FCC ID 2AF2V-X4

MoticamX4

by Motic China Group Co., LTD

Grantee Code: 2AF2V   Product Code: X4
Latest application date: 2022-03-31

FCC ID Device Details

FCC ID2AF2V-X4
Mirrorsfcc.id | gov | fccid.ai
Grantee Code2AF2V
Product CodeX4
Applicant BusinessMotic China Group Co., LTD 🇨🇳
Related Domains motic.com
Equipment ClassMoticamX4
Test FirmShenzhen CTB Testing Technology Co., Ltd.

Operating Frequencies

Frequency RangeApplication PurposeFinal Action Date
5745-5825 MHzOriginal Equipment2022-03-31
2412-2462 MHzOriginal Equipment2022-03-31

Exhibits

DocumentTypeAvailableFile
User ManualUsers Manual2022-09-27PDF 808.4 KB
User manualUsers Manual2022-09-27PDF 808.4 KB
Int photoInternal Photos2022-03-31PDF 3.3 MB
Ext photoExternal Photos2022-03-31PDF 1.5 MB
labelID Label/Location Info2022-03-31PDF 362.3 KB
Test photoTest Setup Photos2022-03-31PDF 857.4 KB
test photoTest Setup Photos2022-03-31PDF 857.4 KB
test reportTest Report2022-03-31PDF 5.4 MB
test reportTest Report2022-03-31PDF 3.1 MB
Agent AuthorizationCover Letter(s)2022-03-31PDF 129.8 KB
FCC Confidentiality RequestCover Letter(s)2022-03-31PDF 121.3 KB
FCC Short & Long Term Confidentiality RequestCover Letter(s)2022-03-31PDF 121.3 KB
FCC Software Configuration Control DeclarationCover Letter(s)2022-03-31PDF 112.6 KB
MPE reportRF Exposure Info2022-03-31PDF 165.1 KB
RF ExposureRF Exposure Info2022-03-31PDF 165.1 KB
Block Metadata onlyBlock DiagramPDF 454.5 KB
SCH Metadata onlySchematicsPDF 295.8 KB
OP Metadata onlyOperational DescriptionPDF 77 KB
SOFTWARE SECURITY DESCRIPTION Metadata onlySDR Software/Security InfPDF 155 KB

Application Information

Application IDNqXA51CKmbhgd5ATMFstoQ==
Final Action Date2022-03-31
Application PurposeOriginal Equipment
Applicant FRN0024912099
ModelX4
Frequency Range5745-5825 MHz
Equipment ClassNII - Unlicensed National Information Infrastructure TX
Device DescriptionMoticamX4
Responsible PartyLiyang Chen, Purchaser, chenly@motic.com , 0592-5698248
Technical ContactMotic China Group Co., Ltd., tujx@motic.com
Test FirmSimon Lee, Shenzhen CTB Testing Technology Co., Ltd., simon@ctb-lab.com , 86 13662574496
TCB Emailcertification@micomlabs.com
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
Short-Term ConfidentialityYes
Short-Term Confidentiality Date09/27/2022
Long-Term ConfidentialityYes
Grant DeferralNo
Modular EquipmentDoes not apply
Composite DeviceYes
Composite PartNo
Cognitive RadioNo
Authorization WaiverNo
Authorization Waiver ApprovedNo
Section 5301 CertificationYes
Related OET Knowledge DataBase InquiryNo
Grant CommentsOutput power listed is maximum combined conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

Applications

Application IDDatePurpose
NqXA51CKmbhgd5ATMFstoQ==2022-03-31Original Equipment
G+24+tVzc+IcUYY7QnMcaQ==2022-03-31Original Equipment

Equipment Authorization

FrequencyOutputRulesGrant Notes
2412-2462 MHz0.005559015CCC, MO
5745-5825 MHz0.005248015E38, CC, MO

Grants

TCB Grant - Application NqXA51CKmbhgd5ATMFstoQ==

TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 03/31/2022

Application Dated: 03/31/2022
Motic China Group Co., LTD
Motic Building,
Torch Hi-Tech Industrial Development Zone,
Xiamen,
China
 
Attention: Liyang Chen , Purchaser

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AF2V-X4
Name of Grantee:  Motic China Group Co., LTD
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: MoticamX4
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5745.0  -  5825.0 0.005248  

Output power listed is maximum combined conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application NqXA51CKmbhgd5ATMFstoQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Motic China Group Co., LTD
Motic Building, Torch Hi-Tech Industrial Development Zone,
Xiamen,
China
  Date of Grant: 03/31/2022

Application Dated: 03/31/2022
 
Attention: Liyang Chen , Purchaser

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AF2V-X4
Name of Grantee:  Motic China Group Co., LTD
Equipment Class: Unlicensed National Information Infrastructure TX
Notes: MoticamX4
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
38 CC MO 15E 5745.0  -  5825.0 0.005248  

Output power listed is maximum combined conducted power. This device contains 20, 40 and 80 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.


38: This device has shown compliance, in all grant-listed U-NII sub-bands, with the new rules for U-NII devices adopted under Docket No. 13-49 and may be marketed, manufactured or imported after the June 1, 2016 transition deadline.
CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

TCB Grant - Application G+24+tVzc+IcUYY7QnMcaQ==

Mail To:
TCB GRANT OF EQUIPMENT
AUTHORIZATION
TCB
Certification
Issued Under the Authority of the
Federal Communications Commission
By:

  MiCOM Labs
575 Boulder Court
Pleasanton, CA 94566
Date of Grant: 03/31/2022

Application Dated: 03/31/2022
Motic China Group Co., LTD
Motic Building,
Torch Hi-Tech Industrial Development Zone,
Xiamen,
China
 
Attention: Liyang Chen , Purchaser

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AF2V-X4
Name of Grantee:  Motic China Group Co., LTD
Equipment Class: Digital Transmission System
Notes: MoticamX4
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.005559  

Output power listed is maximum combined conducted power. This device contains 20 and 40 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.

CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

EAS Grant - Application G+24+tVzc+IcUYY7QnMcaQ==

COPY FEDERAL COMMUNICATIONS
COMMISSION
WASHINGTON, D.C. 20554

GRANT OF EQUIPMENT
AUTHORIZATION
COPY
Certification

Motic China Group Co., LTD
Motic Building, Torch Hi-Tech Industrial Development Zone,
Xiamen,
China
  Date of Grant: 03/31/2022

Application Dated: 03/31/2022
 
Attention: Liyang Chen , Purchaser

NOT TRANSFERABLE
EQUIPMENT AUTHORIZATION is hereby issued to the named GRANTEE, and is VALID ONLY for the equipment identified hereon for use under the Commission's Rules and Regulations listed below.
 
FCC IDENTIFIER:  2AF2V-X4
Name of Grantee:  Motic China Group Co., LTD
Equipment Class: Digital Transmission System
Notes: MoticamX4
Modular Type: Does not apply
Grant Notes  FCC Rule Parts Frequency
Range (MHZ)
Output
Watts
Frequency
Tolerance
Emission
Designator
CC MO 15C 2412.0  -  2462.0 0.005559  

Output power listed is maximum combined conducted power. This device contains 20 and 40 MHz signal bandwidth. Device is a 2x2 MIMO as is described in the filing. The antennas used with this transmitter must be installed to provide a minimum separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter, except in accordance with FCC multi- transmitter product procedures. End-users must be provided with operating procedures for satisfying RF exposure compliance.


CC: This device is certified pursuant to two different Part 15 rules sections.
MO: This Multiple Input Multiple Output (MIMO) device was evaluated for multiple transmitted signals as indicated in the filing.

Mail To: