestSetupPhotosTest Setup Photos2023-12-22PDF 191 KB
Antenna SpecificationTest Report2023-06-25PDF 678 KB
Antenna SpecificationsTest Report2023-06-25PDF 678 KB
CS AppendixforUNII part1Test Report2023-06-25PDF 5.4 MB
CS AppendixforUNII part2Test Report2023-06-25PDF 5.3 MB
CS AppendixforUNII part3Test Report2023-06-25PDF 5.7 MB
CS AppendixforUNII part4Test Report2023-06-25PDF 5.5 MB
CS AppendixforWIFI2.4G part1Test Report2023-06-25PDF 5.1 MB
CS AppendixforWIFI2.4G part2Test Report2023-06-25PDF 5.5 MB
DFS test reportTest Report2023-06-25PDF 759.4 KB
GTS2023010089F0115.247 WIFI2.4GTest Report2023-06-25PDF 1.3 MB
NIIbandI,bandII-2A,bandIITest Report2023-06-25PDF 1.4 MB
2.911 (d)(5)(i)CertificationEquipmentTypev1.2Attestation Statements2023-06-25PDF 285.8 KB
2.911 (d)(5)(ii)CertificiationApplicantv1.2Attestation Statements2023-06-25PDF 268.5 KB
2.911 (d)(7)USAgentforServiceofProcessv1.2Attestation Statements2023-06-25PDF 199.6 KB
2.911_(d)(7)USAAttestation Statements2023-06-25PDF 199.6 KB
Agent AuthorizationCover Letter(s)2023-06-25PDF 19.5 KB
Difference DescriptionCover Letter(s)2023-06-25PDF 69 KB
FCC Short_Long Term Confidentiality Request Rev4.1Cover Letter(s)2023-06-25PDF 107.5 KB
FCC Software Configuration Control Declaration Rev1.1Cover Letter(s)2023-06-25PDF 86.2 KB
Long_Term_ConfidentialityCover Letter(s)2023-06-25PDF 107.5 KB
MPERF Exposure Info2023-06-25PDF 115.2 KB
BlockDiagram Metadata onlyBlock DiagramPDF 66.1 KB
SCH Metadata onlySchematicsPDF 2.3 MB
OP Metadata onlyOperational DescriptionPDF 486.7 KB
Software Security Requirements For U-NII Devices Metadata onlySDR Software/Security InfPDF 455.7 KB

Application Information

Application IDwjhT/jzziRph1mjvHJq59A==
Final Action Date2023-06-25
Application PurposeOriginal Equipment
Applicant FRN0024638751
ModelQ30-22156759
Frequency Range2412-2462 MHz
Equipment ClassDTS - Digital Transmission System
Device DescriptionScanner
Responsible PartyRick Chu, rickchu@plustek.com.tw , 886-2-2655 7866
Technical ContactPlustek Inc., rickchu@plustek.com.tw
Test FirmRobinson Lo, Global United Technology Services Co. Ltd., robinson.lo@gtstest.com , 86-0-755-2779-8480
TCB Emailcertification@micomlabs.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date12/22/2023
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power listed is conducted power. This device contains 20 and 40 MHz signal bandwidth. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
wjhT/jzziRph1mjvHJq59A==2023-06-25Original Equipment
Pv9cDDTbzFS8hhU9DQdtPg==2023-06-25Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.053830015CCC
5180-5240 MHz0.0170615ECC
5260-5320 MHz0.0221815ECC, ND
5500-5700 MHz0.0146615ECC, ND

Grants

TCB Grant - Application wjhT/jzziRph1mjvHJq59A==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 06/25/2023

Application Dated: 06/25/2023
Plustek Inc.
13F-1, No. 3, Yuan Qu St., 115 Nankang
P.O. Box 115,
Taipei,
Taiwan
 
Attention: Rick Chu

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AEXE-Q30-22156759
Name of Grantee:  Plustek Inc.
Equipment Class: Digital Transmission System
Notes: Scanner
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.05383  

Output power listed is conducted power. This device contains 20 and 40 MHz signal bandwidth. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application wjhT/jzziRph1mjvHJq59A==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Plustek Inc.
13F-1, No. 3, Yuan Qu St., 115 Nankang P.O. Box 115,
Taipei,
Taiwan
  Date of Grant: 06/25/2023

Application Dated: 06/25/2023
 
Attention: Rick Chu

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AEXE-Q30-22156759
Name of Grantee:  Plustek Inc.
Equipment Class: Digital Transmission System
Notes: Scanner
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.05383  

Output power listed is conducted power. This device contains 20 and 40 MHz signal bandwidth. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application Pv9cDDTbzFS8hhU9DQdtPg==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 06/25/2023

Application Dated: 06/25/2023
Plustek Inc.
13F-1, No. 3, Yuan Qu St., 115 Nankang
P.O. Box 115,
Taipei,
Taiwan
 
Attention: Rick Chu

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AEXE-Q30-22156759
Name of Grantee:  Plustek Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Scanner
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.01706  
CC ND 15E 5260.0  -  5320.0 0.02218  
CC ND 15E 5500.0  -  5700.0 0.01466  

Output power listed is conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application Pv9cDDTbzFS8hhU9DQdtPg==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Plustek Inc.
13F-1, No. 3, Yuan Qu St., 115 Nankang P.O. Box 115,
Taipei,
Taiwan
  Date of Grant: 06/25/2023

Application Dated: 06/25/2023
 
Attention: Rick Chu

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AEXE-Q30-22156759
Name of Grantee:  Plustek Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Scanner
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.01706  
CC ND 15E 5260.0  -  5320.0 0.02218  
CC ND 15E 5500.0  -  5700.0 0.01466  

Output power listed is conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

Mail To: