FCC ID 2AEXE-A350-22156759

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

MiCOM Labs 575 Boulder Court Pleasanton, CA 94566

Date of Grant: 06/14/2023 Application Dated: 06/14/2023

Plustek Inc.

13F-1, No. 3, Yuan Qu St., 115 Nankang

P.O. Box 115,

Taipei, Taiwan

Attention: Rick Chu

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2AEXE-A350-22156759
Name of Grantee:	Plustek Inc.
Equipment Class:	Digital Transmission System
Notes:	Scanner, Plustek eScan

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2412.0  -  2462.0	0.11403

Output power listed is conducted power. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

CC:	This device is certified pursuant to two different Part 15 rules sections.

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Plustek Inc. 13F-1, No. 3, Yuan Qu St., 115 Nankang P.O. Box 115, Taipei, Taiwan

Date of Grant: 06/14/2023 Application Dated: 06/14/2023

Attention: Rick Chu

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2AEXE-A350-22156759
Name of Grantee:	Plustek Inc.
Equipment Class:	Digital Transmission System
Notes:	Scanner, Plustek eScan
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15C	2412.0  -  2462.0	0.11403

Output power listed is conducted power. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

CC:	This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application Hi7/MUbvMU8IqicT50xPPg==

Mail To:

TCB	GRANT OF EQUIPMENT AUTHORIZATION	TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

MiCOM Labs 575 Boulder Court Pleasanton, CA 94566

Date of Grant: 06/14/2023 Application Dated: 06/14/2023

Plustek Inc.

13F-1, No. 3, Yuan Qu St., 115 Nankang

P.O. Box 115,

Taipei, Taiwan

Attention: Rick Chu

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2AEXE-A350-22156759
Name of Grantee:	Plustek Inc.
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Scanner, Plustek eScan

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15E	5180.0  -  5240.0	0.01706
CC ND	15E	5260.0  -  5320.0	0.02831
CC	15E	5500.0  -  5700.0	0.02938

Output power listed is conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

CC:	This device is certified pursuant to two different Part 15 rules sections.
ND:	This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

COPY	FEDERAL COMMUNICATIONS COMMISSION WASHINGTON, D.C. 20554 GRANT OF EQUIPMENT AUTHORIZATION	COPY
Certification

Plustek Inc. 13F-1, No. 3, Yuan Qu St., 115 Nankang P.O. Box 115, Taipei, Taiwan

Date of Grant: 06/14/2023 Application Dated: 06/14/2023

Attention: Rick Chu

NOT TRANSFERABLE

EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.

FCC IDENTIFIER:	2AEXE-A350-22156759
Name of Grantee:	Plustek Inc.
Equipment Class:	Unlicensed National Information Infrastructure TX
Notes:	Scanner, Plustek eScan
Modular Type:	Does not apply

Grant Notes	FCC Rule Parts	Frequency Range (MHZ)	Output Watts	Frequency Tolerance	Emission Designator
CC	15E	5180.0  -  5240.0	0.01706
CC ND	15E	5260.0  -  5320.0	0.02831
CC	15E	5500.0  -  5700.0	0.02938

Output power listed is conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

CC:	This device is certified pursuant to two different Part 15 rules sections.
ND:	This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

Mail To: