FCC ID 2AEXE-A450-22156759

Scanner, Plustek eScan

by Plustek Inc.

Grantee Code: 2AEXE   Product Code: A45022156759
Latest application date: 2023-06-08

FCC ID Device Details

FCC ID2AEXE-A450-22156759
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AEXE
Product CodeA45022156759
Applicant BusinessPlustek Inc. 🇹🇼
Related Domains plustek.com.tw
Equipment ClassScanner, Plustek eScan
Test FirmGlobal United Technology Services Co. Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5500-5700 MHzOriginal Equipment2023-06-08
2412-2462 MHzOriginal Equipment2023-06-08

Exhibits

DocumentTypeAvailableFile
U ManualUsers Manual2023-12-06PDF 1.2 MB
User ManualUsers Manual2023-12-06PDF 1.2 MB
Internal Photos2Internal Photos2023-12-06PDF 5.5 MB
Internal Photos1Internal Photos2023-12-06PDF 5.6 MB
External PhotoExternal Photos2023-12-06PDF 328.9 KB
External PhotosExternal Photos2023-12-06PDF 328.9 KB
LabelID Label/Location Info2023-06-08PDF 160.4 KB
Label LocationID Label/Location Info2023-06-08PDF 235.1 KB
Label locationID Label/Location Info2023-06-08PDF 235.1 KB
labelID Label/Location Info2023-06-08PDF 160.4 KB
Test Setup PhotosTest Setup Photos2023-12-06PDF 200.2 KB
Antenna SpecificationTest Report2023-06-08PDF 699.1 KB
Appendix for WIFI 2.4G_1Test Report2023-06-08PDF 5.3 MB
Appendix for WIFI 2.4G_2Test Report2023-06-08PDF 5.6 MB
DFS test reportTest Report2023-06-08PDF 748.6 KB
Test Report15.247__WIFI 2.4GTest Report2023-06-08PDF 1.3 MB
Test ReportUNII band I,band II-2A,band II-2CTest Report2023-06-08PDF 1.4 MB
Test ReportUNII5G 1Test Report2023-06-08PDF 5.9 MB
Test ReportUNII5G 2Test Report2023-06-08PDF 5.7 MB
Test ReportUNII5G 3Test Report2023-06-08PDF 5.6 MB
Test ReportUNII5G 4Test Report2023-06-08PDF 5.5 MB
Test ReportUNII5G 5Test Report2023-06-08PDF 2 MB
2.911 (d)(5)(i)CertificationEquipmentTypev1.2Attestation Statements2023-06-08PDF 292.6 KB
2.911 (d)(5)(ii)CertificiationApplicantv1.2Attestation Statements2023-06-08PDF 271.7 KB
2.911 (d)(7)USAgentforServiceofProcessv1.2Attestation Statements2023-06-08PDF 206.3 KB
DifferencesDescriptionCover Letter(s)2023-06-08PDF 62.2 KB
FCC Long Term Only Confidentiality Request Rev4.1Cover Letter(s)2023-06-08PDF 110.6 KB
FCC Short_Long Term Confidentiality Request Rev4.1Cover Letter(s)2023-06-08PDF 110.6 KB
FCC Software Configuration Control Declaration Rev1.1Cover Letter(s)2023-06-08PDF 89.5 KB
FCCAgentAuthorizationCover Letter(s)2023-06-08PDF 22.8 KB
difference declarationCover Letter(s)2023-06-08PDF 62.2 KB
MPERF Exposure Info2023-06-08PDF 104.7 KB
BlockDiagram Metadata onlyBlock DiagramPDF 32.6 KB
SCH Metadata onlySchematicsPDF 376.7 KB
OP Metadata onlyOperational DescriptionPDF 488.2 KB
FCC Software Security Requirements for UNII devices Rev 2.1 Metadata onlySDR Software/Security InfPDF 452.5 KB

Application Information

Application IDlB3mnIPakd6TL0vh3X48Aw==
Final Action Date2023-06-08
Application PurposeOriginal Equipment
Applicant FRN0024638751
ModelA450-22156759
Frequency Range5500-5700 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionScanner, Plustek eScan
Responsible PartyRick Chu, rickchu@plustek.com.tw , 886-2-2655 7866
Technical ContactPlustek Inc., rickchu@plustek.com.tw
Test FirmRobinson Lo, Global United Technology Services Co. Ltd., robinson.lo@gtstest.com , 86-0-755-2779-8480
TCB Emailcertification@micomlabs.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date12/06/2023
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power listed is maximum conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
lB3mnIPakd6TL0vh3X48Aw==2023-06-08Original Equipment
QySGqZ1PRc/C544Oh/R50A==2023-06-08Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.066220015CCC
5180-5240 MHz0.0152115ECC
5260-5320 MHz0.0221815ECC, ND
5500-5700 MHz0.0105715ECC, ND

Grants

TCB Grant - Application QySGqZ1PRc/C544Oh/R50A==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 06/08/2023

Application Dated: 06/08/2023
Plustek Inc.
13F-1, No. 3, Yuan Qu St., 115 Nankang
P.O. Box 115,
Taipei,
Taiwan
 
Attention: Rick Chu

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AEXE-A450-22156759
Name of Grantee:  Plustek Inc.
Equipment Class: Digital Transmission System
Notes: Scanner, Plustek eScan
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.06622  

Power listed is the maximum conducted output power. This device contains 20 and 40 MHz signal bandwidth. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.

EAS Grant - Application QySGqZ1PRc/C544Oh/R50A==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Plustek Inc.
13F-1, No. 3, Yuan Qu St., 115 Nankang P.O. Box 115,
Taipei,
Taiwan
  Date of Grant: 06/08/2023

Application Dated: 06/08/2023
 
Attention: Rick Chu

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AEXE-A450-22156759
Name of Grantee:  Plustek Inc.
Equipment Class: Digital Transmission System
Notes: Scanner, Plustek eScan
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15C 2412.0  -  2462.0 0.06622  

Power listed is the maximum conducted output power. This device contains 20 and 40 MHz signal bandwidth. The antenna used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.

TCB Grant - Application lB3mnIPakd6TL0vh3X48Aw==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 06/08/2023

Application Dated: 06/08/2023
Plustek Inc.
13F-1, No. 3, Yuan Qu St., 115 Nankang
P.O. Box 115,
Taipei,
Taiwan
 
Attention: Rick Chu

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AEXE-A450-22156759
Name of Grantee:  Plustek Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Scanner, Plustek eScan
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.01521  
CC ND 15E 5260.0  -  5320.0 0.02218  
CC ND 15E 5500.0  -  5700.0 0.01057  

Output power listed is maximum conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

EAS Grant - Application lB3mnIPakd6TL0vh3X48Aw==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Plustek Inc.
13F-1, No. 3, Yuan Qu St., 115 Nankang P.O. Box 115,
Taipei,
Taiwan
  Date of Grant: 06/08/2023

Application Dated: 06/08/2023
 
Attention: Rick Chu

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AEXE-A450-22156759
Name of Grantee:  Plustek Inc.
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: Scanner, Plustek eScan
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC 15E 5180.0  -  5240.0 0.01521  
CC ND 15E 5260.0  -  5320.0 0.02218  
CC ND 15E 5500.0  -  5700.0 0.01057  

Output power listed is maximum conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. The antenna used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
ND: This UNII device complies with the Transmit Power Control (TPC) and Dynamic Frequency Selection (DFS) requirements in Section 15.407(h).

Mail To: